diff options
Diffstat (limited to 'include/configs/TOP860.h')
| -rw-r--r-- | include/configs/TOP860.h | 144 |
1 files changed, 72 insertions, 72 deletions
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index b270832..8c2befb 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -60,7 +60,7 @@ * CLOCK settings */ #define CONFIG_SYSCLK 49152000 -#define CFG_XTAL 32768 +#define CONFIG_SYS_XTAL 32768 #define CONFIG_EBDF 1 #define CONFIG_COM 3 #define CONFIG_RTC_MPC8xx @@ -68,32 +68,32 @@ /*----------------------------------------------------------------------- * Physical memory map as defined by EMK */ -#define CFG_IMMR 0xFFF00000 /* Internal Memory Mapped Register */ -#define CFG_FLASH_BASE 0x80000000 /* FLASH in final mapping */ -#define CFG_DRAM_BASE 0x00000000 /* DRAM in final mapping */ -#define CFG_FLASH_MAX 0x00400000 /* max FLASH to expect */ -#define CFG_DRAM_MAX 0x01000000 /* max DRAM to expect */ +#define CONFIG_SYS_IMMR 0xFFF00000 /* Internal Memory Mapped Register */ +#define CONFIG_SYS_FLASH_BASE 0x80000000 /* FLASH in final mapping */ +#define CONFIG_SYS_DRAM_BASE 0x00000000 /* DRAM in final mapping */ +#define CONFIG_SYS_FLASH_MAX 0x00400000 /* max FLASH to expect */ +#define CONFIG_SYS_DRAM_MAX 0x01000000 /* max DRAM to expect */ /*----------------------------------------------------------------------- * derived values */ -#define CFG_MF (CONFIG_SYSCLK/CFG_XTAL) -#define CFG_CPUCLOCK CONFIG_SYSCLK -#define CFG_BRGCLOCK CONFIG_SYSCLK -#define CFG_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_MF (CONFIG_SYSCLK/CONFIG_SYS_XTAL) +#define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK +#define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK +#define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI /*----------------------------------------------------------------------- * Command interpreter @@ -105,7 +105,7 @@ /* * Allow partial commands to be matched to uniqueness. */ -#define CFG_MATCH_PARTIAL_CMD +#define CONFIG_SYS_MATCH_PARTIAL_CMD /* @@ -126,34 +126,34 @@ #define CONFIG_AUTOSCRIPT 1 -#define CFG_LOADS_BAUD_CHANGE 1 +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 #undef CONFIG_LOADS_ECHO /* NO echo on for serial download */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#undef CFG_HUSH_PARSER /* Hush parse for U-Boot */ +#undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot */ -#ifdef CFG_HUSH_PARSER - #define CFG_PROMPT_HUSH_PS2 "> " +#ifdef CONFIG_SYS_HUSH_PARSER + #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif #if defined(CONFIG_CMD_KGDB) - #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ + #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else - #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ + #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ /*----------------------------------------------------------------------- * Memory Test Command */ -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ /*----------------------------------------------------------------------- * Environment handler @@ -163,16 +163,16 @@ #define CONFIG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */ #define CONFIG_ENV_OFFSET 0x1000 #define CONFIG_ENV_SIZE 0x0700 -#define CFG_I2C_EEPROM_ADDR 0x57 -#define CFG_FACT_OFFSET 0x1800 -#define CFG_FACT_SIZE 0x0800 -#define CFG_I2C_FACT_ADDR 0x57 -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_I2C_EEPROM_ADDR_LEN 2 -#define CFG_EEPROM_SIZE 0x2000 -#define CFG_I2C_SPEED 100000 -#define CFG_I2C_SLAVE 0xFE -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 12 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_FACT_OFFSET 0x1800 +#define CONFIG_SYS_FACT_SIZE 0x0800 +#define CONFIG_SYS_I2C_FACT_ADDR 0x57 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_SIZE 0x2000 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0xFE +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12 #define CONFIG_ENV_OVERWRITE #define CONFIG_MISC_INIT_R @@ -195,7 +195,7 @@ #define I2C_TRISTATE { __I2C_DIR &= ~SDA; } #endif -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /*----------------------------------------------------------------------- * defines we need to get FEC running @@ -203,7 +203,7 @@ #define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */ #define CONFIG_FEC_ENET 1 /* Ethernet only via FEC */ #define FEC_ENET 1 /* eth.c needs it that way... */ -#define CFG_DISCOVER_PHY 1 +#define CONFIG_SYS_DISCOVER_PHY 1 #define CONFIG_MII 1 #define CONFIG_MII_INIT 1 #define CONFIG_PHY_ADDR 31 @@ -211,35 +211,35 @@ /*----------------------------------------------------------------------- * adresses */ -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0x80000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x2f00 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ -#define CFG_INIT_VPD_OFFSET (CFG_GBL_DATA_OFFSET - CFG_INIT_VPD_SIZE) -#define CFG_INIT_SP_OFFSET (CFG_INIT_VPD_OFFSET-8) +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x2f00 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ +#define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif /* Interrupt level assignments. @@ -259,7 +259,7 @@ *----------------------------------------------------------------------- * */ -#define CFG_DER 0 /* used in start.S */ +#define CONFIG_SYS_DER 0 /* used in start.S */ /*----------------------------------------------------------------------- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 @@ -279,7 +279,7 @@ * 1 FIOPD 0 Force I/O pull down * 5 0 00000 */ -#define CFG_PLPRCR (PLPRCR_TEXPS | ((CFG_MF-1)<<20)) +#define CONFIG_SYS_PLPRCR (PLPRCR_TEXPS | ((CONFIG_SYS_MF-1)<<20)) /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 @@ -296,10 +296,10 @@ * 1 SWP 0/1 Software watchdog prescale (1=/2048) */ #if defined (CONFIG_WATCHDOG) - #define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) #else - #define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF) + #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF) #endif /*----------------------------------------------------------------------- @@ -328,21 +328,21 @@ * 1 B3DD 0 Bank 3 double drive * 4 0 0000 */ -#define CFG_SIUMCR (SIUMCR_MLRC11) +#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC11) /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ -#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 11-31 *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled */ -#define CFG_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) +#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register 15-27 @@ -367,9 +367,9 @@ */ #define SCCR_MASK 0 #ifdef CONFIG_EBDF - #define CFG_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01) + #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01) #else - #define CFG_SCCR (SCCR_COM11 | SCCR_TBS) + #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS) #endif /*----------------------------------------------------------------------- @@ -378,9 +378,9 @@ * Preliminary Values */ /* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1 */ -#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR) -#define CFG_OR0_PRELIM (-CFG_FLASH_MAX | CFG_OR_TIMING_FLASH) -#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V ) +#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR) +#define CONFIG_SYS_OR0_PRELIM (-CONFIG_SYS_FLASH_MAX | CONFIG_SYS_OR_TIMING_FLASH) +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V ) /*----------------------------------------------------------------------- * misc @@ -428,15 +428,15 @@ /*----------------------------------------------------------------------- * Defaults for Autoscript */ -#define CFG_LOAD_ADDR 0x00100000 /* default load address */ -#define CFG_TFTP_LOADADDR 0x00100000 +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ +#define CONFIG_SYS_TFTP_LOADADDR 0x00100000 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #endif /* __CONFIG_H */ |