summaryrefslogtreecommitdiff
path: root/include/configs/Sandpoint8245.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/Sandpoint8245.h')
-rw-r--r--include/configs/Sandpoint8245.h284
1 files changed, 142 insertions, 142 deletions
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index 41835f0..8cb920e 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -78,14 +78,14 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP 1 /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x00100000 /* default load address */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* PCI stuff
@@ -97,7 +97,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NATSEMI
#define CONFIG_NS8382X
@@ -110,58 +110,58 @@
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_MAX_RAM_SIZE 0x10000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
-#define CFG_RESET_ADDRESS 0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
#if defined (USE_DINK32)
-#define CFG_MONITOR_LEN 0x00030000
-#define CFG_MONITOR_BASE 0x00090000
-#define CFG_RAMBOOT 1
-#define CFG_INIT_RAM_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_INIT_RAM_END 0x10000
-#define CFG_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_LEN 0x00030000
+#define CONFIG_SYS_MONITOR_BASE 0x00090000
+#define CONFIG_SYS_RAMBOOT 1
+#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_INIT_RAM_END 0x10000
+#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#else
-#undef CFG_RAMBOOT
-#define CFG_MONITOR_LEN 0x00030000
-#define CFG_MONITOR_BASE TEXT_BASE
+#undef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN 0x00030000
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-/*#define CFG_GBL_DATA_SIZE 256*/
-#define CFG_GBL_DATA_SIZE 128
+/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/
+#define CONFIG_SYS_GBL_DATA_SIZE 128
-#define CFG_INIT_RAM_ADDR 0x40000000
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_END 0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#endif
-#define CFG_FLASH_BASE 0xFFF00000
+#define CONFIG_SYS_FLASH_BASE 0xFFF00000
#if 0
-#define CFG_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */
+#define CONFIG_SYS_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */
#else
-#define CFG_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */
+#define CONFIG_SYS_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */
#endif
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
-#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
-#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
-#define CFG_EUMB_ADDR 0xFC000000
+#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CFG_ISA_MEM 0xFD000000
-#define CFG_ISA_IO 0xFE000000
+#define CONFIG_SYS_ISA_MEM 0xFD000000
+#define CONFIG_SYS_ISA_IO 0xFE000000
-#define CFG_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
-#define CFG_FLASH_RANGE_SIZE 0x01000000
+#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
+#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000
#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */
#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */
@@ -174,8 +174,8 @@
*/
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
#ifdef CONFIG_SOFT_I2C
#error "Soft I2C is not configured properly. Please review!"
@@ -190,13 +190,13 @@
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
#endif /* CONFIG_SOFT_I2C */
-#define CFG_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
-#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CFG_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
@@ -204,52 +204,52 @@
#define CONFIG_WINBOND_83C553 1 /*has a winbond bridge */
-#define CFG_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
-#define CFG_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
-#define CFG_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
+#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
+#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
+#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
-#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */
-#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
+#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
/*
* NS87308 Configuration
*/
#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */
-#define CFG_NS87308_BADDR_10 1
+#define CONFIG_SYS_NS87308_BADDR_10 1
-#define CFG_NS87308_DEVS ( CFG_NS87308_UART1 | \
- CFG_NS87308_UART2 | \
- CFG_NS87308_POWRMAN | \
- CFG_NS87308_RTC_APC )
+#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \
+ CONFIG_SYS_NS87308_UART2 | \
+ CONFIG_SYS_NS87308_POWRMAN | \
+ CONFIG_SYS_NS87308_RTC_APC )
-#undef CFG_NS87308_PS2MOD
+#undef CONFIG_SYS_NS87308_PS2MOD
-#define CFG_NS87308_CS0_BASE 0x0076
-#define CFG_NS87308_CS0_CONF 0x30
-#define CFG_NS87308_CS1_BASE 0x0075
-#define CFG_NS87308_CS1_CONF 0x30
-#define CFG_NS87308_CS2_BASE 0x0074
-#define CFG_NS87308_CS2_CONF 0x30
+#define CONFIG_SYS_NS87308_CS0_BASE 0x0076
+#define CONFIG_SYS_NS87308_CS0_CONF 0x30
+#define CONFIG_SYS_NS87308_CS1_BASE 0x0075
+#define CONFIG_SYS_NS87308_CS1_CONF 0x30
+#define CONFIG_SYS_NS87308_CS2_BASE 0x0074
+#define CONFIG_SYS_NS87308_CS2_CONF 0x30
/*
* NS16550 Configuration
*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_REG_SIZE 1
#if (CONFIG_CONS_INDEX > 2)
-#define CFG_NS16550_CLK CONFIG_DRAM_SPEED*1000000
+#define CONFIG_SYS_NS16550_CLK CONFIG_DRAM_SPEED*1000000
#else
-#define CFG_NS16550_CLK 1843200
+#define CONFIG_SYS_NS16550_CLK 1843200
#endif
-#define CFG_NS16550_COM1 (CFG_ISA_IO + CFG_NS87308_UART1_BASE)
-#define CFG_NS16550_COM2 (CFG_ISA_IO + CFG_NS87308_UART2_BASE)
-#define CFG_NS16550_COM3 (CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM4 (CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
+#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_EUMB_ADDR + 0x4600)
/*
* Low Level Configuration Settings
@@ -259,27 +259,27 @@
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-#define CFG_ROMNAL 7 /*rom/flash next access time */
-#define CFG_ROMFAL 11 /*rom/flash access time */
+#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */
+#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */
-#define CFG_REFINT 430 /* no of clock cycles between CBR refresh cycles */
+#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */
/* the following are for SDRAM only*/
-#define CFG_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
-#define CFG_REFREC 8 /* Refresh to activate interval */
-#define CFG_RDLAT 4 /* data latency from read command */
-#define CFG_PRETOACT 3 /* Precharge to activate interval */
-#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CFG_ACTORW 3 /* Activate to R/W */
-#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
+#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
+#define CONFIG_SYS_RDLAT 4 /* data latency from read command */
+#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
+#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
+#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
+#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
#if 0
-#define CFG_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
+#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
#endif
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM 1
+#define CONFIG_SYS_REGDIMM 0
/* memory bank settings*/
@@ -289,93 +289,93 @@
* bits will be set to 0x00000 for a start address, or 0xfffff for an
* end address
*/
-#define CFG_BANK0_START 0x00000000
-#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE 1
-#define CFG_BANK1_START 0x3ff00000
-#define CFG_BANK1_END 0x3fffffff
-#define CFG_BANK1_ENABLE 0
-#define CFG_BANK2_START 0x3ff00000
-#define CFG_BANK2_END 0x3fffffff
-#define CFG_BANK2_ENABLE 0
-#define CFG_BANK3_START 0x3ff00000
-#define CFG_BANK3_END 0x3fffffff
-#define CFG_BANK3_ENABLE 0
-#define CFG_BANK4_START 0x00000000
-#define CFG_BANK4_END 0x00000000
-#define CFG_BANK4_ENABLE 0
-#define CFG_BANK5_START 0x00000000
-#define CFG_BANK5_END 0x00000000
-#define CFG_BANK5_ENABLE 0
-#define CFG_BANK6_START 0x00000000
-#define CFG_BANK6_END 0x00000000
-#define CFG_BANK6_ENABLE 0
-#define CFG_BANK7_START 0x00000000
-#define CFG_BANK7_END 0x00000000
-#define CFG_BANK7_ENABLE 0
+#define CONFIG_SYS_BANK0_START 0x00000000
+#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE 1
+#define CONFIG_SYS_BANK1_START 0x3ff00000
+#define CONFIG_SYS_BANK1_END 0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE 0
+#define CONFIG_SYS_BANK2_START 0x3ff00000
+#define CONFIG_SYS_BANK2_END 0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE 0
+#define CONFIG_SYS_BANK3_START 0x3ff00000
+#define CONFIG_SYS_BANK3_END 0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE 0
+#define CONFIG_SYS_BANK4_START 0x00000000
+#define CONFIG_SYS_BANK4_END 0x00000000
+#define CONFIG_SYS_BANK4_ENABLE 0
+#define CONFIG_SYS_BANK5_START 0x00000000
+#define CONFIG_SYS_BANK5_END 0x00000000
+#define CONFIG_SYS_BANK5_ENABLE 0
+#define CONFIG_SYS_BANK6_START 0x00000000
+#define CONFIG_SYS_BANK6_END 0x00000000
+#define CONFIG_SYS_BANK6_ENABLE 0
+#define CONFIG_SYS_BANK7_START 0x00000000
+#define CONFIG_SYS_BANK7_END 0x00000000
+#define CONFIG_SYS_BANK7_ENABLE 0
/*
* Memory bank enable bitmask, specifying which of the banks defined above
are actually present. MSB is for bank #7, LSB is for bank #0.
*/
-#define CFG_BANK_ENABLE 0x01
+#define CONFIG_SYS_BANK_ENABLE 0x01
-#define CFG_ODCR 0xff /* configures line driver impedances, */
+#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */
/* see 8240 book for bit definitions */
-#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
+#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
/* currently accessed page in memory */
/* see 8240 book for details */
/* SDRAM 0 - 256MB */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
/* stack in DCACHE @ 1GB (no backing mem) */
#if defined(USE_DINK32)
-#define CFG_IBAT1L (0x40000000 | BATL_PP_00 )
-#define CFG_IBAT1U (0x40000000 | BATU_BL_128K )
+#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 )
+#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K )
#else
-#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#endif
/* PCI memory */
-#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
/* Flash, config addrs, etc */
-#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L CFG_IBAT0L
-#define CFG_DBAT0U CFG_IBAT0U
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
#if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif