summaryrefslogtreecommitdiff
path: root/include/configs/SMN42.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/SMN42.h')
-rw-r--r--include/configs/SMN42.h62
1 files changed, 31 insertions, 31 deletions
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
index 45fe14b..45e6a58 100644
--- a/include/configs/SMN42.h
+++ b/include/configs/SMN42.h
@@ -49,8 +49,8 @@
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
@@ -80,13 +80,13 @@
#undef CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
/* this would be 0xAE if E0, E1 and E2 were pulled high */
-#define CFG_I2C_SLAVE 0xA0
-#define CFG_I2C_EEPROM_ADDR (0xA0 >> 1)
-#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
-#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+#define CONFIG_SYS_I2C_SLAVE 0xA0
+#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA0 >> 1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
/* not used but required by devices.c */
-#define CFG_I2C_SPEED 10000
+#define CONFIG_SYS_I2C_SPEED 10000
#ifdef CONFIG_SOFT_I2C
/*
@@ -129,26 +129,26 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "SMN42 # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "SMN42 # " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x81800000 /* memtest works on */
-#define CFG_MEMTEST_END 0x83000000 /* 24 MB in SRAM */
+#define CONFIG_SYS_MEMTEST_START 0x81800000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x83000000 /* 24 MB in SRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0x81000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
/* for uClinux img is here*/
-#define CFG_SYS_CLK_FREQ 58982400 /* Hz */
-#define CFG_HZ 2048 /* decrementer freq in Hz */
+#define CONFIG_SYS_SYS_CLK_FREQ 58982400 /* Hz */
+#define CONFIG_SYS_HZ 2048 /* decrementer freq in Hz */
/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*-----------------------------------------------------------------------
* Stack sizes
@@ -177,23 +177,23 @@
*/
/*
- * The first entry in CFG_FLASH_BANKS_LIST is a dummy, but it must be present.
+ * The first entry in CONFIG_SYS_FLASH_BANKS_LIST is a dummy, but it must be present.
*/
-#define CFG_FLASH_BANKS_LIST { 0, PHYS_FLASH_1 }
-#define CFG_FLASH_ADDR0 0x555
-#define CFG_FLASH_ADDR1 0x2AA
-#define CFG_FLASH_ERASE_TOUT 16384 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_BANKS_LIST { 0, PHYS_FLASH_1 }
+#define CONFIG_SYS_FLASH_ADDR0 0x555
+#define CONFIG_SYS_FLASH_ADDR1 0x2AA
+#define CONFIG_SYS_FLASH_ERASE_TOUT 16384 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CONFIG_ENV_IS_IN_FLASH 1
/* The Environment Sector is in the CPU-internal flash */
-#define CFG_FLASH_BASE 0
+#define CONFIG_SYS_FLASH_BASE 0
#define CONFIG_ENV_OFFSET 0x3C000
-#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
#define CONFIG_CMDLINE_TAG