diff options
Diffstat (limited to 'include/configs/PPChameleonEVB.h')
| -rw-r--r-- | include/configs/PPChameleonEVB.h | 50 |
1 files changed, 9 insertions, 41 deletions
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index be36ff4..7c7b98c 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -55,47 +55,17 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#if 0 -#define CONFIG_PREBOOT \ - "crc32 f0207004 ffc 0;" \ - "if cmp 0 f0207000 1;" \ - "then;echo Old CRC is correct;crc32 f0207004 ff4 f0207000;" \ - "else;echo Old CRC is bad;fi" -#endif - #undef CONFIG_BOOTARGS -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off;" \ - "bootm ffc00000 ffca0000" -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off;" \ - "bootm ffc00000" - -#define CONFIG_PELK_NOR_KERNEL_NOR_RAMDISK_BOOTCOMMAND \ - "setenv ipaddr 192.168.10.203;" \ - "setenv serverip 192.168.10.6;" \ - "setenv netmask 255.255.255.0;" \ - "setenv bootargs root=/dev/ram rw console=ttyS0,9600;" \ - "setenv autostart yes;" \ - "bootm ffc00000 ffd00000" -/* - "setenv ethaddr 00:50:c2:1e:af:fe;" \ - "setenv eth1addr 00:50:c2:1e:af:fd;" \ -*/ -#define CONFIG_BOOTCOMMAND CONFIG_PELK_NOR_KERNEL_NOR_RAMDISK_BOOTCOMMAND +/* Ethernet stuff */ +#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */ +#define CONFIG_ETHADDR 00:50:c2:1e:af:fe +#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -/* EThernet stuff */ -#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */ -#define CONFIG_ETHADDR 00:50:c2:1e:af:fe -#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd - #undef CONFIG_EXT_PHY #define CONFIG_MII 1 /* MII PHY management */ @@ -548,18 +518,16 @@ #if 1 /* test-only */ #define CONFIG_NO_SERIAL_EEPROM /*#undef CONFIG_NO_SERIAL_EEPROM*/ -/*----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------*/ +/*--------------------------------------------------------------------*/ #ifdef CONFIG_NO_SERIAL_EEPROM /* -!------------------------------------------------------------------------------- +!----------------------------------------------------------------------- ! Defines for entry options. ! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that ! are plugged in the board will be utilized as non-ECC DIMMs. -!------------------------------------------------------------------------------- +!----------------------------------------------------------------------- */ #undef AUTO_MEMORY_CONFIG #define DIMM_READ_ADDR 0xAB @@ -678,10 +646,10 @@ #define PLL_PCIDIV_4 0x00000003 /* -!------------------------------------------------------------------------------- +!----------------------------------------------------------------------- ! PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, ! assuming a 33.3MHz input clock to the 405EP. -!------------------------------------------------------------------------------- +!----------------------------------------------------------------------- */ #define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ |