diff options
Diffstat (limited to 'include/configs/PM520.h')
| -rw-r--r-- | include/configs/PM520.h | 154 |
1 files changed, 146 insertions, 8 deletions
diff --git a/include/configs/PM520.h b/include/configs/PM520.h index a7d30f0..a91662c 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -35,6 +35,8 @@ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ +#define CONFIG_MISC_INIT_R + #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ @@ -82,11 +84,37 @@ #endif +/* Partitions */ +#define CONFIG_DOS_PARTITION + +/* USB */ +#if 1 +#define CONFIG_USB_OHCI +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_STORAGE +#else +#define ADD_USB_CMD 0 +#endif + +#if defined(CONFIG_BOOT_ROM) +#define ADD_DOC_CMD 0 +#else +#define ADD_DOC_CMD CFG_CMD_DOC +#endif + /* * Supported commands */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | ADD_PCI_CMD | \ - CFG_CMD_I2C | CFG_CMD_EEPROM | CFG_CMD_DATE) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EEPROM | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + ADD_DOC_CMD | \ + ADD_PCI_CMD | \ + CFG_CMD_DATE | \ + CFG_CMD_BEDBUG | \ + ADD_USB_CMD) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -95,8 +123,32 @@ * Autobooting */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=pm520\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk30/ppc_82xx\0" \ + "bootfile=/tftpboot/PM520/uImage\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" #if defined(CONFIG_MPC5200) /* @@ -128,11 +180,44 @@ #define CFG_I2C_RTC_ADDR 0x51 /* - * Flash configuration + * Disk-On-Chip configuration + */ + +#define CFG_DOC_SHORT_TIMEOUT +#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ + +#define CFG_DOC_SUPPORT_2000 +#define CFG_DOC_SUPPORT_MILLENNIUM +#define CFG_DOC_BASE 0xE0000000 +#define CFG_DOC_SIZE 0x00100000 + +#if defined(CONFIG_BOOT_ROM) +/* + * Flash configuration (8,16 or 32 MB) + * TEXT base always at 0xFFF00000 + * ENV_ADDR always at 0xFFF40000 + * FLASH_BASE at 0xFC000000 for 32 MB + * 0xFD000000 for 16 MB + * 0xFD800000 for 8 MB + */ +#define CFG_FLASH_BASE 0xfc000000 +#define CFG_FLASH_SIZE 0x02000000 +#define CFG_BOOTROM_BASE 0xFFF00000 +#define CFG_BOOTROM_SIZE 0x00080000 +#define CFG_ENV_ADDR (0xFDF00000 + 0x40000) +#else +/* + * Flash configuration (8,16 or 32 MB) + * TEXT base always at 0xFFF00000 + * ENV_ADDR always at 0xFFF40000 + * FLASH_BASE at 0xFE000000 for 32 MB + * 0xFF000000 for 16 MB + * 0xFF800000 for 8 MB */ -#define CFG_FLASH_BASE 0xff800000 -#define CFG_FLASH_SIZE 0x00800000 -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x740000) +#define CFG_FLASH_BASE 0xfe000000 +#define CFG_FLASH_SIZE 0x02000000 +#define CFG_ENV_ADDR (0xFFF00000 + 0x40000) +#endif #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ @@ -228,15 +313,68 @@ #define CFG_HID0_FINAL 0 #endif +#if defined(CONFIG_BOOT_ROM) +#define CFG_BOOTCS_START CFG_BOOTROM_BASE +#define CFG_BOOTCS_SIZE CFG_BOOTROM_SIZE +#define CFG_BOOTCS_CFG 0x00047800 +#define CFG_CS0_START CFG_BOOTROM_BASE +#define CFG_CS0_SIZE CFG_BOOTROM_SIZE +#define CFG_CS1_START CFG_FLASH_BASE +#define CFG_CS1_SIZE CFG_FLASH_SIZE +#define CFG_CS1_CFG 0x0004fb00 +#else #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE #define CFG_BOOTCS_CFG 0x0004fb00 #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE +#define CFG_CS1_START CFG_DOC_BASE +#define CFG_CS1_SIZE CFG_DOC_SIZE +#define CFG_CS1_CFG 0x00047800 +#endif #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333333 #define CFG_RESET_ADDRESS 0xff000000 +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00005000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#undef CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + #endif /* __CONFIG_H */ |