summaryrefslogtreecommitdiff
path: root/include/configs/PATI.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/PATI.h')
-rw-r--r--include/configs/PATI.h112
1 files changed, 56 insertions, 56 deletions
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index 42b155e..9d80ce4 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -87,28 +87,28 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */
#define CONFIG_PREBOOT
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "pati=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "pati=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00010000 /* memtest works on */
-#define CFG_MEMTEST_END 0x00A00000 /* 10 MB in SRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00010000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00A00000 /* 10 MB in SRAM */
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
/***********************************************************************
@@ -123,41 +123,41 @@
/*
* Internal Memory Mapped (This is not the IMMR content)
*/
-#define CFG_IMMR 0x01C00000 /* Physical start adress of internal memory map */
+#define CONFIG_SYS_IMMR 0x01C00000 /* Physical start adress of internal memory map */
/*
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
-#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
-#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial global data */
-#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
-#define CFG_INIT_SP_ADDR (CFG_IMMR + 0x03fa000) /* Physical start adress of inital stack */
+#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
+#define CONFIG_SYS_INIT_RAM_END (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial global data */
+#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IMMR + 0x03fa000) /* Physical start adress of inital stack */
/*
* Start addresses for the final memory configuration
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
-#define CFG_FLASH_BASE 0xffC00000 /* External flash */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
+#define CONFIG_SYS_FLASH_BASE 0xffC00000 /* External flash */
#define PCI_BASE 0x03000000 /* PCI Base (CS2) */
#define PCI_CONFIG_BASE 0x04000000 /* PCI & PLD (CS3) */
#define PLD_CONFIG_BASE 0x04001000 /* PLD (CS3) */
-#define CFG_MONITOR_BASE 0xFFF00000
-/* CFG_FLASH_BASE */ /* TEXT_BASE is defined in the board config.mk file. */
+#define CONFIG_SYS_MONITOR_BASE 0xFFF00000
+/* CONFIG_SYS_FLASH_BASE */ /* TEXT_BASE is defined in the board config.mk file. */
/* This adress is given to the linker with -Ttext to */
/* locate the text section at this adress. */
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 192 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 192 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_RESET_ADDRESS (PLD_CONFIG_BASE + 0x10) /* Adress which causes reset */
+#define CONFIG_SYS_RESET_ADDRESS (PLD_CONFIG_BASE + 0x10) /* Adress which causes reset */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
@@ -166,10 +166,10 @@
*
*/
-#define CFG_MAX_FLASH_BANKS 1 /* Max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* Max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
#define CONFIG_ENV_IS_IN_EEPROM
@@ -181,14 +181,14 @@
#undef CONFIG_ENV_IS_IN_FLASH
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SIZE 0x00002000 /* Set whole sector as env */
-#define CONFIG_ENV_OFFSET ((0 - CFG_FLASH_BASE) - CONFIG_ENV_SIZE) /* Environment starts at this adress */
+#define CONFIG_ENV_OFFSET ((0 - CONFIG_SYS_FLASH_BASE) - CONFIG_ENV_SIZE) /* Environment starts at this adress */
#endif
#define CONFIG_SPI 1
-#define CFG_SPI_CS_USED 0x09 /* CS0 and CS3 are used */
-#define CFG_SPI_CS_BASE 0x08 /* CS3 is active low */
-#define CFG_SPI_CS_ACT 0x00 /* CS3 is active low */
+#define CONFIG_SYS_SPI_CS_USED 0x09 /* CS0 and CS3 are used */
+#define CONFIG_SYS_SPI_CS_BASE 0x08 /* CS3 is active low */
+#define CONFIG_SYS_SPI_CS_ACT 0x00 /* CS3 is active low */
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control
* SYPCR can only be written once after reset!
@@ -197,10 +197,10 @@
*/
#undef CONFIG_WATCHDOG
#if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
#else
-#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
SYPCR_SWP)
#endif /* CONFIG_WATCHDOG */
@@ -209,14 +209,14 @@
*-----------------------------------------------------------------------
* Clear Reference Interrupt Status, Timebase freezing enabled
*/
-#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
/*-----------------------------------------------------------------------
* PISCR - Periodic Interrupt Status and Control
*-----------------------------------------------------------------------
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
*/
-#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register
@@ -225,7 +225,7 @@
* power management and some other internal clocks
*/
#define SCCR_MASK SCCR_EBDF00
-#define CFG_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \
+#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \
SCCR_COM01 | SCCR_DFNL000 | SCCR_DFNH000)
/*-----------------------------------------------------------------------
@@ -233,7 +233,7 @@
*-----------------------------------------------------------------------
* Data show cycle
*/
-#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle */
+#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle */
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register
@@ -241,47 +241,47 @@
* Set all bits to 40 Mhz
*
*/
-#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
+#define CONFIG_SYS_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
-#define CFG_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0)
+#define CONFIG_SYS_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0)
/*-----------------------------------------------------------------------
* UMCR - UIMB Module Configuration Register
*-----------------------------------------------------------------------
*
*/
-#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
+#define CONFIG_SYS_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
/*-----------------------------------------------------------------------
* ICTRL - I-Bus Support Control Register
*/
-#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
+#define CONFIG_SYS_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
/*-----------------------------------------------------------------------
* USIU - Memory Controller Register
*-----------------------------------------------------------------------
*/
-#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16 | BR_SETA)
-#define CFG_OR0_PRELIM (0xffc00000) /* SCY is not used if external TA is set */
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16 | BR_SETA)
+#define CONFIG_SYS_OR0_PRELIM (0xffc00000) /* SCY is not used if external TA is set */
/* SDRAM */
-#define CFG_BR1_PRELIM (CFG_SDRAM_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
-#define CFG_OR1_PRELIM (OR_ADDR_MK_FF) /* SCY is not used if external TA is set */
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_SDRAM_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
+#define CONFIG_SYS_OR1_PRELIM (OR_ADDR_MK_FF) /* SCY is not used if external TA is set */
/* PCI */
-#define CFG_BR2_PRELIM (PCI_BASE | BR_V | BR_PS_32 | BR_SETA)
-#define CFG_OR2_PRELIM (OR_ADDR_MK_FF)
+#define CONFIG_SYS_BR2_PRELIM (PCI_BASE | BR_V | BR_PS_32 | BR_SETA)
+#define CONFIG_SYS_OR2_PRELIM (OR_ADDR_MK_FF)
/* config registers: */
-#define CFG_BR3_PRELIM (PCI_CONFIG_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
-#define CFG_OR3_PRELIM (0xffff0000)
+#define CONFIG_SYS_BR3_PRELIM (PCI_CONFIG_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
+#define CONFIG_SYS_OR3_PRELIM (0xffff0000)
-#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* We don't realign the flash */
+#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* We don't realign the flash */
/*-----------------------------------------------------------------------
* DER - Timer Decrementer
*-----------------------------------------------------------------------
* Initialise to zero
*/
-#define CFG_DER 0x00000000
+#define CONFIG_SYS_DER 0x00000000
/*