summaryrefslogtreecommitdiff
path: root/include/configs/NETPHONE.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/NETPHONE.h')
-rw-r--r--include/configs/NETPHONE.h701
1 files changed, 0 insertions, 701 deletions
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
deleted file mode 100644
index 08cfc9e..0000000
--- a/include/configs/NETPHONE.h
+++ /dev/null
@@ -1,701 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETPHONE_VERSION) || CONFIG_NETPHONE_VERSION > 2
-#error Unsupported CONFIG_NETPHONE version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870 1 /* This is a MPC885 CPU */
-#define CONFIG_NETPHONE 1 /* ...on a NetPhone board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-
-/* #define CONFIG_XIN 10000000 */
-#define CONFIG_XIN 50000000
-/* #define MPC8XX_HZ 120000000 */
-#define MPC8XX_HZ 66666666
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define FEC_ENET 1 /* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#define CONFIG_RMII 1 /* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#if CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4 0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS 0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETPHONE_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#elif CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 66666666
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETPHONE_VERSION == 2
-
-#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */
-
-#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE 0x00010000 /* 64K */
-#define NAND_SIZE 0x00010000 /* 64K */
-
-#define DSP_BASE 0xF1000000
-#define NAND_BASE 0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define STATUS_LED_BIT 0x00000008 /* bit 28 */
-#elif CONFIG_NETPHONE_VERSION == 2
-#define STATUS_LED_BIT 0x00000080 /* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
- do { \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
- } while(0)
-
-#define __led_set(_msk, _st) \
- do { \
- if ((_st)) \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
- else \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
- } while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
- (V1) version 1 of the board
- (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
- Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- | # | Name | Type | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select
- | PA7 | DSP_INT | Output | DSP interrupt
- | PA10 | DSP_RESET | Output | DSP reset
- | PA14 | USBOE | Output | USB (1)
- | PA15 | USBRXD | Output | USB (1)
- | PB19 | BT_RTS | Output | Bluetooth (0)
- | PB23 | BT_CTS | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP | Output | Display chip select
- | PB28 | SPI_RXD_3V | Input | SPI Data Rx
- | PB29 | SPI_TXD | Output | SPI Data Tx
- | PB30 | SPI_CLK | Output | SPI Clock
- | PC10 | DISPA0 | Output | Display A0
- | PC11 | BACKLIGHT | Output | Display backlit
- | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD
- | | IO_RESET | Output | (V2) General I/O reset
- | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1)
- | | HOOK | Input | (V2) Hook input interrupt
- | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK
- | | F_RY_BY | Input | (V2) NAND F_RY_BY
- | PE17 | F_ALE | Output | NAND F_ALE
- | PE18 | F_CLE | Output | NAND F_CLE
- | PE20 | F_CE | Output | NAND F_CE
- | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select
- | | LED | Output | (V2) LED
- | PE27 | SPICS_ER | Output | External serial register CS
- | PE28 | LEDIO1 | Output | (V1) LED
- | | BKBR1 | Input | (V2) Keyboard input scan
- | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2)
- | | BKBR2 | Input | (V2) Keyboard input scan
- | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2)
- | | BKBR3 | Input | (V2) Keyboard input scan
- | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY
- | | BKBR4 | Input | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Serial register input:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | 0 | BKBR1 | (V1) Keyboard input scan
- | 1 | BKBR3 | (V1) Keyboard input scan
- | 2 | BKBR4 | (V1) Keyboard input scan
- | 3 | BKBR2 | (V1) Keyboard input scan
- | 4 | HOOK | (V1) Hook switch
- | 5 | BT_LINK | (V1) Bluetooth link status
- | 6 | HOST_WAKE | (V1) Bluetooth host wake up
- | 7 | OK_ETH | (V1) Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Serial register output:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | 0 | KEY1 | Keyboard output scan
- | 1 | KEY2 | Keyboard output scan
- | 2 | KEY3 | Keyboard output scan
- | 3 | KEY4 | Keyboard output scan
- | 4 | KEY5 | Keyboard output scan
- | 5 | KEY6 | Keyboard output scan
- | 6 | KEY7 | Keyboard output scan
- | 7 | BT_WAKE | Bluetooth wake up
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | CS0 | CS0 | Boot flash
- | CS1 | CS_FLASH | NAND flash
- | CS2 | CS_DSP | DSP
- | CS3 | DCS_DRAM | DRAM
- | CS4 | CS_FLASH2 | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP | DSP interrupt
- | IRQ3 | S_INTER | DUSLIC ???
- | IRQ4 | F_RY_BY | NAND
- | IRQ7 | IRQ_MAX | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT | PHY interrupt for #1
- | IP_A3| RMII2_MDINT | PHY interrupt for #2
- | IP_A5| HOST_WAKE | (V2) Bluetooth host wake
- | IP_A6| OK_ETH | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define CONFIG_SED156X 1 /* use SED156X */
-#define CONFIG_SED156X_PG12864Q 1 /* type of display used */
-
-/* serial interfacing macros */
-
-#define SED156X_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_RXD_MASK 0x00000008
-
-#define SED156X_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_TXD_MASK 0x00000004
-
-#define SED156X_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_CLK_MASK 0x00000002
-
-#define SED156X_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_CS_MASK 0x00000010
-
-#define SED156X_A0_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define SED156X_A0_MASK 0x0020
-
-/*************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_SHOW_ACTIVITY
-
-/*************************************************************************************************/
-
-/* phone console configuration */
-
-#define PHONE_CONSOLE_POLL_HZ (CONFIG_SYS_HZ/200) /* poll every 5ms */
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID 20
-#define CONFIG_CDP_DEVICE_ID_PREFIX "NP" /* netphone */
-#define CONFIG_CDP_PORT_ID "eth%d"
-#define CONFIG_CDP_CAPABILITIES 0x00000010
-#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM "Intracom NetPhone"
-#define CONFIG_CDP_TRIGGER 0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY 1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
-
-/*************************************************************************************************/
-#endif /* __CONFIG_H */