diff options
Diffstat (limited to 'include/configs/MPC8569MDS.h')
| -rw-r--r-- | include/configs/MPC8569MDS.h | 25 |
1 files changed, 12 insertions, 13 deletions
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 9620fd0..9e24e12 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -35,6 +35,9 @@ #define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */ +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ + #define CONFIG_PCI 1 /* Disable PCI/PCIE */ #define CONFIG_PCIE1 1 /* PCIE controller */ #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ @@ -122,7 +125,6 @@ extern unsigned long get_clock_freq(void); #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD -#define CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -263,12 +265,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_OR3_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ #endif -/* - * SDRAM on the LocalBus - */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - #define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -352,6 +348,7 @@ extern unsigned long get_clock_freq(void); * General PCI * Memory Addresses are mapped 1-1. I/O is mapped from 0 */ +#define CONFIG_SYS_PCIE1_NAME "Slot" #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 @@ -361,9 +358,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ -#define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000 -#define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000 -#define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000 +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xC0000000 +#define CONFIG_SYS_SRIO1_MEM_BUS 0xC0000000 +#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BUS +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ #ifdef CONFIG_QE /* @@ -561,6 +559,7 @@ extern unsigned long get_clock_freq(void); #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC +#define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC @@ -594,8 +593,8 @@ extern unsigned long get_clock_freq(void); * have to be in the first 16 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) - /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |