diff options
Diffstat (limited to 'include/configs/METROBOX.h')
| -rw-r--r-- | include/configs/METROBOX.h | 377 |
1 files changed, 377 insertions, 0 deletions
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h new file mode 100644 index 0000000..2b4a33f --- /dev/null +++ b/include/configs/METROBOX.h @@ -0,0 +1,377 @@ +/* + * (C) Copyright 2004 Sandburst Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * METROBOX.h - configuration Sandburst MetroBox + ***********************************************************************/ + +/* + * $Id: METROBOX.h,v 1.21 2005/06/03 15:05:25 tsawyer Exp $ + * + * + * $Log: METROBOX.h,v $ + * Revision 1.21 2005/06/03 15:05:25 tsawyer + * MB rev 2.0.3 KA rev 0.0.7. Add CONFIG_VERSION_VARIABLE, Add fakeled to MB + * + * Revision 1.20 2005/04/11 20:51:11 tsawyer + * fix ethernet + * + * Revision 1.19 2005/04/06 15:13:36 tsawyer + * Update appropriate files to coincide with u-boot 1.1.3 + * + * Revision 1.18 2005/03/10 14:16:02 tsawyer + * add def'n for cis8201 short etch option. + * + * Revision 1.17 2005/03/09 19:49:51 tsawyer + * Remove KGDB to allow use of 2nd serial port + * + * Revision 1.16 2004/12/02 19:00:23 tsawyer + * Add misc_init_f to turn on i2c-1 and all four fans before sdram init + * + * Revision 1.15 2004/09/15 18:04:12 tsawyer + * add multiple serial port support + * + * Revision 1.14 2004/09/03 15:27:51 tsawyer + * All metrobox boards are at 66.66 sys clock + * + * Revision 1.13 2004/08/05 20:27:46 tsawyer + * Remove system ace definitions, add net console support + * + * Revision 1.12 2004/07/29 20:00:13 tsawyer + * Add i2c bus 1 + * + * Revision 1.11 2004/07/21 13:44:18 tsawyer + * SystemACE is out, CF direct to local bus is in + * + * Revision 1.10 2004/06/29 19:08:55 tsawyer + * Add CONFIG_MISC_INIT_R + * + * Revision 1.9 2004/06/28 21:30:53 tsawyer + * Fix default BOOTARGS + * + * Revision 1.8 2004/06/17 15:51:08 tsawyer + * auto complete + * + * Revision 1.7 2004/06/17 15:08:49 tsawyer + * Add autocomplete + * + * Revision 1.6 2004/06/15 12:33:57 tsawyer + * debugging checkpoint + * + * Revision 1.5 2004/06/12 19:48:28 tsawyer + * Debugging checkpoint + * + * Revision 1.4 2004/06/02 13:03:06 tsawyer + * Fix eth addrs + * + * Revision 1.3 2004/05/18 19:56:10 tsawyer + * Change default bootcommand to pImage.metrobox + * + * Revision 1.2 2004/05/18 14:13:44 tsawyer + * Add bringup values for bootargs and bootcommand. + * Remove definition of ipaddress and serverip addresses. + * + * Revision 1.1 2004/04/16 15:08:54 tsawyer + * Initial Revision + * + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_METROBOX 1 /* Board is Metrobox */ +#define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ +#undef CFG_DRAM_TEST /* Disable-takes long time!*/ +#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ + +#define CONFIG_VERY_BIG_RAM 1 +#define CONFIG_VERSION_VARIABLE + +#define CONFIG_IDENT_STRING " Sandburst Metrobox" + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */ +#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ +#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */ +#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ + +#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000) +#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08200000) +#define CFG_BME32_BASE (CFG_PERIPHERAL_BASE + 0x08500000) +#define CFG_GPIO_BASE (CFG_PERIPHERAL_BASE + 0x00000700) + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE +#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ + +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +#define CFG_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_BAUDRATE 9600 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * NVRAM/RTC + * + * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. + * The DS1743 code assumes this condition (i.e. -- it assumes the base + * address for the RTC registers is: + * + * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE + * + *----------------------------------------------------------------------*/ +#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/ +#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 8 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */ + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/ +#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C hardware support */ +#undef CONFIG_SOFT_I2C /* I2C !bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed 400kHz */ +#define CFG_I2C_SLAVE 0x7F /* I2C slave address */ +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */ + + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */ +#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */ +#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ +#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */ + +#define CFG_ENV_SIZE 0x1000 /* Size of Env vars */ +#define CFG_ENV_ADDR (CFG_NVRAM_BASE_ADDR) + +#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none " +#define CONFIG_BOOTCOMMAND "tftp 8000000 pImage.metrobox;bootm 8000000" +#define CONFIG_BOOTDELAY 5 /* disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/*----------------------------------------------------------------------- + * Networking + *----------------------------------------------------------------------*/ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ +#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ +#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */ +#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH2 +#define CONFIG_HAS_ETH3 +#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */ +#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */ +#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */ +#define CONFIG_PHY_RESET_DELAY 1000 +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */ +#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */ +#define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ + + +/*----------------------------------------------------------------------- + * Console/Commands/Parser + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PCI | \ + CFG_CMD_IRQ | \ + CFG_CMD_I2C | \ + CFG_CMD_DHCP | \ + CFG_CMD_DATE | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_PING | \ + CFG_CMD_DIAG | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_ELF | \ + CFG_CMD_IDE | \ + CFG_CMD_FAT) + +/* tbs 09-March-2005 Removed to be able to use 2nd serial */ +/* CFG_CMD_KGDB | \ */ + + +/* Include NetConsole support */ +#define CONFIG_NETCONSOLE + +/* Include auto complete with tabs */ +#define CONFIG_AUTO_COMPLETE 1 +#define CFG_AUTO_COMPLETE 1 +#define CFG_ALT_MEMTEST 1 /* use real memory test */ + + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "MetroBox=> " /* Monitor Command Prompt */ + +#define CFG_HUSH_PARSER 1 /* HUSH for ext'd cli */ +#define CFG_PROMPT_HUSH_PS2 "> " + + +/*----------------------------------------------------------------------- + * Console Buffer + *----------------------------------------------------------------------*/ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) + /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of cmd args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg Buffer Size */ + +/*----------------------------------------------------------------------- + * Memory Test + *----------------------------------------------------------------------*/ +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +/*----------------------------------------------------------------------- + * Compact Flash (in true IDE mode) + *----------------------------------------------------------------------*/ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#define CFG_ATA_BASE_ADDR 0xF0000000 +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/ +#define CFG_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */ + +#define CFG_ATA_STRIDE 2 /* Directly connected CF, needs a stride + to get to the correct offset */ +#define CONFIG_DOS_PARTITION 1 /* Include dos partition */ + +/*----------------------------------------------------------------------- + * PCI + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices */ +#define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE) + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/ +#define CFG_PCI_TARGET_INIT /* let board init pci target*/ + +#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */ +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ +#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ +#endif + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CFG_LOAD_ADDR 0x8000000 /* default load address */ +#define CFG_EXTBDINFO 1 /* use extended board_info */ + +#define CFG_HZ 100 /* decr freq: 1 ms ticks */ + + +#endif /* __CONFIG_H */ |