diff options
Diffstat (limited to 'include/configs/M54451EVB.h')
| -rw-r--r-- | include/configs/M54451EVB.h | 73 |
1 files changed, 28 insertions, 45 deletions
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 45f7016..fa444c3 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -70,6 +70,7 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_NET +#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SPI @@ -93,7 +94,7 @@ # define MCFFEC_TOUT_LOOP 50000 # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ -# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" +# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 @@ -163,35 +164,33 @@ #define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_OFFSET 0x58000 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* DSPI and Serial Flash */ +#define CONFIG_CF_SPI #define CONFIG_CF_DSPI #define CONFIG_SERIAL_FLASH #define CONFIG_HARD_SPI -#define CONFIG_SYS_SER_FLASH_BASE 0x01000000 #define CONFIG_SYS_SBFHDR_SIZE 0x7 #ifdef CONFIG_CMD_SPI # define CONFIG_SPI_FLASH # define CONFIG_SPI_FLASH_STMICRO -# define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \ - DSPI_DCTAR_CPOL | \ - DSPI_DCTAR_CPHA | \ - DSPI_DCTAR_PCSSCK_1CLK | \ - DSPI_DCTAR_PASC(0) | \ - DSPI_DCTAR_PDT(0) | \ - DSPI_DCTAR_CSSCK(0) | \ - DSPI_DCTAR_ASC(0) | \ - DSPI_DCTAR_PBR(0) | \ - DSPI_DCTAR_DT(1) | \ - DSPI_DCTAR_BR(1)) +# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ + DSPI_CTAR_PCSSCK_1CLK | \ + DSPI_CTAR_PASC(0) | \ + DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(0) | \ + DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(1)) +# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0) +# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0) #endif /* Input, PCI, Flexbus, and VCO */ #define CONFIG_EXTRA_CLOCK -#define CONFIG_PRAM 2048 /* 2048 KB */ +#define CONFIG_PRAM 2048 /* 2048 KB */ #define CONFIG_SYS_PROMPT "-> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -209,7 +208,7 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000 +#define CONFIG_SYS_MBAR 0xFC000000 /* * Low Level Configuration Settings @@ -265,7 +264,7 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SYS_STMICRO_BOOT) # define CONFIG_ENV_IS_IN_SPI_FLASH 1 # define CONFIG_ENV_SPI_CS 1 # define CONFIG_ENV_OFFSET 0x20000 @@ -273,30 +272,21 @@ # define CONFIG_ENV_SECT_SIZE 0x10000 #else # define CONFIG_ENV_IS_IN_FLASH 1 -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000) -# define CONFIG_ENV_SECT_SIZE 0x2000 +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000) +# define CONFIG_ENV_SIZE 0x2000 +# define CONFIG_ENV_SECT_SIZE 0x8000 #endif #undef CONFIG_ENV_OVERWRITE #undef CONFIG_ENV_IS_EMBEDDED -/*----------------------------------------------------------------------- - * FLASH organization - */ -#ifdef CONFIG_SYS_STMICRO_BOOT -# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SER_FLASH_BASE -# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_SER_FLASH_BASE -# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS0_BASE -#endif -#ifdef CONFIG_SYS_SPANSION_BOOT -# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_SER_FLASH_BASE -#endif +/* FLASH organization */ +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE #define CONFIG_SYS_FLASH_CFI #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_FLASH_CFI_DRIVER 1 +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -311,27 +301,20 @@ * This is setting for JFFS2 support in u-boot. * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ -#ifdef CONFIG_SYS_SPANSION_BOOT -# define CONFIG_JFFS2_DEV "nor0" -# define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) -#endif -#ifdef CONFIG_SYS_STMICRO_BOOT +#ifdef CONFIG_CMD_JFFS2 # define CONFIG_JFFS2_DEV "nor0" # define CONFIG_JFFS2_PART_SIZE 0x01000000 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) #endif -/*----------------------------------------------------------------------- - * Cache Configuration - */ +/* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 /*----------------------------------------------------------------------- * Memory bank definitions */ /* - * CS0 - NOR Flash 8MB + * CS0 - NOR Flash 16MB * CS1 - Available * CS2 - Available * CS3 - Available @@ -339,10 +322,10 @@ * CS5 - Available */ - /* SPANSION Flash */ + /* Flash */ #define CONFIG_SYS_CS0_BASE 0x00000000 -#define CONFIG_SYS_CS0_MASK 0x007F0001 -#define CONFIG_SYS_CS0_CTRL 0x00001180 +#define CONFIG_SYS_CS0_MASK 0x00FF0001 +#define CONFIG_SYS_CS0_CTRL 0x00004D80 #define CONFIG_SYS_SPANSION_BASE CONFIG_SYS_CS0_BASE |