diff options
Diffstat (limited to 'include/configs/M54418TWR.h')
| -rw-r--r-- | include/configs/M54418TWR.h | 448 |
1 files changed, 448 insertions, 0 deletions
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h new file mode 100644 index 0000000..6c96111 --- /dev/null +++ b/include/configs/M54418TWR.h @@ -0,0 +1,448 @@ +/* + * Configuation settings for the Freescale MCF54418 TWR board. + * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M54418TWR_H +#define _M54418TWR_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF5441x /* define processor family */ +#define CONFIG_M54418 /* define processor type */ +#define CONFIG_M54418TWR /* M54418TWR board */ + +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#undef CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_UBI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_NAND_YAFFS +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#undef CONFIG_CMD_IMLS + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +/* + * NAND FLASH + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_JFFS2_NAND +#define CONFIG_NAND_FSL_NFC +#define CONFIG_SYS_NAND_BASE 0xFC0FC000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_NAND_SELECT_DEVICE +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#endif + +/* Network configuration */ +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1 +#define CONFIG_SYS_DISCOVER_PHY +#define CONFIG_SYS_RX_ETH_BUFFER 2 +#define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN +#define CONFIG_SYS_TX_ETH_BUFFER 2 +#define CONFIG_HAS_ETH1 + +#define CONFIG_SYS_FEC0_PINMUX 0 +#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +#define CONFIG_SYS_FEC1_PINMUX 0 +#define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE +#define MCFFEC_TOUT_LOOP 50000 +#define CONFIG_SYS_FEC0_PHYADDR 0 +#define CONFIG_SYS_FEC1_PHYADDR 1 + +#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ + +#ifdef CONFIG_SYS_NAND_BOOT +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \ + "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \ + "-(jffs2) console=ttyS0,115200" +#else +#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=" \ + __stringify(CONFIG_SERVERIP) ":/tftpboot/" \ + __stringify(CONFIG_IPADDR) " ip=" \ + __stringify(CONFIG_IPADDR) ":" \ + __stringify(CONFIG_SERVERIP)":" \ + __stringify(CONFIG_GATEWAYIP)": " \ + __stringify(CONFIG_NETMASK) \ + "::eth0:off:rw console=ttyS0,115200" +#endif + +#define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +#define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 +#define CONFIG_ETHPRIME "FEC0" +#define CONFIG_IPADDR 192.168.1.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 + +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SYS_FEC_BUF_USE_SRAM +/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ +#ifndef CONFIG_SYS_DISCOVER_PHY +#define FECDUPLEX FULL +#define FECSPEED _100BASET +#define LINKSTATUS 1 +#else +#define LINKSTATUS 0 +#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#endif +#endif /* CONFIG_SYS_DISCOVER_PHY */ +#endif + +#define CONFIG_HOSTNAME M54418TWR + +#if defined(CONFIG_CF_SBF) +/* ST Micro serial flash */ +#define CONFIG_SYS_LOAD_ADDR2 0x40010007 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "sbfhdr=sbfhdr.bin\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${sbfhdr};" \ + "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ + "upd=run load; run prog\0" \ + "prog=sf probe 0:1 1000000 3;" \ + "sf erase 0 40000;" \ + "sf write ${loadaddr} 0 40000;" \ + "save\0" \ + "" +#elif defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${u-boot};\0" \ + "upd=run load; run prog\0" \ + "prog=nand device 0;" \ + "nand erase 0 40000;" \ + "nb_update ${loadaddr} ${filesize};" \ + "save\0" \ + "" +#else +#define CONFIG_SYS_UBOOT_END 0x3FFFF +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off mram" " ;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" +#endif + +/* Realtime clock */ +#undef CONFIG_MCFRTC +#define CONFIG_RTC_MCFRRTC +#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2c */ +#undef CONFIG_FSL_I2C +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +/* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +/* DSPI and Serial Flash */ +#define CONFIG_CF_SPI +#define CONFIG_CF_DSPI +#define CONFIG_SERIAL_FLASH +#define CONFIG_HARD_SPI +#define CONFIG_SYS_SBFHDR_SIZE 0x7 +#ifdef CONFIG_CMD_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_ATMEL + +# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ + DSPI_CTAR_PCSSCK_1CLK | \ + DSPI_CTAR_PASC(0) | \ + DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(0) | \ + DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(1)) +# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0) +# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0) +#endif + +/* Input, PCI, Flexbus, and VCO */ +#define CONFIG_EXTRA_CLOCK + +#define CONFIG_PRAM 2048 /* 2048 KB */ + +/* HUSH */ +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_PROMPT "-> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +/* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 256 +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ + CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400) +#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) +#define CONFIG_SYS_DRAM_TEST + +#if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_SERIAL_BOOT +#endif + +#if defined(CONFIG_SERIAL_BOOT) +#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) +#else +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#endif + +#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) +/* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +/* Reserve 256 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (256 << 10) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \ + (CONFIG_SYS_SDRAM_SIZE << 20)) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#if !defined(CONFIG_SERIAL_BOOT) /*MRAM boot*/ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_MRAM 1 +#define CONFIG_ENV_ADDR (0x40000 - 0x1000) /*MRAM size 40000*/ +#define CONFIG_ENV_SIZE 0x1000 +#endif + +#if defined(CONFIG_CF_SBF) +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_ENV_SPI_CS 1 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#endif +#if defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x80000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#endif +#undef CONFIG_ENV_OVERWRITE + +/* FLASH organization */ +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE + +#undef CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI + +#define CONFIG_FLASH_CFI_DRIVER 1 +/* Max size that the board might have */ +#define CONFIG_SYS_FLASH_SIZE 0x1000000 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 270 +/* "Real" (hardware) sectors protection */ +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } +#else +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 270 +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 0 +#endif + +/* + * This is setting for JFFS2 support in u-boot. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. + */ +#ifdef CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_JFFS2_PART_OFFSET (0x800000) +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=m54418twr.nand" + +#define MTDPARTS_DEFAULT "mtdparts=m54418twr.nand:1m(data)," \ + "7m(kernel)," \ + "-(rootfs)" + +#endif + +#ifdef CONFIG_CMD_UBI +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts command */ +#define CONFIG_MTD_PARTITIONS /* mtdparts and UBI support */ +#define CONFIG_RBTREE +#define MTDIDS_DEFAULT "nand0=NAND" +#define MTDPARTS_DEFAULT "mtdparts=NAND:1m(u-boot)," \ + "-(ubi)" +#endif +/* Cache Configuration */ +#define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + +#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 12) + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ +/* + * CS0 - NOR Flash 16MB + * CS1 - Available + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ + + /* Flash */ +#define CONFIG_SYS_CS0_BASE 0x00000000 +#define CONFIG_SYS_CS0_MASK 0x000F0101 +#define CONFIG_SYS_CS0_CTRL 0x00001D60 + +#endif /* _M54418TWR_H */ |