summaryrefslogtreecommitdiff
path: root/include/configs/M5373EVB.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/M5373EVB.h')
-rw-r--r--include/configs/M5373EVB.h158
1 files changed, 79 insertions, 79 deletions
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 814c3a6..a1bc32a 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -38,9 +38,9 @@
#define CONFIG_M5373 /* define processor type */
#define CONFIG_MCFUART
-#define CFG_UART_PORT (0)
+#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */
@@ -64,29 +64,29 @@
# define CONFIG_CMD_NAND
#endif
-#define CFG_UNIFY_CACHE
+#define CONFIG_SYS_UNIFY_CACHE
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
-# define CFG_DISCOVER_PHY
-# define CFG_RX_ETH_BUFFER 8
-# define CFG_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_DISCOVER_PHY
+# define CONFIG_SYS_RX_ETH_BUFFER 8
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CFG_FEC0_PINMUX 0
-# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
+# define CONFIG_SYS_FEC0_PINMUX 0
+# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
# define MCFFEC_TOUT_LOOP 50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CONFIG_SYS_DISCOVER_PHY
# define FECDUPLEX FULL
# define FECSPEED _100BASET
# else
-# ifndef CFG_FAULT_ECHO_LINK_DOWN
-# define CFG_FAULT_ECHO_LINK_DOWN
+# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# endif
-# endif /* CFG_DISCOVER_PHY */
+# endif /* CONFIG_SYS_DISCOVER_PHY */
#endif
#define CONFIG_MCFRTC
@@ -100,10 +100,10 @@
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 80000
-#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_OFFSET 0x58000
-#define CFG_IMMR CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED 80000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x58000
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
#define CONFIG_UDP_CHECKSUM
@@ -120,7 +120,7 @@
#define CONFIG_HOSTNAME M5373EVB
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "loadaddr=" MK_STR(CFG_LOAD_ADDR) "\0" \
+ "loadaddr=" MK_STR(CONFIG_SYS_LOAD_ADDR) "\0" \
"u-boot=u-boot.bin\0" \
"load=tftp ${loadaddr) ${u-boot}\0" \
"upd=run load; run prog\0" \
@@ -131,27 +131,27 @@
""
#define CONFIG_PRAM 512 /* 512 KB */
-#define CFG_PROMPT "-> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "-> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
#ifdef CONFIG_CMD_KGDB
-# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x40010000
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR 0x40010000
-#define CFG_HZ 1000
-#define CFG_CLK 80000000
-#define CFG_CPU_CLK CFG_CLK * 3
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK 80000000
+#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
-#define CFG_MBAR 0xFC000000
+#define CONFIG_SYS_MBAR 0xFC000000
-#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)
+#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)
/*
* Low Level Configuration Settings
@@ -161,82 +161,82 @@
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x80000000
-#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL 0x221
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
+#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL 0x221
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x40000000
-#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */
-#define CFG_SDRAM_CFG1 0x53722730
-#define CFG_SDRAM_CFG2 0x56670000
-#define CFG_SDRAM_CTRL 0xE1092000
-#define CFG_SDRAM_EMOD 0x40010000
-#define CFG_SDRAM_MODE 0x018D0000
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1 0x53722730
+#define CONFIG_SYS_SDRAM_CFG2 0x56670000
+#define CONFIG_SYS_SDRAM_CTRL 0xE1092000
+#define CONFIG_SYS_SDRAM_EMOD 0x40010000
+#define CONFIG_SYS_SDRAM_MODE 0x018D0000
-#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
-#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_BOOTPARAMS_LEN 64*1024
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
# define CONFIG_FLASH_CFI_DRIVER 1
-# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */
-# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
-# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */
+# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
#endif
#ifdef NANDFLASH_SIZE
-# define CFG_MAX_NAND_DEVICE 1
-# define CFG_NAND_BASE CFG_CS2_BASE
-# define CFG_NAND_SIZE 1
-# define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
+# define CONFIG_SYS_MAX_NAND_DEVICE 1
+# define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE
+# define CONFIG_SYS_NAND_SIZE 1
+# define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
# define NAND_MAX_CHIPS 1
# define NAND_ALLOW_ERASE_ALL 1
# define CONFIG_JFFS2_NAND 1
# define CONFIG_JFFS2_DEV "nand0"
-# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1)
+# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1)
# define CONFIG_JFFS2_PART_OFFSET 0x00000000
#endif
-#define CFG_FLASH_BASE CFG_CS0_BASE
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
-#define CFG_ENV_OFFSET 0x4000
-#define CFG_ENV_SECT_SIZE 0x2000
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_IS_EMBEDDED 1
+#define CONFIG_ENV_OFFSET 0x4000
+#define CONFIG_ENV_SECT_SIZE 0x2000
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_EMBEDDED 1
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 16
+#define CONFIG_SYS_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Chipselect bank definitions
@@ -249,18 +249,18 @@
* CS4 - Available
* CS5 - Available
*/
-#define CFG_CS0_BASE 0
-#define CFG_CS0_MASK 0x007f0001
-#define CFG_CS0_CTRL 0x00001fa0
+#define CONFIG_SYS_CS0_BASE 0
+#define CONFIG_SYS_CS0_MASK 0x007f0001
+#define CONFIG_SYS_CS0_CTRL 0x00001fa0
-#define CFG_CS1_BASE 0x10000000
-#define CFG_CS1_MASK 0x001f0001
-#define CFG_CS1_CTRL 0x002A3780
+#define CONFIG_SYS_CS1_BASE 0x10000000
+#define CONFIG_SYS_CS1_MASK 0x001f0001
+#define CONFIG_SYS_CS1_CTRL 0x002A3780
#ifdef NANDFLASH_SIZE
-#define CFG_CS2_BASE 0x20000000
-#define CFG_CS2_MASK ((NANDFLASH_SIZE << 20) | 1)
-#define CFG_CS2_CTRL 0x00001f60
+#define CONFIG_SYS_CS2_BASE 0x20000000
+#define CONFIG_SYS_CS2_MASK ((NANDFLASH_SIZE << 20) | 1)
+#define CONFIG_SYS_CS2_CTRL 0x00001f60
#endif
#endif /* _M5373EVB_H */