summaryrefslogtreecommitdiff
path: root/include/configs/M5275EVB.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/M5275EVB.h')
-rw-r--r--include/configs/M5275EVB.h136
1 files changed, 68 insertions, 68 deletions
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 430af6b..db48d76 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -44,22 +44,22 @@
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
-#define CFG_UART_PORT (0)
+#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_OFFSET 0x4000
-#define CFG_ENV_SECT_SIZE 0x2000
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_IS_EMBEDDED 1
+#define CONFIG_ENV_OFFSET 0x4000
+#define CONFIG_ENV_SECT_SIZE 0x2000
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_EMBEDDED 1
#else
-#define CFG_ENV_ADDR 0xffe04000
-#define CFG_ENV_SECT_SIZE 0x2000
-#define CFG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR 0xffe04000
+#define CONFIG_ENV_SECT_SIZE 0x2000
+#define CONFIG_ENV_IS_IN_FLASH 1
#endif
/*
@@ -90,22 +90,22 @@
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1
#define CONFIG_MII_INIT 1
-#define CFG_DISCOVER_PHY
-#define CFG_RX_ETH_BUFFER 8
-#define CFG_FAULT_ECHO_LINK_DOWN
-#define CFG_FEC0_PINMUX 0
-#define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-#define CFG_FEC1_PINMUX 0
-#define CFG_FEC1_MIIBASE CFG_FEC1_IOBASE
+#define CONFIG_SYS_DISCOVER_PHY
+#define CONFIG_SYS_RX_ETH_BUFFER 8
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_SYS_FEC0_PINMUX 0
+#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
+#define CONFIG_SYS_FEC1_PINMUX 0
+#define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE
#define MCFFEC_TOUT_LOOP 50000
#define CONFIG_HAS_ETH1
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#ifndef CONFIG_SYS_DISCOVER_PHY
#define FECDUPLEX FULL
#define FECSPEED _100BASET
#else
-#ifndef CFG_FAULT_ECHO_LINK_DOWN
-#define CFG_FAULT_ECHO_LINK_DOWN
+#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#endif
#endif
#endif
@@ -114,40 +114,40 @@
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
#undef CONFIG_SOFT_I2C
-#define CFG_I2C_SPEED 80000
-#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_OFFSET 0x00000300
-#define CFG_IMMR CFG_MBAR
-#define CFG_I2C_PINMUX_REG (gpio_reg->par_feci2c)
-#define CFG_I2C_PINMUX_CLR (0xFFF0)
-#define CFG_I2C_PINMUX_SET (0x000F)
+#define CONFIG_SYS_I2C_SPEED 80000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x00000300
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+#define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c)
+#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0)
+#define CONFIG_SYS_I2C_PINMUX_SET (0x000F)
#ifdef CONFIG_MCFFEC
#define CONFIG_ETHADDR 00:06:3b:01:41:55
#define CONFIG_ETH1ADDR 00:0e:0c:bc:e5:60
#endif
-#define CFG_PROMPT "-> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "-> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if (CONFIG_CMD_KGDB)
-# define CFG_CBSIZE 1024
+# define CONFIG_SYS_CBSIZE 1024
#else
-# define CFG_CBSIZE 256
+# define CONFIG_SYS_CBSIZE 256
#endif
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS 16
-#define CFG_BARGSIZE CFG_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CFG_LOAD_ADDR 0x800000
+#define CONFIG_SYS_LOAD_ADDR 0x800000
#define CONFIG_BOOTDELAY 5
#define CONFIG_BOOTCOMMAND "bootm ffe40000"
-#define CFG_MEMTEST_START 0x400
-#define CFG_MEMTEST_END 0x380000
+#define CONFIG_SYS_MEMTEST_START 0x400
+#define CONFIG_SYS_MEMTEST_END 0x380000
-#define CFG_HZ 1000
-#define CFG_CLK 150000000
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK 150000000
/*
* Low Level Configuration Settings
@@ -155,73 +155,73 @@
* You should know what you are doing if you make changes here.
*/
-#define CFG_MBAR 0x40000000
+#define CONFIG_SYS_MBAR 0x40000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x20000000
-#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE 1000 /* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
+#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 1000 /* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
-#define CFG_FLASH_BASE 0xffe00000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE 0x20000
+#define CONFIG_SYS_MONITOR_BASE 0x20000
#else
-#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
-#define CFG_MONITOR_LEN 0x20000
-#define CFG_MALLOC_LEN (256 << 10)
-#define CFG_BOOTPARAMS_LEN 64*1024
+#define CONFIG_SYS_MONITOR_LEN 0x20000
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial mmap for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial mmap for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 1000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
-#define CFG_FLASH_CFI 1
+#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
-#define CFG_FLASH_SIZE 0x200000
+#define CONFIG_SYS_FLASH_SIZE 0x200000
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 16
+#define CONFIG_SYS_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
-#define CFG_AR0_PRELIM (CFG_FLASH_BASE >> 16)
-#define CFG_CR0_PRELIM 0x1980
-#define CFG_MR0_PRELIM 0x001F0001
+#define CONFIG_SYS_CS0_BASE 0xffe00000
+#define CONFIG_SYS_CS0_CTRL 0x00001980
+#define CONFIG_SYS_CS0_MASK 0x001F0001
-#define CFG_AR1_PRELIM 0x3000
-#define CFG_CR1_PRELIM 0x1900
-#define CFG_MR1_PRELIM 0x00070001
+#define CONFIG_SYS_CS1_BASE 0x30000000
+#define CONFIG_SYS_CS1_CTRL 0x00001900
+#define CONFIG_SYS_CS1_MASK 0x00070001
/*-----------------------------------------------------------------------
* Port configuration
*/
-#define CFG_FECI2C 0x0FA0
+#define CONFIG_SYS_FECI2C 0x0FA0
#endif /* _M5275EVB_H */