summaryrefslogtreecommitdiff
path: root/include/configs/M5253DEMO.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/M5253DEMO.h')
-rw-r--r--include/configs/M5253DEMO.h172
1 files changed, 86 insertions, 86 deletions
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 8d9bfa3..3a5c12f 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -31,9 +31,9 @@
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
-#define CFG_UART_PORT (0)
+#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG /* disable watchdog */
@@ -47,7 +47,7 @@
# define CONFIG_ENV_SECT_SIZE 0x1000
# define CONFIG_ENV_IS_IN_FLASH 1
#else
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000)
# define CONFIG_ENV_SECT_SIZE 0x1000
# define CONFIG_ENV_IS_IN_FLASH 1
#endif
@@ -75,22 +75,22 @@
# define CONFIG_ATAPI
# undef CONFIG_LBA48
-# define CFG_IDE_MAXBUS 1
-# define CFG_IDE_MAXDEVICE 2
+# define CONFIG_SYS_IDE_MAXBUS 1
+# define CONFIG_SYS_IDE_MAXDEVICE 2
-# define CFG_ATA_BASE_ADDR (CFG_MBAR2 + 0x800)
-# define CFG_ATA_IDE0_OFFSET 0
+# define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800)
+# define CONFIG_SYS_ATA_IDE0_OFFSET 0
-# define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
-# define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
-# define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
-# define CFG_ATA_STRIDE 4 /* Interval between registers */
+# define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
+# define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
+# define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
+# define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
# define _IO_BASE 0
#endif
#define CONFIG_DRIVER_DM9000
#ifdef CONFIG_DRIVER_DM9000
-# define CONFIG_DM9000_BASE ((CFG_CSAR1 << 16) | 0x300)
+# define CONFIG_DM9000_BASE ((CONFIG_SYS_CSAR1 << 16) | 0x300)
# define DM9000_IO CONFIG_DM9000_BASE
# define DM9000_DATA (CONFIG_DM9000_BASE + 4)
# undef CONFIG_DM9000_DEBUG
@@ -104,7 +104,7 @@
# define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
+ "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \
"loadaddr=10000\0" \
"u-boot=u-boot.bin\0" \
"load=tftp ${loadaddr) ${u-boot}\0" \
@@ -121,41 +121,41 @@
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
-#define CFG_I2C_SPEED 80000
-#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_OFFSET 0x00000280
-#define CFG_IMMR CFG_MBAR
-#define CFG_I2C_PINMUX_REG (*(u32 *) (CFG_MBAR+0x19C))
-#define CFG_I2C_PINMUX_CLR (0xFFFFE7FF)
-#define CFG_I2C_PINMUX_SET (0)
+#define CONFIG_SYS_I2C_SPEED 80000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x00000280
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+#define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C))
+#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF)
+#define CONFIG_SYS_I2C_PINMUX_SET (0)
-#define CFG_PROMPT "=> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
-# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x00100000
+#define CONFIG_SYS_LOAD_ADDR 0x00100000
-#define CFG_MEMTEST_START 0x400
-#define CFG_MEMTEST_END 0x380000
+#define CONFIG_SYS_MEMTEST_START 0x400
+#define CONFIG_SYS_MEMTEST_END 0x380000
-#define CFG_HZ 1000
+#define CONFIG_SYS_HZ 1000
-#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */
-#define CFG_FAST_CLK
-#ifdef CFG_FAST_CLK
-# define CFG_PLLCR 0x1243E054
-# define CFG_CLK 140000000
+#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
+#define CONFIG_SYS_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
+# define CONFIG_SYS_PLLCR 0x1243E054
+# define CONFIG_SYS_CLK 140000000
#else
-# define CFG_PLLCR 0x135a4140
-# define CFG_CLK 70000000
+# define CONFIG_SYS_PLLCR 0x135a4140
+# define CONFIG_SYS_CLK 70000000
#endif
/*
@@ -164,100 +164,100 @@
* You should know what you are doing if you make changes here.
*/
-#define CFG_MBAR 0x10000000 /* Register Base Addrs */
-#define CFG_MBAR2 0x80000000 /* Module Base Addrs 2 */
+#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */
+#define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */
/*
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x20000000
-#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
+#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
#ifdef CONFIG_MONITOR_IS_IN_RAM
-# define CFG_MONITOR_BASE 0x20000
+# define CONFIG_SYS_MONITOR_BASE 0x20000
#else
-# define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
-#define CFG_MONITOR_LEN 0x40000
-#define CFG_MALLOC_LEN (256 << 10)
-#define CFG_BOOTPARAMS_LEN (64*1024)
+#define CONFIG_SYS_MONITOR_LEN 0x40000
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
/* FLASH organization */
-#define CFG_FLASH_BASE (CFG_CSAR0 << 16)
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 1000
+#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CSAR0 << 16)
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
#define FLASH_SST6401B 0x200
#define SST_ID_xF6401B 0x236D236D
-#undef CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#undef CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
/*
* Unable to use CFI driver, due to incompatible sector erase command by SST.
* Amd/Atmel use 0x30 for sector erase, SST use 0x50.
* 0x30 is block erase in SST
*/
# define CONFIG_FLASH_CFI_DRIVER 1
-# define CFG_FLASH_SIZE 0x800000
-# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CONFIG_SYS_FLASH_SIZE 0x800000
+# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
# define CONFIG_FLASH_CFI_LEGACY
#else
-# define CFG_SST_SECT 2048
-# define CFG_SST_SECTSZ 0x1000
-# define CFG_FLASH_WRITE_TOUT 500
+# define CONFIG_SYS_SST_SECT 2048
+# define CONFIG_SYS_SST_SECTSZ 0x1000
+# define CONFIG_SYS_FLASH_WRITE_TOUT 500
#endif
/* Cache Configuration */
-#define CFG_CACHELINE_SIZE 16
+#define CONFIG_SYS_CACHELINE_SIZE 16
/* Port configuration */
-#define CFG_FECI2C 0xF0
+#define CONFIG_SYS_FECI2C 0xF0
-#define CFG_CSAR0 0xFF80
-#define CFG_CSMR0 0x007F0021
-#define CFG_CSCR0 0x1D80
+#define CONFIG_SYS_CSAR0 0xFF80
+#define CONFIG_SYS_CSMR0 0x007F0021
+#define CONFIG_SYS_CSCR0 0x1D80
-#define CFG_CSAR1 0xE000
-#define CFG_CSMR1 0x00000001
-#define CFG_CSCR1 0x3DD8
+#define CONFIG_SYS_CSAR1 0xE000
+#define CONFIG_SYS_CSMR1 0x00000001
+#define CONFIG_SYS_CSCR1 0x3DD8
-#define CFG_CSAR2 0
-#define CFG_CSMR2 0
-#define CFG_CSCR2 0
+#define CONFIG_SYS_CSAR2 0
+#define CONFIG_SYS_CSMR2 0
+#define CONFIG_SYS_CSCR2 0
-#define CFG_CSAR3 0
-#define CFG_CSMR3 0
-#define CFG_CSCR3 0
+#define CONFIG_SYS_CSAR3 0
+#define CONFIG_SYS_CSMR3 0
+#define CONFIG_SYS_CSCR3 0
/*-----------------------------------------------------------------------
* Port configuration
*/
-#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
-#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */
-#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */
-#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */
-#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */
-#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
-#define CFG_GPIO1_LED 0x00400000 /* user led */
+#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
+#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */
+#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */
+#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */
+#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */
#endif /* _M5253DEMO_H */