summaryrefslogtreecommitdiff
path: root/include/configs/ERIC.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/ERIC.h')
-rw-r--r--include/configs/ERIC.h369
1 files changed, 0 insertions, 369 deletions
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
deleted file mode 100644
index 8a0f850..0000000
--- a/include/configs/ERIC.h
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405GP 1 /* This is a PPC405 CPU */
-#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_ERIC 1 /* ...on a ERIC board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* run board_early_init_f() */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
-#if 1
-#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#endif
-#if 0
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#endif
-#if 0
-#define CONFIG_ENV_IS_IN_EEPROM 1 /* use I2C RTC X1240 for environment vars */
-#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
-#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars */
-#endif /* total size of a X1240 is 2048 bytes */
-
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* X1240 has two I2C slave addresses, one for EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* address length for the eeprom */
-#define CONFIG_I2C_RTC 1 /* we have a Xicor X1240 RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x6F /* and one for RTC */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#else
-#ifdef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#else
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-#endif
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-
-#if 1
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#else
-#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
-#endif
-
-#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/nfs " \
- "nfsroot=192.168.1.2:/eric_root_devel " \
- "ip=192.168.1.22:192.168.1.2"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 1 /* PHY address */
-#define CONFIG_NET_MULTI
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-
-#define CONFIG_SYS_EXT_SERIAL_CLOCK 14318180
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
- 57600, 115200, 230400, 460800, 921600 }
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#undef CONFIG_PCI_PNP /* no pci plug-and-play */
- /* resource configuration */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1743 /* PCI Vendor ID: Peppercon AG */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: 405GP */
-#define CONFIG_SYS_PCI_PTM1LA 0xFFFC0000 /* point to flash */
-#define CONFIG_SYS_PCI_PTM1MS 0xFFFFF001 /* 4kB, enable hard-wired to 1 */
-#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
-#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
-
-/*-----------------------------------------------------------------------
- * External peripheral base address
- *-----------------------------------------------------------------------
- */
-/* Bank 0 - Flash/SRAM 0xFF000000 16MB 16 Bit */
-/* Bank 1 - NVRAM/RTC 0xF0000000 1MB 8 Bit */
-/* Bank 2 - A/D converter 0xF0100000 1MB 8 Bit */
-/* Bank 3 - Ethernet PHY Reset 0xF0200000 1MB 8 Bit */
-/* Bank 4 - PC-MIP PRSNT1# 0xF0300000 1MB 8 Bit */
-/* Bank 5 - PC-MIP PRSNT2# 0xF0400000 1MB 8 Bit */
-/* Bank 6 - CPU LED0 0xF0500000 1MB 8 Bit */
-/* Bank 7 - CPU LED1 0xF0600000 1MB 8 Bit */
-
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 0 (Flash) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS0_AP 0x9B015480
-#define CS0_CR 0xFF87A000 /* BAS=0xFF8,BS=(8MB),BU=0x3(R/W), BW=(16 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 1 (NVRAM/RTC) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS1_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS1_CR 0xF0018000 /* BAS=0xF00,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
- /* ----------------------------------------------------------------------- */
- /* Memory Bank 2 (A/D converter) initialization */
- /* ----------------------------------------------------------------------- */
-#define CS2_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS2_CR 0xF0118000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 3 (Ethernet PHY Reset) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS3_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS3_CR 0xF0218000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS4_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS4_CR 0xF0318000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS5_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS5_CR 0xF0418000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 6 (CPU LED0) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS6_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS6_CR 0xF0518000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 7 (CPU LED1) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS7_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS7_CR 0xF0618000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-
-#define CONFIG_SYS_NVRAM_REG_BASE_ADDR 0xF0000000
-#define CONFIG_SYS_RTC_REG_BASE_ADDR (0xF0000000 + 0x7F8)
-#define CONFIG_SYS_ADC_REG_BASE_ADDR 0xF0100000
-#define CONFIG_SYS_PHYRES_REG_BASE_ADDR 0xF0200000
-#define CONFIG_SYS_PRSNT1_REG_BASE_ADDR 0xF0300000
-#define CONFIG_SYS_PRSNT2_REG_BASE_ADDR 0xF0400000
-#define CONFIG_SYS_LED0_REG_BASE_ADDR 0xF0500000
-#define CONFIG_SYS_LED1_REG_BASE_ADDR 0xF0600000
-
-
-/* SDRAM CONFIG */
-#define CONFIG_SYS_SDRAM_MANUALLY 1
-#define CONFIG_SYS_SDRAM_SINGLE_BANK 1
-
-#ifdef CONFIG_SYS_SDRAM_MANUALLY
-/*-----------------------------------------------------------------------
- * Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2)
- *----------------------------------------------------------------------*/
-#define MB0CF 0x00062001 /* 32MB @ 0 */
-/*-----------------------------------------------------------------------
- * Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2)
- *----------------------------------------------------------------------*/
-#ifdef CONFIG_SYS_SDRAM_SINGLE_BANK
-#define MB1CF 0x0 /* 0MB @ 32MB */
-#else
-#define MB1CF 0x02062001 /* 32MB @ 32MB */
-#endif
-/*-----------------------------------------------------------------------
- * Set MB2CF for bank 2. off
- *----------------------------------------------------------------------*/
-#define MB2CF 0x0 /* 0MB */
-/*-----------------------------------------------------------------------
- * Set MB3CF for bank 3. off
- *----------------------------------------------------------------------*/
-#define MB3CF 0x0 /* 0MB */
-
-#define SDTR_100 0x0086400D
-#define RTR_100 0x05F0
-#define SDTR_66 0x00854006 /* orig U-Boot-wallnut says 0x00854006 */
-#define RTR_66 0x03f8
-
-#endif /* CONFIG_SYS_SDRAM_MANUALLY */
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 32
-#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* 8 MByte Flash */
-#define CONFIG_SYS_MONITOR_BASE 0xFFFE0000 /* last 128kByte within Flash */
-/*#define CONFIG_SYS_MONITOR_LEN (192 * 1024)*/ /* Reserve 196 kB for Monitor */
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* Reserve 128 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_16BIT 1 /* Rom 16 bit data bus */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/* BEG ENVIRONNEMENT FLASH */
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE (128*1024)
-
-#if 0 /* force ENV to be NOT embedded */
-#define CONFIG_ENV_ADDR 0xfffa0000
-#else /* force ENV to be embedded */
-#define CONFIG_ENV_SIZE (2 * 1024) /* Total Size of Environment Sector 2k */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SIZE - 0x10) /* let space for reset vector */
-/* #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE)*/
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#endif
-
-#endif
-/* END ENVIRONNEMENT FLASH */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CONFIG_SYS_NVRAM_BASE_ADDR CONFIG_SYS_NVRAM_REG_BASE_ADDR /* NVRAM base address */
-#define CONFIG_SYS_NVRAM_SIZE 0x7F8 /* NVRAM size 2kByte - 8 Byte for RTC */
-
-#ifdef CONFIG_ENV_IS_IN_NVRAM
-#define CONFIG_ENV_SIZE 0x7F8 /* Size of Environment vars */
-#define CONFIG_ENV_ADDR \
- (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
-#endif
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 8MB */
-#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
-
-
-/* Configuration Port location */
-/* #define CONFIG_PORT_ADDR 0xF0000500 */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Definitions for Serial Presence Detect EEPROM address
- * (to get SDRAM settings)
- */
-#define SPD_EEPROM_ADDRESS 0x50
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-#endif /* __CONFIG_H */