summaryrefslogtreecommitdiff
path: root/include/configs/ERIC.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/ERIC.h')
-rw-r--r--include/configs/ERIC.h132
1 files changed, 66 insertions, 66 deletions
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index c3c7aa4..c05945a 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -54,13 +54,13 @@
#endif /* total size of a X1240 is 2048 bytes */
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CFG_I2C_EEPROM_ADDR 0x57 /* X1240 has two I2C slave addresses, one for EEPROM */
-#define CFG_I2C_EEPROM_ADDR_LEN 2 /* address length for the eeprom */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* X1240 has two I2C slave addresses, one for EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* address length for the eeprom */
#define CONFIG_I2C_RTC 1 /* we have a Xicor X1240 RTC */
-#define CFG_I2C_RTC_ADDR 0x6F /* and one for RTC */
+#define CONFIG_SYS_I2C_RTC_ADDR 0x6F /* and one for RTC */
#ifdef CONFIG_ENV_IS_IN_FLASH
#undef CONFIG_ENV_IS_IN_NVRAM
@@ -91,7 +91,7 @@
"ip=192.168.1.22:192.168.1.2"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
@@ -122,31 +122,31 @@
/*
* Miscellaneous configurable options
*/
-#undef CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#undef CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-#define CFG_EXT_SERIAL_CLOCK 14318180
+#define CONFIG_SYS_EXT_SERIAL_CLOCK 14318180
/* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
57600, 115200, 230400, 460800, 921600 }
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* PCI stuff
@@ -161,14 +161,14 @@
#undef CONFIG_PCI_PNP /* no pci plug-and-play */
/* resource configuration */
-#define CFG_PCI_SUBSYS_VENDORID 0x1743 /* PCI Vendor ID: Peppercon AG */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: 405GP */
-#define CFG_PCI_PTM1LA 0xFFFC0000 /* point to flash */
-#define CFG_PCI_PTM1MS 0xFFFFF001 /* 4kB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1743 /* PCI Vendor ID: Peppercon AG */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: 405GP */
+#define CONFIG_SYS_PCI_PTM1LA 0xFFFC0000 /* point to flash */
+#define CONFIG_SYS_PCI_PTM1MS 0xFFFFF001 /* 4kB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
+#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
/*-----------------------------------------------------------------------
* External peripheral base address
@@ -224,21 +224,21 @@
#define CS7_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
#define CS7_CR 0xF0618000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-#define CFG_NVRAM_REG_BASE_ADDR 0xF0000000
-#define CFG_RTC_REG_BASE_ADDR (0xF0000000 + 0x7F8)
-#define CFG_ADC_REG_BASE_ADDR 0xF0100000
-#define CFG_PHYRES_REG_BASE_ADDR 0xF0200000
-#define CFG_PRSNT1_REG_BASE_ADDR 0xF0300000
-#define CFG_PRSNT2_REG_BASE_ADDR 0xF0400000
-#define CFG_LED0_REG_BASE_ADDR 0xF0500000
-#define CFG_LED1_REG_BASE_ADDR 0xF0600000
+#define CONFIG_SYS_NVRAM_REG_BASE_ADDR 0xF0000000
+#define CONFIG_SYS_RTC_REG_BASE_ADDR (0xF0000000 + 0x7F8)
+#define CONFIG_SYS_ADC_REG_BASE_ADDR 0xF0100000
+#define CONFIG_SYS_PHYRES_REG_BASE_ADDR 0xF0200000
+#define CONFIG_SYS_PRSNT1_REG_BASE_ADDR 0xF0300000
+#define CONFIG_SYS_PRSNT2_REG_BASE_ADDR 0xF0400000
+#define CONFIG_SYS_LED0_REG_BASE_ADDR 0xF0500000
+#define CONFIG_SYS_LED1_REG_BASE_ADDR 0xF0600000
/* SDRAM CONFIG */
-#define CFG_SDRAM_MANUALLY 1
-#define CFG_SDRAM_SINGLE_BANK 1
+#define CONFIG_SYS_SDRAM_MANUALLY 1
+#define CONFIG_SYS_SDRAM_SINGLE_BANK 1
-#ifdef CFG_SDRAM_MANUALLY
+#ifdef CONFIG_SYS_SDRAM_MANUALLY
/*-----------------------------------------------------------------------
* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2)
*----------------------------------------------------------------------*/
@@ -246,7 +246,7 @@
/*-----------------------------------------------------------------------
* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2)
*----------------------------------------------------------------------*/
-#ifdef CFG_SDRAM_SINGLE_BANK
+#ifdef CONFIG_SYS_SDRAM_SINGLE_BANK
#define MB1CF 0x0 /* 0MB @ 32MB */
#else
#define MB1CF 0x02062001 /* 32MB @ 32MB */
@@ -265,37 +265,37 @@
#define SDTR_66 0x00854006 /* orig U-Boot-wallnut says 0x00854006 */
#define RTR_66 0x03f8
-#endif /* CFG_SDRAM_MANUALLY */
+#endif /* CONFIG_SYS_SDRAM_MANUALLY */
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 32
-#define CFG_FLASH_BASE 0xFF800000 /* 8 MByte Flash */
-#define CFG_MONITOR_BASE 0xFFFE0000 /* last 128kByte within Flash */
-/*#define CFG_MONITOR_LEN (192 * 1024)*/ /* Reserve 196 kB for Monitor */
-#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128 kB for Monitor */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 32
+#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* 8 MByte Flash */
+#define CONFIG_SYS_MONITOR_BASE 0xFFFE0000 /* last 128kByte within Flash */
+/*#define CONFIG_SYS_MONITOR_LEN (192 * 1024)*/ /* Reserve 196 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* Reserve 128 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CFG_FLASH_16BIT 1 /* Rom 16 bit data bus */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_16BIT 1 /* Rom 16 bit data bus */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
/* BEG ENVIRONNEMENT FLASH */
#ifdef CONFIG_ENV_IS_IN_FLASH
@@ -305,9 +305,9 @@
#define CONFIG_ENV_ADDR 0xfffa0000
#else /* force ENV to be embedded */
#define CONFIG_ENV_SIZE (2 * 1024) /* Total Size of Environment Sector 2k */
-#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN - CONFIG_ENV_SIZE - 0x10) /* let space for reset vector */
-/* #define CONFIG_ENV_ADDR (CFG_MONITOR_BASE)*/
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CFG_FLASH_BASE)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SIZE - 0x10) /* let space for reset vector */
+/* #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE)*/
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
#endif
#endif
@@ -315,13 +315,13 @@
/*-----------------------------------------------------------------------
* NVRAM organization
*/
-#define CFG_NVRAM_BASE_ADDR CFG_NVRAM_REG_BASE_ADDR /* NVRAM base address */
-#define CFG_NVRAM_SIZE 0x7F8 /* NVRAM size 2kByte - 8 Byte for RTC */
+#define CONFIG_SYS_NVRAM_BASE_ADDR CONFIG_SYS_NVRAM_REG_BASE_ADDR /* NVRAM base address */
+#define CONFIG_SYS_NVRAM_SIZE 0x7F8 /* NVRAM size 2kByte - 8 Byte for RTC */
#ifdef CONFIG_ENV_IS_IN_NVRAM
#define CONFIG_ENV_SIZE 0x7F8 /* Size of Environment vars */
#define CONFIG_ENV_ADDR \
- (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
+ (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
#endif
/*
@@ -340,11 +340,11 @@
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
-#define CFG_INIT_RAM_END 0x0f00 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_END 0x0f00 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Definitions for Serial Presence Detect EEPROM address