diff options
Diffstat (limited to 'include/configs/ERIC.h')
| -rw-r--r-- | include/configs/ERIC.h | 175 |
1 files changed, 88 insertions, 87 deletions
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index bfdcf6a..1b766a7 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -42,37 +42,37 @@ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ #if 1 -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #endif #if 0 -#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ +#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ #endif #if 0 -#define CFG_ENV_IS_IN_EEPROM 1 /* use I2C RTC X1240 for environment vars */ -#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ -#define CFG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars */ +#define CONFIG_ENV_IS_IN_EEPROM 1 /* use I2C RTC X1240 for environment vars */ +#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ +#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars */ #endif /* total size of a X1240 is 2048 bytes */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CFG_I2C_EEPROM_ADDR 0x57 /* X1240 has two I2C slave addresses, one for EEPROM */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* address length for the eeprom */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* X1240 has two I2C slave addresses, one for EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* address length for the eeprom */ #define CONFIG_I2C_RTC 1 /* we have a Xicor X1240 RTC */ -#define CFG_I2C_RTC_ADDR 0x6F /* and one for RTC */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x6F /* and one for RTC */ -#ifdef CFG_ENV_IS_IN_FLASH -#undef CFG_ENV_IS_IN_NVRAM -#undef CFG_ENV_IS_IN_EEPROM +#ifdef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_NVRAM +#undef CONFIG_ENV_IS_IN_EEPROM #else -#ifdef CFG_ENV_IS_IN_NVRAM -#undef CFG_ENV_IS_IN_FLASH -#undef CFG_ENV_IS_IN_EEPROM +#ifdef CONFIG_ENV_IS_IN_NVRAM +#undef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_EEPROM #else -#ifdef CFG_ENV_IS_IN_EEPROM -#undef CFG_ENV_IS_IN_NVRAM -#undef CFG_ENV_IS_IN_FLASH +#ifdef CONFIG_ENV_IS_IN_EEPROM +#undef CONFIG_ENV_IS_IN_NVRAM +#undef CONFIG_ENV_IS_IN_FLASH #endif #endif #endif @@ -91,8 +91,9 @@ "ip=192.168.1.22:192.168.1.2" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ @@ -122,31 +123,31 @@ /* * Miscellaneous configurable options */ -#undef CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#undef CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_EXT_SERIAL_CLOCK 14318180 +#define CONFIG_SYS_EXT_SERIAL_CLOCK 14318180 /* The following table includes the supported baudrates */ -#define CFG_BAUDRATE_TABLE \ +#define CONFIG_SYS_BAUDRATE_TABLE \ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ 57600, 115200, 230400, 460800, 921600 } -#define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff @@ -161,14 +162,14 @@ #undef CONFIG_PCI_PNP /* no pci plug-and-play */ /* resource configuration */ -#define CFG_PCI_SUBSYS_VENDORID 0x1743 /* PCI Vendor ID: Peppercon AG */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: 405GP */ -#define CFG_PCI_PTM1LA 0xFFFC0000 /* point to flash */ -#define CFG_PCI_PTM1MS 0xFFFFF001 /* 4kB, enable hard-wired to 1 */ -#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ -#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ -#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1743 /* PCI Vendor ID: Peppercon AG */ +#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: 405GP */ +#define CONFIG_SYS_PCI_PTM1LA 0xFFFC0000 /* point to flash */ +#define CONFIG_SYS_PCI_PTM1MS 0xFFFFF001 /* 4kB, enable hard-wired to 1 */ +#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */ +#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */ +#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ /*----------------------------------------------------------------------- * External peripheral base address @@ -224,21 +225,21 @@ #define CS7_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */ #define CS7_CR 0xF0618000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */ -#define CFG_NVRAM_REG_BASE_ADDR 0xF0000000 -#define CFG_RTC_REG_BASE_ADDR (0xF0000000 + 0x7F8) -#define CFG_ADC_REG_BASE_ADDR 0xF0100000 -#define CFG_PHYRES_REG_BASE_ADDR 0xF0200000 -#define CFG_PRSNT1_REG_BASE_ADDR 0xF0300000 -#define CFG_PRSNT2_REG_BASE_ADDR 0xF0400000 -#define CFG_LED0_REG_BASE_ADDR 0xF0500000 -#define CFG_LED1_REG_BASE_ADDR 0xF0600000 +#define CONFIG_SYS_NVRAM_REG_BASE_ADDR 0xF0000000 +#define CONFIG_SYS_RTC_REG_BASE_ADDR (0xF0000000 + 0x7F8) +#define CONFIG_SYS_ADC_REG_BASE_ADDR 0xF0100000 +#define CONFIG_SYS_PHYRES_REG_BASE_ADDR 0xF0200000 +#define CONFIG_SYS_PRSNT1_REG_BASE_ADDR 0xF0300000 +#define CONFIG_SYS_PRSNT2_REG_BASE_ADDR 0xF0400000 +#define CONFIG_SYS_LED0_REG_BASE_ADDR 0xF0500000 +#define CONFIG_SYS_LED1_REG_BASE_ADDR 0xF0600000 /* SDRAM CONFIG */ -#define CFG_SDRAM_MANUALLY 1 -#define CFG_SDRAM_SINGLE_BANK 1 +#define CONFIG_SYS_SDRAM_MANUALLY 1 +#define CONFIG_SYS_SDRAM_SINGLE_BANK 1 -#ifdef CFG_SDRAM_MANUALLY +#ifdef CONFIG_SYS_SDRAM_MANUALLY /*----------------------------------------------------------------------- * Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) *----------------------------------------------------------------------*/ @@ -246,7 +247,7 @@ /*----------------------------------------------------------------------- * Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) *----------------------------------------------------------------------*/ -#ifdef CFG_SDRAM_SINGLE_BANK +#ifdef CONFIG_SYS_SDRAM_SINGLE_BANK #define MB1CF 0x0 /* 0MB @ 32MB */ #else #define MB1CF 0x02062001 /* 32MB @ 32MB */ @@ -265,49 +266,49 @@ #define SDTR_66 0x00854006 /* orig U-Boot-wallnut says 0x00854006 */ #define RTR_66 0x03f8 -#endif /* CFG_SDRAM_MANUALLY */ +#endif /* CONFIG_SYS_SDRAM_MANUALLY */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 32 -#define CFG_FLASH_BASE 0xFF800000 /* 8 MByte Flash */ -#define CFG_MONITOR_BASE 0xFFFE0000 /* last 128kByte within Flash */ -/*#define CFG_MONITOR_LEN (192 * 1024)*/ /* Reserve 196 kB for Monitor */ -#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128 kB for Monitor */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE 32 +#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* 8 MByte Flash */ +#define CONFIG_SYS_MONITOR_BASE 0xFFFE0000 /* last 128kByte within Flash */ +/*#define CONFIG_SYS_MONITOR_LEN (192 * 1024)*/ /* Reserve 196 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* Reserve 128 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CFG_FLASH_16BIT 1 /* Rom 16 bit data bus */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_16BIT 1 /* Rom 16 bit data bus */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ /* BEG ENVIRONNEMENT FLASH */ -#ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE (128*1024) +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE (128*1024) #if 0 /* force ENV to be NOT embedded */ -#define CFG_ENV_ADDR 0xfffa0000 +#define CONFIG_ENV_ADDR 0xfffa0000 #else /* force ENV to be embedded */ -#define CFG_ENV_SIZE (2 * 1024) /* Total Size of Environment Sector 2k */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN - CFG_ENV_SIZE - 0x10) /* let space for reset vector */ -/* #define CFG_ENV_ADDR (CFG_MONITOR_BASE)*/ -#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CONFIG_ENV_SIZE (2 * 1024) /* Total Size of Environment Sector 2k */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SIZE - 0x10) /* let space for reset vector */ +/* #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE)*/ +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) #endif #endif @@ -315,13 +316,13 @@ /*----------------------------------------------------------------------- * NVRAM organization */ -#define CFG_NVRAM_BASE_ADDR CFG_NVRAM_REG_BASE_ADDR /* NVRAM base address */ -#define CFG_NVRAM_SIZE 0x7F8 /* NVRAM size 2kByte - 8 Byte for RTC */ +#define CONFIG_SYS_NVRAM_BASE_ADDR CONFIG_SYS_NVRAM_REG_BASE_ADDR /* NVRAM base address */ +#define CONFIG_SYS_NVRAM_SIZE 0x7F8 /* NVRAM size 2kByte - 8 Byte for RTC */ -#ifdef CFG_ENV_IS_IN_NVRAM -#define CFG_ENV_SIZE 0x7F8 /* Size of Environment vars */ -#define CFG_ENV_ADDR \ - (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */ +#ifdef CONFIG_ENV_IS_IN_NVRAM +#define CONFIG_ENV_SIZE 0x7F8 /* Size of Environment vars */ +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */ #endif /* @@ -340,11 +341,11 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ -#define CFG_INIT_RAM_END 0x0f00 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ +#define CONFIG_SYS_INIT_RAM_END 0x0f00 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Definitions for Serial Presence Detect EEPROM address |