diff options
Diffstat (limited to 'include/configs/ELPT860.h')
-rw-r--r-- | include/configs/ELPT860.h | 390 |
1 files changed, 390 insertions, 0 deletions
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h new file mode 100644 index 0000000..e9561b9 --- /dev/null +++ b/include/configs/ELPT860.h @@ -0,0 +1,390 @@ +/* +**===================================================================== +** +** Copyright (C) 2000, 2001, 2002, 2003 +** The LEOX team <team@leox.org>, http://www.leox.org +** +** LEOX.org is about the development of free hardware and software resources +** for system on chip. +** +** Description: U-Boot port on the LEOX's ELPT860 CPU board +** ~~~~~~~~~~~ +** +**===================================================================== +** +** This program is free software; you can redistribute it and/or +** modify it under the terms of the GNU General Public License as +** published by the Free Software Foundation; either version 2 of +** the License, or (at your option) any later version. +** +** This program is distributed in the hope that it will be useful, +** but WITHOUT ANY WARRANTY; without even the implied warranty of +** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +** GNU General Public License for more details. +** +** You should have received a copy of the GNU General Public License +** along with this program; if not, write to the Free Software +** Foundation, Inc., 59 Temple Place, Suite 330, Boston, +** MA 02111-1307 USA +** +**===================================================================== +*/ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC860 1 /* It's a MPC860, in fact a 860T CPU */ +#define CONFIG_MPC860T 1 +#define CONFIG_ELPT860 1 /* ...on a LEOX's ELPT860 CPU board */ + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE + +#define CONFIG_CLOCKS_IN_MHZ 1 /* Clock passed to Linux (<2.4.5) in MHz */ +#define CONFIG_8xx_GCLK_FREQ 50000000 /* MPC860T runs at 50MHz */ + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ + +/* BOOT arguments */ +#define CONFIG_PREBOOT \ + "echo;" \ + "echo Type \"run nfsboot\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "rootargs=setenv rootpath /tftp/$(ipaddr)\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off panic=1\0" \ + "ramboot=tftp 400000 /home/paugaml/pMulti;" \ + "run ramargs;bootm\0" \ + "nfsboot=tftp 400000 /home/paugaml/uImage;" \ + "run rootargs;run nfsargs;run addip;bootm\0" \ + "" +#define CONFIG_BOOTCOMMAND "run ramboot" + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ +#undef CONFIG_RTC_MPC8xx /* internal RTC MPC8xx unused */ +#define CONFIG_RTC_DS164x 1 /* RTC is a Dallas DS1646 */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "LEOX_elpt860: " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x00100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Environment Variables and Storages + */ +#define CONFIG_ENV_OVERWRITE 1 /* Allow Overwrite of serial# & ethaddr */ + +#undef CFG_ENV_IS_IN_NVRAM /* Environment is in NVRAM */ +#undef CFG_ENV_IS_IN_EEPROM /* Environment is in I2C EEPROM */ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment is in FLASH */ + +#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_ETHADDR 00:01:77:00:60:40 +#define CONFIG_IPADDR 192.168.0.30 +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_SERVERIP 192.168.0.1 +#define CONFIG_GATEWAYIP 192.168.0.1 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFF000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x02000000 +#define CFG_NVRAM_BASE 0x03000000 + +#if defined(CFG_ENV_IS_IN_FLASH) +# if defined(DEBUG) +# define CFG_MONITOR_LEN (320 << 10) /* Reserve 320 kB for Monitor */ +# else +# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +# endif +#else +# if defined(DEBUG) +# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +# else +# define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +# endif +#endif + +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#if defined(CFG_ENV_IS_IN_FLASH) +# define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ +# define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#endif + +/*----------------------------------------------------------------------- + * NVRAM organization + */ +#define CFG_NVRAM_BASE_ADDR CFG_NVRAM_BASE /* Base address of NVRAM area */ +#define CFG_NVRAM_SIZE ((128*1024)-8) /* clock regs resident in the */ + /* 8 top NVRAM locations */ + +#if defined(CFG_ENV_IS_IN_NVRAM) +# define CFG_ENV_ADDR CFG_NVRAM_BASE /* Base address of NVRAM area */ +# define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP) +#else +# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CFG_SIUMCR (SIUMCR_DBGC11) + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + * Once-per-Second Interrupt, Alarm Interrupt, RTC freezing enabled, RTC + * enabled + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit - leave PLL multiplication factor unchanged ! + */ +#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR (SCCR_TBS | \ + SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) + +/*----------------------------------------------------------------------- + * Chip Selects + SDRAM timings + Memory Periodic Timer Prescaler + *----------------------------------------------------------------------- + * + */ +#ifdef DEBUG +# define CFG_DER 0xFFE7400F /* Debug Enable Register */ +#else +# define CFG_DER 0 +#endif + +/* + * Init Memory Controller: + * ~~~~~~~~~~~~~~~~~~~~~~ + * + * BR0 and OR0 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_PRELIM_OR_AM 0xFF000000 /* 16 MB between each CSx */ + +/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 0, SCY = 8, EHTR = 0 */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK) + +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) + +/* + * BR1 and OR1 (SDRAM) + * + */ +#define SDRAM_BASE1_PRELIM CFG_SDRAM_BASE /* SDRAM bank #0 */ +#define SDRAM_MAX_SIZE 0x02000000 /* 32 MB MAX for CS1 */ + +/* SDRAM timing: */ +#define CFG_OR_TIMING_SDRAM 0x00000000 + +#define CFG_OR1_PRELIM ((2 * CFG_PRELIM_OR_AM) | CFG_OR_TIMING_SDRAM ) +#define CFG_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +/* + * BR2 and OR2 (NVRAM) + * + */ +#define NVRAM_BASE1_PRELIM CFG_NVRAM_BASE /* NVRAM bank #0 */ +#define NVRAM_MAX_SIZE 0x00020000 /* 128 KB MAX for CS2 */ + +#define CFG_OR2_PRELIM 0xFFF80160 +#define CFG_BR2_PRELIM ((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) + +/* + * Memory Periodic Timer Prescaler + */ + +/* periodic timer for refresh */ +#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */ + +/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +/*----------------------------------------------------------------------- + * Internal Definitions + *----------------------------------------------------------------------- + * + */ + +/* + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + + +#endif /* __CONFIG_H */ |