diff options
Diffstat (limited to 'include/configs/EB+MCF-EV123.h')
| -rw-r--r-- | include/configs/EB+MCF-EV123.h | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h new file mode 100644 index 0000000..720b335 --- /dev/null +++ b/include/configs/EB+MCF-EV123.h @@ -0,0 +1,223 @@ +/* + * Configuation settings for the BuS EB+MCF-EV123 boards. + * + * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CONFIG_EB_MCF_EV123_H_ +#define _CONFIG_EB_MCF_EV123_H_ + +#define CONFIG_EB_MCF_EV123 + +#undef DEBUG +#undef CFG_HALT_BEFOR_RAM_JUMP +#undef ET_DEBUG + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5282 /* define processor type */ + +#define CONFIG_MISC_INIT_R + +#define FEC_ENET +#define CONFIG_ETHADDR 00:CF:52:82:EB:01 + +#define CONFIG_BAUDRATE 9600 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ + +#define CONFIG_BOOTCOMMAND "printenv" + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_ADDR 0xF003C000 /* End of 256K */ +#define CFG_ENV_SECT_SIZE 0x4000 +#define CFG_ENV_IS_IN_FLASH 1 +/* +#define CFG_ENV_IS_EMBEDDED 1 +#define CFG_ENV_ADDR_REDUND 0xF0018000 +#define CFG_ENV_SECT_SIZE_REDUND 0x4000 +*/ +#else +#define CFG_ENV_ADDR 0xFFE04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/*#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */ +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 5 +#define CFG_PROMPT "\nEV123 U-Boot> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x20000 + +#define CFG_MEMTEST_START 0x100000 +#define CFG_MEMTEST_END 0x400000 +/*#define CFG_DRAM_TEST 1 */ +#undef CFG_DRAM_TEST + +/* Clock and PLL Configuration */ +#define CFG_HZ 10000000 +#define CFG_CLK 58982400 /* 9,8304MHz * 6 */ + +/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ + +#define CFG_MFD 0x01 /* PLL Multiplication Factor Devider */ +#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +#define CFG_MBAR 0x40000000 + +#define CFG_DISCOVER_PHY +/* #define CFG_ENET_BD_BASE 0x380000 */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE1 0x00000000 +#define CFG_SDRAM_SIZE1 16 /* SDRAM size in MB */ + +/* +#define CFG_SDRAM_BASE0 CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024 +#define CFG_SDRAM_SIZE0 16 */ /* SDRAM size in MB */ + +#define CFG_SDRAM_BASE CFG_SDRAM_BASE1 +#define CFG_SDRAM_SIZE CFG_SDRAM_SIZE1 + +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_INT_FLASH_BASE 0xF0000000 + +/* If M5282 port is fully implemented the monitor base will be behind + * the vector table. */ +#if (TEXT_BASE != CFG_INT_FLASH_BASE) +#define CFG_MONITOR_BASE (TEXT_BASE + 0x400) +#else +#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ +#endif + +#define CFG_MONITOR_LEN 0x20000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_SECT 35 +#define CFG_MAX_FLASH_BANKS 2 +#define CFG_FLASH_ERASE_TOUT 10000000 +#define CFG_FLASH_PROTECTION + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +#define CFG_CS0_BASE CFG_FLASH_BASE +#define CFG_CS0_SIZE 2*1024*1024 +#define CFG_CS0_WIDTH 16 +#define CFG_CS0_RO 0 +#define CFG_CS0_WS 6 + +#define CFG_CS3_BASE 0xE0000000 +#define CFG_CS3_SIZE 1*1024*1024 +#define CFG_CS3_WIDTH 16 +#define CFG_CS3_RO 0 +#define CFG_CS3_WS 6 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_PADDR 0x0000000 +#define CFG_PADAT 0x0000000 + +#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_PBDDR 0x0000000 +#define CFG_PBDAT 0x0000000 + +#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PEHLPAR 0xC0 +#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CFG_DDRUA 0x05 +#define CFG_PJPAR 0xFF; + +/*----------------------------------------------------------------------- + * CCM configuration + */ + +#define CFG_CCM_SIZ 0 + +/*---------------------------------------------------------------------*/ +#endif /* _CONFIG_M5282EVB_H */ +/*---------------------------------------------------------------------*/ |