diff options
Diffstat (limited to 'include/configs/DB64360.h')
| -rw-r--r-- | include/configs/DB64360.h | 579 |
1 files changed, 0 insertions, 579 deletions
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h deleted file mode 100644 index b77c8b2..0000000 --- a/include/configs/DB64360.h +++ /dev/null @@ -1,579 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -/************************************************************************* - * (c) 2002 Datentechnik AG - Project: Dino - * - * - * $Id: DB64360.h,v 1.3 2003/04/26 04:58:13 brad Exp $ - * - ************************************************************************/ - -/************************************************************************* - * - * History: - * - * $Log: DB64360.h,v $ - * Revision 1.3 2003/04/26 04:58:13 brad - * Cosmetic changes and compiler warning cleanups - * - * Revision 1.2 2003/04/23 15:48:15 ingo - * mem. map output added - * - * Revision 1.1 2003/04/17 09:31:42 ias - * keymile changes 17_04_2003 - * - * Revision 1.10 2003/03/06 12:25:04 ias - * 750 FX CPU HID settings updated - * - * Revision 1.9 2003/03/03 16:14:36 ias - * cleanup compiler warnings of printf fuctions - * - * Revision 1.8 2003/03/03 15:11:44 ias - * Marvell MPSC-UART is working - * - * Revision 1.7 2003/02/26 12:15:45 ssu - * adapted default parameters to new board flash address - * - * Revision 1.6 2003/02/25 14:55:42 ssu - * changed default environment parameters - * - * Revision 1.5 2003/02/21 17:14:23 ias - * added extended SPD handling - * - * Revision 1.4 2003/01/14 09:16:08 ias - * PPCBoot for Marvel Beta 0.9 - * - * Revision 1.3 2002/12/03 13:56:26 ias - * Environment in flash support added - * - * Revision 1.2 2002/11/29 16:53:29 ias - * Flash support for STM added - * - * Revision 1.1 2002/11/29 13:36:31 ias - * Revision 0.1 of PPCBOOT (1.1.5) for Marvell DB64360 IBM750FX Board - * - working DDRRAM (only 32MByte of 128MB Modul) - * - working I2C Driver for SPD EEPROM read - * - working DUART 16650 for Serial Console - * - working "console" - * - * - * - ************************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* This define must be before the core.h include */ -#define CONFIG_DB64360 1 /* this is an DB64360 board */ - -#ifndef __ASSEMBLY__ -#include "../board/Marvell/include/core.h" -#endif - -/*-----------------------------------------------------*/ -/* #include "../board/db64360/local.h" */ -#ifndef __LOCAL_H -#define __LOCAL_H - -/* first ethernet */ -#define CONFIG_ETHADDR 64:36:00:00:00:01 - /* next two ethernet hwaddrs */ -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 64:36:00:00:00:02 -/* in the atlantis 64360 we have only 2 ETH port on the board, -if we use PCI it has its own MAC addr */ - -#define CONFIG_ENV_OVERWRITE -#endif /* __CONFIG_H */ - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_74xx /* we have a 750FX (override local.h) */ - -#define CONFIG_DB64360 1 /* this is an DB64360 board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ -/*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the - DRAM for ECC in the phase we are relocating to it, which isn't so sufficient. - so we will define our ECC CONFIG and initilize the DRAM for ECC in the DRAM initialization phase, - see sdram_init.c */ -#undef CONFIG_ECC /* enable ECC support */ -#define CONFIG_MV64360_ECC - -/* which initialization functions to call for this board */ -#define CONFIG_MISC_INIT_R /* initialize the icache L1 */ -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_SYS_BOARD_NAME "DB64360" -#define CONFIG_IDENT_STRING "Marvell DB64360 (1.1)" - -/*#define CONFIG_SYS_HUSH_PARSER */ -#undef CONFIG_SYS_HUSH_PARSER - - -/* - * The following defines let you select what serial you want to use - * for your console driver. - * - * what to do: - * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial - * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 - * to 0 below. - * - * to use the MPSC, #define CONFIG_MPSC. If you have wired up another - * mpsc channel, change CONFIG_MPSC_PORT to the desired value. - */ - -#define CONFIG_MPSC_PORT 0 - -/* to change the default ethernet port, use this define (options: 0, 1, 2) */ -#define MV_ETH_DEVS 2 - -/* #undef CONFIG_ETHER_PORT_MII */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK - - -#undef CONFIG_BOOTARGS -/*#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */ - -/* ronen - autoboot using tftp */ -#if (CONFIG_BOOTDELAY >= 0) -#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 uImage;\ - setenv bootargs ${bootargs} ${bootargs_root} nfsroot=${serverip}:${rootpath} \ - ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000; " - -#define CONFIG_BOOTARGS "console=ttyS0,115200" - -#endif - -/* ronen - the u-boot.bin should be ~0x30000 bytes */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "burn_uboot_sep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF4ffff; \ -cp.b 100000 FFF00000 0x40000;protect on 1:0-4;\0" \ - "burn_uboot_dep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF7ffff; \ -cp.b 100000 FFF00000 0x40000;protect on 1:0-7;\0" \ - "bootargs_root=root=/dev/nfs rw\0" \ - "bootargs_end=:::DB64360:eth0:none \0"\ - "ethprime=mv_enet0\0"\ - "standalone=fsload 0x400000 uImage;setenv bootargs ${bootargs} root=/dev/mtdblock/0 rw \ -ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" - -/* --------------------------------------------------------------------------------------------------------------- */ -/* New bootcommands for Marvell DB64360 c 2002 Ingo Assmus */ - -#define CONFIG_IPADDR 10.2.40.90 - -#define CONFIG_SERIAL "No. 1" -#define CONFIG_SERVERIP 10.2.1.126 -#define CONFIG_ROOTPATH "/mnt/yellow_dog_mini" - - -#define CONFIG_TESTDRAMDATA y -#define CONFIG_TESTDRAMADDRESS n -#define CONFIG_TESETDRAMWALK n - -/* --------------------------------------------------------------------------------------------------------------- */ - -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_ALTIVEC /* undef to disable */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ - -/* Use first bank for JFFS2, second bank contains U-Boot. - * - * Note: fake mtd_id's used, no linux mtd map file. - */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor1=db64360-1" -#define MTDPARTS_DEFAULT "mtdparts=db64360-1:-(jffs2)" -*/ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed default */ - -/* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/*#define CONFIG_SYS_MEMTEST_START 0x00400000 memtest works on */ -/*#define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */ -/*#define CONFIG_SYS_MEMTEST_END 0x07c00000 4 ... 124 MB in DRAM */ - -/* -#define CONFIG_SYS_DRAM_TEST - * DRAM tests - * CONFIG_SYS_DRAM_TEST - enables the following tests. - * - * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. - * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely - * addressable. Environment variable - * 'test_dram_address' must be set to 'y'. - * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. - */ -#define CONFIG_SYS_DRAM_TEST -#if defined(CONFIG_SYS_DRAM_TEST) -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -/* #define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ -#define CONFIG_SYS_DRAM_TEST_DATA -#define CONFIG_SYS_DRAM_TEST_ADDRESS -#define CONFIG_SYS_DRAM_TEST_WALK -#endif /* CONFIG_SYS_DRAM_TEST */ - -#undef CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ -#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ - -#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */ - -/*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ -#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ - -#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */ -#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 400MHZ -> 5.0 ns, for 133MHZ -> 7.50 ns */ - -/*ronen - this is the Tclk (MV64360 core) */ -#define CONFIG_SYS_TCLK 133000000 - - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_750FX_HID0 0x8000c084 -#define CONFIG_SYS_750FX_HID1 0x54800000 -#define CONFIG_SYS_750FX_HID2 0x00000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -/* - * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS - * To an unused memory region. The stack will remain in cache until RAM - * is initialized -*/ -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define RELOCATE_INTERNAL_RAM_ADDR -#ifdef RELOCATE_INTERNAL_RAM_ADDR - #define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf8000000 -#endif - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Dummies for BAT 4-7 */ -#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#define CONFIG_SYS_SDRAM2_BASE 0x20000000 -#define CONFIG_SYS_SDRAM3_BASE 0x30000000 -#define CONFIG_SYS_SDRAM4_BASE 0x40000000 -#define CONFIG_SYS_FLASH_BASE 0xfff00000 - -#define CONFIG_SYS_DFL_BOOTCS_BASE 0xff800000 -#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS*/ - -#define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */ -#define UART_BASE_BOOTM 0xfbb00000 /* in order to be sync with the kernel parameters. */ -#define PCI0_IO_BASE_BOOTM 0xfd000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ - -/* areas to map different things with the GT in physical space */ -#define CONFIG_SYS_DRAM_BANKS 4 - -/* What to put in the bats. */ -#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 - -/* Peripheral Device section */ - -/*******************************************************/ -/* We have on the db64360 Board : */ -/* GT-Chipset Register Area */ -/* GT-Chipset internal SRAM 256k */ -/* SRAM on external device module */ -/* Real time clock on external device module */ -/* dobble UART on external device module */ -/* Data flash on external device module */ -/* Boot flash on external device module */ -/*******************************************************/ -#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ -#define CONFIG_SYS_DB64360_RESET_ADDR 0x14000000 /* After power on Reset the DB64360 is here */ - -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ -#define CONFIG_SYS_DEV_BASE 0xfc000000 /* GT Devices CS start here */ - -#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE /* DEV_CS0 device modul sram */ -#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE) /* DEV_CS1 device modul real time clock (rtc) */ -#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE) /* DEV_CS2 device modul doubel uart (duart) */ -#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE) /* DEV_CS3 device modul large flash */ - -#define CONFIG_SYS_DEV0_SIZE _8M /* db64360 sram @ 0xfc00.0000 */ -#define CONFIG_SYS_DEV1_SIZE _8M /* db64360 rtc @ 0xfc80.0000 */ -#define CONFIG_SYS_DEV2_SIZE _16M /* db64360 duart @ 0xfd00.0000 */ -#define CONFIG_SYS_DEV3_SIZE _16M /* db64360 flash @ 0xfe00.0000 */ -/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ - -/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */ -#define CONFIG_SYS_DEV0_PAR 0x8FEFFFFF /* 32Bit sram */ -#define CONFIG_SYS_DEV1_PAR 0x8FCFFFFF /* 8Bit rtc */ -#define CONFIG_SYS_DEV2_PAR 0x8FCFFFFF /* 8Bit duart */ -#define CONFIG_SYS_8BIT_BOOT_PAR 0x8FCFFFFF /* 8Bit flash */ -#define CONFIG_SYS_32BIT_BOOT_PAR 0x8FEFFFFF /* 32Bit flash */ - - /* c 4 a 8 2 4 1 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ - /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ - /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ - /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ - - -/* ronen - update MPP Control MV64360*/ -#define CONFIG_SYS_MPP_CONTROL_0 0x02222222 -#define CONFIG_SYS_MPP_CONTROL_1 0x11333011 -#define CONFIG_SYS_MPP_CONTROL_2 0x40431111 -#define CONFIG_SYS_MPP_CONTROL_3 0x00000044 - -/*# define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102 0=hiZ 1=MPSC0 2=ETH 0 and 2 RMII */ - - -# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x2c600000 /* 1111 1001 0000 1111 1100 0000 0000 0000*/ - /* gpp[31] gpp[30] gpp[29] gpp[28] */ - /* gpp[27] gpp[24]*/ - /* gpp[19:14] */ - -/* setup new config_value for MV64360 DDR-RAM !! */ -# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ - -#define CONFIG_SYS_DUART_IO CONFIG_SYS_DEV2_SPACE -#define CONFIG_SYS_DUART_CHAN 1 /* channel to use for console */ -#define CONFIG_SYS_INIT_CHAN1 -#define CONFIG_SYS_INIT_CHAN2 - -#define SRAM_BASE CONFIG_SYS_DEV0_SPACE -#define SRAM_SIZE 0x00100000 /* 1 MB of sram */ - - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ - -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_EEPRO100 /* ronen - Support for Intel 82557/82559/82559ER chips */ - -/* PCI MEMORY MAP section */ -#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI0_MEM_SIZE _128M -#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 -#define CONFIG_SYS_PCI1_MEM_SIZE _128M - -#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) -#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) - -/* PCI I/O MAP section */ -#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 -#define CONFIG_SYS_PCI0_IO_SIZE _16M -#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 -#define CONFIG_SYS_PCI1_IO_SIZE _16M - -#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) -#define CONFIG_SYS_PCI0_IO_SPACE_PCI (CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */ -#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) -#define CONFIG_SYS_PCI1_IO_SPACE_PCI (CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */ - -#if defined (CONFIG_750CX) -#define CONFIG_SYS_PCI_IDSEL 0x0 -#else -#define CONFIG_SYS_PCI_IDSEL 0x30 -#endif -/*---------------------------------------------------------------------- - * Initial BAT mappings - */ - -/* NOTES: - * 1) GUARDED and WRITE_THRU not allowed in IBATS - * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT - */ - -/* SDRAM */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* init ram */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PCI0, PCI1 in one BAT */ -#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* GT regs, bootrom, all the devices, PCI I/O */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* I2C addresses for the two DIMM SPD chips */ -#define DIMM0_I2C_ADDR 0x56 -#define DIMM1_I2C_ADDR 0x54 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE3 /* extra flash at device 3 */ -#define CONFIG_SYS_EXTRA_FLASH_WIDTH 4 /* 32 bit */ -#define CONFIG_SYS_BOOT_FLASH_WIDTH 1 /* 8 bit */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ -#define CONFIG_SYS_FLASH_CFI 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ -/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * L2CR setup -- make sure this is right for your board! - * look in include/mpc74xx.h for the defines used here - */ - -#define CONFIG_SYS_L2 - - -#if defined (CONFIG_750CX) || defined (CONFIG_750FX) -#define L2_INIT 0 -#else - -#define L2_INIT 0 -/* -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -*/ -#endif - -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -#define CONFIG_SYS_BOARD_ASM_INIT 1 - -#endif /* __CONFIG_H */ |