diff options
Diffstat (limited to 'include/configs/CPCI750.h')
| -rw-r--r-- | include/configs/CPCI750.h | 404 |
1 files changed, 202 insertions, 202 deletions
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 46f80d1..8494faa 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -68,18 +68,18 @@ #define CONFIG_BOARD_PRE_INIT #define CONFIG_BOARD_EARLY_INIT_F 1 -#define CFG_BOARD_NAME "CPCI750" +#define CONFIG_SYS_BOARD_NAME "CPCI750" #define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX" -/*#define CFG_HUSH_PARSER*/ -#define CFG_HUSH_PARSER +/*#define CONFIG_SYS_HUSH_PARSER*/ +#define CONFIG_SYS_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE 1 /* Define which ETH port will be used for connecting the network */ -#define CFG_ETH_PORT ETH_0 +#define CONFIG_SYS_ETH_PORT ETH_0 /* * The following defines let you select what serial you want to use @@ -87,7 +87,7 @@ * * what to do: * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial - * cable onto the second DUART channel, change the CFG_DUART port from 1 + * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 * to 0 below. * * to use the MPSC, #define CONFIG_MPSC. If you have wired up another @@ -130,7 +130,7 @@ #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ @@ -175,75 +175,75 @@ #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VIDEO_LOGO #define CONFIG_I8042_KBD -#define CFG_ISA_IO 0 +#define CONFIG_SYS_ISA_IO 0 #endif /* * Miscellaneous configurable options */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 -#define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_SPEED 80000 /* I2C speed default */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed default */ -#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -/*#define CFG_MEMTEST_START 0x00400000*/ /* memtest works on */ -/*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ +/*#define CONFIG_SYS_MEMTEST_START 0x00400000*/ /* memtest works on */ +/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ +/*#define CONFIG_SYS_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ /* -#define CFG_DRAM_TEST +#define CONFIG_SYS_DRAM_TEST * DRAM tests - * CFG_DRAM_TEST - enables the following tests. + * CONFIG_SYS_DRAM_TEST - enables the following tests. * - * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines + * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines * Environment variable 'test_dram_data' must be * set to 'y'. - * CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely + * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely * addressable. Environment variable * 'test_dram_address' must be set to 'y'. - * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. + * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. * This test takes about 6 minutes to test 64 MB. * Environment variable 'test_dram_walk' must be * set to 'y'. */ -#define CFG_DRAM_TEST -#if defined(CFG_DRAM_TEST) -#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ -/*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ -#define CFG_DRAM_TEST_DATA -#define CFG_DRAM_TEST_ADDRESS -#define CFG_DRAM_TEST_WALK -#endif /* CFG_DRAM_TEST */ +#define CONFIG_SYS_DRAM_TEST +#if defined(CONFIG_SYS_DRAM_TEST) +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ +#define CONFIG_SYS_DRAM_TEST_DATA +#define CONFIG_SYS_DRAM_TEST_ADDRESS +#define CONFIG_SYS_DRAM_TEST_WALK +#endif /* CONFIG_SYS_DRAM_TEST */ #define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ -#undef CFG_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ +#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ -#define CFG_LOAD_ADDR 0x00300000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ -#define CFG_HZ 1000 /* decr freq: 1ms ticks */ -#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ -#define CFG_BUS_CLK CFG_BUS_HZ +#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ +#define CONFIG_SYS_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ +#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CFG_TCLK 133000000 +#define CONFIG_SYS_TCLK 133000000 -/*#define CFG_750FX_HID0 0x8000c084*/ -#define CFG_750FX_HID0 0x80008484 -#define CFG_750FX_HID1 0x54800000 -#define CFG_750FX_HID2 0x00000000 +/*#define CONFIG_SYS_750FX_HID0 0x8000c084*/ +#define CONFIG_SYS_750FX_HID0 0x80008484 +#define CONFIG_SYS_750FX_HID1 0x54800000 +#define CONFIG_SYS_750FX_HID2 0x00000000 /* * Low Level Configuration Settings @@ -256,63 +256,63 @@ */ /* - * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS + * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS * To an unused memory region. The stack will remain in cache until RAM * is initialized */ -#undef CFG_INIT_RAM_LOCK -/* #define CFG_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ -/* #define CFG_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ -#define CFG_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ -#define CFG_INIT_RAM_END 0x1000 -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#undef CONFIG_SYS_INIT_RAM_LOCK +/* #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ +/* #define CONFIG_SYS_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ +#define CONFIG_SYS_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ +#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR -/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/ -#define CFG_INTERNAL_RAM_ADDR 0xf1080000 +/*#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xfba00000*/ +#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf1080000 #endif /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* Dummies for BAT 4-7 */ -#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#define CFG_SDRAM2_BASE 0x20000000 -#define CFG_SDRAM3_BASE 0x30000000 -#define CFG_SDRAM4_BASE 0x40000000 -#define CFG_RESET_ADDRESS 0xfff00100 -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE 0xfff00000 -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ +#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ +#define CONFIG_SYS_SDRAM2_BASE 0x20000000 +#define CONFIG_SYS_SDRAM3_BASE 0x30000000 +#define CONFIG_SYS_SDRAM4_BASE 0x40000000 +#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE 0xfff00000 +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ #define CONFIG_FLASH_CFI_DRIVER -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */ -#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */ -#define CFG_FLASH_INCREMENT 0x01000000 /* size of flash bank */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \ - CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT, \ - CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT, \ - CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT } -#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of flash banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max number of memory banks */ +#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 /* size of flash bank */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ + CONFIG_SYS_FLASH_BASE + 1*CONFIG_SYS_FLASH_INCREMENT, \ + CONFIG_SYS_FLASH_BASE + 2*CONFIG_SYS_FLASH_INCREMENT, \ + CONFIG_SYS_FLASH_BASE + 3*CONFIG_SYS_FLASH_INCREMENT } +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* show if bank is empty */ /* areas to map different things with the GT in physical space */ -#define CFG_DRAM_BANKS 4 +#define CONFIG_SYS_DRAM_BANKS 4 /* What to put in the bats. */ -#define CFG_MISC_REGION_BASE 0xf0000000 +#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 /* Peripheral Device section */ @@ -326,37 +326,37 @@ /* Data flash on external device module */ /* Boot flash on external device module */ /*******************************************************/ -#define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ -#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ +#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ +#define CONFIG_SYS_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ #undef MARVEL_STANDARD_CFG #ifndef MARVEL_STANDARD_CFG /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -#define CFG_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ -/*#define CFG_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */ -#define CFG_INT_SRAM_BASE 0xf1080000 /* GT offers 256k internal fast SRAM */ - -#define CFG_BOOT_SPACE 0xff000000 /* BOOT_CS0 flash 0 */ -#define CFG_DEV0_SPACE 0xfc000000 /* DEV_CS0 flash 1 */ -#define CFG_DEV1_SPACE 0xfd000000 /* DEV_CS1 flash 2 */ -#define CFG_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */ -#define CFG_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */ - -#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */ -#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */ -#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */ -#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */ -#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */ +#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ +/*#define CONFIG_SYS_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */ +#define CONFIG_SYS_INT_SRAM_BASE 0xf1080000 /* GT offers 256k internal fast SRAM */ + +#define CONFIG_SYS_BOOT_SPACE 0xff000000 /* BOOT_CS0 flash 0 */ +#define CONFIG_SYS_DEV0_SPACE 0xfc000000 /* DEV_CS0 flash 1 */ +#define CONFIG_SYS_DEV1_SPACE 0xfd000000 /* DEV_CS1 flash 2 */ +#define CONFIG_SYS_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */ +#define CONFIG_SYS_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */ + +#define CONFIG_SYS_BOOT_SIZE _16M /* cpci750 flash 0 */ +#define CONFIG_SYS_DEV0_SIZE _16M /* cpci750 flash 1 */ +#define CONFIG_SYS_DEV1_SIZE _16M /* cpci750 flash 2 */ +#define CONFIG_SYS_DEV2_SIZE _16M /* cpci750 flash 3 */ +#define CONFIG_SYS_DEV3_SIZE _16M /* cpci750 nvram/can */ /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ #endif /* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */ -#define CFG_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CFG_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CFG_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */ -#define CFG_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ +#define CONFIG_SYS_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */ +#define CONFIG_SYS_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */ +#define CONFIG_SYS_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */ +#define CONFIG_SYS_DEV3_PAR 0x8FCFFFFF /* nvram/can */ +#define CONFIG_SYS_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ /* c 4 a 8 2 4 1 c */ /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ @@ -366,18 +366,18 @@ /* MPP Control MV64360 Appendix P P. 632*/ -#define CFG_MPP_CONTROL_0 0x00002222 /* */ -#define CFG_MPP_CONTROL_1 0x11110000 /* */ -#define CFG_MPP_CONTROL_2 0x11111111 /* */ -#define CFG_MPP_CONTROL_3 0x00001111 /* */ -/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */ +#define CONFIG_SYS_MPP_CONTROL_0 0x00002222 /* */ +#define CONFIG_SYS_MPP_CONTROL_1 0x11110000 /* */ +#define CONFIG_SYS_MPP_CONTROL_2 0x11111111 /* */ +#define CONFIG_SYS_MPP_CONTROL_3 0x00001111 /* */ +/* #define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102*/ /* */ -#define CFG_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/ +#define CONFIG_SYS_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/ /* setup new config_value for MV64360 DDR-RAM To_do !! */ -/*# define CFG_SDRAM_CONFIG 0xd8e18200*/ /* 0x448 */ -/*# define CFG_SDRAM_CONFIG 0xd8e14400*/ /* 0x1400 */ +/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200*/ /* 0x448 */ +/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e14400*/ /* 0x1400 */ /* GB has high prio. idma has low prio MPSC has low prio @@ -393,7 +393,7 @@ virtual interleaving enable */ /* 15 14 13:0 */ /* 0 1 0x400 */ -# define CFG_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ +# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ /*----------------------------------------------------------------------- @@ -411,31 +411,31 @@ #define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ /* PCI MEMORY MAP section */ -#define CFG_PCI0_MEM_BASE 0x80000000 -#define CFG_PCI0_MEM_SIZE _128M -#define CFG_PCI1_MEM_BASE 0x88000000 -#define CFG_PCI1_MEM_SIZE _128M +#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI0_MEM_SIZE _128M +#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 +#define CONFIG_SYS_PCI1_MEM_SIZE _128M -#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE) -#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE) +#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) +#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) /* PCI I/O MAP section */ -#define CFG_PCI0_IO_BASE 0xfa000000 -#define CFG_PCI0_IO_SIZE _16M -#define CFG_PCI1_IO_BASE 0xfb000000 -#define CFG_PCI1_IO_SIZE _16M +#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 +#define CONFIG_SYS_PCI0_IO_SIZE _16M +#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 +#define CONFIG_SYS_PCI1_IO_SIZE _16M -#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE) -#define CFG_PCI0_IO_SPACE_PCI 0x00000000 -#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE) -#define CFG_PCI1_IO_SPACE_PCI 0x00000000 +#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) +#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000 +#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) +#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000 -#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE) +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE) #if defined (CONFIG_750CX) -#define CFG_PCI_IDSEL 0x0 +#define CONFIG_SYS_PCI_IDSEL 0x0 #else -#define CFG_PCI_IDSEL 0x30 +#define CONFIG_SYS_PCI_IDSEL 0x30 #endif /*----------------------------------------------------------------------- @@ -447,16 +447,16 @@ #define CONFIG_IDE_RESET /* no reset for ide supported */ #define CONFIG_IDE_PREINIT /* check for units */ -#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ +#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 1 IDE busses */ +#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR 0 -#define CFG_ATA_IDE0_OFFSET 0 -#define CFG_ATA_IDE1_OFFSET 0 +#define CONFIG_SYS_ATA_BASE_ADDR 0 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0 +#define CONFIG_SYS_ATA_IDE1_OFFSET 0 -#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ /*---------------------------------------------------------------------- @@ -469,28 +469,28 @@ */ /* SDRAM */ -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT0U CFG_IBAT0U +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U /* init ram */ -#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U /* PCI0, PCI1 in one BAT */ -#define CFG_IBAT2L BATL_NO_ACCESS -#define CFG_IBAT2U CFG_DBAT2U -#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS +#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) /* GT regs, bootrom, all the devices, PCI I/O */ -#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) -#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) -#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) +#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U /* * 750FX IBAT and DBAT pairs (To_do: define regins for I(D)BAT4 - I(D)BAT7) @@ -501,52 +501,52 @@ /*#define SETUP_HIGH_BATS_FX750*/ /* initialize BATS 4-7 */ #ifdef SETUP_HIGH_BATS_FX750 -#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT4U CFG_IBAT4U +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U /* IBAT5 and DBAT5 */ -#define CFG_IBAT5L (CFG_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT5U (CFG_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT5L (CFG_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT5U CFG_IBAT5U +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U /* IBAT6 and DBAT6 */ -#define CFG_IBAT6L (CFG_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT6U (CFG_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT6L (CFG_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT6U CFG_IBAT6U +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U /* IBAT7 and DBAT7 */ -#define CFG_IBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT7U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT7U CFG_IBAT7U +#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U #else /* set em out of range for Linux !!!!!!!!!!! */ -#define CFG_IBAT4L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT4U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT4L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT4U CFG_IBAT4U +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U /* IBAT5 and DBAT5 */ -#define CFG_IBAT5L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT5U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT5L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT5U CFG_IBAT4U +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT4U /* IBAT6 and DBAT6 */ -#define CFG_IBAT6L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT6U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT6L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT6U CFG_IBAT4U +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT4U /* IBAT7 and DBAT7 */ -#define CFG_IBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT7U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT7U CFG_IBAT4U +#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT4U #endif /* FIXME: ingo end: disable BATs for Linux Kernel */ @@ -560,42 +560,42 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_BOOT_FLASH_WIDTH 2 /* 16 bit */ +#define CONFIG_SYS_BOOT_FLASH_WIDTH 2 /* 16 bit */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ #if 0 #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ -/* #define CONFIG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ +/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ #endif #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CFG_EEPROM_PAGE_WRITE_BITS 5 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_EEPROM_ADDR 0x050 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x050 #define CONFIG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */ #define CONFIG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/ -#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ -#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */ -#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40) +#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ +#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ +#define CONFIG_SYS_VXWORKS_MAC_PTR (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-0x40) /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -603,8 +603,8 @@ * look in include/mpc74xx.h for the defines used here */ -/*#define CFG_L2*/ -#undef CFG_L2 +/*#define CONFIG_SYS_L2*/ +#undef CONFIG_SYS_L2 /* #ifdef CONFIG_750CX*/ #if defined (CONFIG_750CX) || defined (CONFIG_750FX) @@ -624,6 +624,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_BOARD_ASM_INIT 1 +#define CONFIG_SYS_BOARD_ASM_INIT 1 #endif /* __CONFIG_H */ |