diff options
Diffstat (limited to 'include/configs/Alaska8220.h')
| -rw-r--r-- | include/configs/Alaska8220.h | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h new file mode 100644 index 0000000..5cf2a04 --- /dev/null +++ b/include/configs/Alaska8220.h @@ -0,0 +1,309 @@ +/* + * (C) Copyright 2004 + * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MPC8220 1 +#define CONFIG_ALASKA8220 1 /* ... on Alaska board */ + +/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to + determine the CPU speed. */ +#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */ +#define CONFIG_EXTUART_CONSOLE 1 + +#ifdef CONFIG_EXTUART_CONSOLE +# define CFG_NS16550 +# define CFG_NS16550_REG_SIZE 1 +# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008) +#endif + +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ + + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * Supported commands + */ +/* CONFIG_CMD_DFL includes CFG_CMD_BDI (bdinfo), CFG_CMD_LOADS (loads), + CFG_CMD_LOADB (loadb), CFG_CMD_IMI (iminfo), CFG_CMD_FLASH + (flinfo, erase, protect), CFG_CMD_MEMORY (md, mm, nm, mw, cp, cmp, + crc, base, loop, mtest), CFG_CMD_ENV (printenv, setenv, saveenv), + CFG_CMD_BOOTD (bootd), CFG_CMD_CONSOLE (coninfo), CFG_CMD_NET (bootp, + tftpboot, rarpboot), CFG_CMD_RUN, CFG_CMD_MISC (sleep, etc), + CFG_CMD_BSP, CFG_CMD_IMLS, CFG_CMD_FPGA */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_BOOTD | \ + CFG_CMD_CACHE | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM \ + ) +/* CFG_CMD_DHCP | \ */ +/* CFG_CMD_MII | \ */ +/* CFG_CMD_PCI | \ */ +/* CFG_CMD_USB */ + +# define CONFIG_NET_MULTI +/*#if (CONFIG_COMMANDS & CFG_CMD_NET) +# define CONFIG_NET_MULTI +#else +# undef CONFIG_NET_MULTI +#endif*/ + + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTARGS "root=/dev/ram rw" +#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 +#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 +#define CONFIG_IPADDR 192.162.1.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.162.1.1 +#define CONFIG_GATEWAYIP 192.162.1.1 +#define CONFIG_HOSTNAME Alaska +#define CONFIG_OVERWRITE_ETHADDR_ONCE + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 +#define CFG_I2C_MODULE 1 + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +/* +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0 +#define CFG_ENV_SIZE 256 +*/ + +/* If CFG_AMD_BOOT is defined, the the system will boot from AMD. + else undefined it will boot from Intel Strata flash */ +#define CFG_AMD_BOOT 1 + +/* + * Flexbus Chipselect configuration + */ +#if defined (CFG_AMD_BOOT) +#define CFG_CS0_BASE 0xfff0 +#define CFG_CS0_MASK 0x00080000 /* 512 KB */ +#define CFG_CS0_CTRL 0x003f0d40 + +#define CFG_CS1_BASE 0xfe00 +#define CFG_CS1_MASK 0x01000000 /* 16 MB */ +#define CFG_CS1_CTRL 0x003f1540 +#else +#define CFG_CS0_BASE 0xff00 +#define CFG_CS0_MASK 0x01000000 /* 16 MB */ +#define CFG_CS0_CTRL 0x003f1540 + +#define CFG_CS1_BASE 0xfe08 +#define CFG_CS1_MASK 0x00080000 /* 512 KB */ +#define CFG_CS1_CTRL 0x003f0d40 +#endif + +#define CFG_CS2_BASE 0xf100 +#define CFG_CS2_MASK 0x00040000 +#define CFG_CS2_CTRL 0x003f1140 + +#define CFG_CS3_BASE 0xf200 +#define CFG_CS3_MASK 0x00040000 +#define CFG_CS3_CTRL 0x003f1100 + + +#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH1_BASE (CFG_CS1_BASE << 16) + +#if defined (CFG_AMD_BOOT) +#define CFG_AMD_BASE CFG_FLASH0_BASE +#define CFG_INTEL_BASE CFG_FLASH1_BASE + 0xf00000 +#define CFG_FLASH_BASE CFG_AMD_BASE +#else +#define CFG_INTEL_BASE CFG_FLASH0_BASE + 0xf00000 +#define CFG_AMD_BASE CFG_FLASH1_BASE +#define CFG_FLASH_BASE CFG_INTEL_BASE +#endif + +#define CFG_CPLD_BASE (CFG_CS2_BASE << 16) +#define CFG_FPGA_BASE (CFG_CS3_BASE << 16) + + +#define CFG_MAX_FLASH_BANKS 4 /* max num of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ + +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ +#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ + +#define CFG_FLASH_CHECKSUM +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#if defined (CFG_AMD_BOOT) +#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE) +#define CFG_ENV_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE) +#define CFG_ENV1_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE +#else +#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE) +#define CFG_ENV_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE) +#define CFG_ENV1_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE +#endif + +#define CONFIG_ENV_OVERWRITE 1 + +#if defined CFG_ENV_IS_IN_FLASH +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_EEPROM +#elif defined CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#undef CFG_ENV_IS_IN_EEPROM +#elif defined CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#endif + +#ifndef CFG_JFFS2_FIRST_SECTOR +#define CFG_JFFS2_FIRST_SECTOR 0 +#endif +#ifndef CFG_JFFS2_FIRST_BANK +#define CFG_JFFS2_FIRST_BANK 0 +#endif +#ifndef CFG_JFFS2_NUM_BANKS +#define CFG_JFFS2_NUM_BANKS 1 +#endif +#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 +#define CFG_SRAM_BASE (CFG_MBAR + 0x20000) +#define CFG_SRAM_SIZE 0x8000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR (CFG_MBAR + 0x20000) +#define CFG_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC8220_FEC 1 +#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ +#define CONFIG_PHY_ADDR 0x18 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#endif /* __CONFIG_H */ |