summaryrefslogtreecommitdiff
path: root/include/cmd_bsp.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/cmd_bsp.h')
-rw-r--r--include/cmd_bsp.h313
1 files changed, 313 insertions, 0 deletions
diff --git a/include/cmd_bsp.h b/include/cmd_bsp.h
new file mode 100644
index 0000000..b39d50b
--- /dev/null
+++ b/include/cmd_bsp.h
@@ -0,0 +1,313 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CMD_BSP_H_
+#define _CMD_BSP_H_
+
+#include <common.h>
+#include <command.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+/* ----- LWMON -----------------------------------------------------------------
+ */
+#if defined(CONFIG_LWMON)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "pic", 3, 4, 1, do_pic, \
+ "pic - read and write PIC registers\n", \
+ "read reg - read PIC register `reg'\n" \
+ "pic write reg val - write value `val' to PIC register `reg'\n" \
+), MK_CMD_TBL_ENTRY( \
+ "kbd", 3, 1, 1, do_kbd, \
+ "kbd - read keyboard status\n", \
+ NULL \
+), MK_CMD_TBL_ENTRY( \
+ "lsb", 3, 2, 1, do_lsb, \
+ "lsb - check and set LSB switch\n", \
+ "on - switch LSB on\n" \
+ "lsb off - switch LSB off\n" \
+ "lsb - print current setting\n" \
+),
+int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_LWMON */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PCU E -----------------------------------------------------------------
+ */
+#if defined(CONFIG_PCU_E)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "puma", 4, 4, 1, do_puma, \
+ "puma - access PUMA FPGA\n", \
+ "status - print PUMA status\n" \
+ "puma load addr len - load PUMA configuration data\n" \
+),
+int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_PCU_E */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- CCM/SCM ---------------------------------------------------------------
+ */
+#if defined(CONFIG_CCM) || defined(CONFIG_SCM)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "fpga", 4, 4, 1, do_fpga, \
+ "fpga - access FPGA(s)\n", \
+ "fpga status [name] - print FPGA status\n" \
+ "fpga reset [name] - reset FPGA\n" \
+ "fpga load [name] addr - load FPGA configuration data\n" \
+),
+int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_CCM, CONFIG_SCM */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PIP405 -----------------------------------------------------------------
+ */
+#if defined(CONFIG_PIP405)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "pip405", 4, 6, 1, do_pip405, \
+ "pip405 - PIP405 specific Cmds\n", \
+ "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
+ "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" \
+ "pip405 flash mps - updates U-Boot with image from MPS\n" \
+),
+int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_PIP405 */
+/* ----------------------------------------------------------------------------*/
+/* ----- MIP405 -----------------------------------------------------------------
+ */
+#if defined(CONFIG_MIP405)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "mip405", 4, 6, 1, do_mip405, \
+ "mip405 - MIP405 specific Cmds\n", \
+ "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
+ "mip405 flash mps - updates U-Boot with image from MPS\n" \
+),
+int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_MIP405 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- DASA_SIM ---------------------------------------------------------------
+ */
+#if defined(CONFIG_DASA_SIM)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "pci9054", 7, 3, 1, do_pci9054, \
+ "pci9054 - PLX PCI9054 EEPROM access\n", \
+ "pci9054 info - print EEPROM values\n" \
+ "pci9054 update - updates EEPROM with default values\n" \
+),
+int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_DASA_SIM */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- HYMOD -----------------------------------------------------------------
+ */
+#if defined(CONFIG_HYMOD)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "fpga", 4, 6, 1, do_fpga, \
+ "fpga - FPGA sub-system\n", \
+ "load [type] addr size\n" \
+ " - write the configuration data at memory address `addr',\n" \
+ " size `size' bytes, into the FPGA of type `type' (either\n" \
+ " `main' or `mezz', default `main'). e.g.\n" \
+ " `fpga load 100000 7d8f'\n" \
+ " loads the main FPGA with config data at address 100000\n" \
+ " HEX, size 7d8f HEX (32143 DEC) bytes\n" \
+ "fpga tftp file addr\n" \
+ " - transfers `file' from the tftp server into memory at\n" \
+ " address `addr', then writes the entire file contents\n" \
+ " into the main FPGA\n" \
+ "fpga store addr\n" \
+ " - read configuration data from the main FPGA (the mezz\n" \
+ " FPGA is write-only), into address `addr'. There must be\n" \
+ " enough memory available at `addr' to hold all the config\n"\
+ " data - the size of which is determined by VC:???\n" \
+ "fpga info\n" \
+ " - print information about the Hymod FPGA, namely the\n" \
+ " memory addresses at which the four FPGA local bus\n" \
+ " address spaces appear in the physical address space\n" \
+), MK_CMD_TBL_ENTRY( \
+ "eeclear", 4, 1, 0, do_eecl, \
+ "eeclear - Clear the eeprom on a Hymod board \n", \
+ "[type]\n" \
+ " - write zeroes into the EEPROM on the board of type `type'\n"\
+ " (`type' is either `main' or `mezz' - default `main')\n" \
+ " Note: the EEPROM write enable jumper must be installed\n" \
+),
+int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_HYMOD */
+/* ----------------------------------------------------------------------------*/
+/* CRAY405 (L1) */
+#if defined (CONFIG_CRAYL1)
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "L1cmd", 5, 4, 1, do_crayL1, \
+ "L1cmd - L1 update, setup, commands \n", \
+ "L1cmd update - update flash images from host\n" \
+ "L1cmd boot - nfs or ramboot L1\n" \
+),
+int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+#endif /* CONFIG_CRAY405 */
+/* ----------------------------------------------------------------------------*/
+
+#if defined (CONFIG_EVB64260)
+/* ----- EVB64260 -------------------------------------------------------------*/
+#ifdef CONFIG_ZUMA_V2
+#define CMD_TBL_BSP ZUMA_TBL_ENTRY
+
+#define ZUMA_TBL_ENTRY MK_CMD_TBL_ENTRY( \
+ "zinit", 5, 1, 0, do_zuma_init_pbb, \
+ "zinit - init zuma pbb\n", \
+ "\n" \
+ " - init zuma pbb\n" \
+), MK_CMD_TBL_ENTRY( \
+ "zdtest", 6, 3, 1, do_zuma_test_dma, \
+ "zdtest - run dma test\n", \
+ "[cmd [count]]\n" \
+ " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \
+), MK_CMD_TBL_ENTRY( \
+ "zminit", 5, 1, 0, do_zuma_init_mbox, \
+ "zminit - init zuma mbox\n", \
+ "\n" \
+ " - init zuma mbox\n" \
+),
+
+int do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+void zuma_init_pbb(void);
+int zuma_mbox_init(void);
+int zuma_test_dma(int cmd, int size);
+#else
+#define CMD_TBL_BSP
+#endif /* ZUMA_NTL */
+
+#endif /* CONFIG_EVB64260 */
+/* ----------------------------------------------------------------------------*/
+
+/* -----W7O--------------------------------------------------------------------*/
+#if defined(CONFIG_W7O)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "vpd", 3, 2, 1, do_vpd, \
+ "vpd - Read Vital Product Data\n", \
+ "[dev_addr]\n" \
+ " - Read VPD Data from default address, or device address 'dev_addr'.\n" \
+),
+
+extern int do_vpd (cmd_tbl_t *, int, int, char *[]);
+
+#endif /* CONFIG_W7O */
+/* ----------------------------------------------------------------------------*/
+
+/* ---- PCIPPC2 / PCIPPC6 -----------------------------------------------------*/
+#if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6)
+#if defined(CONFIG_WATCHDOG)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "wd", 3, 2, 1, do_wd, \
+ "wd - check and set watchdog\n", \
+ "on - switch watchDog on\n" \
+ "wd off - switch watchdog off\n" \
+ "wd - print current status\n" \
+),
+
+extern int do_wd (cmd_tbl_t *, int, int, char *[]);
+
+#else
+#define CMD_TBL_BSP
+#endif /* CONFIG_WATCHDOG */
+
+#endif /* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PN62 -----------------------------------------------------------------*/
+#if defined(CONFIG_PN62)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "loadpci", 5, 2, 1, do_loadpci, \
+ "loadpci - load binary file over PCI\n", \
+ "[addr]\n" \
+ " - load binary file over PCI to address 'addr'\n" \
+), MK_CMD_TBL_ENTRY( \
+ "led" , 3, 3, 1, do_led, \
+ "led - set LED 0..11 on the PN62 board\n", \
+ "i fun\n" \
+ " - set 'i'th LED to function 'fun'\n" \
+),
+
+extern int do_loadpci (cmd_tbl_t *, int, int, char *[]);
+extern int do_led (cmd_tbl_t *, int, int, char *[]);
+#endif /* CONFIG_PN62 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- TRAB ------------------------------------------------------------------
+ */
+#if defined(CONFIG_TRAB)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "kbd", 3, 1, 1, do_kbd, \
+ "kbd - read keyboard status\n", \
+ NULL \
+),
+
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_TRAB */
+/* ----------------------------------------------------------------------------*/
+
+#else
+#define CMD_TBL_BSP
+#endif /* CFG_CMD_BSP */
+
+/* ----- R360MPI ---------------------------------------------------------------
+ */
+#if defined(CONFIG_R360MPI)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
+ "kbd", 3, 1, 1, do_kbd, \
+ "kbd - read keyboard status\n", \
+ NULL \
+),
+
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_R360MPI */
+/* ----------------------------------------------------------------------------*/
+
+#endif /* _CMD_BSP_H_ */