summaryrefslogtreecommitdiff
path: root/include/cmd_bsp.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/cmd_bsp.h')
-rw-r--r--include/cmd_bsp.h318
1 files changed, 1 insertions, 317 deletions
diff --git a/include/cmd_bsp.h b/include/cmd_bsp.h
index 008008a..417d32f 100644
--- a/include/cmd_bsp.h
+++ b/include/cmd_bsp.h
@@ -24,322 +24,6 @@
#ifndef _CMD_BSP_H_
#define _CMD_BSP_H_
-#include <common.h>
-#include <command.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-
-/* ----- LWMON ---------------------------------------------------------
- */
-#if defined(CONFIG_LWMON)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "pic", 3, 4, 1, do_pic, \
- "pic - read and write PIC registers\n", \
- "read reg - read PIC register `reg'\n" \
- "pic write reg val - write value `val' to PIC register `reg'\n" \
-), MK_CMD_TBL_ENTRY( \
- "kbd", 3, 1, 1, do_kbd, \
- "kbd - read keyboard status\n", \
- NULL \
-), MK_CMD_TBL_ENTRY( \
- "lsb", 3, 2, 1, do_lsb, \
- "lsb - check and set LSB switch\n", \
- "on - switch LSB on\n" \
- "lsb off - switch LSB off\n" \
- "lsb - print current setting\n" \
-),
-int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_LWMON */
-/* -------------------------------------------------------------------- */
-
-/* ----- PCU E -------------------------------------------------------- */
-#if defined(CONFIG_PCU_E)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "puma", 4, 4, 1, do_puma, \
- "puma - access PUMA FPGA\n", \
- "status - print PUMA status\n" \
- "puma load addr len - load PUMA configuration data\n" \
-),
-int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_PCU_E */
-/* -------------------------------------------------------------------- */
-
-/* ----- CCM/SCM ------------------------------------------------------ */
-#if defined(CONFIG_CCM) || defined(CONFIG_SCM)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "fpga", 4, 4, 1, do_fpga, \
- "fpga - access FPGA(s)\n", \
- "fpga status [name] - print FPGA status\n" \
- "fpga reset [name] - reset FPGA\n" \
- "fpga load [name] addr - load FPGA configuration data\n" \
-),
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_CCM, CONFIG_SCM */
-/* -------------------------------------------------------------------- */
-
-/* ----- PIP405 ------------------------------------------------------- */
-#if defined(CONFIG_PIP405)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "pip405", 4, 6, 1, do_pip405, \
- "pip405 - PIP405 specific Cmds\n", \
- "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
- "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" \
- "pip405 flash mps - updates U-Boot with image from MPS\n" \
-),
-int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_PIP405 */
-/* -------------------------------------------------------------------- */
-
-/* ----- MIP405 ------------------------------------------------------- */
-#if defined(CONFIG_MIP405)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "mip405", 4, 6, 1, do_mip405, \
- "mip405 - MIP405 specific Cmds\n", \
- "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
- "mip405 flash mps - updates U-Boot with image from MPS\n" \
-),
-int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_MIP405 */
-/* ----- VCMA9 -----------------------------------------------------------------
- */
-#if defined(CONFIG_VCMA9)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "vcma9", 4, 6, 1, do_vcma9, \
- "vcma9 - VCMA9 specific Cmds\n", \
- "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
-),
-int do_vcma9 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_VCMA9 */
-/* ----------------------------------------------------------------------------*/
-
-/* ----- DASA_SIM ----------------------------------------------------- */
-#if defined(CONFIG_DASA_SIM)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "pci9054", 7, 3, 1, do_pci9054, \
- "pci9054 - PLX PCI9054 EEPROM access\n", \
- "pci9054 info - print EEPROM values\n" \
- "pci9054 update - updates EEPROM with default values\n" \
-),
-int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_DASA_SIM */
-/* -------------------------------------------------------------------- */
-
-/* ----- HYMOD -------------------------------------------------------- */
-#if defined(CONFIG_HYMOD)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "fpga", 4, 6, 1, do_fpga, \
- "fpga - FPGA sub-system\n", \
- "load [type] addr size\n" \
- " - write the configuration data at memory address `addr',\n" \
- " size `size' bytes, into the FPGA of type `type' (either\n" \
- " `main' or `mezz', default `main'). e.g.\n" \
- " `fpga load 100000 7d8f'\n" \
- " loads the main FPGA with config data at address 100000\n" \
- " HEX, size 7d8f HEX (32143 DEC) bytes\n" \
- "fpga tftp file addr\n" \
- " - transfers `file' from the tftp server into memory at\n" \
- " address `addr', then writes the entire file contents\n" \
- " into the main FPGA\n" \
- "fpga store addr\n" \
- " - read configuration data from the main FPGA (the mezz\n" \
- " FPGA is write-only), into address `addr'. There must be\n" \
- " enough memory available at `addr' to hold all the config\n"\
- " data - the size of which is determined by VC:???\n" \
- "fpga info\n" \
- " - print information about the Hymod FPGA, namely the\n" \
- " memory addresses at which the four FPGA local bus\n" \
- " address spaces appear in the physical address space\n" \
-), MK_CMD_TBL_ENTRY( \
- "eeclear", 4, 1, 0, do_eecl, \
- "eeclear - Clear the eeprom on a Hymod board\n", \
- "[type]\n" \
- " - write zeroes into the EEPROM on the board of type `type'\n"\
- " (`type' is either `main' or `mezz' - default `main')\n" \
- " Note: the EEPROM write enable jumper must be installed\n" \
-), MK_CMD_TBL_ENTRY( \
- "htest", 5, 1, 0, do_htest, \
- "htest - run HYMOD tests\n", \
- NULL \
-),
-
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_htest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_HYMOD */
-/* -------------------------------------------------------------------- */
-
-/* ----- CRAY405 (L1) ------------------------------------------------- */
-#if defined (CONFIG_CRAYL1)
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "L1cmd", 5, 4, 1, do_crayL1, \
- "L1cmd - L1 update, setup, commands \n", \
- "L1cmd update - update flash images from host\n" \
- "L1cmd boot - nfs or ramboot L1\n" \
-),
-int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-#endif /* CONFIG_CRAY405 */
-/* -------------------------------------------------------------------- */
-
-/* ----- EVB64260 ----------------------------------------------------- */
-#if defined (CONFIG_EVB64260)
-#ifdef CONFIG_ZUMA_V2
-#define CMD_TBL_BSP ZUMA_TBL_ENTRY
-
-#define ZUMA_TBL_ENTRY MK_CMD_TBL_ENTRY( \
- "zinit", 5, 1, 0, do_zuma_init_pbb, \
- "zinit - init zuma pbb\n", \
- "\n" \
- " - init zuma pbb\n" \
-), MK_CMD_TBL_ENTRY( \
- "zdtest", 6, 3, 1, do_zuma_test_dma, \
- "zdtest - run dma test\n", \
- "[cmd [count]]\n" \
- " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \
-), MK_CMD_TBL_ENTRY( \
- "zminit", 5, 1, 0, do_zuma_init_mbox, \
- "zminit - init zuma mbox\n", \
- "\n" \
- " - init zuma mbox\n" \
-),
-
-int do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-void zuma_init_pbb(void);
-int zuma_mbox_init(void);
-int zuma_test_dma(int cmd, int size);
-#else
-#define CMD_TBL_BSP
-#endif /* ZUMA_NTL */
-
-#endif /* CONFIG_EVB64260 */
-/* -------------------------------------------------------------------- */
-
-/* -----W7O------------------------------------------------------------ */
-#if defined(CONFIG_W7O)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "vpd", 3, 2, 1, do_vpd, \
- "vpd - Read Vital Product Data\n", \
- "[dev_addr]\n" \
- " - Read VPD Data from default address, or device address 'dev_addr'.\n" \
-),
-
-extern int do_vpd (cmd_tbl_t *, int, int, char *[]);
-
-#endif /* CONFIG_W7O */
-/* -------------------------------------------------------------------- */
-
-/* ---- PCIPPC2 / PCIPPC6 --------------------------------------------- */
-#if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6)
-#if defined(CONFIG_WATCHDOG)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "wd", 3, 2, 1, do_wd, \
- "wd - check and set watchdog\n", \
- "on - switch watchDog on\n" \
- "wd off - switch watchdog off\n" \
- "wd - print current status\n" \
-),
-
-extern int do_wd (cmd_tbl_t *, int, int, char *[]);
-
-#else
-#define CMD_TBL_BSP
-#endif /* CONFIG_WATCHDOG */
-
-#endif /* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */
-/* -------------------------------------------------------------------- */
-
-/* ----- PN62 --------------------------------------------------------- */
-#if defined(CONFIG_PN62)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "loadpci", 5, 2, 1, do_loadpci, \
- "loadpci - load binary file over PCI\n", \
- "[addr]\n" \
- " - load binary file over PCI to address 'addr'\n" \
-), MK_CMD_TBL_ENTRY( \
- "led" , 3, 3, 1, do_led, \
- "led - set LED 0..11 on the PN62 board\n", \
- "i fun\n" \
- " - set 'i'th LED to function 'fun'\n" \
-),
-
-extern int do_loadpci (cmd_tbl_t *, int, int, char *[]);
-extern int do_led (cmd_tbl_t *, int, int, char *[]);
-#endif /* CONFIG_PN62 */
-/* -------------------------------------------------------------------- */
-
-/* ----- TRAB --------------------------------------------------------- */
-#if defined(CONFIG_TRAB)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "kbd", 3, 1, 1, do_kbd, \
- "kbd - read keyboard status\n", \
- NULL \
-),
-
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_TRAB */
-/* -------------------------------------------------------------------- */
-
-/* ----- R360MPI ------------------------------------------------------ */
-#if defined(CONFIG_R360MPI)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "kbd", 3, 1, 1, do_kbd, \
- "kbd - read keyboard status\n", \
- NULL \
-),
-
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_R360MPI */
-/* -------------------------------------------------------------------- */
-
-/* ------ AMIGAONEG3SE ------------------------------------------------ */
-#if defined(CONFIG_AMIGAONEG3SE)
-
-#define CMD_TBL_BSP /* dummy */
-
-#endif /* AmigaOneG3SE */
-/* ----- PCI405 ------------------------------------------------------- */
-#if defined(CONFIG_PCI405)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
- "loadpci", 7, 1, 1, do_loadpci, \
- "loadpci - wait for sync and boot image\n", \
- NULL \
-),
-
-int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_PCI405 */
-/* -------------------------------------------------------------------- */
-
-#else
-#define CMD_TBL_BSP
-#endif /* CFG_CMD_BSP */
+/* do not edit this file */
#endif /* _CMD_BSP_H_ */