diff options
Diffstat (limited to 'include/asm-ppc')
| -rw-r--r-- | include/asm-ppc/immap_512x.h | 324 |
1 files changed, 323 insertions, 1 deletions
diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h index bd40c04..444e028 100644 --- a/include/asm-ppc/immap_512x.h +++ b/include/asm-ppc/immap_512x.h @@ -25,7 +25,28 @@ #define __IMMAP_512x__ #include <asm/types.h> +#if defined(CONFIG_E300) +#include <asm/e300.h> +#endif +/* + * System reset offset (PowerPC standard) + */ +#define EXC_OFF_SYS_RESET 0x0100 +#define _START_OFFSET EXC_OFF_SYS_RESET + +#define SPR_5121E 0x80180000 + +/* + * IMMRBAR - Internal Memory Register Base Address + */ +#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */ +#define IMMRBAR 0x0000 /* Register offset to immr */ +#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */ +#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) + + +#ifndef __ASSEMBLY__ typedef struct law512x { u32 bar; /* Base Addr Register */ u32 ar; /* Attributes Register */ @@ -60,6 +81,8 @@ typedef struct sysconf512x { u8 res5[0xf8]; } sysconf512x_t; +#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */ + /* * Watch Dog Timer (WDT) Registers */ @@ -124,6 +147,34 @@ typedef struct reset512x { u8 res1[0xDC]; } reset512x_t; +/* RSR - Reset Status Register */ +#define RSR_SWSR 0x00002000 /* software soft reset */ +#define RSR_SWHR 0x00001000 /* software hard reset */ +#define RSR_JHRS 0x00000200 /* jtag hreset */ +#define RSR_JSRS 0x00000100 /* jtag sreset status */ +#define RSR_CSHR 0x00000010 /* checkstop reset status */ +#define RSR_SWRS 0x00000008 /* software watchdog reset status */ +#define RSR_BMRS 0x00000004 /* bus monitop reset status */ +#define RSR_SRS 0x00000002 /* soft reset status */ +#define RSR_HRS 0x00000001 /* hard reset status */ +#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\ + RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\ + RSR_BMRS | RSR_SRS | RSR_HRS) + +/* RMR - Reset Mode Register */ +#define RMR_CSRE 0x00000001 /* checkstop reset enable */ +#define RMR_CSRE_SHIFT 0 +#define RMR_RES (~(RMR_CSRE)) + +/* RCR - Reset Control Register */ +#define RCR_SWHR 0x00000002 /* software hard reset */ +#define RCR_SWSR 0x00000001 /* software soft reset */ +#define RCR_RES (~(RCR_SWHR | RCR_SWSR)) + +/* RCER - Reset Control Enable Register */ +#define RCER_CRE 0x00000001 /* software hard reset */ +#define RCER_RES (~(RCER_CRE)) + /* * Clock Module */ @@ -140,6 +191,56 @@ typedef struct clk512x { u8 res1[0xa8]; } clk512x_t; +/* SPMR - System PLL Mode Register */ +#define SPMR_SPMF 0x0F000000 +#define SPMR_SPMF_SHIFT 24 +#define SPMR_CPMF 0x000F0000 +#define SPMR_CPMF_SHIFT 16 + +/* System Clock Control Register 1 commands */ +#define CLOCK_SCCR1_CFG_EN 0x80000000 +#define CLOCK_SCCR1_LPC_EN 0x40000000 +#define CLOCK_SCCR1_NFC_EN 0x20000000 +#define CLOCK_SCCR1_PATA_EN 0x10000000 +#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn)) +#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000 +#define CLOCK_SCCR1_SATA_EN 0x00004000 +#define CLOCK_SCCR1_FEC_EN 0x00002000 +#define CLOCK_SCCR1_TPR_EN 0x00001000 +#define CLOCK_SCCR1_PCI_EN 0x00000800 +#define CLOCK_SCCR1_DDR_EN 0x00000400 + +/* System Clock Control Register 2 commands */ +#define CLOCK_SCCR2_DIU_EN 0x80000000 +#define CLOCK_SCCR2_AXE_EN 0x40000000 +#define CLOCK_SCCR2_MEM_EN 0x20000000 +#define CLOCK_SCCR2_USB2_EN 0x10000000 +#define CLOCK_SCCR2_USB1_EN 0x08000000 +#define CLOCK_SCCR2_I2C_EN 0x04000000 +#define CLOCK_SCCR2_BDLC_EN 0x02000000 +#define CLOCK_SCCR2_SDHC_EN 0x01000000 +#define CLOCK_SCCR2_SPDIF_EN 0x00800000 +#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000 +#define CLOCK_SCCR2_MBX_EN 0x00200000 +#define CLOCK_SCCR2_MBX_3D_EN 0x00100000 +#define CLOCK_SCCR2_IIM_EN 0x00080000 + +/* SCFR1 System Clock Frequency Register 1 */ +#define SCFR1_IPS_DIV 0x3 +#define SCFR1_IPS_DIV_MASK 0x03800000 +#define SCFR1_IPS_DIV_SHIFT 23 + +#define SCFR1_PCI_DIV 0x6 +#define SCFR1_PCI_DIV_MASK 0x00700000 +#define SCFR1_PCI_DIV_SHIFT 20 + +/* SCFR2 System Clock Frequency Register 2 */ +#define SCFR2_SYS_DIV 0xFC000000 +#define SCFR2_SYS_DIV_SHIFT 26 + +/* SPCR - System Priority Configuration Register */ +#define SPCR_TBEN 0x00400000 /* E300 core time base unit enable */ + /* * Power Management Control Module */ @@ -266,6 +367,40 @@ typedef struct pci_outbound_window { u8 res2[4]; } pot512x_t; +/* POTAR - PCI Outbound Translation Address Register */ +#define POTAR_TA_MASK 0x000fffff + +/* POBAR - PCI Outbound Base Address Register */ +#define POBAR_BA_MASK 0x000fffff + +/* POCMR - PCI Outbound Comparision Mask Register */ +#define POCMR_EN 0x80000000 +#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */ +#define POCMR_PRE 0x20000000 /* prefetch enable */ +#define POCMR_SBS 0x00100000 /* special byte swap enable */ +#define POCMR_CM_MASK 0x000fffff +#define POCMR_CM_4G 0x00000000 +#define POCMR_CM_2G 0x00080000 +#define POCMR_CM_1G 0x000C0000 +#define POCMR_CM_512M 0x000E0000 +#define POCMR_CM_256M 0x000F0000 +#define POCMR_CM_128M 0x000F8000 +#define POCMR_CM_64M 0x000FC000 +#define POCMR_CM_32M 0x000FE000 +#define POCMR_CM_16M 0x000FF000 +#define POCMR_CM_8M 0x000FF800 +#define POCMR_CM_4M 0x000FFC00 +#define POCMR_CM_2M 0x000FFE00 +#define POCMR_CM_1M 0x000FFF00 +#define POCMR_CM_512K 0x000FFF80 +#define POCMR_CM_256K 0x000FFFC0 +#define POCMR_CM_128K 0x000FFFE0 +#define POCMR_CM_64K 0x000FFFF0 +#define POCMR_CM_32K 0x000FFFF8 +#define POCMR_CM_16K 0x000FFFFC +#define POCMR_CM_8K 0x000FFFFE +#define POCMR_CM_4K 0x000FFFFF + /* * Sequencer */ @@ -315,6 +450,27 @@ typedef struct pcictrl512x { } pcictrl512x_t; +/* PITAR - PCI Inbound Translation Address Register + */ +#define PITAR_TA_MASK 0x000fffff + +/* PIBAR - PCI Inbound Base/Extended Address Register + */ +#define PIBAR_MASK 0xffffffff +#define PIEBAR_EBA_MASK 0x000fffff + +/* PIWAR - PCI Inbound Windows Attributes Register + */ +#define PIWAR_EN 0x80000000 +#define PIWAR_SBS 0x40000000 +#define PIWAR_PF 0x20000000 +#define PIWAR_RTT_MASK 0x000f0000 +#define PIWAR_RTT_NO_SNOOP 0x00040000 +#define PIWAR_RTT_SNOOP 0x00050000 +#define PIWAR_WTT_MASK 0x0000f000 +#define PIWAR_WTT_NO_SNOOP 0x00004000 +#define PIWAR_WTT_SNOOP 0x00005000 + /* * MSCAN */ @@ -355,13 +511,34 @@ typedef struct i2c512x_dev { u8 res0[0x0C]; } i2c512x_dev_t; +/* Number of I2C buses */ +#define I2C_BUS_CNT 3 + typedef struct i2c512x { - i2c512x_dev_t dev[3]; + i2c512x_dev_t dev[I2C_BUS_CNT]; volatile u32 icr; volatile u32 mifr; u8 res0[0x98]; } i2c512x_t; +/* I2Cn control register bits */ +#define I2C_EN 0x80 +#define I2C_IEN 0x40 +#define I2C_STA 0x20 +#define I2C_TX 0x10 +#define I2C_TXAK 0x08 +#define I2C_RSTA 0x04 +#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA) + +/* I2Cn status register bits */ +#define I2C_CF 0x80 +#define I2C_AAS 0x40 +#define I2C_BB 0x20 +#define I2C_AL 0x10 +#define I2C_SRW 0x04 +#define I2C_IF 0x02 +#define I2C_RXAK 0x01 + /* * AXE */ @@ -653,6 +830,27 @@ typedef struct ioctrl512x { u8 reserved[0x0cfc]; /* fill to 4096 bytes size */ } ioctrl512x_t; +/* Indexes in regs array */ +/* Set for DDR */ +#define IOCTRL_MUX_DDR 0x00000036 + +/* IO pin fields */ +#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */ +#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */ +#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */ +#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */ +#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */ +#define IO_PIN_DS(v) ((v)) /* slew rate */ + +typedef struct iopin_t { + int p_offset; /* offset from IOCTL_MEM_OFFSET */ + int nr_pins; /* number of pins to set this way */ + int bit_or; /* or in the value instead of overwrite */ + u_long val; /* value to write or or */ +}iopin_t; + +void iopin_initialize(iopin_t *,int); + /* * IIM */ @@ -834,6 +1032,51 @@ typedef struct psc512x { #define rfdata_32 rfdata_buffer.buffer_32 } psc512x_t; +/* PSC FIFO Command values */ +#define PSC_FIFO_RESET_SLICE 0x80 +#define PSC_FIFO_ENABLE_SLICE 0x01 + +/* PSC FIFO Controller Command values */ +#define FIFOC_ENABLE_CLOCK_GATE 0x01 +#define FIFOC_DISABLE_CLOCK_GATE 0x00 + +/* PSC FIFO status */ +#define PSC_FIFO_EMPTY 0x01 + +/* PSC Command values */ +#define PSC_RX_ENABLE 0x01 +#define PSC_RX_DISABLE 0x02 +#define PSC_TX_ENABLE 0x04 +#define PSC_TX_DISABLE 0x08 +#define PSC_SEL_MODE_REG_1 0x10 +#define PSC_RST_RX 0x20 +#define PSC_RST_TX 0x30 +#define PSC_RST_ERR_STAT 0x40 +#define PSC_RST_BRK_CHG_INT 0x50 +#define PSC_START_BRK 0x60 +#define PSC_STOP_BRK 0x70 + +/* PSC status register bits */ +#define PSC_SR_CDE 0x0080 +#define PSC_SR_TXEMP 0x0800 +#define PSC_SR_OE 0x1000 +#define PSC_SR_PE 0x2000 +#define PSC_SR_FE 0x4000 +#define PSC_SR_RB 0x8000 + +/* PSC mode fields */ +#define PSC_MODE_5_BITS 0x00 +#define PSC_MODE_6_BITS 0x01 +#define PSC_MODE_7_BITS 0x02 +#define PSC_MODE_8_BITS 0x03 +#define PSC_MODE_PAREVEN 0x00 +#define PSC_MODE_PARODD 0x04 +#define PSC_MODE_PARFORCE 0x08 +#define PSC_MODE_PARNONE 0x10 +#define PSC_MODE_ENTIMEOUT 0x20 +#define PSC_MODE_RXRTS 0x80 +#define PSC_MODE_1_STOPBIT 0x07 + /* * FIFOC */ @@ -847,6 +1090,76 @@ typedef struct fifoc512x { } fifoc512x_t; /* + * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs + * + * NOTE: individual PSC units are free to use whatever area (and size) of the + * FIFOC internal memory, so make sure memory areas for FIFO slices used by + * different PSCs do not overlap! + * + * Overall size of FIFOC memory is not documented in the MPC5121e RM, but + * tests indicate that it is 1024 words total. + */ +#define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */ +#define FIFOC_PSC0_TX_ADDR 0x0 +#define FIFOC_PSC0_RX_SIZE 0x0 +#define FIFOC_PSC0_RX_ADDR 0x0 + +#define FIFOC_PSC1_TX_SIZE 0x0 +#define FIFOC_PSC1_TX_ADDR 0x0 +#define FIFOC_PSC1_RX_SIZE 0x0 +#define FIFOC_PSC1_RX_ADDR 0x0 + +#define FIFOC_PSC2_TX_SIZE 0x0 +#define FIFOC_PSC2_TX_ADDR 0x0 +#define FIFOC_PSC2_RX_SIZE 0x0 +#define FIFOC_PSC2_RX_ADDR 0x0 + +#define FIFOC_PSC3_TX_SIZE 0x04 +#define FIFOC_PSC3_TX_ADDR 0x0 +#define FIFOC_PSC3_RX_SIZE 0x04 +#define FIFOC_PSC3_RX_ADDR 0x10 + +#define FIFOC_PSC4_TX_SIZE 0x0 +#define FIFOC_PSC4_TX_ADDR 0x0 +#define FIFOC_PSC4_RX_SIZE 0x0 +#define FIFOC_PSC4_RX_ADDR 0x0 + +#define FIFOC_PSC5_TX_SIZE 0x0 +#define FIFOC_PSC5_TX_ADDR 0x0 +#define FIFOC_PSC5_RX_SIZE 0x0 +#define FIFOC_PSC5_RX_ADDR 0x0 + +#define FIFOC_PSC6_TX_SIZE 0x0 +#define FIFOC_PSC6_TX_ADDR 0x0 +#define FIFOC_PSC6_RX_SIZE 0x0 +#define FIFOC_PSC6_RX_ADDR 0x0 + +#define FIFOC_PSC7_TX_SIZE 0x0 +#define FIFOC_PSC7_TX_ADDR 0x0 +#define FIFOC_PSC7_RX_SIZE 0x0 +#define FIFOC_PSC7_RX_ADDR 0x0 + +#define FIFOC_PSC8_TX_SIZE 0x0 +#define FIFOC_PSC8_TX_ADDR 0x0 +#define FIFOC_PSC8_RX_SIZE 0x0 +#define FIFOC_PSC8_RX_ADDR 0x0 + +#define FIFOC_PSC9_TX_SIZE 0x0 +#define FIFOC_PSC9_TX_ADDR 0x0 +#define FIFOC_PSC9_RX_SIZE 0x0 +#define FIFOC_PSC9_RX_ADDR 0x0 + +#define FIFOC_PSC10_TX_SIZE 0x0 +#define FIFOC_PSC10_TX_ADDR 0x0 +#define FIFOC_PSC10_RX_SIZE 0x0 +#define FIFOC_PSC10_RX_ADDR 0x0 + +#define FIFOC_PSC11_TX_SIZE 0x0 +#define FIFOC_PSC11_TX_ADDR 0x0 +#define FIFOC_PSC11_RX_SIZE 0x0 +#define FIFOC_PSC11_RX_ADDR 0x0 + +/* * SATA */ typedef struct sata512x { @@ -903,4 +1216,13 @@ typedef struct immap { sata512x_t sata; /* Serial ATA */ u8 res13[0xde000]; } immap_t; + +/* provide interface to get PATA base address */ +static inline u32 get_pata_base (void) +{ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + return (u32)(&im->pata); +} +#endif /* __ASSEMBLY__ */ + #endif /* __IMMAP_512x__ */ |