diff options
Diffstat (limited to 'include/asm-ppc/ppc4xx-sdram.h')
| -rw-r--r-- | include/asm-ppc/ppc4xx-sdram.h | 86 |
1 files changed, 35 insertions, 51 deletions
diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h index 992a3d2..b6182d4 100644 --- a/include/asm-ppc/ppc4xx-sdram.h +++ b/include/asm-ppc/ppc4xx-sdram.h @@ -30,32 +30,27 @@ * SDRAM Controller */ -/* - * XXX - ToDo: Revisit file to change all these lower case defines into - * upper case. Also needs to be done in the controller setup code too - * of course. sr, 2008-06-02 - */ #ifndef CONFIG_405EP -#define mem_besra 0x00 /* bus error syndrome reg a */ -#define mem_besrsa 0x04 /* bus error syndrome reg set a */ -#define mem_besrb 0x08 /* bus error syndrome reg b */ -#define mem_besrsb 0x0c /* bus error syndrome reg set b */ -#define mem_bear 0x10 /* bus error address reg */ +#define SDRAM0_BESR0 0x00 /* bus error syndrome reg a */ +#define SDRAM0_BESRS0 0x04 /* bus error syndrome reg set a */ +#define SDRAM0_BESR1 0x08 /* bus error syndrome reg b */ +#define SDRAM0_BESRS1 0x0c /* bus error syndrome reg set b */ +#define SDRAM0_BEAR 0x10 /* bus error address reg */ #endif -#define mem_mcopt1 0x20 /* memory controller options 1 */ -#define mem_status 0x24 /* memory status */ -#define mem_rtr 0x30 /* refresh timer reg */ -#define mem_pmit 0x34 /* power management idle timer */ -#define mem_mb0cf 0x40 /* memory bank 0 configuration */ -#define mem_mb1cf 0x44 /* memory bank 1 configuration */ +#define SDRAM0_CFG 0x20 /* memory controller options 1 */ +#define SDRAM0_STATUS 0x24 /* memory status */ +#define SDRAM0_RTR 0x30 /* refresh timer reg */ +#define SDRAM0_PMIT 0x34 /* power management idle timer */ +#define SDRAM0_B0CR 0x40 /* memory bank 0 configuration */ +#define SDRAM0_B1CR 0x44 /* memory bank 1 configuration */ #ifndef CONFIG_405EP -#define mem_mb2cf 0x48 /* memory bank 2 configuration */ -#define mem_mb3cf 0x4c /* memory bank 3 configuration */ +#define SDRAM0_B2CR 0x48 /* memory bank 2 configuration */ +#define SDRAM0_B3CR 0x4c /* memory bank 3 configuration */ #endif -#define mem_sdtr1 0x80 /* timing reg 1 */ +#define SDRAM0_TR 0x80 /* timing reg 1 */ #ifndef CONFIG_405EP -#define mem_ecccf 0x94 /* ECC configuration */ -#define mem_eccerr 0x98 /* ECC error status */ +#define SDRAM0_ECCCFG 0x94 /* ECC configuration */ +#define SDRAM0_ECCESR 0x98 /* ECC error status */ #endif #endif /* CONFIG_SDRAM_PPC4xx_IBM_SDRAM */ @@ -68,36 +63,25 @@ #define SDRAM_CFG0 0x20 /* memory controller options 0 */ #define SDRAM_CFG1 0x21 /* memory controller options 1 */ -/* - * XXX - ToDo: Revisit file to change all these lower case defines into - * upper case. Also needs to be done in the controller setup code too - * of course. sr, 2008-06-02 - */ -#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */ -#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */ -#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */ -#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */ -#define mem_bear 0x0010 /* bus error address reg */ -#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */ -#define mem_mirq_set 0x0012 /* bus master interrupt (set) */ -#define mem_slio 0x0018 /* ddr sdram slave interface options */ -#define mem_cfg0 0x0020 /* ddr sdram options 0 */ -#define mem_cfg1 0x0021 /* ddr sdram options 1 */ -#define mem_devopt 0x0022 /* ddr sdram device options */ -#define mem_mcsts 0x0024 /* memory controller status */ -#define mem_rtr 0x0030 /* refresh timer register */ -#define mem_pmit 0x0034 /* power management idle timer */ -#define mem_uabba 0x0038 /* plb UABus base address */ -#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */ -#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */ -#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */ -#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */ -#define mem_tr0 0x0080 /* sdram timing register 0 */ -#define mem_tr1 0x0081 /* sdram timing register 1 */ -#define mem_clktr 0x0082 /* ddr clock timing register */ -#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */ -#define mem_dlycal 0x0084 /* delay line calibration register */ -#define mem_eccesr 0x0098 /* ECC error status */ +#define SDRAM0_BEAR 0x0010 /* bus error address reg */ +#define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */ +#define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */ +#define SDRAM0_CFG1 0x0021 /* ddr sdram options 1 */ +#define SDRAM0_DEVOPT 0x0022 /* ddr sdram device options */ +#define SDRAM0_MCSTS 0x0024 /* memory controller status */ +#define SDRAM0_RTR 0x0030 /* refresh timer register */ +#define SDRAM0_PMIT 0x0034 /* power management idle timer */ +#define SDRAM0_UABBA 0x0038 /* plb UABus base address */ +#define SDRAM0_B0CR 0x0040 /* ddr sdram bank 0 configuration */ +#define SDRAM0_B1CR 0x0044 /* ddr sdram bank 1 configuration */ +#define SDRAM0_B2CR 0x0048 /* ddr sdram bank 2 configuration */ +#define SDRAM0_B3CR 0x004c /* ddr sdram bank 3 configuration */ +#define SDRAM0_TR0 0x0080 /* sdram timing register 0 */ +#define SDRAM0_TR1 0x0081 /* sdram timing register 1 */ +#define SDRAM0_CLKTR 0x0082 /* ddr clock timing register */ +#define SDRAM0_WDDCTR 0x0083 /* write data/dm/dqs clock timing reg */ +#define SDRAM0_DLYCAL 0x0084 /* delay line calibration register */ +#define SDRAM0_ECCESR 0x0098 /* ECC error status */ /* * Memory Controller Options 0 |