summaryrefslogtreecommitdiff
path: root/include/asm-i386
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-i386')
-rw-r--r--include/asm-i386/bitops.h1
-rw-r--r--include/asm-i386/byteorder.h4
-rw-r--r--include/asm-i386/ic/sc520.h79
-rw-r--r--include/asm-i386/io.h2
-rw-r--r--include/asm-i386/pci.h6
-rw-r--r--include/asm-i386/realmode.h1
-rw-r--r--include/asm-i386/u-boot-i386.h11
-rw-r--r--include/asm-i386/u-boot.h3
8 files changed, 92 insertions, 15 deletions
diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h
index a3063ca..7d29335 100644
--- a/include/asm-i386/bitops.h
+++ b/include/asm-i386/bitops.h
@@ -5,7 +5,6 @@
* Copyright 1992, Linus Torvalds.
*/
-#include <linux/config.h>
/*
* These have to be done with inline assembly: that way the bit-setting
diff --git a/include/asm-i386/byteorder.h b/include/asm-i386/byteorder.h
index bbfb629..a9c69d5 100644
--- a/include/asm-i386/byteorder.h
+++ b/include/asm-i386/byteorder.h
@@ -5,10 +5,6 @@
#ifdef __GNUC__
-/* For avoiding bswap on i386 */
-#ifdef __KERNEL__
-#include <linux/config.h>
-#endif
static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
{
diff --git a/include/asm-i386/ic/sc520.h b/include/asm-i386/ic/sc520.h
index 9708504..1836f99 100644
--- a/include/asm-i386/ic/sc520.h
+++ b/include/asm-i386/ic/sc520.h
@@ -116,6 +116,11 @@
#define SC520_UART2CTL 0x0cc4 /* UART 2 General Control Register */
#define SC520_UART2STA 0x0cc5 /* UART 2 General Status Register */
#define SC520_UART2FCRSHAD 0x0cc6 /* UART 2 FIFO Control Shadow Register */
+#define SC520_SSICTL 0x0cd0 /* SSI Control */
+#define SC520_SSIXMIT 0x0cd1 /* SSI Transmit */
+#define SC520_SSICMD 0x0cd2 /* SSI Command */
+#define SC520_SSISTA 0x0cd3 /* SSI Status */
+#define SC520_SSIRCV 0x0cd4 /* SSI Receive */
#define SC520_PICICR 0x0d00 /* Interrupt Control Register */
#define SC520_MPICMODE 0x0d02 /* Master PIC Interrupt Mode Register */
#define SC520_SL1PICMODE 0x0d03 /* Slave 1 PIC Interrupt Mode Register */
@@ -195,9 +200,31 @@
/* MMCR Register bits (not all of them :) ) */
+/* SSI Stuff */
+#define CTL_CLK_SEL_4 0x00 /* Nominal Bit Rate = 8 MHz */
+#define CTL_CLK_SEL_8 0x10 /* Nominal Bit Rate = 4 MHz */
+#define CTL_CLK_SEL_16 0x20 /* Nominal Bit Rate = 2 MHz */
+#define CTL_CLK_SEL_32 0x30 /* Nominal Bit Rate = 1 MHz */
+#define CTL_CLK_SEL_64 0x40 /* Nominal Bit Rate = 512 KHz */
+#define CTL_CLK_SEL_128 0x50 /* Nominal Bit Rate = 256 KHz */
+#define CTL_CLK_SEL_256 0x60 /* Nominal Bit Rate = 128 KHz */
+#define CTL_CLK_SEL_512 0x70 /* Nominal Bit Rate = 64 KHz */
+
+#define TC_INT_ENB 0x08 /* Transaction Complete Interrupt Enable */
+#define PHS_INV_ENB 0x04 /* SSI Inverted Phase Mode Enable */
+#define CLK_INV_ENB 0x02 /* SSI Inverted Clock Mode Enable */
+#define MSBF_ENB 0x01 /* SSI Most Significant Bit First Mode Enable */
+
+#define SSICMD_CMD_SEL_XMITRCV 0x03 /* Simultaneous Transmit / Receive Transaction */
+#define SSICMD_CMD_SEL_RCV 0x02 /* Receive Transaction */
+#define SSICMD_CMD_SEL_XMIT 0x01 /* Transmit Transaction */
+#define SSISTA_BSY 0x02 /* SSI Busy */
+#define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */
+
+
/* BITS for SC520_ADDDECCTL: */
#define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */
-#define IO_HOLE_DEST 0x10 /* I/O Hole Access Destination */
+#define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */
#define RTC_DIS 0x04 /* RTC Disable */
#define UART2_DIS 0x02 /* UART2 Disable */
#define UART1_DIS 0x01 /* UART1 Disable */
@@ -215,25 +242,64 @@
#define SC520_ISA_IO_BUS 0x00000000
#define SC520_ISA_IO_SIZE 0x00001000
-/* PCI I/O space from 0x1000 to 0xfdff */
+/* PCI I/O space from 0x1000 to 0xdfff
+ * (make 0xe000-0xfdff available for stuff like PCCard boot) */
#define SC520_PCI_IO_PHYS 0x00001000
#define SC520_PCI_IO_BUS 0x00001000
-#define SC520_PCI_IO_SIZE 0x0000ee00
+#define SC520_PCI_IO_SIZE 0x0000d000
/* system memory from 0x00000000 to 0x0fffffff */
#define SC520_PCI_MEMORY_PHYS 0x00000000
#define SC520_PCI_MEMORY_BUS 0x00000000
#define SC520_PCI_MEMORY_SIZE 0x10000000
-/* PCI bus memory from 0x10000000 to 0x27ffffff */
+/* PCI bus memory from 0x10000000 to 0x26ffffff
+ * (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */
#define SC520_PCI_MEM_PHYS 0x10000000
#define SC520_PCI_MEM_BUS 0x10000000
-#define SC520_PCI_MEM_SIZE 0x18000000
+#define SC520_PCI_MEM_SIZE 0x17000000
/* 0x28000000 - 0x3fffffff is used by the flash banks */
/* 0x40000000 - 0xffffffff is not adressable by the SC520 */
+/* priority numbers used for interrupt channel mappings */
+#define SC520_IRQ_DISABLED 0
+#define SC520_IRQ0 1
+#define SC520_IRQ1 2
+#define SC520_IRQ2 4 /* same as IRQ9 */
+#define SC520_IRQ3 11
+#define SC520_IRQ4 12
+#define SC520_IRQ5 13
+#define SC520_IRQ6 21
+#define SC520_IRQ7 22
+#define SC520_IRQ8 3
+#define SC520_IRQ9 4
+#define SC520_IRQ10 5
+#define SC520_IRQ11 6
+#define SC520_IRQ12 7
+#define SC520_IRQ13 8
+#define SC520_IRQ14 9
+#define SC520_IRQ15 10
+
+
+/* pin number used for PCI interrupt mappings */
+#define SC520_PCI_INTA 0
+#define SC520_PCI_INTB 1
+#define SC520_PCI_INTC 2
+#define SC520_PCI_INTD 3
+#define SC520_PCI_GPIRQ0 4
+#define SC520_PCI_GPIRQ1 5
+#define SC520_PCI_GPIRQ2 6
+#define SC520_PCI_GPIRQ3 7
+#define SC520_PCI_GPIRQ4 8
+#define SC520_PCI_GPIRQ5 9
+#define SC520_PCI_GPIRQ6 10
+#define SC520_PCI_GPIRQ7 11
+#define SC520_PCI_GPIRQ8 12
+#define SC520_PCI_GPIRQ9 13
+#define SC520_PCI_GPIRQ10 14
+
/* utility functions */
void write_mmcr_byte(u16 mmcr, u8 data);
void write_mmcr_word(u16 mmcr, u16 data);
@@ -242,8 +308,11 @@ u8 read_mmcr_byte(u16 mmcr);
u16 read_mmcr_word(u16 mmcr);
u32 read_mmcr_long(u16 mmcr);
+extern int sc520_pci_ints[];
+
void init_sc520(void);
unsigned long init_sc520_dram(void);
void pci_sc520_init(struct pci_controller *hose);
+int pci_sc520_set_irq(int pci_pin, int irq);
#endif
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
index d8c503c..d17d45e 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-i386/io.h
@@ -1,8 +1,6 @@
#ifndef _ASM_IO_H
#define _ASM_IO_H
-#include <linux/config.h>
-
/*
* This file contains the definitions for the x86 IO instructions
* inb/inw/inl/outb/outw/outl and the "string versions" of the same
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
index 15c165b..3a91f57 100644
--- a/include/asm-i386/pci.h
+++ b/include/asm-i386/pci.h
@@ -27,5 +27,11 @@
#define _PCI_I386_H_ 1
void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
+int pci_enable_legacy_video_ports(struct pci_controller* hose);
+int pci_shadow_rom(pci_dev_t dev, unsigned char *dest);
+void pci_remove_rom_window(struct pci_controller* hose, u32 addr);
+u32 pci_get_rom_window(struct pci_controller* hose, int size);
+
+
#endif
diff --git a/include/asm-i386/realmode.h b/include/asm-i386/realmode.h
index fcb76c3..a84f128 100644
--- a/include/asm-i386/realmode.h
+++ b/include/asm-i386/realmode.h
@@ -27,5 +27,6 @@
int bios_setup(void);
int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out);
+int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out);
#endif
diff --git a/include/asm-i386/u-boot-i386.h b/include/asm-i386/u-boot-i386.h
index 6e5e059..12d10a7 100644
--- a/include/asm-i386/u-boot-i386.h
+++ b/include/asm-i386/u-boot-i386.h
@@ -46,8 +46,15 @@ int cpu_init(void);
int timer_init(void);
/* board/.../... */
-int board_init(void);
-int dram_init (void);
+int board_init(void);
+int dram_init(void);
+
+void isa_unmap_rom(u32 addr);
+u32 isa_map_rom(u32 bus_addr, int size);
+
+/* lib_i386/... */
+int video_bios_init(void);
+int video_init(void);
#endif /* _U_BOOT_I386_H_ */
diff --git a/include/asm-i386/u-boot.h b/include/asm-i386/u-boot.h
index 554bc85..dc5dd72 100644
--- a/include/asm-i386/u-boot.h
+++ b/include/asm-i386/u-boot.h
@@ -43,7 +43,8 @@ typedef struct bd_info {
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
- unsigned long bi_baudrate; /* Console Baudrate */
+ unsigned int bi_baudrate; /* Console Baudrate */
+ unsigned long bi_boot_params; /* where this board expects params */
struct environment_s *bi_env;
struct /* RAM configuration */
{