diff options
Diffstat (limited to 'include/asm-i386/bitops.h')
| -rw-r--r-- | include/asm-i386/bitops.h | 384 |
1 files changed, 0 insertions, 384 deletions
diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h deleted file mode 100644 index c7a38f2..0000000 --- a/include/asm-i386/bitops.h +++ /dev/null @@ -1,384 +0,0 @@ -#ifndef _I386_BITOPS_H -#define _I386_BITOPS_H - -/* - * Copyright 1992, Linus Torvalds. - */ - - -/* - * These have to be done with inline assembly: that way the bit-setting - * is guaranteed to be atomic. All bit operations return 0 if the bit - * was cleared before the operation and != 0 if it was not. - * - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ - -#ifdef CONFIG_SMP -#define LOCK_PREFIX "lock ; " -#else -#define LOCK_PREFIX "" -#endif - -#define ADDR (*(volatile long *) addr) - -/** - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. See __set_bit() - * if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static __inline__ void set_bit(int nr, volatile void * addr) -{ - __asm__ __volatile__( LOCK_PREFIX - "btsl %1,%0" - :"=m" (ADDR) - :"Ir" (nr)); -} - -/** - * __set_bit - Set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * Unlike set_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static __inline__ void __set_bit(int nr, volatile void * addr) -{ - __asm__( - "btsl %1,%0" - :"=m" (ADDR) - :"Ir" (nr)); -} - -/** - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. However, it does - * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() - * in order to ensure changes are visible on other processors. - */ -static __inline__ void clear_bit(int nr, volatile void * addr) -{ - __asm__ __volatile__( LOCK_PREFIX - "btrl %1,%0" - :"=m" (ADDR) - :"Ir" (nr)); -} -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -/** - * __change_bit - Toggle a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * Unlike change_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static __inline__ void __change_bit(int nr, volatile void * addr) -{ - __asm__ __volatile__( - "btcl %1,%0" - :"=m" (ADDR) - :"Ir" (nr)); -} - -/** - * change_bit - Toggle a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static __inline__ void change_bit(int nr, volatile void * addr) -{ - __asm__ __volatile__( LOCK_PREFIX - "btcl %1,%0" - :"=m" (ADDR) - :"Ir" (nr)); -} - -/** - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static __inline__ int test_and_set_bit(int nr, volatile void * addr) -{ - int oldbit; - - __asm__ __volatile__( LOCK_PREFIX - "btsl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"=m" (ADDR) - :"Ir" (nr) : "memory"); - return oldbit; -} - -/** - * __test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is non-atomic and can be reordered. - * If two examples of this operation race, one can appear to succeed - * but actually fail. You must protect multiple accesses with a lock. - */ -static __inline__ int __test_and_set_bit(int nr, volatile void * addr) -{ - int oldbit; - - __asm__( - "btsl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"=m" (ADDR) - :"Ir" (nr)); - return oldbit; -} - -/** - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static __inline__ int test_and_clear_bit(int nr, volatile void * addr) -{ - int oldbit; - - __asm__ __volatile__( LOCK_PREFIX - "btrl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"=m" (ADDR) - :"Ir" (nr) : "memory"); - return oldbit; -} - -/** - * __test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is non-atomic and can be reordered. - * If two examples of this operation race, one can appear to succeed - * but actually fail. You must protect multiple accesses with a lock. - */ -static __inline__ int __test_and_clear_bit(int nr, volatile void * addr) -{ - int oldbit; - - __asm__( - "btrl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"=m" (ADDR) - :"Ir" (nr)); - return oldbit; -} - -/* WARNING: non atomic and it can be reordered! */ -static __inline__ int __test_and_change_bit(int nr, volatile void * addr) -{ - int oldbit; - - __asm__ __volatile__( - "btcl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"=m" (ADDR) - :"Ir" (nr) : "memory"); - return oldbit; -} - -/** - * test_and_change_bit - Change a bit and return its new value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static __inline__ int test_and_change_bit(int nr, volatile void * addr) -{ - int oldbit; - - __asm__ __volatile__( LOCK_PREFIX - "btcl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit),"=m" (ADDR) - :"Ir" (nr) : "memory"); - return oldbit; -} - -#if 0 /* Fool kernel-doc since it doesn't do macros yet */ -/** - * test_bit - Determine whether a bit is set - * @nr: bit number to test - * @addr: Address to start counting from - */ -static int test_bit(int nr, const volatile void * addr); -#endif - -static __inline__ int constant_test_bit(int nr, const volatile void * addr) -{ - return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; -} - -static __inline__ int variable_test_bit(int nr, volatile void * addr) -{ - int oldbit; - - __asm__ __volatile__( - "btl %2,%1\n\tsbbl %0,%0" - :"=r" (oldbit) - :"m" (ADDR),"Ir" (nr)); - return oldbit; -} - -#define test_bit(nr,addr) \ -(__builtin_constant_p(nr) ? \ - constant_test_bit((nr),(addr)) : \ - variable_test_bit((nr),(addr))) - -/** - * find_first_zero_bit - find the first zero bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first zero bit, not the number of the byte - * containing a bit. - */ -static __inline__ int find_first_zero_bit(void * addr, unsigned size) -{ - int d0, d1, d2; - int res; - - if (!size) - return 0; - /* This looks at memory. Mark it volatile to tell gcc not to move it around */ - __asm__ __volatile__( - "movl $-1,%%eax\n\t" - "xorl %%edx,%%edx\n\t" - "repe; scasl\n\t" - "je 1f\n\t" - "xorl -4(%%edi),%%eax\n\t" - "subl $4,%%edi\n\t" - "bsfl %%eax,%%edx\n" - "1:\tsubl %%ebx,%%edi\n\t" - "shll $3,%%edi\n\t" - "addl %%edi,%%edx" - :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2) - :"1" ((size + 31) >> 5), "2" (addr), "b" (addr)); - return res; -} - -/** - * find_next_zero_bit - find the first zero bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -static __inline__ int find_next_zero_bit (void * addr, int size, int offset) -{ - unsigned long * p = ((unsigned long *) addr) + (offset >> 5); - int set = 0, bit = offset & 31, res; - - if (bit) { - /* - * Look for zero in first byte - */ - __asm__("bsfl %1,%0\n\t" - "jne 1f\n\t" - "movl $32, %0\n" - "1:" - : "=r" (set) - : "r" (~(*p >> bit))); - if (set < (32 - bit)) - return set + offset; - set = 32 - bit; - p++; - } - /* - * No zero yet, search remaining full bytes for a zero - */ - res = find_first_zero_bit (p, size - 32 * (p - (unsigned long *) addr)); - return (offset + set + res); -} - -/** - * ffz - find first zero in word. - * @word: The word to search - * - * Undefined if no zero exists, so code should check against ~0UL first. - */ -static __inline__ unsigned long ffz(unsigned long word) -{ - __asm__("bsfl %1,%0" - :"=r" (word) - :"r" (~word)); - return word; -} - -#ifdef __KERNEL__ - -/** - * ffs - find first bit set - * @x: the word to search - * - * This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static __inline__ int ffs(int x) -{ - int r; - - __asm__("bsfl %1,%0\n\t" - "jnz 1f\n\t" - "movl $-1,%0\n" - "1:" : "=r" (r) : "g" (x)); - return r+1; -} -#define PLATFORM_FFS - -/** - * hweightN - returns the hamming weight of a N-bit word - * @x: the word to weigh - * - * The Hamming Weight of a number is the total number of bits set in it. - */ - -#define hweight32(x) generic_hweight32(x) -#define hweight16(x) generic_hweight16(x) -#define hweight8(x) generic_hweight8(x) - -#endif /* __KERNEL__ */ - -#ifdef __KERNEL__ - -#define ext2_set_bit __test_and_set_bit -#define ext2_clear_bit __test_and_clear_bit -#define ext2_test_bit test_bit -#define ext2_find_first_zero_bit find_first_zero_bit -#define ext2_find_next_zero_bit find_next_zero_bit - -/* Bitmap functions for the minix filesystem. */ -#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,addr) -#define minix_set_bit(nr,addr) __set_bit(nr,addr) -#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,addr) -#define minix_test_bit(nr,addr) test_bit(nr,addr) -#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size) - -#endif /* __KERNEL__ */ - -#endif /* _I386_BITOPS_H */ |