summaryrefslogtreecommitdiff
path: root/include/asm-blackfin/mach-common/bits
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-blackfin/mach-common/bits')
-rw-r--r--include/asm-blackfin/mach-common/bits/bootrom.h218
-rw-r--r--include/asm-blackfin/mach-common/bits/core.h109
-rw-r--r--include/asm-blackfin/mach-common/bits/dma.h58
-rw-r--r--include/asm-blackfin/mach-common/bits/ebiu.h421
-rw-r--r--include/asm-blackfin/mach-common/bits/emac.h220
-rw-r--r--include/asm-blackfin/mach-common/bits/eppi.h70
-rw-r--r--include/asm-blackfin/mach-common/bits/lockbox.h62
-rw-r--r--include/asm-blackfin/mach-common/bits/mpu.h116
-rw-r--r--include/asm-blackfin/mach-common/bits/otp.h72
-rw-r--r--include/asm-blackfin/mach-common/bits/pll.h96
-rw-r--r--include/asm-blackfin/mach-common/bits/ppi.h38
-rw-r--r--include/asm-blackfin/mach-common/bits/rtc.h42
-rw-r--r--include/asm-blackfin/mach-common/bits/spi.h67
-rw-r--r--include/asm-blackfin/mach-common/bits/sport.h89
-rw-r--r--include/asm-blackfin/mach-common/bits/timer.h78
-rw-r--r--include/asm-blackfin/mach-common/bits/trace.h19
-rw-r--r--include/asm-blackfin/mach-common/bits/twi.h77
-rw-r--r--include/asm-blackfin/mach-common/bits/uart.h98
-rw-r--r--include/asm-blackfin/mach-common/bits/watchdog.h19
19 files changed, 1969 insertions, 0 deletions
diff --git a/include/asm-blackfin/mach-common/bits/bootrom.h b/include/asm-blackfin/mach-common/bits/bootrom.h
new file mode 100644
index 0000000..6cdaa4f
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/bootrom.h
@@ -0,0 +1,218 @@
+/*
+ * Boot ROM Entry Points and such
+ */
+
+/* These Blackfins all have a Boot ROM that is not reusable (at all):
+ * BF531 / BF532 / BF533
+ * BF538 / BF539
+ * BF561
+ * So there is nothing for us to export ;(
+ *
+ * These Blackfins started to roll with the idea that the Boot ROM can
+ * provide useful functions, but still only a few (and not really useful):
+ * BF534 / BF536 / BF537
+ *
+ * Looking forward, Boot ROM's on newer Blackfins have quite a few
+ * nice entry points that are usable at runtime and beyond. We'll
+ * only define known legacy parts (listed above) and otherwise just
+ * assume it's a newer part.
+ *
+ * These entry points are accomplished by placing a small jump table at
+ * the start of the Boot ROM. This way the addresses are fixed forever.
+ */
+
+#ifndef __BFIN_PERIPHERAL_BOOTROM__
+#define __BFIN_PERIPHERAL_BOOTROM__
+
+/* All Blackfin's have the Boot ROM entry point at the same address */
+#define _BOOTROM_RESET 0xEF000000
+
+#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
+ defined(__ADSPBF538__) || defined(__ADSPBF539__) || \
+ defined(__ADSPBF561__)
+
+ /* Nothing to export */
+
+#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
+
+ /* The BF537 family */
+
+#define _BOOTROM_FINAL_INIT 0xEF000002
+/* reserved 0xEF000004 */
+#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
+/* reserved 0xEF00000E */
+#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
+#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
+#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
+/* reserved 0xEF000016 */
+/* reserved 0xEF000018 */
+
+ /* Glue to newer Boot ROMs */
+#define _BOOTROM_MDMA _BOOTROM_DO_MEMORY_DMA
+#define _BOOTROM_MEMBOOT _BOOTROM_BOOT_DXE_FLASH
+#define _BOOTROM_SPIBOOT _BOOTROM_BOOT_DXE_FLASH
+#define _BOOTROM_TWIBOOT _BOOTROM_BOOT_DXE_TWI
+
+#else
+
+ /* All the newer Boot ROMs */
+
+#define _BOOTROM_FINAL_INIT 0xEF000002
+#define _BOOTROM_PDMA 0xEF000004
+#define _BOOTROM_MDMA 0xEF000006
+#define _BOOTROM_MEMBOOT 0xEF000008
+#define _BOOTROM_SPIBOOT 0xEF00000A
+#define _BOOTROM_TWIBOOT 0xEF00000C
+/* reserved 0xEF00000E */
+/* reserved 0xEF000010 */
+/* reserved 0xEF000012 */
+/* reserved 0xEF000014 */
+/* reserved 0xEF000016 */
+#define _BOOTROM_OTP_COMMAND 0xEF000018
+#define _BOOTROM_OTP_READ 0xEF00001A
+#define _BOOTROM_OTP_WRITE 0xEF00001C
+#define _BOOTROM_ECC_TABLE 0xEF00001E
+#define _BOOTROM_BOOTKERNEL 0xEF000020
+#define _BOOTROM_GETPORT 0xEF000022
+#define _BOOTROM_NMI 0xEF000024
+#define _BOOTROM_HWERROR 0xEF000026
+#define _BOOTROM_EXCEPTION 0xEF000028
+#define _BOOTROM_CRC32 0xEF000030
+#define _BOOTROM_CRC32POLY 0xEF000032
+#define _BOOTROM_CRC32CALLBACK 0xEF000034
+#define _BOOTROM_CRC32INITCODE 0xEF000036
+#define _BOOTROM_SYSCONTROL 0xEF000038
+#define _BOOTROM_REV 0xEF000040
+#define _BOOTROM_SESR 0xEF001000
+
+#define BOOTROM_CAPS_ADI_BOOT_STRUCTS 1
+
+/* Not available on initial BF54x or BF52x */
+#if (defined(__ADSPBF54x__) && __SILICON_REVISION__ < 1) || \
+ (defined(__ADSPBF52x__) && __SILICON_REVISION__ < 2)
+#define BOOTROM_CAPS_SYSCONTROL 0
+#else
+#define BOOTROM_CAPS_SYSCONTROL 1
+#endif
+
+#endif
+
+#ifndef BOOTROM_CAPS_ADI_BOOT_STRUCTS
+#define BOOTROM_CAPS_ADI_BOOT_STRUCTS 0
+#endif
+#ifndef BOOTROM_CAPS_SYSCONTROL
+#define BOOTROM_CAPS_SYSCONTROL 0
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Structures for the syscontrol() function */
+typedef struct ADI_SYSCTRL_VALUES {
+ uint16_t uwVrCtl;
+ uint16_t uwPllCtl;
+ uint16_t uwPllDiv;
+ uint16_t uwPllLockCnt;
+ uint16_t uwPllStat;
+} ADI_SYSCTRL_VALUES;
+
+#ifndef _BOOTROM_SYSCONTROL
+#define _BOOTROM_SYSCONTROL 0
+#endif
+static uint32_t (* const syscontrol)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)_BOOTROM_SYSCONTROL;
+
+#endif /* __ASSEMBLY__ */
+
+/* Possible syscontrol action flags */
+#define SYSCTRL_READ 0x00000000 /* read registers */
+#define SYSCTRL_WRITE 0x00000001 /* write registers */
+#define SYSCTRL_SYSRESET 0x00000002 /* perform system reset */
+#define SYSCTRL_SOFTRESET 0x00000004 /* perform core and system reset */
+#define SYSCTRL_VRCTL 0x00000010 /* read/write VR_CTL register */
+#define SYSCTRL_EXTVOLTAGE 0x00000020 /* VDDINT supplied externally */
+#define SYSCTRL_INTVOLTAGE 0x00000000 /* VDDINT generated by on-chip regulator */
+#define SYSCTRL_OTPVOLTAGE 0x00000040 /* For Factory Purposes Only */
+#define SYSCTRL_PLLCTL 0x00000100 /* read/write PLL_CTL register */
+#define SYSCTRL_PLLDIV 0x00000200 /* read/write PLL_DIV register */
+#define SYSCTRL_LOCKCNT 0x00000400 /* read/write PLL_LOCKCNT register */
+#define SYSCTRL_PLLSTAT 0x00000800 /* read/write PLL_STAT register */
+
+#ifndef __ASSEMBLY__
+
+/* Structures for working with LDRs and boot rom callbacks */
+typedef struct ADI_BOOT_HEADER {
+ int32_t dBlockCode;
+ void *pTargetAddress;
+ int32_t dByteCount;
+ int32_t dArgument;
+} ADI_BOOT_HEADER;
+
+typedef struct ADI_BOOT_BUFFER {
+ void *pSource;
+ int32_t dByteCount;
+} ADI_BOOT_BUFFER;
+
+typedef struct ADI_BOOT_DATA {
+ void *pSource;
+ void *pDestination;
+ int16_t *pControlRegister;
+ int16_t *pDmaControlRegister;
+ int32_t dControlValue;
+ int32_t dByteCount;
+ int32_t dFlags;
+ int16_t uwDataWidth;
+ int16_t uwSrcModifyMult;
+ int16_t uwDstModifyMult;
+ int16_t uwHwait;
+ int16_t uwSsel;
+ int16_t uwUserShort;
+ int32_t dUserLong;
+ int32_t dReserved2;
+ void *pErrorFunction;
+ void *pLoadFunction;
+ void *pCallBackFunction;
+ ADI_BOOT_HEADER *pHeader;
+ void *pTempBuffer;
+ void *pTempCurrent;
+ int32_t dTempByteCount;
+ int32_t dBlockCount;
+ int32_t dClock;
+ void *pLogBuffer;
+ void *pLogCurrent;
+ int32_t dLogByteCount;
+} ADI_BOOT_DATA;
+
+#endif /* __ASSEMBLY__ */
+
+/* Bit defines for ADI_BOOT_DATA->dFlags */
+#define BFLAG_DMACODE_MASK 0x0000000F
+#define BFLAG_SAFE 0x00000010
+#define BFLAG_AUX 0x00000020
+#define BFLAG_FILL 0x00000100
+#define BFLAG_QUICKBOOT 0x00000200
+#define BFLAG_CALLBACK 0x00000400
+#define BFLAG_INIT 0x00000800
+#define BFLAG_IGNORE 0x00001000
+#define BFLAG_INDIRECT 0x00002000
+#define BFLAG_FIRST 0x00004000
+#define BFLAG_FINAL 0x00008000
+#define BFLAG_HOOK 0x00400000
+#define BFLAG_HDRINDIRECT 0x00800000
+#define BFLAG_TYPE_MASK 0x00300000
+#define BFLAG_TYPE_1 0x00000000
+#define BFLAG_TYPE_2 0x00100000
+#define BFLAG_TYPE_3 0x00200000
+#define BFLAG_TYPE_4 0x00300000
+#define BFLAG_FASTREAD 0x00400000
+#define BFLAG_NOAUTO 0x01000000
+#define BFLAG_PERIPHERAL 0x02000000
+#define BFLAG_SLAVE 0x04000000
+#define BFLAG_WAKEUP 0x08000000
+#define BFLAG_NEXTDXE 0x10000000
+#define BFLAG_RETURN 0x20000000
+#define BFLAG_RESET 0x40000000
+#define BFLAG_NONRESTORE 0x80000000
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/core.h b/include/asm-blackfin/mach-common/bits/core.h
new file mode 100644
index 0000000..d8cee10
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/core.h
@@ -0,0 +1,109 @@
+/*
+ * Misc Core Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_CORE__
+#define __BFIN_PERIPHERAL_CORE__
+
+/*
+ * EVT registers (ILAT, IMASK, and IPEND).
+ */
+
+#define EVT_EMU_P 0 /* Emulator interrupt bit position */
+#define EVT_RST_P 1 /* Reset interrupt bit position */
+#define EVT_NMI_P 2 /* Non Maskable interrupt bit position */
+#define EVT_EVX_P 3 /* Exception bit position */
+#define EVT_IRPTEN_P 4 /* Global interrupt enable bit position */
+#define EVT_IVHW_P 5 /* Hardware Error interrupt bit position */
+#define EVT_IVTMR_P 6 /* Timer interrupt bit position */
+#define EVT_IVG7_P 7 /* IVG7 interrupt bit position */
+#define EVT_IVG8_P 8 /* IVG8 interrupt bit position */
+#define EVT_IVG9_P 9 /* IVG9 interrupt bit position */
+#define EVT_IVG10_P 10 /* IVG10 interrupt bit position */
+#define EVT_IVG11_P 11 /* IVG11 interrupt bit position */
+#define EVT_IVG12_P 12 /* IVG12 interrupt bit position */
+#define EVT_IVG13_P 13 /* IVG13 interrupt bit position */
+#define EVT_IVG14_P 14 /* IVG14 interrupt bit position */
+#define EVT_IVG15_P 15 /* IVG15 interrupt bit position */
+
+#define EVT_EMU MK_BMSK_(EVT_EMU_P ) /* Emulator interrupt mask */
+#define EVT_RST MK_BMSK_(EVT_RST_P ) /* Reset interrupt mask */
+#define EVT_NMI MK_BMSK_(EVT_NMI_P ) /* Non Maskable interrupt mask */
+#define EVT_EVX MK_BMSK_(EVT_EVX_P ) /* Exception mask */
+#define EVT_IRPTEN MK_BMSK_(EVT_IRPTEN_P) /* Global interrupt enable mask */
+#define EVT_IVHW MK_BMSK_(EVT_IVHW_P ) /* Hardware Error interrupt mask */
+#define EVT_IVTMR MK_BMSK_(EVT_IVTMR_P ) /* Timer interrupt mask */
+#define EVT_IVG7 MK_BMSK_(EVT_IVG7_P ) /* IVG7 interrupt mask */
+#define EVT_IVG8 MK_BMSK_(EVT_IVG8_P ) /* IVG8 interrupt mask */
+#define EVT_IVG9 MK_BMSK_(EVT_IVG9_P ) /* IVG9 interrupt mask */
+#define EVT_IVG10 MK_BMSK_(EVT_IVG10_P ) /* IVG10 interrupt mask */
+#define EVT_IVG11 MK_BMSK_(EVT_IVG11_P ) /* IVG11 interrupt mask */
+#define EVT_IVG12 MK_BMSK_(EVT_IVG12_P ) /* IVG12 interrupt mask */
+#define EVT_IVG13 MK_BMSK_(EVT_IVG13_P ) /* IVG13 interrupt mask */
+#define EVT_IVG14 MK_BMSK_(EVT_IVG14_P ) /* IVG14 interrupt mask */
+#define EVT_IVG15 MK_BMSK_(EVT_IVG15_P ) /* IVG15 interrupt mask */
+
+/*
+ * SEQSTAT register
+ */
+
+#define EXCAUSE_P 0 /* Last exception cause bit positions */
+#define EXCAUSE0_P 0 /* Last exception cause bit 0 */
+#define EXCAUSE1_P 1 /* Last exception cause bit 1 */
+#define EXCAUSE2_P 2 /* Last exception cause bit 2 */
+#define EXCAUSE3_P 3 /* Last exception cause bit 3 */
+#define EXCAUSE4_P 4 /* Last exception cause bit 4 */
+#define EXCAUSE5_P 5 /* Last exception cause bit 5 */
+#define IDLE_REQ_P 12 /* Pending idle mode request, set by IDLE instruction */
+#define SFTRESET_P 13 /* Indicates whether the last reset was a software reset (=1) */
+#define HWERRCAUSE_P 14 /* Last hw error cause bit positions */
+#define HWERRCAUSE0_P 14 /* Last hw error cause bit 0 */
+#define HWERRCAUSE1_P 15 /* Last hw error cause bit 1 */
+#define HWERRCAUSE2_P 16 /* Last hw error cause bit 2 */
+#define HWERRCAUSE3_P 17 /* Last hw error cause bit 3 */
+#define HWERRCAUSE4_P 18 /* Last hw error cause bit 4 */
+#define HWERRCAUSE5_P 19 /* Last hw error cause bit 5 */
+#define HWERRCAUSE6_P 20 /* Last hw error cause bit 6 */
+#define HWERRCAUSE7_P 21 /* Last hw error cause bit 7 */
+
+#define EXCAUSE \
+ ( MK_BMSK_(EXCAUSE0_P) | \
+ MK_BMSK_(EXCAUSE1_P) | \
+ MK_BMSK_(EXCAUSE2_P) | \
+ MK_BMSK_(EXCAUSE3_P) | \
+ MK_BMSK_(EXCAUSE4_P) | \
+ MK_BMSK_(EXCAUSE5_P) )
+#define SFTRESET \
+ ( MK_BMSK_(SFTRESET_P) )
+#define HWERRCAUSE \
+ ( MK_BMSK_(HWERRCAUSE0_P) | \
+ MK_BMSK_(HWERRCAUSE1_P) | \
+ MK_BMSK_(HWERRCAUSE2_P) | \
+ MK_BMSK_(HWERRCAUSE3_P) | \
+ MK_BMSK_(HWERRCAUSE4_P) )
+
+/* SWRST Masks */
+#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
+#ifdef __ADSPBF561__
+# define DOUBLE_FAULT_A 0x0008
+# define DOUBLE_FAULT_B 0x0010
+# define DOUBLE_FAULT 0x0018 /* Core [A|B] Double Fault Causes Reset */
+# define RESET_DOUBLE_A 0x0800
+# define RESET_DOUBLE_B 0x1000
+# define RESET_DOUBLE 0x1800 /* SW Reset Generated By Core [A|B] Double-Fault */
+# define RESET_WDOG_B 0x2000
+# define RESET_WDOG_A 0x4000
+# define RESET_WDOG 0x6000 /* SW Reset Generated By Watchdog [A|B] Timer */
+#else
+# define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
+# define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
+# define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
+#endif
+#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
+
+/* SYSCFG Masks */
+#define SSSTEP 0x00000001 /* Supervisor Single Step */
+#define CCEN 0x00000002 /* Cycle Counter Enable */
+#define SNEN 0x00000004 /* Self-Nesting Interrupt Enable */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/dma.h b/include/asm-blackfin/mach-common/bits/dma.h
new file mode 100644
index 0000000..136313e
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/dma.h
@@ -0,0 +1,58 @@
+/*
+ * DMA Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_DMA__
+#define __BFIN_PERIPHERAL_DMA__
+
+/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
+#define DMAEN 0x0001 /* DMA Channel Enable */
+#define WNR 0x0002 /* Channel Direction (W/R*) */
+#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
+#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
+#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
+#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
+#define RESTART 0x0020 /* DMA Buffer Clear */
+#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
+#define DI_EN 0x0080 /* Data Interrupt Enable */
+#define NDSIZE 0x0F00 /* Next Descriptor bitmask */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+#define FLOW_STOP 0x0000 /* Stop Mode */
+#define FLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
+
+#define DMAEN_P 0 /* Channel Enable */
+#define WNR_P 1 /* Channel Direction (W/R*) */
+#define DMA2D_P 4 /* 2D/1D* Mode */
+#define RESTART_P 5 /* Restart */
+#define DI_SEL_P 6 /* Data Interrupt Select */
+#define DI_EN_P 7 /* Data Interrupt Enable */
+
+/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
+#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
+#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
+#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
+#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
+
+#define DMA_DONE_P 0 /* DMA Done Indicator */
+#define DMA_ERR_P 1 /* DMA Error Indicator */
+#define DFETCH_P 2 /* Descriptor Fetch Indicator */
+#define DMA_RUN_P 3 /* DMA Running Indicator */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
+#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */
+#define PMAP 0xF000 /* Peripheral Mapped To This Channel */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ebiu.h b/include/asm-blackfin/mach-common/bits/ebiu.h
new file mode 100644
index 0000000..ab530ad
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ebiu.h
@@ -0,0 +1,421 @@
+/*
+ * EBIU Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_EBIU__
+#define __BFIN_PERIPHERAL_EBIU__
+
+/* EBIU_AMGCTL Masks */
+#define AMCKEN 0x0001 /* Enable CLKOUT */
+#define AMBEN_NONE 0x0000 /* All Banks Disabled */
+#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0,/ 1, and 2 */
+#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+#define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */
+#define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */
+#define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */
+#define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */
+#define CDPRIO 0x0100 /* Core has priority over DMA for external accesses */
+
+/* EBIU_AMGCTL Bit Positions */
+#define AMCKEN_P 0x00000000 /* Enable CLKOUT */
+#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */
+#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+#define B0_PEN_P 0x00000004 /* Enable 16-bit packing Bank 0 */
+#define B1_PEN_P 0x00000005 /* Enable 16-bit packing Bank 1 */
+#define B2_PEN_P 0x00000006 /* Enable 16-bit packing Bank 2 */
+#define B3_PEN_P 0x00000007 /* Enable 16-bit packing Bank 3 */
+#define CDPRIO_P 0x00000008 /* Core has priority over DMA for external accesses */
+
+/* EBIU_AMBCTL0 Masks */
+#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */
+
+/* EBIU_AMBCTL1 Masks */
+#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */
+
+/* Only available on newer parts */
+#ifdef EBIU_MODE
+
+/* EBIU_MBSCTL Bit Positions */
+#define AMSB0CTL_P 0
+#define AMSB1CTL_P 2
+#define AMSB2CTL_P 4
+#define AMSB3CTL_P 6
+
+/* EBIU_MBSCTL Masks */
+#define AMSB0CTL_MASK (0x3 << AMSB0CTL_P) /* Async Memory Bank 0 Control Modes */
+#define AMSB0CTL_NONE (0x0 << AMSB0CTL_P) /* Control Mode - 00 - No logic */
+#define AMSB0CTL_ARE (0x1 << AMSB0CTL_P) /* Control Mode - 01 - OR-ed with /ARE */
+#define AMSB0CTL_AOE (0x2 << AMSB0CTL_P) /* Control Mode - 02 - OR-ed with /AOE */
+#define AMSB0CTL_AWE (0x3 << AMSB0CTL_P) /* Control Mode - 03 - OR-ed with /AWE */
+#define AMSB1CTL_MASK (0x3 << AMSB1CTL_P) /* Async Memory Bank 1 Control Modes */
+#define AMSB1CTL_NONE (0x0 << AMSB1CTL_P) /* Control Mode - 00 - No logic */
+#define AMSB1CTL_ARE (0x1 << AMSB1CTL_P) /* Control Mode - 01 - OR-ed with /ARE */
+#define AMSB1CTL_AOE (0x2 << AMSB1CTL_P) /* Control Mode - 02 - OR-ed with /AOE */
+#define AMSB1CTL_AWE (0x3 << AMSB1CTL_P) /* Control Mode - 03 - OR-ed with /AWE */
+#define AMSB2CTL_MASK (0x3 << AMSB2CTL_P) /* Async Memory Bank 2 Control Modes */
+#define AMSB2CTL_NONE (0x0 << AMSB2CTL_P) /* Control Mode - 00 - No logic */
+#define AMSB2CTL_ARE (0x1 << AMSB2CTL_P) /* Control Mode - 01 - OR-ed with /ARE */
+#define AMSB2CTL_AOE (0x2 << AMSB2CTL_P) /* Control Mode - 02 - OR-ed with /AOE */
+#define AMSB2CTL_AWE (0x3 << AMSB2CTL_P) /* Control Mode - 03 - OR-ed with /AWE */
+#define AMSB3CTL_MASK (0x3 << AMSB3CTL_P) /* Async Memory Bank 3 Control Modes */
+#define AMSB3CTL_NONE (0x0 << AMSB3CTL_P) /* Control Mode - 00 - No logic */
+#define AMSB3CTL_ARE (0x1 << AMSB3CTL_P) /* Control Mode - 01 - OR-ed with /ARE */
+#define AMSB3CTL_AOE (0x2 << AMSB3CTL_P) /* Control Mode - 02 - OR-ed with /AOE */
+#define AMSB3CTL_AWE (0x3 << AMSB3CTL_P) /* Control Mode - 03 - OR-ed with /AWE */
+
+/* EBIU_MODE Bit Positions */
+#define B0MODE_P 0
+#define B1MODE_P 2
+#define B2MODE_P 4
+#define B3MODE_P 6
+
+/* EBIU_MODE Masks */
+#define B0MODE_MASK (0x3 << B0MODE_P) /* Async Memory Bank 0 Access Mode */
+#define B0MODE_ASYNC (0x0 << B0MODE_P) /* Access Mode - 00 - Asynchronous Mode */
+#define B0MODE_FLASH (0x1 << B0MODE_P) /* Access Mode - 01 - Asynchronous Flash Mode */
+#define B0MODE_PAGE (0x2 << B0MODE_P) /* Access Mode - 10 - Asynchronous Page Mode */
+#define B0MODE_BURST (0x3 << B0MODE_P) /* Access Mode - 11 - Synchronous (Burst) Mode */
+#define B1MODE_MASK (0x3 << B1MODE_P) /* Async Memory Bank 1 Access Mode */
+#define B1MODE_ASYNC (0x0 << B1MODE_P) /* Access Mode - 00 - Asynchronous Mode */
+#define B1MODE_FLASH (0x1 << B1MODE_P) /* Access Mode - 01 - Asynchronous Flash Mode */
+#define B1MODE_PAGE (0x2 << B1MODE_P) /* Access Mode - 10 - Asynchronous Page Mode */
+#define B1MODE_BURST (0x3 << B1MODE_P) /* Access Mode - 11 - Synchronous (Burst) Mode */
+#define B2MODE_MASK (0x3 << B2MODE_P) /* Async Memory Bank 2 Access Mode */
+#define B2MODE_ASYNC (0x0 << B2MODE_P) /* Access Mode - 00 - Asynchronous Mode */
+#define B2MODE_FLASH (0x1 << B2MODE_P) /* Access Mode - 01 - Asynchronous Flash Mode */
+#define B2MODE_PAGE (0x2 << B2MODE_P) /* Access Mode - 10 - Asynchronous Page Mode */
+#define B2MODE_BURST (0x3 << B2MODE_P) /* Access Mode - 11 - Synchronous (Burst) Mode */
+#define B3MODE_MASK (0x3 << B3MODE_P) /* Async Memory Bank 3 Access Mode */
+#define B3MODE_ASYNC (0x0 << B3MODE_P) /* Access Mode - 00 - Asynchronous Mode */
+#define B3MODE_FLASH (0x1 << B3MODE_P) /* Access Mode - 01 - Asynchronous Flash Mode */
+#define B3MODE_PAGE (0x2 << B3MODE_P) /* Access Mode - 10 - Asynchronous Page Mode */
+#define B3MODE_BURST (0x3 << B3MODE_P) /* Access Mode - 11 - Synchronous (Burst) Mode */
+
+/* EBIU_FCTL Bit Positions */
+#define TESTSETLOCK_P 0
+#define BCLK_P 1
+#define PGWS_P 3
+#define PGSZ_P 6
+#define RDDL_P 7
+
+/* EBIU_FCTL Masks */
+#define TESTSETLOCK (0x1 << TESTSETLOCK_P) /* Test set lock */
+#define BCLK_MASK (0x3 << BCLK_P) /* Burst clock frequency */
+#define BCLK_2 (0x1 << BCLK_P) /* Burst clock frequency - SCLK/2 */
+#define BCLK_3 (0x2 << BCLK_P) /* Burst clock frequency - SCLK/3 */
+#define BCLK_4 (0x3 << BCLK_P) /* Burst clock frequency - SCLK/4 */
+#define PGWS_MASK (0x7 << PGWS_P) /* Page wait states */
+#define PGWS_0 (0x0 << PGWS_P) /* Page wait states - 0 cycles */
+#define PGWS_1 (0x1 << PGWS_P) /* Page wait states - 1 cycles */
+#define PGWS_2 (0x2 << PGWS_P) /* Page wait states - 2 cycles */
+#define PGWS_3 (0x3 << PGWS_P) /* Page wait states - 3 cycles */
+#define PGWS_4 (0x4 << PGWS_P) /* Page wait states - 4 cycles */
+#define PGSZ (0x1 << PGSZ_P) /* Page size */
+#define PGSZ_4 (0x0 << PGSZ_P) /* Page size - 4 words */
+#define PGSZ_8 (0x1 << PGSZ_P) /* Page size - 8 words */
+#define RDDL (0x38 << RDDL_P) /* Read data delay */
+
+/* EBIU_ARBSTAT Masks */
+#define ARBSTAT 0x00000001 /* Arbitration status */
+#define BGSTAT 0x00000002 /* External Bus grant status */
+
+#endif /* EBIU_MODE */
+
+/* Only available on SDRAM based-parts */
+#ifdef EBIU_SDGCTL
+
+/* EBIU_SDGCTL Masks */
+#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define SCK1E 0x00000002 /* Enable CLKOUT, /SCLK1 */
+#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */
+#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */
+#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
+#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
+#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
+#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
+#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
+#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
+#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
+#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
+#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
+#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
+#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
+#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
+#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
+#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
+#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
+#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
+#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
+#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
+#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
+#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
+#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
+#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
+#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
+#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
+#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
+#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
+#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
+#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
+#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
+#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
+#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
+#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
+#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
+#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
+#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
+#define PUPSD 0x00200000 /* Power-up start delay */
+#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */
+#define EBUFE 0x02000000 /* Enable external buffering timing */
+#define FBBRW 0x04000000 /* Fast back-to-back read write enable */
+#define EMREN 0x10000000 /* Extended mode register enable */
+#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */
+#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EBE 0x0001 /* Enable SDRAM External Bank */
+#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
+#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
+#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
+#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
+#define EBSZ_256 0x0007 /* SDRAM External Bank Size = 256MB */
+#define EBSZ_512 0x0008 /* SDRAM External Bank Size = 512MB */
+#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
+#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
+#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
+#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
+
+#ifdef __ADSPBF561__
+
+#define EB0E (EBE<<0) /* Enable SDRAM external bank 0 */
+#define EB0SZ_16 (EBSZ_16<<0) /* SDRAM external bank size = 16MB */
+#define EB0SZ_32 (EBSZ_32<<0) /* SDRAM external bank size = 32MB */
+#define EB0SZ_64 (EBSZ_64<<0) /* SDRAM external bank size = 64MB */
+#define EB0SZ_128 (EBSZ_128<<0) /* SDRAM external bank size = 128MB */
+#define EB0CAW_8 (EBCAW_8<<0) /* SDRAM external bank column address width = 8 bits */
+#define EB0CAW_9 (EBCAW_9<<0) /* SDRAM external bank column address width = 9 bits */
+#define EB0CAW_10 (EBCAW_10<<0) /* SDRAM external bank column address width = 9 bits */
+#define EB0CAW_11 (EBCAW_11<<0) /* SDRAM external bank column address width = 9 bits */
+
+#define EB1E (EBE<<8) /* Enable SDRAM external bank 0 */
+#define EB1SZ_16 (EBSZ_16<<8) /* SDRAM external bank size = 16MB */
+#define EB1SZ_32 (EBSZ_32<<8) /* SDRAM external bank size = 32MB */
+#define EB1SZ_64 (EBSZ_64<<8) /* SDRAM external bank size = 64MB */
+#define EB1SZ_128 (EBSZ_128<<8) /* SDRAM external bank size = 128MB */
+#define EB1CAW_8 (EBCAW_8<<8) /* SDRAM external bank column address width = 8 bits */
+#define EB1CAW_9 (EBCAW_9<<8) /* SDRAM external bank column address width = 9 bits */
+#define EB1CAW_10 (EBCAW_10<<8) /* SDRAM external bank column address width = 9 bits */
+#define EB1CAW_11 (EBCAW_11<<8) /* SDRAM external bank column address width = 9 bits */
+
+#define EB2E (EBE<<16) /* Enable SDRAM external bank 0 */
+#define EB2SZ_16 (EBSZ_16<<16) /* SDRAM external bank size = 16MB */
+#define EB2SZ_32 (EBSZ_32<<16) /* SDRAM external bank size = 32MB */
+#define EB2SZ_64 (EBSZ_64<<16) /* SDRAM external bank size = 64MB */
+#define EB2SZ_128 (EBSZ_128<<16) /* SDRAM external bank size = 128MB */
+#define EB2CAW_8 (EBCAW_8<<16) /* SDRAM external bank column address width = 8 bits */
+#define EB2CAW_9 (EBCAW_9<<16) /* SDRAM external bank column address width = 9 bits */
+#define EB2CAW_10 (EBCAW_10<<16) /* SDRAM external bank column address width = 9 bits */
+#define EB2CAW_11 (EBCAW_11<<16) /* SDRAM external bank column address width = 9 bits */
+
+#define EB3E (EBE<<24) /* Enable SDRAM external bank 0 */
+#define EB3SZ_16 (EBSZ_16<<24) /* SDRAM external bank size = 16MB */
+#define EB3SZ_32 (EBSZ_32<<24) /* SDRAM external bank size = 32MB */
+#define EB3SZ_64 (EBSZ_64<<24) /* SDRAM external bank size = 64MB */
+#define EB3SZ_128 (EBSZ_128<<24) /* SDRAM external bank size = 128MB */
+#define EB3CAW_8 (EBCAW_8<<24) /* SDRAM external bank column address width = 8 bits */
+#define EB3CAW_9 (EBCAW_9<<24) /* SDRAM external bank column address width = 9 bits */
+#define EB3CAW_10 (EBCAW_10<<24) /* SDRAM external bank column address width = 9 bits */
+#define EB3CAW_11 (EBCAW_11<<24) /* SDRAM external bank column address width = 9 bits */
+
+#endif /* BF561 */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI 0x0001 /* SDRAM controller is idle */
+#define SDSRA 0x0002 /* SDRAM SDRAM self refresh is active */
+#define SDPUA 0x0004 /* SDRAM power up active */
+#define SDRS 0x0008 /* SDRAM is in reset state */
+#define SDEASE 0x0010 /* SDRAM EAB sticky error status - W1C */
+#define BGSTAT 0x0020 /* Bus granted */
+
+#endif /* EBIU_SDGCTL */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/emac.h b/include/asm-blackfin/mach-common/bits/emac.h
new file mode 100644
index 0000000..7a43bbb
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/emac.h
@@ -0,0 +1,220 @@
+/*
+ * Ethernet MAC Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_EMAC__
+#define __BFIN_PERIPHERAL_EMAC__
+
+/* EMAC_OPMODE Masks */
+#define RE 0x00000001 /* Receiver Enable */
+#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
+#define HU 0x00000010 /* Hash Filter Unicast Address */
+#define HM 0x00000020 /* Hash Filter Multicast Address */
+#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
+#define PR 0x00000080 /* Promiscuous Mode Enable */
+#define IFE 0x00000100 /* Inverse Filtering Enable */
+#define DBF 0x00000200 /* Disable Broadcast Frame Reception */
+#define PBF 0x00000400 /* Pass Bad Frames Enable */
+#define PSF 0x00000800 /* Pass Short Frames Enable */
+#define RAF 0x00001000 /* Receive-All Mode */
+#define TE 0x00010000 /* Transmitter Enable */
+#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
+#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
+#define DC 0x00080000 /* Deferral Check */
+#define BOLMT 0x00300000 /* Back-Off Limit */
+#define BOLMT_10 0x00000000 /* 10-bit range */
+#define BOLMT_8 0x00100000 /* 8-bit range */
+#define BOLMT_4 0x00200000 /* 4-bit range */
+#define BOLMT_1 0x00300000 /* 1-bit range */
+#define DRTY 0x00400000 /* Disable TX Retry On Collision */
+#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
+#define RMII 0x01000000 /* RMII/MII* Mode */
+#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
+#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
+#define LB 0x08000000 /* Internal Loopback Enable */
+#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
+
+/* EMAC_STAADD Masks */
+#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
+#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
+#define STADISPRE 0x00000004 /* Disable Preamble Generation */
+#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
+#define REGAD 0x000007C0 /* STA Register Address */
+#define PHYAD 0x0000F800 /* PHY Device Address */
+
+#define SET_REGAD(x) (((x) & 0x1F) << 6) /* Set STA Register Address */
+#define SET_PHYAD(x) (((x) & 0x1F) << 11) /* Set PHY Device Address */
+
+/* EMAC_STADAT Mask */
+#define STADATA 0x0000FFFF /* Station Management Data */
+
+/* EMAC_FLC Masks */
+#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
+#define FLCE 0x00000002 /* Flow Control Enable */
+#define PCF 0x00000004 /* Pass Control Frames */
+#define BKPRSEN 0x00000008 /* Enable Backpressure */
+#define FLCPAUSE 0xFFFF0000 /* Pause Time */
+
+#define SET_FLCPAUSE(x) (((x) & 0xFFFF) << 16) /* Set Pause Time */
+
+/* EMAC_WKUP_CTL Masks */
+#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
+#define MPKE 0x00000002 /* Magic Packet Enable */
+#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
+#define GUWKE 0x00000008 /* Global Unicast Wake Enable */
+#define MPKS 0x00000020 /* Magic Packet Received Status */
+#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
+
+/* EMAC_WKUP_FFCMD Masks */
+#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
+#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
+#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
+#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
+#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
+#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
+#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
+#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
+
+/* EMAC_WKUP_FFOFF Masks */
+#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
+#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
+#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
+#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
+
+#define SET_WF0_OFF(x) (((x) & 0xFF) << 0) /* Set Wake-Up Filter 0 Byte Offset */
+#define SET_WF1_OFF(x) (((x) & 0xFF) << 8) /* Set Wake-Up Filter 1 Byte Offset */
+#define SET_WF2_OFF(x) (((x) & 0xFF) << 16) /* Set Wake-Up Filter 2 Byte Offset */
+#define SET_WF3_OFF(x) (((x) & 0xFF) << 24) /* Set Wake-Up Filter 3 Byte Offset */
+/* Set ALL Offsets */
+#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks */
+#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
+#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
+
+#define SET_WF0_CRC(x) (((x) & 0xFFFF) << 0) /* Set Wake-Up Filter 0 Target CRC */
+#define SET_WF1_CRC(x) (((x) & 0xFFFF) << 16) /* Set Wake-Up Filter 1 Target CRC */
+
+/* EMAC_WKUP_FFCRC1 Masks */
+#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
+#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
+
+#define SET_WF2_CRC(x) (((x) & 0xFFFF) << 0) /* Set Wake-Up Filter 2 Target CRC */
+#define SET_WF3_CRC(x) (((x) & 0xFFFF) << 16) /* Set Wake-Up Filter 3 Target CRC */
+
+/* EMAC_SYSCTL Masks */
+#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
+#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
+#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
+#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
+
+#define SET_MDCDIV(x) (((x) & 0x3F) << 8) /* Set MDC Clock Divisor */
+
+/* EMAC_SYSTAT Masks */
+#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
+#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
+#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
+#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
+#define WAKEDET 0x00000010 /* Wake-Up Detected Status */
+#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
+#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
+#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
+#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
+#define RX_COMP 0x00001000 /* RX Frame Complete */
+#define RX_OK 0x00002000 /* RX Frame Received With No Errors */
+#define RX_LONG 0x00004000 /* RX Frame Too Long Error */
+#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
+#define RX_CRC 0x00010000 /* RX Frame CRC Error */
+#define RX_LEN 0x00020000 /* RX Frame Length Error */
+#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
+#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
+#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
+#define RX_PHY 0x00200000 /* RX Frame PHY Error */
+#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
+#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
+#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
+#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
+#define RX_CTL 0x04000000 /* RX Control Frame Indicator */
+#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */
+#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */
+#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */
+#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */
+#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */
+
+/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */
+#define TX_COMP 0x00000001 /* TX Frame Complete */
+#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */
+#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */
+#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */
+#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */
+#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */
+#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */
+#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */
+#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */
+#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */
+#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */
+#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */
+#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */
+#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */
+#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */
+
+/* EMAC_MMC_CTL Masks */
+#define RSTC 0x00000001 /* Reset All Counters */
+#define CROLL 0x00000002 /* Counter Roll-Over Enable */
+#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */
+#define MMCE 0x00000008 /* Enable MMC Counter Operation */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
+#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */
+#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */
+#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */
+#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */
+#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */
+#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */
+#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */
+#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */
+#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */
+#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */
+#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */
+#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */
+#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */
+#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */
+#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */
+#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */
+#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */
+#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */
+#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */
+#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */
+#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */
+#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */
+#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */
+#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */
+#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */
+#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */
+#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */
+#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */
+#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */
+#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */
+#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */
+#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */
+#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */
+#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */
+#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */
+#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */
+#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */
+#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */
+#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */
+#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */
+#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */
+#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */
+#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */
+#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */
+#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */
+#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
+#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/eppi.h b/include/asm-blackfin/mach-common/bits/eppi.h
new file mode 100644
index 0000000..fb1456f
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/eppi.h
@@ -0,0 +1,70 @@
+/*
+ * Enhanced PPI (EPPI)
+ */
+
+#ifndef __BFIN_PERIPHERAL_EPPI__
+#define __BFIN_PERIPHERAL_EPPI__
+
+/* Bit masks for EPPIx_STATUS */
+#define CFIFO_ERR 0x0001 /* Chroma FIFO Error */
+#define YFIFO_ERR 0x0002 /* Luma FIFO Error */
+#define LTERR_OVR 0x0004 /* Line Track Overflow */
+#define LTERR_UNDR 0x0008 /* Line Track Underflow */
+#define FTERR_OVR 0x0010 /* Frame Track Overflow */
+#define FTERR_UNDR 0x0020 /* Frame Track Underflow */
+#define ERR_NCOR 0x0040 /* Preamble Error Not Corrected */
+#define DMA1URQ 0x0080 /* DMA1 Urgent Request */
+#define DMA0URQ 0x0100 /* DMA0 Urgent Request */
+#define ERR_DET 0x4000 /* Preamble Error Detected */
+#define FLD 0x8000 /* Field */
+
+/* Bit masks for EPPIx_CONTROL */
+#define EPPI_EN 0x00000001 /* Enable */
+#define EPPI_DIR 0x00000002 /* Direction */
+#define XFR_TYPE 0x0000000c /* Operating Mode */
+#define FS_CFG 0x00000030 /* Frame Sync Configuration */
+#define FLD_SEL 0x00000040 /* Field Select/Trigger */
+#define ITU_TYPE 0x00000080 /* ITU Interlaced or Progressive */
+#define BLANKGEN 0x00000100 /* ITU Output Mode with Internal Blanking Generation */
+#define ICLKGEN 0x00000200 /* Internal Clock Generation */
+#define IFSGEN 0x00000400 /* Internal Frame Sync Generation */
+#define POLC 0x00001800 /* Frame Sync and Data Driving/Sampling Edges */
+#define POLS 0x00006000 /* Frame Sync Polarity */
+#define DLENGTH 0x00038000 /* Data Length */
+#define SKIP_EN 0x00040000 /* Skip Enable */
+#define SKIP_EO 0x00080000 /* Skip Even or Odd */
+#define PACKEN 0x00100000 /* Packing/Unpacking Enable */
+#define SWAPEN 0x00200000 /* Swap Enable */
+#define SIGN_EXT 0x00400000 /* Sign Extension or Zero-filled / Data Split Format */
+#define SPLT_EVEN_ODD 0x00800000 /* Split Even and Odd Data Samples */
+#define SUBSPLT_ODD 0x01000000 /* Sub-split Odd Samples */
+#define DMACFG 0x02000000 /* One or Two DMA Channels Mode */
+#define RGB_FMT_EN 0x04000000 /* RGB Formatting Enable */
+#define FIFO_RWM 0x18000000 /* FIFO Regular Watermarks */
+#define FIFO_UWM 0x60000000 /* FIFO Urgent Watermarks */
+
+#define DLEN_8 (0 << 15) /* 000 - 8 bits */
+#define DLEN_10 (1 << 15) /* 001 - 10 bits */
+#define DLEN_12 (2 << 15) /* 010 - 12 bits */
+#define DLEN_14 (3 << 15) /* 011 - 14 bits */
+#define DLEN_16 (4 << 15) /* 100 - 16 bits */
+#define DLEN_18 (5 << 15) /* 101 - 18 bits */
+#define DLEN_24 (6 << 15) /* 110 - 24 bits */
+
+/* Bit masks for EPPIx_FS2W_LVB */
+#define F1VB_BD 0x000000ff /* Vertical Blanking before Field 1 Active Data */
+#define F1VB_AD 0x0000ff00 /* Vertical Blanking after Field 1 Active Data */
+#define F2VB_BD 0x00ff0000 /* Vertical Blanking before Field 2 Active Data */
+#define F2VB_AD 0xff000000 /* Vertical Blanking after Field 2 Active Data */
+
+/* Bit masks for EPPIx_FS2W_LAVF */
+#define F1_ACT 0x0000ffff /* Number of Lines of Active Data in Field 1 */
+#define F2_ACT 0xffff0000 /* Number of Lines of Active Data in Field 2 */
+
+/* Bit masks for EPPIx_CLIP */
+#define LOW_ODD 0x000000ff /* Lower Limit for Odd Bytes (Chroma) */
+#define HIGH_ODD 0x0000ff00 /* Upper Limit for Odd Bytes (Chroma) */
+#define LOW_EVEN 0x00ff0000 /* Lower Limit for Even Bytes (Luma) */
+#define HIGH_EVEN 0xff000000 /* Upper Limit for Even Bytes (Luma) */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/lockbox.h b/include/asm-blackfin/mach-common/bits/lockbox.h
new file mode 100644
index 0000000..09310e1
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/lockbox.h
@@ -0,0 +1,62 @@
+/*
+ * Lockbox/Security Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_LOCKBOX__
+#define __BFIN_PERIPHERAL_LOCKBOX__
+
+#ifndef __ASSEMBLY__
+
+#include "bootrom.h"
+
+/* SESR argument structure. Expected to reside at 0xFF900018. */
+typedef struct SESR_args {
+ unsigned short usFlags; /* security firmware flags */
+ unsigned short usIRQMask; /* interrupt mask */
+ unsigned long ulMessageSize; /* message length in bytes */
+ unsigned long ulSFEntryPoint; /* entry point of secure function */
+ unsigned long ulMessagePtr; /* pointer to the buffer containing
+ the digital signature and message */
+ unsigned long ulReserved1; /* reserved */
+ unsigned long ulReserved2; /* reserved */
+} tSESR_args;
+
+/* Secure Entry Service Routine */
+void (* const sesr)(void) = (void *)_BOOTROM_SESR;
+
+#endif
+
+/* SESR flags argument bitfields */
+#define SESR_FLAGS_STAY_AT_NMI 0x0000
+#define SESR_FLAGS_DROP_BELOW_NMI 0x0001
+#define SESR_FLAGS_NO_SF_DMA 0x0000
+#define SESR_FLAGS_DMA_SF_TO_RUN_DEST 0x0002
+#define SESR_FLAGS_USE_ADI_PUB_KEY 0x0000
+#define SESR_FLAGS_USE_CUST_PUB_KEY 0x0100
+
+/* Bit masks for SECURE_SYSSWT */
+#define EMUDABL 0x00000001 /* Emulation Disable */
+#define RSTDABL 0x00000002 /* Reset Disable */
+#define L1IDABL 0x0000001c /* L1 Instruction Memory Disable */
+#define L1DADABL 0x000000e0 /* L1 Data Bank A Memory Disable */
+#define L1DBDABL 0x00000700 /* L1 Data Bank B Memory Disable */
+#define DMA0OVR 0x00000800 /* DMA0 Memory Access Override */
+#define DMA1OVR 0x00001000 /* DMA1 Memory Access Override */
+#define EMUOVR 0x00004000 /* Emulation Override */
+#define OTPSEN 0x00008000 /* OTP Secrets Enable */
+#define L2DABL 0x00070000 /* L2 Memory Disable */
+
+/* Bit masks for SECURE_CONTROL */
+#define SECURE0 0x0001 /* SECURE 0 */
+#define SECURE1 0x0002 /* SECURE 1 */
+#define SECURE2 0x0004 /* SECURE 2 */
+#define SECURE3 0x0008 /* SECURE 3 */
+
+/* Bit masks for SECURE_STATUS */
+#define SECMODE 0x0003 /* Secured Mode Control State */
+#define NMI 0x0004 /* Non Maskable Interrupt */
+#define AFVALID 0x0008 /* Authentication Firmware Valid */
+#define AFEXIT 0x0010 /* Authentication Firmware Exit */
+#define SECSTAT 0x00e0 /* Secure Status */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/mpu.h b/include/asm-blackfin/mach-common/bits/mpu.h
new file mode 100644
index 0000000..39998f8
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/mpu.h
@@ -0,0 +1,116 @@
+/*
+ * MPU Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_MPU__
+#define __BFIN_PERIPHERAL_MPU__
+
+/*
+ * DMEM_CONTROL Register
+ */
+
+/* ** Bit Positions */
+#define ENDM_P 0x00 /* (doesn't really exist) Enable Data Memory L1 */
+#define DMCTL_ENDM_P ENDM_P /* "" (older define) */
+#define ENDCPLB_P 0x01 /* Enable DCPLBS */
+#define DMCTL_ENDCPLB_P ENDCPLB_P /* "" (older define) */
+#define DMC0_P 0x02 /* L1 Data Memory Configure bit 0 */
+#define DMCTL_DMC0_P DMC0_P /* "" (older define) */
+#define DMC1_P 0x03 /* L1 Data Memory Configure bit 1 */
+#define DMCTL_DMC1_P DMC1_P /* "" (older define) */
+#define DCBS_P 0x04 /* L1 Data Cache Bank Select */
+#define PORT_PREF0_P 0x12 /* DAG0 Port Preference */
+#define PORT_PREF1_P 0x13 /* DAG1 Port Preference */
+
+/* ** Masks */
+#define ENDM 0x00000001 /* (doesn't really exist) Enable Data Memory L1 */
+#define ENDCPLB 0x00000002 /* Enable DCPLB */
+#define ASRAM_BSRAM 0x00000000
+#define ACACHE_BSRAM 0x00000008
+#define ACACHE_BCACHE 0x0000000C
+#define DCBS 0x00000010 /* L1 Data Cache Bank Select */
+#define PORT_PREF0 0x00001000 /* DAG0 Port Preference */
+#define PORT_PREF1 0x00002000 /* DAG1 Port Preference */
+
+/* IMEM_CONTROL Register */
+/* ** Bit Positions */
+#define ENIM_P 0x00 /* Enable L1 Code Memory */
+#define IMCTL_ENIM_P 0x00 /* "" (older define) */
+#define ENICPLB_P 0x01 /* Enable ICPLB */
+#define IMCTL_ENICPLB_P 0x01 /* "" (older define) */
+#define IMC_P 0x02 /* Enable */
+#define IMCTL_IMC_P 0x02 /* Configure L1 code memory as cache (0=SRAM) */
+#define ILOC0_P 0x03 /* Lock Way 0 */
+#define ILOC1_P 0x04 /* Lock Way 1 */
+#define ILOC2_P 0x05 /* Lock Way 2 */
+#define ILOC3_P 0x06 /* Lock Way 3 */
+#define LRUPRIORST_P 0x0D /* Least Recently Used Replacement Priority */
+
+/* ** Masks */
+#define ENIM 0x00000001 /* Enable L1 Code Memory */
+#define ENICPLB 0x00000002 /* Enable ICPLB */
+#define IMC 0x00000004 /* Configure L1 code memory as cache (0=SRAM) */
+#define ILOC0 0x00000008 /* Lock Way 0 */
+#define ILOC1 0x00000010 /* Lock Way 1 */
+#define ILOC2 0x00000020 /* Lock Way 2 */
+#define ILOC3 0x00000040 /* Lock Way 3 */
+#define LRUPRIORST 0x00002000 /* Least Recently Used Replacement Priority */
+
+/* DCPLB_DATA and ICPLB_DATA Registers */
+/* ** Bit Positions */
+#define CPLB_VALID_P 0x00000000 /* 0=invalid entry, 1=valid entry */
+#define CPLB_LOCK_P 0x00000001 /* 0=entry may be replaced, 1=entry locked */
+#define CPLB_USER_RD_P 0x00000002 /* 0=no read access, 1=read access allowed (user mode) */
+
+/* ** Masks */
+#define CPLB_VALID 0x00000001 /* 0=invalid entry, 1=valid entry */
+#define CPLB_LOCK 0x00000002 /* 0=entry may be replaced, 1=entry locked */
+#define CPLB_USER_RD 0x00000004 /* 0=no read access, 1=read access allowed (user mode) */
+#define PAGE_SIZE_1KB 0x00000000 /* 1 KB page size */
+#define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */
+#define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */
+#define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */
+#define PAGE_SIZE_MASK 0x00030000 /* the bits for the page_size field */
+#define PAGE_SIZE_SHIFT 16
+#define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not mapped to L1 */
+#define CPLB_PORTPRIO 0x00000200 /* 0=low priority port, 1= high priority port */
+#define CPLB_L1_CHBL 0x00001000 /* 0=non-cacheable in L1, 1=cacheable in L1 */
+
+/* ICPLB_DATA only */
+#define CPLB_LRUPRIO 0x00000100 /* 0=can be replaced by any line, 1=priority for non-replacement */
+
+/* DCPLB_DATA only */
+#define CPLB_USER_WR 0x00000008 /* 0=no write access, 0=write access allowed (user mode) */
+#define CPLB_SUPV_WR 0x00000010 /* 0=no write access, 0=write access allowed (supervisor mode) */
+#define CPLB_DIRTY 0x00000080 /* 1=dirty, 0=clean */
+#define CPLB_L1_AOW 0x00008000 /* 0=do not allocate cache lines on write-through writes, */
+ /* 1= allocate cache lines on write-through writes. */
+#define CPLB_WT 0x00004000 /* 0=write-back, 1=write-through */
+
+/* ITEST_COMMAND and DTEST_COMMAND Registers */
+/* ** Masks */
+#define TEST_READ 0x00000000 /* Read Access */
+#define TEST_WRITE 0x00000002 /* Write Access */
+#define TEST_TAG 0x00000000 /* Access TAG */
+#define TEST_DATA 0x00000004 /* Access DATA */
+#define TEST_DW0 0x00000000 /* Select Double Word 0 */
+#define TEST_DW1 0x00000008 /* Select Double Word 1 */
+#define TEST_DW2 0x00000010 /* Select Double Word 2 */
+#define TEST_DW3 0x00000018 /* Select Double Word 3 */
+#define TEST_MB0 0x00000000 /* Select Mini-Bank 0 */
+#define TEST_MB1 0x00010000 /* Select Mini-Bank 1 */
+#define TEST_MB2 0x00020000 /* Select Mini-Bank 2 */
+#define TEST_MB3 0x00030000 /* Select Mini-Bank 3 */
+#define TEST_SET(x) ((x << 5) & 0x03E0) /* Set Index 0->31 */
+#define TEST_WAY0 0x00000000 /* Access Way0 */
+#define TEST_WAY1 0x04000000 /* Access Way1 */
+
+/* ** ITEST_COMMAND only */
+#define TEST_WAY2 0x08000000 /* Access Way2 */
+#define TEST_WAY3 0x0C000000 /* Access Way3 */
+
+/* ** DTEST_COMMAND only */
+#define TEST_BNKSELA 0x00000000 /* Access SuperBank A */
+#define TEST_BNKSELB 0x00800000 /* Access SuperBank B */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/otp.h b/include/asm-blackfin/mach-common/bits/otp.h
new file mode 100644
index 0000000..d529a0a
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/otp.h
@@ -0,0 +1,72 @@
+/*
+ * OTP Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_OTP__
+#define __BFIN_PERIPHERAL_OTP__
+
+#ifndef __ASSEMBLY__
+
+#include "bootrom.h"
+
+static uint32_t (* const otp_command)(uint32_t command, uint32_t value) = (void *)_BOOTROM_OTP_COMMAND;
+static uint32_t (* const otp_read)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_READ;
+static uint32_t (* const otp_write)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_WRITE;
+
+#endif
+
+/* otp_command(): defines for "command" */
+#define OTP_INIT 0x00000001
+#define OTP_CLOSE 0x00000002
+
+/* otp_{read,write}(): defines for "flags" */
+#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */
+#define OTP_UPPER_HALF 0x00000001
+#define OTP_NO_ECC 0x00000010 /* do not use ECC */
+#define OTP_LOCK 0x00000020 /* sets page protection bit for page */
+#define OTP_ACCESS_READ 0x00001000
+#define OTP_ACCESS_READWRITE 0x00002000
+
+/* Return values for all functions */
+#define OTP_SUCCESS 0x00000000
+#define OTP_MASTER_ERROR 0x001
+#define OTP_WRITE_ERROR 0x003
+#define OTP_READ_ERROR 0x005
+#define OTP_ACC_VIO_ERROR 0x009
+#define OTP_DATA_MULT_ERROR 0x011
+#define OTP_ECC_MULT_ERROR 0x021
+#define OTP_PREV_WR_ERROR 0x041
+#define OTP_DATA_SB_WARN 0x100
+#define OTP_ECC_SB_WARN 0x200
+
+/* Predefined otp pages: Factory Programmed Settings */
+#define FPS00 0x0004
+#define FPS01 0x0005
+#define FPS02 0x0006
+#define FPS03 0x0007
+#define FPS04 0x0008
+#define FPS05 0x0009
+#define FPS06 0x000A
+#define FPS07 0x000B
+#define FPS08 0x000C
+#define FPS09 0x000D
+#define FPS10 0x000E
+#define FPS11 0x000F
+
+/* Predefined otp pages: Customer Programmed Settings */
+#define CPS00 0x0010
+#define CPS01 0x0011
+#define CPS02 0x0012
+#define CPS03 0x0013
+#define CPS04 0x0014
+#define CPS05 0x0015
+#define CPS06 0x0016
+#define CPS07 0x0017
+
+/* Predefined otp pages: Pre-Boot Settings */
+#define PBS00 0x0018
+#define PBS01 0x0019
+#define PBS02 0x001A
+#define PBS03 0x001B
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/pll.h b/include/asm-blackfin/mach-common/bits/pll.h
new file mode 100644
index 0000000..9009f26
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/pll.h
@@ -0,0 +1,96 @@
+/*
+ * PLL Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PLL__
+#define __BFIN_PERIPHERAL_PLL__
+
+/* PLL_CTL Masks */
+#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF 0x0002 /* PLL Not Powered */
+#define STOPCK 0x0008 /* Core Clock Off */
+#define PDWN 0x0020 /* Enter Deep Sleep Mode */
+#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
+#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
+#define BYPASS 0x0100 /* Bypass the PLL */
+#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
+#define SPORT_HYST 0x8000 /* Enable Additional Hysteresis on SPORT Input Pins */
+
+/* PLL_DIV Masks */
+#define SSEL 0x000F /* System Select */
+#define CSEL 0x0030 /* Core Select */
+#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
+#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
+#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
+#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
+
+#define CCLK_DIV1 CSEL_DIV1
+#define CCLK_DIV2 CSEL_DIV2
+#define CCLK_DIV4 CSEL_DIV4
+#define CCLK_DIV8 CSEL_DIV8
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
+#define FULL_ON 0x0002 /* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
+#define DEEP_SLEEP 0x0008 /* Processor In Deep Sleep Mode */
+#define SLEEP 0x0010 /* Processor In Sleep Mode */
+#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
+#define CORE_IDLE 0x0040 /* Processor In IDLE Mode */
+#define VSTAT 0x0080 /* Voltage Regulator Has Reached Programmed Voltage */
+
+/* VR_CTL Masks */
+#ifdef __ADSPBF52x__
+#define FREQ_MASK 0x3000 /* Switching Oscillator Frequency For Regulator */
+#define FREQ_HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
+#define FREQ_1000 0x3000 /* Switching Frequency Is 1 MHz */
+#else
+#define FREQ_MASK 0x0003 /* Switching Oscillator Frequency For Regulator */
+#define FREQ_HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+#endif
+
+#define GAIN_MASK 0x000C /* Voltage Level Gain */
+#define GAIN_5 0x0000 /* GAIN = 5 */
+#define GAIN_10 0x0004 /* GAIN = 10 */
+#define GAIN_20 0x0008 /* GAIN = 20 */
+#define GAIN_50 0x000C /* GAIN = 50 */
+
+#ifdef __ADSPBF52x__
+#define VLEV_MASK 0x00F0 /* Internal Voltage Level */
+#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x0080 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x0090 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#else
+#define VLEV_MASK 0x00F0 /* Internal Voltage Level */
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+#endif
+
+#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
+#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
+#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
+#define GPWE 0x0400 /* General-purpose Wakeup From Hibernate */
+#define MXVRWE 0x0400 /* MXVR Wakeup From Hibernate */
+#define USBWE 0x0800 /* USB Wakeup From Hibernate */
+#define KPADWE 0x1000 /* Keypad Wakeup From Hibernate */
+#define ROTWE 0x2000 /* Rotary Counter Wakeup From Hibernate */
+#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
+#define CKELOW 0x8000 /* Enable Drive CKE Low During Reset */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ppi.h b/include/asm-blackfin/mach-common/bits/ppi.h
new file mode 100644
index 0000000..523f238
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ppi.h
@@ -0,0 +1,38 @@
+/*
+ * PPI Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PPI__
+#define __BFIN_PERIPHERAL_PPI__
+
+/* PPI_CONTROL Masks */
+#define PORT_EN 0x0001 /* PPI Port Enable */
+#define PORT_DIR 0x0002 /* PPI Port Direction */
+#define XFR_TYPE 0x000C /* PPI Transfer Type */
+#define PORT_CFG 0x0030 /* PPI Port Configuration */
+#define FLD_SEL 0x0040 /* PPI Active Field Select */
+#define PACK_EN 0x0080 /* PPI Packing Mode */
+#define DMA32 0x0100 /* PPI 32-bit DMA Enable */
+#define SKIP_EN 0x0200 /* PPI Skip Element Enable */
+#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
+#define DLENGTH 0x3800 /* PPI Data Length */
+#define DLEN_8 0x0000 /* Data Length = 8 Bits */
+#define DLEN_10 0x0800 /* Data Length = 10 Bits */
+#define DLEN_11 0x1000 /* Data Length = 11 Bits */
+#define DLEN_12 0x1800 /* Data Length = 12 Bits */
+#define DLEN_13 0x2000 /* Data Length = 13 Bits */
+#define DLEN_14 0x2800 /* Data Length = 14 Bits */
+#define DLEN_15 0x3000 /* Data Length = 15 Bits */
+#define DLEN_16 0x3800 /* Data Length = 16 Bits */
+#define POLC 0x4000 /* PPI Clock Polarity */
+#define POLS 0x8000 /* PPI Frame Sync Polarity */
+
+/* PPI_STATUS Masks */
+#define FLD 0x0400 /* Field Indicator */
+#define FT_ERR 0x0800 /* Frame Track Error */
+#define OVR 0x1000 /* FIFO Overflow Error */
+#define UNDR 0x2000 /* FIFO Underrun Error */
+#define ERR_DET 0x4000 /* Error Detected Indicator */
+#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/rtc.h b/include/asm-blackfin/mach-common/bits/rtc.h
new file mode 100644
index 0000000..f5a0cdb
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/rtc.h
@@ -0,0 +1,42 @@
+/*
+ * RTC Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_RTC__
+#define __BFIN_PERIPHERAL_RTC__
+
+/* RTC_STAT and RTC_ALARM Masks */
+#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */
+#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */
+#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */
+#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */
+
+#define RTC_SEC_P 0
+#define RTC_MIN_P 6
+#define RTC_HR_P 12
+#define RTC_DAY_P 17
+
+/*
+ * RTC_ALARM Macro
+ */
+#define SET_ALARM(day, hr, min, sec) \
+ ( (((day) << RTC_DAY_P) & RTC_DAY) | \
+ (((hr) << RTC_HR_P ) & RTC_HR ) | \
+ (((min) << RTC_MIN_P) & RTC_MIN) | \
+ (((sec) << RTC_SEC_P) & RTC_SEC) )
+
+/* RTC_ICTL and RTC_ISTAT Masks */
+#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */
+#define ALARM 0x0002 /* Alarm Interrupt Enable */
+#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */
+#define MINUTE 0x0008 /* Minutes Interrupt Enable */
+#define HOUR 0x0010 /* Hours Interrupt Enable */
+#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */
+#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
+#define WRITE_PENDING 0x4000 /* Write Pending Status */
+#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */
+
+/* RTC_FAST / RTC_PREN Mask */
+#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/spi.h b/include/asm-blackfin/mach-common/bits/spi.h
new file mode 100644
index 0000000..869dcb0
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/spi.h
@@ -0,0 +1,67 @@
+/*
+ * SPI Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_SPI__
+#define __BFIN_PERIPHERAL_SPI__
+
+/* SPI_CTL Masks */
+#define TIMOD 0x0003 /* Transfer Initiate Mode */
+#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
+#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
+#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
+#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
+#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
+#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
+#define PSSE 0x0010 /* Slave-Select Input Enable */
+#define EMISO 0x0020 /* Enable MISO As Output */
+#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
+#define LSBF 0x0200 /* LSB First */
+#define CPHA 0x0400 /* Clock Phase */
+#define CPOL 0x0800 /* Clock Polarity */
+#define MSTR 0x1000 /* Master/Slave* */
+#define WOM 0x2000 /* Write Open Drain Master */
+#define SPE 0x4000 /* SPI Enable */
+
+/* SPI_FLG Masks */
+#define FLS1 0x0002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2 0x0004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3 0x0008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4 0x0010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5 0x0020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6 0x0040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7 0x0080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1 0x0200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLG2 0x0400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3 0x0800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLG4 0x1000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLG5 0x2000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLG6 0x4000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLG7 0x8000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_FLG Bit Positions */
+#define FLS1_P 0x0001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2_P 0x0002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3_P 0x0003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4_P 0x0004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5_P 0x0005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6_P 0x0006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7_P 0x0007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1_P 0x0009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLG2_P 0x000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3_P 0x000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLG4_P 0x000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLG5_P 0x000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLG6_P 0x000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLG7_P 0x000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_STAT Masks */
+#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
+#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
+#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
+#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
+#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
+#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
+#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/sport.h b/include/asm-blackfin/mach-common/bits/sport.h
new file mode 100644
index 0000000..88e7a5d
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/sport.h
@@ -0,0 +1,89 @@
+/*
+ * SPORT Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_SPORT__
+#define __BFIN_PERIPHERAL_SPORT__
+
+/* SPORTx_TCR1 Masks */
+#define TSPEN 0x0001 /* TX enable */
+#define ITCLK 0x0002 /* Internal TX Clock Select */
+#define TDTYPE 0x000C /* TX Data Formatting Select */
+#define DTYPE_NORM 0x0004 /* Data Format Normal */
+#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
+#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
+#define TLSBIT 0x0010 /* TX Bit Order */
+#define ITFS 0x0200 /* Internal TX Frame Sync Select */
+#define TFSR 0x0400 /* TX Frame Sync Required Select */
+#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */
+#define LTFS 0x1000 /* Low TX Frame Sync Select */
+#define LATFS 0x2000 /* Late TX Frame Sync Select */
+#define TCKFE 0x4000 /* TX Clock Falling Edge Select */
+
+/* SPORTx_TCR2 Masks */
+#define SLEN 0x001F /* TX Word Length */
+#define TXSE 0x0100 /* TX Secondary Enable */
+#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */
+#define TRFST 0x0400 /* TX Right-First Data Order */
+
+/* SPORTx_RCR1 Masks */
+#define RSPEN 0x0001 /* RX enable */
+#define IRCLK 0x0002 /* Internal RX Clock Select */
+#define RDTYPE 0x000C /* RX Data Formatting Select */
+#define DTYPE_NORM 0x0004 /* Data Format Normal */
+#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
+#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
+#define RLSBIT 0x0010 /* RX Bit Order */
+#define IRFS 0x0200 /* Internal RX Frame Sync Select */
+#define RFSR 0x0400 /* RX Frame Sync Required Select */
+#define LRFS 0x1000 /* Low RX Frame Sync Select */
+#define LARFS 0x2000 /* Late RX Frame Sync Select */
+#define RCKFE 0x4000 /* RX Clock Falling Edge Select */
+
+/* SPORTx_RCR2 Masks */
+#define SLEN 0x001F /* RX Word Length */
+#define RXSE 0x0100 /* RX Secondary Enable */
+#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
+#define RRFST 0x0400 /* Right-First Data Order */
+
+/* SPORTx_STAT Masks */
+#define RXNE 0x0001 /* RX FIFO Not Empty Status */
+#define RUVF 0x0002 /* RX Underflow Status */
+#define ROVF 0x0004 /* RX Overflow Status */
+#define TXF 0x0008 /* TX FIFO Full Status */
+#define TUVF 0x0010 /* TX Underflow Status */
+#define TOVF 0x0020 /* TX Overflow Status */
+#define TXHRE 0x0040 /* TX Hold Register Empty */
+
+/* SPORTx_MCMC1 Masks */
+#define WSIZE 0xF000 /* Multichannel Window Size Field */
+#define WOFF 0x03FF /* Multichannel Window Offset Field */
+
+/* SPORTx_MCMC2 Masks */
+#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */
+#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
+#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
+#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
+#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
+#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
+#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
+#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
+#define MFD 0xF000 /* Multichannel Frame Delay */
+#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
+#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
+#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
+#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
+#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
+#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
+#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
+#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
+#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
+#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
+#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
+#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
+#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
+#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
+#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
+#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/timer.h b/include/asm-blackfin/mach-common/bits/timer.h
new file mode 100644
index 0000000..9513f80
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/timer.h
@@ -0,0 +1,78 @@
+/*
+ * General Purpose Timer Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_TIMER__
+#define __BFIN_PERIPHERAL_TIMER__
+
+/* TIMER_ENABLE Masks */
+#define TIMEN0 0x0001 /* Enable Timer 0 */
+#define TIMEN1 0x0002 /* Enable Timer 1 */
+#define TIMEN2 0x0004 /* Enable Timer 2 */
+#define TIMEN3 0x0008 /* Enable Timer 3 */
+#define TIMEN4 0x0010 /* Enable Timer 4 */
+#define TIMEN5 0x0020 /* Enable Timer 5 */
+#define TIMEN6 0x0040 /* Enable Timer 6 */
+#define TIMEN7 0x0080 /* Enable Timer 7 */
+
+/* TIMER_DISABLE Masks */
+#define TIMDIS0 TIMEN0 /* Disable Timer 0 */
+#define TIMDIS1 TIMEN1 /* Disable Timer 1 */
+#define TIMDIS2 TIMEN2 /* Disable Timer 2 */
+#define TIMDIS3 TIMEN3 /* Disable Timer 3 */
+#define TIMDIS4 TIMEN4 /* Disable Timer 4 */
+#define TIMDIS5 TIMEN5 /* Disable Timer 5 */
+#define TIMDIS6 TIMEN6 /* Disable Timer 6 */
+#define TIMDIS7 TIMEN7 /* Disable Timer 7 */
+
+/* TIMER_STATUS Masks */
+#define TIMIL0 0x00000001 /* Timer 0 Interrupt */
+#define TIMIL1 0x00000002 /* Timer 1 Interrupt */
+#define TIMIL2 0x00000004 /* Timer 2 Interrupt */
+#define TIMIL3 0x00000008 /* Timer 3 Interrupt */
+#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
+#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
+#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
+#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */
+#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
+#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
+#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
+#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
+#define TIMIL4 0x00010000 /* Timer 4 Interrupt */
+#define TIMIL5 0x00020000 /* Timer 5 Interrupt */
+#define TIMIL6 0x00040000 /* Timer 6 Interrupt */
+#define TIMIL7 0x00080000 /* Timer 7 Interrupt */
+#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */
+#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */
+#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */
+#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */
+#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
+#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
+#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
+#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+
+/* TIMERx_CONFIG Masks */
+#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
+#define WDTH_CAP 0x0002 /* Width Capture Input Mode */
+#define EXT_CLK 0x0003 /* External Clock Mode */
+#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
+#define PERIOD_CNT 0x0008 /* Period Count */
+#define IRQ_ENA 0x0010 /* Interrupt Request Enable */
+#define TIN_SEL 0x0020 /* Timer Input Select */
+#define OUT_DIS 0x0040 /* Output Pad Disable */
+#define CLK_SEL 0x0080 /* Timer Clock Select */
+#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
+#define EMU_RUN 0x0200 /* Emulation Behavior Select */
+#define ERR_TYP 0xC000 /* Error Type */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/trace.h b/include/asm-blackfin/mach-common/bits/trace.h
new file mode 100644
index 0000000..13e2134
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/trace.h
@@ -0,0 +1,19 @@
+/*
+ * Trace Unit Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_TRACE__
+#define __BFIN_PERIPHERAL_TRACE__
+
+/* Trace Buffer Control (TBUFCTL) Register Masks */
+#define TBUFPWR 0x00000001
+#define TBUFEN 0x00000002
+#define TBUFOVF 0x00000004
+#define CMPLB_SINGLE 0x00000008
+#define CMPLP_DOUBLE 0x00000010
+#define CMPLB (CMPLB_SINGLE | CMPLP_DOUBLE)
+
+/* Trace Buffer Status (TBUFSTAT) Register Masks */
+#define TBUFCNT 0x0000001F
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/twi.h b/include/asm-blackfin/mach-common/bits/twi.h
new file mode 100644
index 0000000..8fa7d9f
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/twi.h
@@ -0,0 +1,77 @@
+/*
+ * TWI Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_TWI__
+#define __BFIN_PERIPHERAL_TWI__
+
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
+#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
+#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
+
+/* TWI_PRESCALE Masks */
+#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
+#define TWI_ENA 0x0080 /* TWI Enable */
+#define SCCB 0x0200 /* SCCB Compatibility Enable */
+
+/* TWI_SLAVE_CTL Masks */
+#define SEN 0x0001 /* Slave Enable */
+#define SADD_LEN 0x0002 /* Slave Address Length */
+#define STDVAL 0x0004 /* Slave Transmit Data Valid */
+#define TSC_NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
+#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+
+/* TWI_SLAVE_STAT Masks */
+#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
+#define GCALL 0x0002 /* General Call Indicator */
+
+/* TWI_MASTER_CTRL Masks */
+#define MEN 0x0001 /* Master Mode Enable */
+#define MADD_LEN 0x0002 /* Master Address Length */
+#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
+#define FAST 0x0008 /* Use Fast Mode Timing Specs */
+#define STOP 0x0010 /* Issue Stop Condition */
+#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
+#define DCNT 0x3FC0 /* Data Bytes To Transfer */
+#define SDAOVR 0x4000 /* Serial Data Override */
+#define SCLOVR 0x8000 /* Serial Clock Override */
+
+/* TWI_MASTER_STAT Masks */
+#define MPROG 0x0001 /* Master Transfer In Progress */
+#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
+#define ANAK 0x0004 /* Address Not Acknowledged */
+#define DNAK 0x0008 /* Data Not Acknowledged */
+#define BUFRDERR 0x0010 /* Buffer Read Error */
+#define BUFWRERR 0x0020 /* Buffer Write Error */
+#define SDASEN 0x0040 /* Serial Data Sense */
+#define SCLSEN 0x0080 /* Serial Clock Sense */
+#define BUSBUSY 0x0100 /* Bus Busy Indicator */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
+#define SINIT 0x0001 /* Slave Transfer Initiated */
+#define SCOMP 0x0002 /* Slave Transfer Complete */
+#define SERR 0x0004 /* Slave Transfer Error */
+#define SOVF 0x0008 /* Slave Overflow */
+#define MCOMP 0x0010 /* Master Transfer Complete */
+#define MERR 0x0020 /* Master Transfer Error */
+#define XMTSERV 0x0040 /* Transmit FIFO Service */
+#define RCVSERV 0x0080 /* Receive FIFO Service */
+
+/* TWI_FIFO_CTRL Masks */
+#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
+#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
+#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
+#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
+
+/* TWI_FIFO_STAT Masks */
+#define XMTSTAT 0x0003 /* Transmit FIFO Status */
+#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
+#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
+#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
+
+#define RCVSTAT 0x000C /* Receive FIFO Status */
+#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
+#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
+#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/uart.h b/include/asm-blackfin/mach-common/bits/uart.h
new file mode 100644
index 0000000..ac1ba11
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/uart.h
@@ -0,0 +1,98 @@
+/*
+ * UART Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_UART__
+#define __BFIN_PERIPHERAL_UART__
+
+/* UARTx_LCR Masks */
+#define WLS 0x03 /* Word Length Select */
+#define WLS_5 0x00 /* 5 bit word */
+#define WLS_6 0x01 /* 6 bit word */
+#define WLS_7 0x02 /* 7 bit word */
+#define WLS_8 0x03 /* 8 bit word */
+#define STB 0x04 /* Stop Bits */
+#define PEN 0x08 /* Parity Enable */
+#define EPS 0x10 /* Even Parity Select */
+#define STP 0x20 /* Stick Parity */
+#define SB 0x40 /* Set Break */
+#define DLAB 0x80 /* Divisor Latch Access */
+
+#define DLAB_P 0x07
+#define SB_P 0x06
+#define STP_P 0x05
+#define EPS_P 0x04
+#define PEN_P 0x03
+#define STB_P 0x02
+#define WLS_P1 0x01
+#define WLS_P0 0x00
+
+/* UARTx_MCR Mask */
+#define XOFF 0x01 /* Transmitter off */
+#define MRTS 0x02 /* Manual Request to Send */
+#define RFIT 0x04 /* Receive FIFO IRQ Threshold */
+#define RFRT 0x08 /* Receive FIFO RTS Threshold */
+#define LOOP_ENA 0x10 /* Loopback Mode Enable */
+#define FCPOL 0x20 /* Flow Control Pin Polarity */
+#define ARTS 0x40 /* Auto RTS generation for RX handshake */
+#define ACTS 0x80 /* Auto CTS operation for TX handshake */
+
+#define XOFF_P 0
+#define MRTS_P 1
+#define RFIT_P 2
+#define RFRT_P 3
+#define LOOP_ENA_P 4
+#define FCPOL_P 5
+#define ARTS_P 6
+#define ACTS_P 7
+
+/* UARTx_LSR Masks */
+#define DR 0x01 /* Data Ready */
+#define OE 0x02 /* Overrun Error */
+#define PE 0x04 /* Parity Error */
+#define FE 0x08 /* Framing Error */
+#define BI 0x10 /* Break Interrupt */
+#define THRE 0x20 /* THR Empty */
+#define TEMT 0x40 /* TSR and UART_THR Empty */
+
+#define DR_P 0x00
+#define OE_P 0x01
+#define PE_P 0x02
+#define FE_P 0x03
+#define BI_P 0x04
+#define THRE_P 0x05
+#define TEMT_P 0x06
+
+/* UARTx_IER Masks */
+#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
+#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
+#define ELSI 0x04 /* Enable RX Status Interrupt */
+
+#define ERBFI_P 0x00
+#define ETBEI_P 0x01
+#define ELSI_P 0x02
+
+/* UARTx_IIR Masks */
+#define NINT 0x01 /* Pending Interrupt */
+#define STATUS 0x06 /* Highest Priority Pending Interrupt */
+
+#define NINT_P 0x00
+#define STATUS_P0 0x01
+#define STATUS_P1 0x02
+
+/* UARTx_GCTL Masks */
+#define UCEN 0x01 /* Enable UARTx Clocks */
+#define IREN 0x02 /* Enable IrDA Mode */
+#define TPOLC 0x04 /* IrDA TX Polarity Change */
+#define RPOLC 0x08 /* IrDA RX Polarity Change */
+#define FPE 0x10 /* Force Parity Error On Transmit */
+#define FFE 0x20 /* Force Framing Error On Transmit */
+
+#define UCEN_P 0x00
+#define IREN_P 0x01
+#define TPOLC_P 0x02
+#define RPOLC_P 0x03
+#define FPE_P 0x04
+#define FFE_P 0x05
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/watchdog.h b/include/asm-blackfin/mach-common/bits/watchdog.h
new file mode 100644
index 0000000..75924f9
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/watchdog.h
@@ -0,0 +1,19 @@
+/*
+ * Watchdog Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_WATCHDOG__
+#define __BFIN_PERIPHERAL_WATCHDOG__
+
+/* Watchdog Timer WDOG_CTL Register Masks */
+
+#define WDEV 0x0006 /* event generated on roll over */
+#define WDEV_RESET 0x0000 /* generate reset event on roll over */
+#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
+#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
+#define WDEV_NONE 0x0006 /* no event on roll over */
+#define WDEN 0x0FF0 /* enable watchdog */
+#define WDDIS 0x0AD0 /* disable watchdog */
+#define WDRO 0x8000 /* watchdog rolled over latch */
+
+#endif