1 files changed, 0 insertions, 169 deletions
diff --git a/include/asm-blackfin/config.h b/include/asm-blackfin/config.h
deleted file mode 100644
index 7455685..0000000
--- a/include/asm-blackfin/config.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * config.h - setup common defines for Blackfin boards based on config.h
- *
- * Copyright (c) 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __ASM_BLACKFIN_CONFIG_POST_H__
-#define __ASM_BLACKFIN_CONFIG_POST_H__
-
-/* Sanity check CONFIG_BFIN_CPU */
-#ifndef CONFIG_BFIN_CPU
-# error CONFIG_BFIN_CPU: your board config needs to define this
-#endif
-
-#ifndef CONFIG_BFIN_SCRATCH_REG
-# define CONFIG_BFIN_SCRATCH_REG retn
-#endif
-
-/* Relocation to SDRAM works on all Blackfin boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
-/* Make sure the structure is properly aligned */
-#if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
-# error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned
-#endif
-
-/* Set default CONFIG_VCO_HZ if need be */
-#if !defined(CONFIG_VCO_HZ)
-# if (CONFIG_CLKIN_HALF == 0)
-#  define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
-# else
-#  define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / 2)
-# endif
-#endif
-
-/* Set default CONFIG_CCLK_HZ if need be */
-#if !defined(CONFIG_CCLK_HZ)
-# if (CONFIG_PLL_BYPASS == 0)
-#  define CONFIG_CCLK_HZ (CONFIG_VCO_HZ / CONFIG_CCLK_DIV)
-# else
-#  define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
-# endif
-#endif
-
-/* Set default CONFIG_SCLK_HZ if need be */
-#if !defined(CONFIG_SCLK_HZ)
-# if (CONFIG_PLL_BYPASS == 0)
-#  define CONFIG_SCLK_HZ (CONFIG_VCO_HZ / CONFIG_SCLK_DIV)
-# else
-#  define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
-# endif
-#endif
-
-/* Since we use these to program PLL registers directly,
- * make sure the values are sane and won't screw us up.
- */
-#if (CONFIG_VCO_MULT & 0x3F) != CONFIG_VCO_MULT
-# error CONFIG_VCO_MULT: Invalid value: must fit in 6 bits (0 - 63)
-#endif
-#if (CONFIG_CLKIN_HALF & 0x1) != CONFIG_CLKIN_HALF
-# error CONFIG_CLKIN_HALF: Invalid value: must be 0 or 1
-#endif
-#if (CONFIG_PLL_BYPASS & 0x1) != CONFIG_PLL_BYPASS
-# error CONFIG_PLL_BYPASS: Invalid value: must be 0 or 1
-#endif
-
-/* If we are using KGDB, make sure we defer exceptions */
-#ifdef CONFIG_CMD_KGDB
-# define CONFIG_EXCEPTION_DEFER	1
-#endif
-
-/* Using L1 scratch pad makes sense for everyone by default. */
-#ifndef CONFIG_LINUX_CMDLINE_ADDR
-# define CONFIG_LINUX_CMDLINE_ADDR L1_SRAM_SCRATCH
-#endif
-#ifndef CONFIG_LINUX_CMDLINE_SIZE
-# define CONFIG_LINUX_CMDLINE_SIZE L1_SRAM_SCRATCH_SIZE
-#endif
-
-/* Set default SPI flash CS to the one we boot from */
-#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_SPI_CS)
-# define CONFIG_ENV_SPI_CS BFIN_BOOT_SPI_SSEL
-#endif
-
-/* We need envcrc to embed the env into LDRs */
-#ifdef CONFIG_ENV_IS_EMBEDDED_IN_LDR
-# define CONFIG_BUILD_ENVCRC
-#endif
-
-/* Default/common Blackfin memory layout */
-#ifndef CONFIG_SYS_SDRAM_BASE
-# define CONFIG_SYS_SDRAM_BASE 0
-#endif
-#ifndef CONFIG_SYS_MAX_RAM_SIZE
-# define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024)
-#endif
-#ifndef CONFIG_SYS_MONITOR_BASE
-# if CONFIG_SYS_MAX_RAM_SIZE
-#  define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
-# else
-#  define CONFIG_SYS_MONITOR_BASE 0
-# endif
-#endif
-#ifndef CONFIG_SYS_MALLOC_BASE
-# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#endif
-#ifndef CONFIG_SYS_GBL_DATA_SIZE
-# define CONFIG_SYS_GBL_DATA_SIZE (128)
-#endif
-#ifndef CONFIG_SYS_GBL_DATA_ADDR
-# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#endif
-#ifndef CONFIG_STACKBASE
-# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4)
-#endif
-#ifndef CONFIG_SYS_MEMTEST_START
-# define CONFIG_SYS_MEMTEST_START 0
-#endif
-#ifndef CONFIG_SYS_MEMTEST_END
-# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4)
-#endif
-
-/* Check to make sure everything fits in external RAM */
-#if CONFIG_SYS_MAX_RAM_SIZE && \
-    ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
-# error Memory Map does not fit into configuration
-#endif
-
-/* Default/common Blackfin environment settings */
-#ifndef CONFIG_LOADADDR
-# define CONFIG_LOADADDR 0x1000000
-#endif
-#ifndef CONFIG_SYS_LOAD_ADDR
-# define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#endif
-#ifndef CONFIG_SYS_BOOTM_LEN
-# define CONFIG_SYS_BOOTM_LEN 0x4000000
-#endif
-#ifndef CONFIG_SYS_PROMPT
-# define CONFIG_SYS_PROMPT "bfin> "
-#endif
-#ifndef CONFIG_SYS_CBSIZE
-# define CONFIG_SYS_CBSIZE 1024
-#elif defined(CONFIG_CMD_KGDB) && CONFIG_SYS_CBSIZE < 1024
-# error "kgdb needs cbsize to be >= 1024"
-#endif
-#ifndef CONFIG_SYS_BARGSIZE
-# define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#endif
-#ifndef CONFIG_SYS_PBSIZE
-# define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#endif
-#ifndef CONFIG_SYS_MAXARGS
-# define CONFIG_SYS_MAXARGS 16
-#endif
-#if defined(CONFIG_SYS_HZ)
-# if (CONFIG_SYS_HZ != 1000)
-#  warning "CONFIG_SYS_HZ must always be 1000"
-# endif
-# undef CONFIG_SYS_HZ
-#endif
-#define CONFIG_SYS_HZ 1000
-#ifndef CONFIG_SYS_BAUDRATE_TABLE
-# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#endif
-
-#endif