diff options
Diffstat (limited to 'include/asm-arm')
| -rw-r--r-- | include/asm-arm/arch-arm720t/hardware.h | 39 | ||||
| -rw-r--r-- | include/asm-arm/arch-arm720t/s3c4510b.h | 231 |
2 files changed, 270 insertions, 0 deletions
diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h new file mode 100644 index 0000000..5064697 --- /dev/null +++ b/include/asm-arm/arch-arm720t/hardware.h @@ -0,0 +1,39 @@ +#ifndef __ARM7_HW_H +#define __ARM7_HW_H + +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#if defined(CONFIG_S3C4510B) +#include <asm-arm/arch-arm720t/s3c4510b.h> +#elif defined(CONFIG_NETARM) +#include <asm-arm/arch-arm720t/netarm_registers.h> +#elif defined(CONFIG_IMPA7) +/* include IMPA7 specific hardware file if there was one */ +#elif defined(CONFIG_EP7312) +/* include EP7312 specific hardware file if there was one */ +#else +#error No hardware file defined for this configuration +#endif + +#endif /* __ARM7_HW_H */ diff --git a/include/asm-arm/arch-arm720t/s3c4510b.h b/include/asm-arm/arch-arm720t/s3c4510b.h new file mode 100644 index 0000000..7acbec4 --- /dev/null +++ b/include/asm-arm/arch-arm720t/s3c4510b.h @@ -0,0 +1,231 @@ +#ifndef __HW_S3C4510_H +#define __HW_S3C4510_H + +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Description: Samsung S3C4510B register layout + */ + +/*------------------------------------------------------------------------ + * ASIC Address Definition + *----------------------------------------------------------------------*/ + +/* L1 8KB on chip SRAM base address */ +#define SRAM_BASE (0x03fe0000) + +/* Special Register Start Address After System Reset */ +#define REG_BASE (0x03ff0000) +#define SPSTR (REG_BASE) + +/* *********************** */ +/* System Manager Register */ +/* *********************** */ +#define REG_SYSCFG (REG_BASE+0x0000) + +#define REG_CLKCON (REG_BASE+0x3000) +#define REG_EXTACON0 (REG_BASE+0x3008) +#define REG_EXTACON1 (REG_BASE+0x300c) +#define REG_EXTDBWTH (REG_BASE+0x3010) +#define REG_ROMCON0 (REG_BASE+0x3014) +#define REG_ROMCON1 (REG_BASE+0x3018) +#define REG_ROMCON2 (REG_BASE+0x301c) +#define REG_ROMCON3 (REG_BASE+0x3020) +#define REG_ROMCON4 (REG_BASE+0x3024) +#define REG_ROMCON5 (REG_BASE+0x3028) +#define REG_DRAMCON0 (REG_BASE+0x302c) +#define REG_DRAMCON1 (REG_BASE+0x3030) +#define REG_DRAMCON2 (REG_BASE+0x3034) +#define REG_DRAMCON3 (REG_BASE+0x3038) +#define REG_REFEXTCON (REG_BASE+0x303c) + +/* *********************** */ +/* Ethernet BDMA Register */ +/* *********************** */ +#define REG_BDMATXCON (REG_BASE+0x9000) +#define REG_BDMARXCON (REG_BASE+0x9004) +#define REG_BDMATXPTR (REG_BASE+0x9008) +#define REG_BDMARXPTR (REG_BASE+0x900c) +#define REG_BDMARXLSZ (REG_BASE+0x9010) +#define REG_BDMASTAT (REG_BASE+0x9014) + +/* Content Address Memory */ +#define REG_CAM_BASE (REG_BASE+0x9100) + +#define REG_BDMATXBUF (REG_BASE+0x9200) +#define REG_BDMARXBUF (REG_BASE+0x9800) + +/* *********************** */ +/* Ethernet MAC Register */ +/* *********************** */ +#define REG_MACCON (REG_BASE+0xa000) +#define REG_CAMCON (REG_BASE+0xa004) +#define REG_MACTXCON (REG_BASE+0xa008) +#define REG_MACTXSTAT (REG_BASE+0xa00c) +#define REG_MACRXCON (REG_BASE+0xa010) +#define REG_MACRXSTAT (REG_BASE+0xa014) +#define REG_STADATA (REG_BASE+0xa018) +#define REG_STACON (REG_BASE+0xa01c) +#define REG_CAMEN (REG_BASE+0xa028) +#define REG_EMISSCNT (REG_BASE+0xa03c) +#define REG_EPZCNT (REG_BASE+0xa040) +#define REG_ERMPZCNT (REG_BASE+0xa044) +#define REG_ETXSTAT (REG_BASE+0x9040) +#define REG_MACRXDESTR (REG_BASE+0xa064) +#define REG_MACRXSTATEM (REG_BASE+0xa090) +#define REG_MACRXFIFO (REG_BASE+0xa200) + +/********************/ +/* I2C Bus Register */ +/********************/ +#define REG_I2C_CON (REG_BASE+0xf000) +#define REG_I2C_BUF (REG_BASE+0xf004) +#define REG_I2C_PS (REG_BASE+0xf008) +#define REG_I2C_COUNT (REG_BASE+0xf00c) + +/********************/ +/* GDMA 0 */ +/********************/ +#define REG_GDMACON0 (REG_BASE+0xb000) +#define REG_GDMA0_RUN_ENABLE (REG_BASE+0xb020) +#define REG_GDMASRC0 (REG_BASE+0xb004) +#define REG_GDMADST0 (REG_BASE+0xb008) +#define REG_GDMACNT0 (REG_BASE+0xb00c) + +/********************/ +/* GDMA 1 */ +/********************/ +#define REG_GDMACON1 (REG_BASE+0xc000) +#define REG_GDMA1_RUN_ENABLE (REG_BASE+0xc020) +#define REG_GDMASRC1 (REG_BASE+0xc004) +#define REG_GDMADST1 (REG_BASE+0xc008) +#define REG_GDMACNT1 (REG_BASE+0xc00c) + +/********************/ +/* UART 0 */ +/********************/ +#define UART0_BASE (REG_BASE+0xd000) +#define REG_UART0_LCON (REG_BASE+0xd000) +#define REG_UART0_CTRL (REG_BASE+0xd004) +#define REG_UART0_STAT (REG_BASE+0xd008) +#define REG_UART0_TXB (REG_BASE+0xd00c) +#define REG_UART0_RXB (REG_BASE+0xd010) +#define REG_UART0_BAUD_DIV (REG_BASE+0xd014) +#define REG_UART0_BAUD_CNT (REG_BASE+0xd018) +#define REG_UART0_BAUD_CLK (REG_BASE+0xd01C) + +/********************/ +/* UART 1 */ +/********************/ +#define UART1_BASE (REG_BASE+0xe000) +#define REG_UART1_LCON (REG_BASE+0xe000) +#define REG_UART1_CTRL (REG_BASE+0xe004) +#define REG_UART1_STAT (REG_BASE+0xe008) +#define REG_UART1_TXB (REG_BASE+0xe00c) +#define REG_UART1_RXB (REG_BASE+0xe010) +#define REG_UART1_BAUD_DIV (REG_BASE+0xe014) +#define REG_UART1_BAUD_CNT (REG_BASE+0xe018) +#define REG_UART1_BAUD_CLK (REG_BASE+0xe01C) + +/********************/ +/* Timer Register */ +/********************/ +#define REG_TMOD (REG_BASE+0x6000) +#define REG_TDATA0 (REG_BASE+0x6004) +#define REG_TDATA1 (REG_BASE+0x6008) +#define REG_TCNT0 (REG_BASE+0x600c) +#define REG_TCNT1 (REG_BASE+0x6010) + +/**********************/ +/* I/O Port Interface */ +/**********************/ +#define REG_IOPMODE (REG_BASE+0x5000) +#define REG_IOPCON (REG_BASE+0x5004) +#define REG_IOPDATA (REG_BASE+0x5008) + +/*********************************/ +/* Interrupt Controller Register */ +/*********************************/ +#define REG_INTMODE (REG_BASE+0x4000) +#define REG_INTPEND (REG_BASE+0x4004) +#define REG_INTMASK (REG_BASE+0x4008) + +#define REG_INTPRI0 (REG_BASE+0x400c) +#define REG_INTPRI1 (REG_BASE+0x4010) +#define REG_INTPRI2 (REG_BASE+0x4014) +#define REG_INTPRI3 (REG_BASE+0x4018) +#define REG_INTPRI4 (REG_BASE+0x401c) +#define REG_INTPRI5 (REG_BASE+0x4020) +#define REG_INTOFFSET (REG_BASE+0x4024) +#define REG_INTPNDPRI (REG_BASE+0x4028) +#define REG_INTPNDTST (REG_BASE+0x402C) + +/*********************************/ +/* CACHE CONTROL MASKS */ +/*********************************/ +#define CACHE_STALL (0x00000001) +#define CACHE_ENABLE (0x00000002) +#define CACHE_WRITE_BUFF (0x00000004) +#define CACHE_MODE (0x00000030) +#define CACHE_MODE_00 (0x00000000) +#define CACHE_MODE_01 (0x00000010) +#define CACHE_MODE_10 (0x00000020) + +/*********************************/ +/* CACHE RAM BASE ADDRESSES */ +/*********************************/ +#define CACHE_SET0_RAM (0x10000000) +#define CACHE_SET1_RAM (0x10800000) +#define CACHE_TAG_RAM (0x11000000) + +/*********************************/ +/* CACHE_DISABLE MASK */ +/*********************************/ +#define CACHE_DISABLE_MASK (0x04000000) + +#define GET_REG(reg) (*((volatile u32 *)(reg))) +#define PUT_REG(reg, val) (*((volatile u32 *)(reg)) = ((u32)(val))) +#define SET_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) | mask)) +#define CLR_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) & ~mask)) +#define PUT_U16(reg, val) (*((volatile u16 *)(reg)) = ((u16)(val))) +#define PUT__U8(reg, val) (*((volatile u8 *)(reg)) = (( u8)((val)&0xFF))) +#define GET__U8(reg) (*((volatile u8 *)(reg))) + +/***********************************/ +/* CLOCK CONSTANTS -- 50 MHz Clock */ +/***********************************/ + +#define CLK_FREQ_MHZ (50) +#define t_data_us(t) ((t)*CLK_FREQ_MHZ-1) /* t is time tick,unit[us] */ +#define t_data_ms(t) (t_data_us((t)*1000)) /* t is time tick,unit[ms] */ + +/*********************************************************/ +/* TIMER MODE REGISTER */ +/*********************************************************/ +#define TM0_RUN 0x01 /* Timer 0 enable */ +#define TM0_TOGGLE 0x02 /* 0, interval mode */ +#define TM0_OUT_1 0x04 /* Timer 0 Initial TOUT0 value */ +#define TM1_RUN 0x08 /* Timer 1 enable */ +#define TM1_TOGGLE 0x10 /* 0, interval mode */ +#define TM1_OUT_1 0x20 /* Timer 0 Initial TOUT0 value */ + +#endif /* __S3C4510_h */ |