diff options
Diffstat (limited to 'include/asm-arm')
| -rw-r--r-- | include/asm-arm/arch-pxa/pxa-regs.h | 746 |
1 files changed, 561 insertions, 185 deletions
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index a59838c..41d37d7 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -22,18 +22,17 @@ /* FIXME hack so that SA-1111.h will work [cb] */ #ifndef __ASSEMBLY__ -typedef unsigned short Word16 ; -typedef unsigned int Word32 ; -typedef Word32 Word ; -typedef Word Quad [4] ; -typedef void *Address ; -typedef void (*ExcpHndlr) (void) ; +typedef unsigned short Word16 ; +typedef unsigned int Word32 ; +typedef Word32 Word ; +typedef Word Quad [4] ; +typedef void *Address ; +typedef void (*ExcpHndlr) (void) ; #endif /* * PXA Chip selects */ - #define PXA_CS0_PHYS 0x00000000 #define PXA_CS1_PHYS 0x04000000 #define PXA_CS2_PHYS 0x08000000 @@ -41,50 +40,46 @@ typedef void (*ExcpHndlr) (void) ; #define PXA_CS4_PHYS 0x10000000 #define PXA_CS5_PHYS 0x14000000 - /* * Personal Computer Memory Card International Association (PCMCIA) sockets */ - #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ +#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ +#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ +#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ +#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ +#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ +#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ +#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ +#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ +#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ +#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ +#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ +#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ +#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ (_PCMCIA (Nb) + 3*PCMCIAPrtSp) -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ +#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ +#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ +#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ +#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ +#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ +#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ +#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ +#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ /* * DMA Controller */ - #define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ #define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ #define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ @@ -107,6 +102,17 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ + +#if defined(CONFIG_PXA27X) +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_ENRINTR (1 << 9) /* The end of Receive */ +#endif + #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ #define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ @@ -156,6 +162,10 @@ typedef void (*ExcpHndlr) (void) ; #define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ #define DRCMR39 __REG(0x4000019C) /* Reserved */ +#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ +#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ +#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ + #define DRCMRRXSADR DRCMR2 #define DRCMRTXSADR DRCMR3 #define DRCMRRXBTRBR DRCMR4 @@ -252,11 +262,11 @@ typedef void (*ExcpHndlr) (void) ; #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ #define DDADR_STOP (1 << 0) /* Stop (read / write) */ -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ #define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ #define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ #define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ #define DCMD_BURST8 (1 << 16) /* 8 byte burst */ @@ -272,11 +282,9 @@ typedef void (*ExcpHndlr) (void) ; #define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) #define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) - /* * UARTs */ - /* Full Function UART (FFUART) */ #define FFUART FFRBR #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ @@ -417,19 +425,24 @@ typedef void (*ExcpHndlr) (void) ; /* * I2C registers */ - #define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ #define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ #define ICR __REG(0x40301690) /* I2C Control Register - ICR */ #define ISR __REG(0x40301698) /* I2C Status Register - ISR */ #define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ +#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ +#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ +#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ +#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ +#define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */ + /* ----- Control register bits ---------------------------------------- */ #define ICR_START 0x1 /* start bit */ #define ICR_STOP 0x2 /* stop bit */ #define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ -#define ICR_TB 0x8 /* transfer byte bit */ +#define ICR_TB 0x8 /* transfer byte bit */ #define ICR_MA 0x10 /* master abort */ #define ICR_SCLE 0x20 /* master clock enable */ #define ICR_IUE 0x40 /* unit enable */ @@ -438,33 +451,31 @@ typedef void (*ExcpHndlr) (void) ; #define ICR_IRFIE 0x200 /* enable rx interrupts */ #define ICR_BEIE 0x400 /* enable bus error ints */ #define ICR_SSDIE 0x800 /* slave STOP detected int enable */ -#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ +#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ #define ICR_SADIE 0x2000 /* slave address detected int enable */ #define ICR_UR 0x4000 /* unit reset */ #define ICR_FM 0x8000 /* Fast Mode */ /* ----- Status register bits ----------------------------------------- */ -#define ISR_RWM 0x1 /* read/write mode */ -#define ISR_ACKNAK 0x2 /* ack/nak status */ -#define ISR_UB 0x4 /* unit busy */ -#define ISR_IBB 0x8 /* bus busy */ -#define ISR_SSD 0x10 /* slave stop detected */ -#define ISR_ALD 0x20 /* arbitration loss detected */ -#define ISR_ITE 0x40 /* tx buffer empty */ -#define ISR_IRF 0x80 /* rx buffer full */ -#define ISR_GCAD 0x100 /* general call address detected */ -#define ISR_SAD 0x200 /* slave address detected */ -#define ISR_BED 0x400 /* bus error no ACK/NAK */ +#define ISR_RWM 0x1 /* read/write mode */ +#define ISR_ACKNAK 0x2 /* ack/nak status */ +#define ISR_UB 0x4 /* unit busy */ +#define ISR_IBB 0x8 /* bus busy */ +#define ISR_SSD 0x10 /* slave stop detected */ +#define ISR_ALD 0x20 /* arbitration loss detected */ +#define ISR_ITE 0x40 /* tx buffer empty */ +#define ISR_IRF 0x80 /* rx buffer full */ +#define ISR_GCAD 0x100 /* general call address detected */ +#define ISR_SAD 0x200 /* slave address detected */ +#define ISR_BED 0x400 /* bus error no ACK/NAK */ /* * Serial Audio Controller */ - - /* FIXME the audio defines collide w/ the SA1111 defines. I don't like these - * short defines because there is too much chance of namespace collision */ - + * short defines because there is too much chance of namespace collision + */ /*#define SACR0 __REG(0x40400000) / Global Control Register */ /*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ /*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ @@ -477,7 +488,6 @@ typedef void (*ExcpHndlr) (void) ; /* * AC97 Controller registers */ - #define POCR __REG(0x40500000) /* PCM Out Control Register */ #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ @@ -551,7 +561,6 @@ typedef void (*ExcpHndlr) (void) ; #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ - /* * USB Device Controller */ @@ -710,11 +719,63 @@ typedef void (*ExcpHndlr) (void) ; #define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ +#if defined(CONFIG_PXA27X) +/* + * USB Host Controller + */ +#define UHCREV __REG(0x4C000000) +#define UHCHCON __REG(0x4C000004) +#define UHCCOMS __REG(0x4C000008) +#define UHCINTS __REG(0x4C00000C) +#define UHCINTE __REG(0x4C000010) +#define UHCINTD __REG(0x4C000014) +#define UHCHCCA __REG(0x4C000018) +#define UHCPCED __REG(0x4C00001C) +#define UHCCHED __REG(0x4C000020) +#define UHCCCED __REG(0x4C000024) +#define UHCBHED __REG(0x4C000028) +#define UHCBCED __REG(0x4C00002C) +#define UHCDHEAD __REG(0x4C000030) +#define UHCFMI __REG(0x4C000034) +#define UHCFMR __REG(0x4C000038) +#define UHCFMN __REG(0x4C00003C) +#define UHCPERS __REG(0x4C000040) +#define UHCLST __REG(0x4C000044) +#define UHCRHDA __REG(0x4C000048) +#define UHCRHDB __REG(0x4C00004C) +#define UHCRHS __REG(0x4C000050) +#define UHCRHPS1 __REG(0x4C000054) +#define UHCRHPS2 __REG(0x4C000058) +#define UHCRHPS3 __REG(0x4C00005C) +#define UHCSTAT __REG(0x4C000060) +#define UHCHR __REG(0x4C000064) +#define UHCHIE __REG(0x4C000068) +#define UHCHIT __REG(0x4C00006C) + +#define UHCHR_FSBIR (1<<0) +#define UHCHR_FHR (1<<1) +#define UHCHR_CGR (1<<2) +#define UHCHR_SSDC (1<<3) +#define UHCHR_UIT (1<<4) +#define UHCHR_SSE (1<<5) +#define UHCHR_PSPL (1<<6) +#define UHCHR_PCPL (1<<7) +#define UHCHR_SSEP0 (1<<9) +#define UHCHR_SSEP1 (1<<10) +#define UHCHR_SSEP2 (1<<11) + +#define UHCHIE_UPRIE (1<<13) +#define UHCHIE_UPS2IE (1<<12) +#define UHCHIE_UPS1IE (1<<11) +#define UHCHIE_TAIE (1<<10) +#define UHCHIE_HBAIE (1<<8) +#define UHCHIE_RWIE (1<<7) + +#endif /* * Fast Infrared Communication Port */ - #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ @@ -722,26 +783,36 @@ typedef void (*ExcpHndlr) (void) ; #define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ #define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ - /* * Real Time Clock */ - #define RCNR __REG(0x40900000) /* RTC Count Register */ #define RTAR __REG(0x40900004) /* RTC Alarm Register */ #define RTSR __REG(0x40900008) /* RTC Status Register */ #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ - +#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ +#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ +#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ +#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ +#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ +#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ +#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ +#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ +#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ +#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ + +#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ +#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ #define RTSR_AL (1 << 0) /* RTC alarm detected */ - /* * OS Timer & Match Registers */ - #define OSMR0 __REG(0x40A00000) /* */ #define OSMR1 __REG(0x40A00004) /* */ #define OSMR2 __REG(0x40A00008) /* */ @@ -763,11 +834,9 @@ typedef void (*ExcpHndlr) (void) ; #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - /* * Pulse Width Modulator */ - #define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ @@ -776,11 +845,9 @@ typedef void (*ExcpHndlr) (void) ; #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ - /* * Interrupt Controller */ - #define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ #define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ #define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ @@ -788,11 +855,9 @@ typedef void (*ExcpHndlr) (void) ; #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ - /* * General Purpose I/O */ - #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ @@ -831,6 +896,37 @@ typedef void (*ExcpHndlr) (void) ; /* More handy macros. The argument is a literal GPIO number. */ #define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#ifdef CONFIG_PXA27X + +/* Interrupt Controller */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) +#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) +#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) +#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) +#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) +#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) +#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) +#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) +#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) +#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) +#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) +#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) +#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) +#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ + ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) +#else + #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) #define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) @@ -840,6 +936,8 @@ typedef void (*ExcpHndlr) (void) ; #define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) #define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) +#endif + /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ @@ -968,10 +1066,10 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) #define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) #define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) #define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) #define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) #define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) @@ -1038,11 +1136,12 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) +#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) +#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) /* * Power Manager */ - #define PMCR __REG(0x40F00000) /* Power Manager Control Register */ #define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ #define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ @@ -1054,8 +1153,62 @@ typedef void (*ExcpHndlr) (void) ; #define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ #define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ +#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ +#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ +#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ +#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ +#define PCMD(x) __REG(0x40F00080 + x*4) +#define PCMD0 __REG(0x40F00080 + 0 * 4) +#define PCMD1 __REG(0x40F00080 + 1 * 4) +#define PCMD2 __REG(0x40F00080 + 2 * 4) +#define PCMD3 __REG(0x40F00080 + 3 * 4) +#define PCMD4 __REG(0x40F00080 + 4 * 4) +#define PCMD5 __REG(0x40F00080 + 5 * 4) +#define PCMD6 __REG(0x40F00080 + 6 * 4) +#define PCMD7 __REG(0x40F00080 + 7 * 4) +#define PCMD8 __REG(0x40F00080 + 8 * 4) +#define PCMD9 __REG(0x40F00080 + 9 * 4) +#define PCMD10 __REG(0x40F00080 + 10 * 4) +#define PCMD11 __REG(0x40F00080 + 11 * 4) +#define PCMD12 __REG(0x40F00080 + 12 * 4) +#define PCMD13 __REG(0x40F00080 + 13 * 4) +#define PCMD14 __REG(0x40F00080 + 14 * 4) +#define PCMD15 __REG(0x40F00080 + 15 * 4) +#define PCMD16 __REG(0x40F00080 + 16 * 4) +#define PCMD17 __REG(0x40F00080 + 17 * 4) +#define PCMD18 __REG(0x40F00080 + 18 * 4) +#define PCMD19 __REG(0x40F00080 + 19 * 4) +#define PCMD20 __REG(0x40F00080 + 20 * 4) +#define PCMD21 __REG(0x40F00080 + 21 * 4) +#define PCMD22 __REG(0x40F00080 + 22 * 4) +#define PCMD23 __REG(0x40F00080 + 23 * 4) +#define PCMD24 __REG(0x40F00080 + 24 * 4) +#define PCMD25 __REG(0x40F00080 + 25 * 4) +#define PCMD26 __REG(0x40F00080 + 26 * 4) +#define PCMD27 __REG(0x40F00080 + 27 * 4) +#define PCMD28 __REG(0x40F00080 + 28 * 4) +#define PCMD29 __REG(0x40F00080 + 29 * 4) +#define PCMD30 __REG(0x40F00080 + 30 * 4) +#define PCMD31 __REG(0x40F00080 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) +/* FIXME: PCMD_SQC need be checked. */ +#define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */ + /* bit 9 should be 0 all day. */ +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +/* define MACRO for Power Manager General Configuration Register (PCFR) */ +#define PCFR_FVC (0x1 << 10) +#define PCFR_PI2C_EN (0x1 << 6) + +#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ #define PSSR_RDH (1 << 5) /* Read Disable Hold */ #define PSSR_PH (1 << 4) /* Peripheral Control Hold */ #define PSSR_VFS (1 << 2) /* VDD Fault Status */ @@ -1072,22 +1225,18 @@ typedef void (*ExcpHndlr) (void) ; #define RCSR_WDR (1 << 1) /* Watchdog Reset */ #define RCSR_HWR (1 << 0) /* Hardware Reset */ - /* * SSP Serial Port Registers */ - #define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */ #define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */ #define SSSR __REG(0x41000008) /* SSP Status Register */ #define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */ #define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ - /* * MultiMediaCard (MMC) controller */ - #define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */ #define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ #define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */ @@ -1107,24 +1256,37 @@ typedef void (*ExcpHndlr) (void) ; #define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */ #define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */ - /* * Core Clock */ - #define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ #define CKEN __REG(0x41300004) /* Clock Enable Register */ #define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#if !defined(CONFIG_PXA27X) #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#endif #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ +#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */ #define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ +#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */ #define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ #define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ #define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ #define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ +#if defined(CONFIG_PXA27X) +#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ +#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ +#endif #define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ #define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ #define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ @@ -1137,34 +1299,36 @@ typedef void (*ExcpHndlr) (void) ; #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ -#define CCCR_L09 (0x1F) -#define CCCR_L27 (0x1) -#define CCCR_L32 (0x2) -#define CCCR_L36 (0x3) -#define CCCR_L40 (0x4) -#define CCCR_L45 (0x5) - -#define CCCR_M1 (0x1 << 5) -#define CCCR_M2 (0x2 << 5) -#define CCCR_M4 (0x3 << 5) - -#define CCCR_N10 (0x2 << 7) -#define CCCR_N15 (0x3 << 7) -#define CCCR_N20 (0x4 << 7) -#define CCCR_N25 (0x5 << 7) -#define CCCR_N30 (0x6 << 7) +#if !defined(CONFIG_PXA27X) +#define CCCR_L09 (0x1F) +#define CCCR_L27 (0x1) +#define CCCR_L32 (0x2) +#define CCCR_L36 (0x3) +#define CCCR_L40 (0x4) +#define CCCR_L45 (0x5) + +#define CCCR_M1 (0x1 << 5) +#define CCCR_M2 (0x2 << 5) +#define CCCR_M4 (0x3 << 5) + +#define CCCR_N10 (0x2 << 7) +#define CCCR_N15 (0x3 << 7) +#define CCCR_N20 (0x4 << 7) +#define CCCR_N25 (0x5 << 7) +#define CCCR_N30 (0x6 << 7) +#endif /* * LCD */ - #define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ #define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ #define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ #define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ #define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ #define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ +#define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ +#define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ #define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ #define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ #define TMEDCR __REG(0x44000044) /* TMED Control Register */ @@ -1192,51 +1356,56 @@ typedef void (*ExcpHndlr) (void) ; #define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ #define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ #define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ +#if defined(CONFIG_PXA27X) +#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ +#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ +#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ +#endif -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ +#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ +#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ (((Pixel) - 1) << FShft (LCCR1_PPL)) -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ - /* pulse Width [1..64 Tpix] */ \ +#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ +#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ + /* pulse Width [1..64 Tpix] */ \ (((Tpix) - 1) << FShft (LCCR1_HSW)) -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ - /* count - 1 [Tpix] */ -#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ - /* [1..256 Tpix] */ \ +#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ + /* count - 1 [Tpix] */ +#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ + /* [1..256 Tpix] */ \ (((Tpix) - 1) << FShft (LCCR1_ELW)) -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ - /* Wait count - 1 [Tpix] */ -#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ - /* [1..256 Tpix] */ \ +#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ + /* Wait count - 1 [Tpix] */ +#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ + /* [1..256 Tpix] */ \ (((Tpix) - 1) << FShft (LCCR1_BLW)) -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ +#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ +#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ (((Line) - 1) << FShft (LCCR2_LPP)) -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ - /* Width - 1 [Tln] (L_FCLK) */ -#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ - /* Width [1..64 Tln] */ \ +#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ + /* Width - 1 [Tln] (L_FCLK) */ +#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ + /* Width [1..64 Tln] */ \ (((Tln) - 1) << FShft (LCCR2_VSW)) -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ - /* count [Tln] */ -#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ - /* [0..255 Tln] */ \ +#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ + /* count [Tln] */ +#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ + /* [0..255 Tln] */ \ ((Tln) << FShft (LCCR2_EFW)) -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ - /* Wait count [Tln] */ -#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ - /* [0..255 Tln] */ \ +#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ + /* Wait count [Tln] */ +#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ + /* [0..255 Tln] */ \ ((Tln) << FShft (LCCR2_BFW)) #if 0 @@ -1257,79 +1426,100 @@ typedef void (*ExcpHndlr) (void) ; #endif #define LCCR3_DPC (1 << 27) /* double pixel clock mode */ +#define LCCR3_PDFOR_0 (0 << 30) +#define LCCR3_PDFOR_1 (1 << 30) +#define LCCR3_PDFOR_2 (2 << 30) +#define LCCR3_PDFOR_3 (3 << 30) + -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ +#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ +#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ (((Div) << FShft (LCCR3_PCD))) -#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ -#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ - (((Bpp) << FShft (LCCR3_BPP))) +#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ +#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ + ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26))) -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) /* BAC Bias */ \ +#define LCCR3_ACB Fld (8, 8) /* AC Bias */ +#define LCCR3_Acb(Acb) /* BAC Bias */ \ (((Acb) << FShft (LCCR3_ACB))) -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ - /* pulse active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ - -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ - /* active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ - /* active Low */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ +#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ + /* pulse active High */ +#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ + +#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ + /* active High */ +#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ + /* active Low */ + +#define LCSR0_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR0_SOF (1 << 1) /* Start of frame */ +#define LCSR0_BER (1 << 2) /* Bus error */ +#define LCSR0_ABC (1 << 3) /* AC Bias count */ +#define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR0_OU (1 << 6) /* output FIFO underrun */ +#define LCSR0_QD (1 << 7) /* quick disable */ +#define LCSR0_EOF0 (1 << 8) /* end of frame */ +#define LCSR0_BS (1 << 9) /* branch status */ +#define LCSR0_SINT (1 << 10) /* subsequent interrupt */ + +#define LCSR1_SOF1 (1 << 0) +#define LCSR1_SOF2 (1 << 1) +#define LCSR1_SOF3 (1 << 2) +#define LCSR1_SOF4 (1 << 3) +#define LCSR1_SOF5 (1 << 4) +#define LCSR1_SOF6 (1 << 5) + +#define LCSR1_EOF1 (1 << 8) +#define LCSR1_EOF2 (1 << 9) +#define LCSR1_EOF3 (1 << 10) +#define LCSR1_EOF4 (1 << 11) +#define LCSR1_EOF5 (1 << 12) +#define LCSR1_EOF6 (1 << 13) + +#define LCSR1_BS1 (1 << 16) +#define LCSR1_BS2 (1 << 17) +#define LCSR1_BS3 (1 << 18) +#define LCSR1_BS4 (1 << 19) +#define LCSR1_BS5 (1 << 20) +#define LCSR1_BS6 (1 << 21) + +#define LCSR1_IU2 (1 << 25) +#define LCSR1_IU3 (1 << 26) +#define LCSR1_IU4 (1 << 27) +#define LCSR1_IU5 (1 << 28) +#define LCSR1_IU6 (1 << 29) #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ +#if defined(CONFIG_PXA27X) +#define LDCMD_SOFINT (1 << 22) +#define LDCMD_EOFINT (1 << 21) +#endif /* * Memory controller */ - #define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ -#define MDCNFG_OFFSET 0x0 -#define MDREFR_OFFSET 0x4 -#define MSC0_OFFSET 0x8 -#define MSC1_OFFSET 0xC -#define MSC2_OFFSET 0x10 -#define MECR_OFFSET 0x14 -#define SXLCR_OFFSET 0x18 -#define SXCNFG_OFFSET 0x1C -#define FLYCNFG_OFFSET 0x20 -#define SXMRS_OFFSET 0x24 -#define MCMEM0_OFFSET 0x28 -#define MCMEM1_OFFSET 0x2C -#define MCATT0_OFFSET 0x30 -#define MCATT1_OFFSET 0x34 -#define MCIO0_OFFSET 0x38 -#define MCIO1_OFFSET 0x3C -#define MDMRS_OFFSET 0x40 +#define MDCNFG_OFFSET 0x0 +#define MDREFR_OFFSET 0x4 +#define MSC0_OFFSET 0x8 +#define MSC1_OFFSET 0xC +#define MSC2_OFFSET 0x10 +#define MECR_OFFSET 0x14 +#define SXLCR_OFFSET 0x18 +#define SXCNFG_OFFSET 0x1C +#define FLYCNFG_OFFSET 0x20 +#define SXMRS_OFFSET 0x24 +#define MCMEM0_OFFSET 0x28 +#define MCMEM1_OFFSET 0x2C +#define MCATT0_OFFSET 0x30 +#define MCATT1_OFFSET 0x34 +#define MCIO0_OFFSET 0x38 +#define MCIO1_OFFSET 0x3C +#define MDMRS_OFFSET 0x40 #define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ #define MDCNFG_DE0 0x00000001 @@ -1369,5 +1559,191 @@ typedef void (*ExcpHndlr) (void) ; #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - -#endif +#if defined(CONFIG_PXA27X) + +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ + +/* Interrupt Controller */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +/* General Purpose I/O */ + +#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ +#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ +#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ +#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ +#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ +#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */ +#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ +#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ +#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ + +/* Core Clock */ + +#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ + +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controler */ +#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ +#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ +#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ +#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ + +/* Memory controller */ + +#define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */ + +/* LCD registers */ +#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ +#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ +#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ +#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ +#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ +#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ +#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ +#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ +#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ +#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ +#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ +#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ +#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ +#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ +#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ +#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ +#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ +#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ +#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ +#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ +#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ +#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ + +#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ +#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ +#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ +#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ +#define CCR __REG(0x44000090) /* Cursor Control Register */ + +#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ +#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ + +#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ +#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ + +#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ +#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ + +#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ +#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ + +#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ +#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ +#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ +#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ +#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ +#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ + +#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ +#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ +#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ + +#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ +#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ +#define CCR_CEN (1<<31) /* Enable bit for Cursor */ + +/* Keypad controller */ + +#define KPC __REG(0x41500000) /* Keypad Interface Control register */ +#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ +#define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */ +#define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */ +#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ +#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ +#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ +#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ +#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ +#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ + +#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ +#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ +#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ +#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ +#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ +#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ +#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ +#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ +#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ +#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ +#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ +#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ +#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ +#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ +#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */ +#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ +#define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */ +#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ +#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ + +#define KPDK_DKP (0x1 << 31) +#define KPDK_DK7 (0x1 << 7) +#define KPDK_DK6 (0x1 << 6) +#define KPDK_DK5 (0x1 << 5) +#define KPDK_DK4 (0x1 << 4) +#define KPDK_DK3 (0x1 << 3) +#define KPDK_DK2 (0x1 << 2) +#define KPDK_DK1 (0x1 << 1) +#define KPDK_DK0 (0x1 << 0) + +#define KPREC_OF1 (0x1 << 31) +#define kPREC_UF1 (0x1 << 30) +#define KPREC_OF0 (0x1 << 15) +#define KPREC_UF0 (0x1 << 14) + +#define KPMK_MKP (0x1 << 31) +#define KPAS_SO (0x1 << 31) +#define KPASMKPx_SO (0x1 << 31) + +#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ +#define PSLR __REG(0x40F00034) +#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ +#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ + +#endif /* CONFIG_PXA27X */ + +#endif /* _PXA_REGS_H_ */ |