diff options
Diffstat (limited to 'examples/standalone/82559_eeprom.c')
| -rw-r--r-- | examples/standalone/82559_eeprom.c | 357 |
1 files changed, 357 insertions, 0 deletions
diff --git a/examples/standalone/82559_eeprom.c b/examples/standalone/82559_eeprom.c new file mode 100644 index 0000000..5e2eee9 --- /dev/null +++ b/examples/standalone/82559_eeprom.c @@ -0,0 +1,357 @@ + +/* + * Copyright 1998-2001 by Donald Becker. + * This software may be used and distributed according to the terms of + * the GNU General Public License (GPL), incorporated herein by reference. + * Contact the author for use under other terms. + * + * This program must be compiled with "-O"! + * See the bottom of this file for the suggested compile-command. + * + * The author may be reached as becker@scyld.com, or C/O + * Scyld Computing Corporation + * 410 Severn Ave., Suite 210 + * Annapolis MD 21403 + * + * Common-sense licensing statement: Using any portion of this program in + * your own program means that you must give credit to the original author + * and release the resulting code under the GPL. + */ + +#define _PPC_STRING_H_ /* avoid unnecessary str/mem functions */ + +#include <common.h> +#include <exports.h> +#include <asm/io.h> + + +/* Default EEPROM for i82559 */ +static unsigned short default_eeprom[64] = { + 0x0100, 0x0302, 0x0504, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0x40c0, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff +}; + +static unsigned short eeprom[256]; + +static int eeprom_size = 64; +static int eeprom_addr_size = 6; + +static int debug = 0; + +static inline unsigned short swap16(unsigned short x) +{ + return (((x & 0xff) << 8) | ((x & 0xff00) >> 8)); +} + + +void * memcpy(void * dest,const void *src,size_t count) +{ + char *tmp = (char *) dest, *s = (char *) src; + + while (count--) + *tmp++ = *s++; + + return dest; +} + + +/* The EEPROM commands include the alway-set leading bit. */ +#define EE_WRITE_CMD (5) +#define EE_READ_CMD (6) +#define EE_ERASE_CMD (7) + +/* Serial EEPROM section. */ +#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */ +#define EE_CS 0x02 /* EEPROM chip select. */ +#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */ +#define EE_DATA_READ 0x08 /* EEPROM chip data out. */ +#define EE_ENB (0x4800 | EE_CS) +#define EE_WRITE_0 0x4802 +#define EE_WRITE_1 0x4806 +#define EE_OFFSET 14 + +/* Delay between EEPROM clock transitions. */ +#define eeprom_delay(ee_addr) inw(ee_addr) + +/* Wait for the EEPROM to finish the previous operation. */ +static int eeprom_busy_poll(long ee_ioaddr) +{ + int i; + outw(EE_ENB, ee_ioaddr); + for (i = 0; i < 10000; i++) /* Typical 2000 ticks */ + if (inw(ee_ioaddr) & EE_DATA_READ) + break; + return i; +} + +/* This executes a generic EEPROM command, typically a write or write enable. + It returns the data output from the EEPROM, and thus may also be used for + reads. */ +static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len) +{ + unsigned retval = 0; + long ee_addr = ioaddr + EE_OFFSET; + + if (debug > 1) + printf(" EEPROM op 0x%x: ", cmd); + + outw(EE_ENB | EE_SHIFT_CLK, ee_addr); + + /* Shift the command bits out. */ + do { + short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0; + outw(dataval, ee_addr); + eeprom_delay(ee_addr); + if (debug > 2) + printf("%X", inw(ee_addr) & 15); + outw(dataval | EE_SHIFT_CLK, ee_addr); + eeprom_delay(ee_addr); + retval = (retval << 1) | ((inw(ee_addr) & EE_DATA_READ) ? 1 : 0); + } while (--cmd_len >= 0); +#if 0 + outw(EE_ENB, ee_addr); +#endif + /* Terminate the EEPROM access. */ + outw(EE_ENB & ~EE_CS, ee_addr); + if (debug > 1) + printf(" EEPROM result is 0x%5.5x.\n", retval); + return retval; +} + +static int read_eeprom(long ioaddr, int location, int addr_len) +{ + return do_eeprom_cmd(ioaddr, ((EE_READ_CMD << addr_len) | location) + << 16 , 3 + addr_len + 16) & 0xffff; +} + +static void write_eeprom(long ioaddr, int index, int value, int addr_len) +{ + long ee_ioaddr = ioaddr + EE_OFFSET; + int i; + + /* Poll for previous op finished. */ + eeprom_busy_poll(ee_ioaddr); /* Typical 0 ticks */ + /* Enable programming modes. */ + do_eeprom_cmd(ioaddr, (0x4f << (addr_len-4)), 3 + addr_len); + /* Do the actual write. */ + do_eeprom_cmd(ioaddr, + (((EE_WRITE_CMD<<addr_len) | index)<<16) | (value & 0xffff), + 3 + addr_len + 16); + /* Poll for write finished. */ + i = eeprom_busy_poll(ee_ioaddr); /* Typical 2000 ticks */ + if (debug) + printf(" Write finished after %d ticks.\n", i); + /* Disable programming. This command is not instantaneous, so we check + for busy before the next op. */ + do_eeprom_cmd(ioaddr, (0x40 << (addr_len-4)), 3 + addr_len); + eeprom_busy_poll(ee_ioaddr); +} + +static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr) +{ + unsigned short checksum = 0; + int size_test; + int i; + + printf("Resetting i82559 EEPROM @ 0x%08lx ... ", ioaddr); + + size_test = do_eeprom_cmd(ioaddr, (EE_READ_CMD << 8) << 16, 27); + eeprom_addr_size = (size_test & 0xffe0000) == 0xffe0000 ? 8 : 6; + eeprom_size = 1 << eeprom_addr_size; + + memcpy(eeprom, default_eeprom, sizeof default_eeprom); + + for (i = 0; i < 3; i++) + eeprom[i] = (hwaddr[i*2+1]<<8) + hwaddr[i*2]; + + /* Recalculate the checksum. */ + for (i = 0; i < eeprom_size - 1; i++) + checksum += eeprom[i]; + eeprom[i] = 0xBABA - checksum; + + for (i = 0; i < eeprom_size; i++) + write_eeprom(ioaddr, i, eeprom[i], eeprom_addr_size); + + for (i = 0; i < eeprom_size; i++) + if (read_eeprom(ioaddr, i, eeprom_addr_size) != eeprom[i]) { + printf("failed\n"); + return 1; + } + + printf("done\n"); + return 0; +} + +static unsigned int hatoi(char *p, char **errp) +{ + unsigned int res = 0; + + while (1) { + switch (*p) { + case 'a': + case 'b': + case 'c': + case 'd': + case 'e': + case 'f': + res |= (*p - 'a' + 10); + break; + case 'A': + case 'B': + case 'C': + case 'D': + case 'E': + case 'F': + res |= (*p - 'A' + 10); + break; + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + case '8': + case '9': + res |= (*p - '0'); + break; + default: + if (errp) { + *errp = p; + } + return res; + } + p++; + if (*p == 0) { + break; + } + res <<= 4; + } + + if (errp) { + *errp = NULL; + } + + return res; +} + +static unsigned char *gethwaddr(char *in, unsigned char *out) +{ + char tmp[3]; + int i; + char *err; + + for (i=0;i<6;i++) { + if (in[i*3+2] == 0 && i == 5) { + out[i] = hatoi(&in[i*3], &err); + if (err) { + return NULL; + } + } else if (in[i*3+2] == ':' && i < 5) { + tmp[0] = in[i*3]; + tmp[1] = in[i*3+1]; + tmp[2] = 0; + out[i] = hatoi(tmp, &err); + if (err) { + return NULL; + } + } else { + return NULL; + } + } + + return out; +} + +static u32 +read_config_dword(int bus, int dev, int func, int reg) +{ + u32 res; + + outl(0x80000000|(bus&0xff)<<16|(dev&0x1f)<<11|(func&7)<<8|(reg&0xfc), + 0xcf8); + res = inl(0xcfc); + outl(0, 0xcf8); + return res; +} + +static u16 +read_config_word(int bus, int dev, int func, int reg) +{ + u32 res; + + outl(0x80000000|(bus&0xff)<<16|(dev&0x1f)<<11|(func&7)<<8|(reg&0xfc), + 0xcf8); + res = inw(0xcfc + (reg & 2)); + outl(0, 0xcf8); + return res; +} + +static void +write_config_word(int bus, int dev, int func, int reg, u16 data) +{ + + outl(0x80000000|(bus&0xff)<<16|(dev&0x1f)<<11|(func&7)<<8|(reg&0xfc), + 0xcf8); + outw(data, 0xcfc + (reg & 2)); + outl(0, 0xcf8); +} + + +int main (int argc, char *argv[]) +{ + unsigned char *eth_addr; + uchar buf[6]; + int instance; + + app_startup(argv); + if (argc != 2) { + printf ("call with base Ethernet address\n"); + return 1; + } + + + eth_addr = gethwaddr(argv[1], buf); + if (NULL == eth_addr) { + printf ("Can not parse ethernet address\n"); + return 1; + } + if (eth_addr[5] & 0x01) { + printf("Base Ethernet address must be even\n"); + } + + + for (instance = 0; instance < 2; instance ++) { + unsigned int io_addr; + unsigned char mac[6]; + int bar1 = read_config_dword(0, 6+instance, 0, 0x14); + if (! (bar1 & 1)) { + printf("ETH%d is disabled %x\n", instance, bar1); + } else { + printf("ETH%d IO=0x%04x\n", instance, bar1 & ~3); + } + io_addr = (bar1 & (~3L)); + + + write_config_word(0, 6+instance, 0, 4, + read_config_word(0, 6+instance, 0, 4) | 1); + printf("ETH%d CMD %04x\n", instance, + read_config_word(0, 6+instance, 0, 4)); + + memcpy(mac, eth_addr, 6); + mac[5] += instance; + + printf("got io=%04x, ha=%02x:%02x:%02x:%02x:%02x:%02x\n", + io_addr, mac[0], mac[1], mac[2], + mac[3], mac[4], mac[5]); + reset_eeprom(io_addr, mac); + } + return 0; +} |