diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/Makefile | 3 | ||||
-rw-r--r-- | drivers/plb2800_eth.c | 396 |
2 files changed, 398 insertions, 1 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index 59d753e..b3857a7 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -33,7 +33,8 @@ OBJS = 3c589.o 5701rls.o at91rm9200_ether.o \ eepro100.o i8042.o inca-ip_sw.o \ natsemi.o ns16550.o ns8382x.o ns87308.o \ pci.o pci_auto.o pci_indirect.o \ - pcnet.o s3c24x0_i2c.o sed13806.o serial.o \ + pcnet.o plb2800_eth.o \ + s3c24x0_i2c.o sed13806.o serial.o \ smc91111.o smiLynxEM.o sym53c8xx.o \ tigon3.o w83c553f.o diff --git a/drivers/plb2800_eth.c b/drivers/plb2800_eth.c new file mode 100644 index 0000000..7c7f9f8 --- /dev/null +++ b/drivers/plb2800_eth.c @@ -0,0 +1,396 @@ +/* + * PLB2800 internal switch ethernet driver. + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \ + && defined(CONFIG_PLB2800_ETHER) + +#include <malloc.h> +#include <net.h> +#include <asm/addrspace.h> + + +#define NUM_RX_DESC PKTBUFSRX +#define TOUT_LOOP 1000000 + +#define LONG_REF(addr) (*((volatile unsigned long*)addr)) + +#define CMAC_CRX_CTRL LONG_REF(0xb800c870) +#define CMAC_CTX_CTRL LONG_REF(0xb800c874) +#define SYS_MAC_ADDR_0 LONG_REF(0xb800c878) +#define SYS_MAC_ADDR_1 LONG_REF(0xb800c87c) +#define MIPS_H_MASK LONG_REF(0xB800C810) + +#define MA_LEARN LONG_REF(0xb8008004) +#define DA_LOOKUP LONG_REF(0xb8008008) + +#define CMAC_CRX_CTRL_PD 0x00000001 +#define CMAC_CRX_CTRL_CG 0x00000002 +#define CMAC_CRX_CTRL_PL_SHIFT 2 +#define CMAC_CRIT 0x0 +#define CMAC_NON_CRIT 0x1 +#define MBOX_STAT_ID_SHF 28 +#define MBOX_STAT_CP 0x80000000 +#define MBOX_STAT_MB 0x00000001 +#define EN_MA_LEARN 0x02000000 +#define EN_DA_LKUP 0x01000000 +#define MA_DEST_SHF 11 +#define DA_DEST_SHF 11 +#define DA_STATE_SHF 19 +#define TSTAMP_MS 0x00000000 +#define SW_H_MBOX4_MASK 0x08000000 +#define SW_H_MBOX3_MASK 0x04000000 +#define SW_H_MBOX2_MASK 0x02000000 +#define SW_H_MBOX1_MASK 0x01000000 + +typedef volatile struct { + unsigned int stat; + unsigned int cmd; + unsigned int cnt; + unsigned int adr; +} mailbox_t; + +#define MBOX_REG(mb) ((mailbox_t*)(0xb800c830+(mb<<4))) + +typedef volatile struct { + unsigned int word0; + unsigned int word1; + unsigned int word2; +} mbhdr_t; + +#define MBOX_MEM(mb) ((void*)(0xb800a000+((3-mb)<<11))) + + +static int plb2800_eth_init(struct eth_device *dev, bd_t * bis); +static int plb2800_eth_send(struct eth_device *dev, volatile void *packet, + int length); +static int plb2800_eth_recv(struct eth_device *dev); +static void plb2800_eth_halt(struct eth_device *dev); + +static void plb2800_set_mac_addr(struct eth_device *dev, unsigned char * addr); +static unsigned char * plb2800_get_mac_addr(void); + +static int rx_new; +static int mac_addr_set = 0; + + +int plb2800_eth_initialize(bd_t * bis) +{ + struct eth_device *dev; + ulong temp; + +#ifdef DEBUG + printf("Entered plb2800_eth_initialize()\n"); +#endif + + if (!(dev = (struct eth_device *) malloc (sizeof *dev))) + { + printf("Failed to allocate memory\n"); + return 0; + } + memset(dev, 0, sizeof(*dev)); + + sprintf(dev->name, "PLB2800 Switch"); + dev->init = plb2800_eth_init; + dev->halt = plb2800_eth_halt; + dev->send = plb2800_eth_send; + dev->recv = plb2800_eth_recv; + + eth_register(dev); + + /* bug fix */ + *(ulong *)0xb800e800 = 0x838; + + /* Set MBOX ownership */ + temp = CMAC_CRIT << MBOX_STAT_ID_SHF; + MBOX_REG(0)->stat = temp; + MBOX_REG(1)->stat = temp; + + temp = CMAC_NON_CRIT << MBOX_STAT_ID_SHF; + MBOX_REG(2)->stat = temp; + MBOX_REG(3)->stat = temp; + + plb2800_set_mac_addr(dev, plb2800_get_mac_addr()); + + /* Disable all Mbox interrupt */ + temp = MIPS_H_MASK; + temp &= ~ (SW_H_MBOX1_MASK | SW_H_MBOX2_MASK | SW_H_MBOX3_MASK | SW_H_MBOX4_MASK) ; + MIPS_H_MASK = temp; + +#ifdef DEBUG + printf("Leaving plb2800_eth_initialize()\n"); +#endif + + return 1; +} + +static int plb2800_eth_init(struct eth_device *dev, bd_t * bis) +{ +#ifdef DEBUG + printf("Entering plb2800_eth_init()\n"); +#endif + + plb2800_set_mac_addr(dev, dev->enetaddr); + + rx_new = 0; + +#ifdef DEBUG + printf("Leaving plb2800_eth_init()\n"); +#endif + + return 0; +} + + +static int plb2800_eth_send(struct eth_device *dev, volatile void *packet, + int length) +{ + int i; + int res = -1; + u32 temp; + mailbox_t * mb = MBOX_REG(0); + char * mem = MBOX_MEM(0); + +#ifdef DEBUG + printf("Entered plb2800_eth_send()\n"); +#endif + + if (length <= 0) + { + printf ("%s: bad packet size: %d\n", dev->name, length); + goto Done; + } + + if (length < 64) + { + length = 64; + } + + temp = CMAC_CRX_CTRL_CG | ((length + 4) << CMAC_CRX_CTRL_PL_SHIFT); + +#ifdef DEBUG + printf("0 mb->stat = 0x%x\n", mb->stat); +#endif + + for(i = 0; mb->stat & (MBOX_STAT_CP | MBOX_STAT_MB); i++) + { + if (i >= TOUT_LOOP) + { + printf("%s: tx buffer not ready\n", dev->name); + printf("1 mb->stat = 0x%x\n", mb->stat); + goto Done; + } + } + + /* For some strange reason, memcpy doesn't work, here! + */ + do + { + int words = (length >> 2) + 1; + unsigned int* dst = (unsigned int*)(mem); + unsigned int* src = (unsigned int*)(packet); + for (i = 0; i < words; i++) + { + *dst = *src; + dst++; + src++; + }; + } while(0); + + CMAC_CRX_CTRL = temp; + mb->cmd = MBOX_STAT_CP; + +#ifdef DEBUG + printf("2 mb->stat = 0x%x\n", mb->stat); +#endif + + res = length; +Done: + +#ifdef DEBUG + printf("Leaving plb2800_eth_send()\n"); +#endif + + return res; +} + + +static int plb2800_eth_recv(struct eth_device *dev) +{ + int length = 0; + mailbox_t * mbox = MBOX_REG(3); + unsigned char * hdr = MBOX_MEM(3); + unsigned int stat; + +#ifdef DEBUG + printf("Entered plb2800_eth_recv()\n"); +#endif + + for (;;) + { + stat = mbox->stat; + + if (!(stat & MBOX_STAT_CP)) + { + break; + } + + length = ((*(hdr + 6) & 0x3f) << 8) + *(hdr + 7); + memcpy((void *)NetRxPackets[rx_new], hdr + 12, length); + + stat &= ~MBOX_STAT_CP; + mbox->stat = stat; +#ifdef DEBUG + { + int i; + for (i=0;i<length - 4;i++) + { + if (i % 16 == 0) printf("\n%04x: ", i); + printf("%02X ", NetRxPackets[rx_new][i]); + } + printf("\n"); + } +#endif + + if (length) + { +#ifdef DEBUG + printf("Received %d bytes\n", length); +#endif + NetReceive((void*)(NetRxPackets[rx_new]), + length - 4); + } + else + { +#if 1 + printf("Zero length!!!\n"); +#endif + } + + rx_new = (rx_new + 1) % NUM_RX_DESC; + } + +#ifdef DEBUG + printf("Leaving plb2800_eth_recv()\n"); +#endif + + return length; +} + + +static void plb2800_eth_halt(struct eth_device *dev) +{ +#ifdef DEBUG + printf("Entered plb2800_eth_halt()\n"); +#endif + +#ifdef DEBUG + printf("Leaving plb2800_eth_halt()\n"); +#endif +} + +static void plb2800_set_mac_addr(struct eth_device *dev, unsigned char * addr) +{ + char packet[60]; + ulong temp; + int ix; + + if (mac_addr_set || + NULL == addr || memcmp(addr, "\0\0\0\0\0\0", 6) == 0) + { + return; + } + + /* send one packet through CPU port + * in order to learn system MAC address + */ + + /* Set DA_LOOKUP register */ + temp = EN_MA_LEARN | (0 << DA_STATE_SHF) | (63 << DA_DEST_SHF); + DA_LOOKUP = temp; + + /* Set MA_LEARN register */ + temp = 50 << MA_DEST_SHF; /* static entry */ + MA_LEARN = temp; + + /* set destination address */ + for (ix=0;ix<6;ix++) + packet[ix] = 0xff; + + /* set source address = system MAC address */ + for (ix=0;ix<6;ix++) + packet[6+ix] = addr[ix]; + + /* set type field */ + packet[12]=0xaa; + packet[13]=0x55; + + /* set data field */ + for(ix=14;ix<60;ix++) + packet[ix] = 0x00; + +#ifdef DEBUG + for (ix=0;ix<6;ix++) + printf("mac_addr[%d]=%02X\n", ix, (unsigned char)packet[6+ix]); +#endif + + /* set one packet */ + plb2800_eth_send(dev, packet, sizeof(packet)); + + /* delay for a while */ + for(ix=0;ix<65535;ix++) + temp = ~temp; + + /* Set CMAC_CTX_CTRL register */ + temp = TSTAMP_MS; /* no autocast */ + CMAC_CTX_CTRL = temp; + + /* Set DA_LOOKUP register */ + temp = EN_DA_LKUP; + DA_LOOKUP = temp; + + mac_addr_set = 1; +} + +static unsigned char * plb2800_get_mac_addr(void) +{ + static unsigned char addr[6]; + char *tmp, *end; + int i; + + tmp = getenv ("ethaddr"); + if (NULL == tmp) return NULL; + + for (i=0; i<6; i++) { + addr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; + if (tmp) + tmp = (*end) ? end+1 : end; + } + + return addr; +} + +#endif /* CONFIG_PLB2800_ETHER */ |