diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/serial_ks8695.c | 117 |
2 files changed, 118 insertions, 0 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 619d9da..95255df 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o +COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o COBJS-$(CONFIG_MX31_UART) += serial_mx31.o COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c new file mode 100644 index 0000000..aacd1be --- /dev/null +++ b/drivers/serial/serial_ks8695.c @@ -0,0 +1,117 @@ +/* + * serial.c -- KS8695 serial driver + * + * (C) Copyright 2004, Greg Ungerer <greg.ungerer@opengear.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/platform.h> + +#ifndef CONFIG_SERIAL1 +#error "Bad: you didn't configure serial ..." +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Define the UART hardware register access structure. + */ +struct ks8695uart { + unsigned int RX; /* 0x00 - Receive data (r) */ + unsigned int TX; /* 0x04 - Transmit data (w) */ + unsigned int FCR; /* 0x08 - Fifo Control (r/w) */ + unsigned int LCR; /* 0x0c - Line Control (r/w) */ + unsigned int MCR; /* 0x10 - Modem Control (r/w) */ + unsigned int LSR; /* 0x14 - Line Status (r/w) */ + unsigned int MSR; /* 0x18 - Modem Status (r/w) */ + unsigned int BD; /* 0x1c - Baud Rate (r/w) */ + unsigned int SR; /* 0x20 - Status (r/w) */ +}; + +#define KS8695_UART_ADDR ((void *) (KS8695_IO_BASE + KS8695_UART_RX_BUFFER)) +#define KS8695_UART_CLK 25000000 + + +/* + * Under some circumstances we want to be "quiet" and not issue any + * serial output - though we want u-boot to otherwise work and behave + * the same. By default be noisy. + */ +int serial_console = 1; + + +void serial_setbrg(void) +{ + volatile struct ks8695uart *uartp = KS8695_UART_ADDR; + + /* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/ + uartp->BD = KS8695_UART_CLK / gd->baudrate; + uartp->LCR = KS8695_UART_LINEC_WLEN8; +} + +int serial_init(void) +{ + serial_console = 1; + serial_setbrg(); + return 0; +} + +void serial_raw_putc(const char c) +{ + volatile struct ks8695uart *uartp = KS8695_UART_ADDR; + int i; + + for (i = 0; (i < 0x100000); i++) { + if (uartp->LSR & KS8695_UART_LINES_TXFE) + break; + } + + uartp->TX = c; +} + +void serial_putc(const char c) +{ + if (serial_console) { + serial_raw_putc(c); + if (c == '\n') + serial_raw_putc('\r'); + } +} + +int serial_tstc(void) +{ + volatile struct ks8695uart *uartp = KS8695_UART_ADDR; + if (serial_console) + return ((uartp->LSR & KS8695_UART_LINES_RXFE) ? 1 : 0); + return 0; +} + +void serial_puts(const char *s) +{ + char c; + while ((c = *s++) != 0) + serial_putc(c); +} + +int serial_getc(void) +{ + volatile struct ks8695uart *uartp = KS8695_UART_ADDR; + + while ((uartp->LSR & KS8695_UART_LINES_RXFE) == 0) + ; + return (uartp->RX); +} |