diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/mxc_i2c.c | 207 | ||||
| -rw-r--r-- | drivers/mtd/Makefile | 8 | ||||
| -rw-r--r-- | drivers/mtd/cfi_flash.c | 48 | ||||
| -rw-r--r-- | drivers/mtd/dataflash.c | 83 | ||||
| -rw-r--r-- | drivers/mtd/jedec_flash.c | 19 | ||||
| -rw-r--r-- | drivers/net/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/e1000.c | 54 | ||||
| -rw-r--r-- | drivers/net/e1000.h | 53 | ||||
| -rw-r--r-- | drivers/net/greth.c | 661 | ||||
| -rw-r--r-- | drivers/net/greth.h | 97 | ||||
| -rw-r--r-- | drivers/net/macb.c | 4 | ||||
| -rw-r--r-- | drivers/net/mcffec.c | 7 | ||||
| -rw-r--r-- | drivers/net/smc91111.h | 73 | ||||
| -rw-r--r-- | drivers/net/smc911x.c | 680 | ||||
| -rw-r--r-- | drivers/net/tsec.c | 30 | ||||
| -rw-r--r-- | drivers/net/tsec.h | 5 | ||||
| -rw-r--r-- | drivers/pci/Makefile | 3 | ||||
| -rw-r--r-- | drivers/pci/pci_sh4.c | 76 | ||||
| -rw-r--r-- | drivers/pci/pci_sh7751.c | 199 | ||||
| -rw-r--r-- | drivers/pci/pci_sh7780.c | 107 | ||||
| -rw-r--r-- | drivers/serial/serial_sh.c | 70 |
22 files changed, 2364 insertions, 123 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 29d6c03..071ef00 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -29,6 +29,7 @@ COBJS-y += fsl_i2c.o COBJS-y += omap1510_i2c.o COBJS-y += omap24xx_i2c.o COBJS-y += tsi108_i2c.o +COBJS-y += mxc_i2c.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c new file mode 100644 index 0000000..3c2a9cf --- /dev/null +++ b/drivers/i2c/mxc_i2c.c @@ -0,0 +1,207 @@ +/* + * i2c driver for Freescale mx31 + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if defined(CONFIG_HARD_I2C) && defined(CONFIG_I2C_MXC) + +#include <asm/arch/mx31.h> +#include <asm/arch/mx31-regs.h> + +#define IADR 0x00 +#define IFDR 0x04 +#define I2CR 0x08 +#define I2SR 0x0c +#define I2DR 0x10 + +#define I2CR_IEN (1 << 7) +#define I2CR_IIEN (1 << 6) +#define I2CR_MSTA (1 << 5) +#define I2CR_MTX (1 << 4) +#define I2CR_TX_NO_AK (1 << 3) +#define I2CR_RSTA (1 << 2) + +#define I2SR_ICF (1 << 7) +#define I2SR_IBB (1 << 5) +#define I2SR_IIF (1 << 1) +#define I2SR_RX_NO_AK (1 << 0) + +#ifdef CFG_I2C_MX31_PORT1 +#define I2C_BASE 0x43f80000 +#elif defined(CFG_I2C_MX31_PORT2) +#define I2C_BASE 0x43f98000 +#elif defined(CFG_I2C_MX31_PORT3) +#define I2C_BASE 0x43f84000 +#else +#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver" +#endif + +#ifdef DEBUG +#define DPRINTF(args...) printf(args) +#else +#define DPRINTF(args...) +#endif + +static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144, + 160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960, + 1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840}; + +void i2c_init(int speed, int unused) +{ + int freq = mx31_get_ipg_clk(); + int i; + + for (i = 0; i < 0x1f; i++) + if (freq / div[i] <= speed) + break; + + DPRINTF("%s: speed: %d\n", __FUNCTION__, speed); + + __REG16(I2C_BASE + I2CR) = 0; /* Reset module */ + __REG16(I2C_BASE + IFDR) = i; + __REG16(I2C_BASE + I2CR) = I2CR_IEN; + __REG16(I2C_BASE + I2SR) = 0; +} + +static int wait_busy(void) +{ + int timeout = 10000; + + while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout) + udelay(1); + __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */ + + return timeout; +} + +static int tx_byte(u8 byte) +{ + __REG16(I2C_BASE + I2DR) = byte; + + if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK) + return -1; + return 0; +} + +static int rx_byte(void) +{ + if (!wait_busy()) + return -1; + + return __REG16(I2C_BASE + I2DR); +} + +int i2c_probe(uchar chip) +{ + int ret; + + __REG16(I2C_BASE + I2CR) = 0; /* Reset module */ + __REG16(I2C_BASE + I2CR) = I2CR_IEN; + + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX; + ret = tx_byte(chip << 1); + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX; + + return ret; +} + +static int i2c_addr(uchar chip, uint addr, int alen) +{ + __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */ + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX; + + if (tx_byte(chip << 1)) + return -1; + + while (alen--) + if (tx_byte((addr >> (alen * 8)) & 0xff)) + return -1; + return 0; +} + +int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) +{ + int timeout = 10000; + int ret; + + DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: +%d\n", \ + __FUNCTION__, chip, addr, alen, len); + + if (i2c_addr(chip, addr, alen)) { + printf("i2c_addr failed\n"); + return -1; + } + + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | \ + I2CR_MTX | I2CR_RSTA; + + if (tx_byte(chip << 1 | 1)) + return -1; + + __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | ((len == 1) \ + ? I2CR_TX_NO_AK : 0); + + ret = __REG16(I2C_BASE + I2DR); + + while (len--) { + if ((ret = rx_byte()) < 0) + return -1; + *buf++ = ret; + if (len <= 1) + __REG16(I2C_BASE + I2CR) = I2CR_IEN | \ + I2CR_MSTA | I2CR_TX_NO_AK; + } + + wait_busy(); + + __REG16(I2C_BASE + I2CR) = I2CR_IEN; + + while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout) + udelay(1); + + return 0; +} + +int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) +{ + int timeout = 10000; + DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n", \ + __FUNCTION__, chip, addr, alen, len); + + if (i2c_addr(chip, addr, alen)) + return -1; + + while (len--) + if (tx_byte(*buf++)) + return -1; + + __REG16(I2C_BASE + I2CR) = I2CR_IEN; + + while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout) + udelay(1); + + return 0; +} + +#endif /* CONFIG_HARD_I2C */ diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 952e919..ff932a1 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -23,17 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libmtd.a +LIB := $(obj)libmtd.a COBJS-y += at45.o COBJS-y += cfi_flash.o -COBJS-y += dataflash.o +COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o COBJS-y += mw_eeprom.o COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o COBJS := $(COBJS-y) -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f04c72d..40fddcd 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -239,12 +239,14 @@ static u32 flash_read32(void *addr) return __raw_readl(addr); } -static u64 flash_read64(void *addr) +static u64 __flash_read64(void *addr) { /* No architectures currently implement __raw_readq() */ return *(volatile u64 *)addr; } +u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64"))); + /*----------------------------------------------------------------------- */ #if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE) @@ -365,6 +367,20 @@ static inline uchar flash_read_uchar (flash_info_t * info, uint offset) } /*----------------------------------------------------------------------- + * read a word at a port width address, assume 16bit bus + */ +static inline ushort flash_read_word (flash_info_t * info, uint offset) +{ + ushort *addr, retval; + + addr = flash_map (info, 0, offset); + retval = flash_read16 (addr); + flash_unmap (info, 0, offset, addr); + return retval; +} + + +/*----------------------------------------------------------------------- * read a long word by picking the least significant byte of each maximum * port size word. Swap for ppc format. */ @@ -1449,17 +1465,29 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) flash_unlock_seq(info, 0); flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID); udelay(1000); /* some flash are slow to respond */ + info->manufacturer_id = flash_read_uchar (info, FLASH_OFFSET_MANUFACTURER_ID); - info->device_id = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID); - if (info->device_id == 0x7E) { - /* AMD 3-byte (expanded) device ids */ - info->device_id2 = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID2); - info->device_id2 <<= 8; - info->device_id2 |= flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID3); + + switch (info->chipwidth){ + case FLASH_CFI_8BIT: + info->device_id = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID); + if (info->device_id == 0x7E) { + /* AMD 3-byte (expanded) device ids */ + info->device_id2 = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID2); + info->device_id2 <<= 8; + info->device_id2 |= flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID3); + } + break; + case FLASH_CFI_16BIT: + info->device_id = flash_read_word (info, + FLASH_OFFSET_DEVICE_ID); + break; + default: + break; } flash_write_cmd(info, 0, 0, AMD_CMD_RESET); } diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c index 36c99a0..d8f78f2 100644 --- a/drivers/mtd/dataflash.c +++ b/drivers/mtd/dataflash.c @@ -19,7 +19,6 @@ */ #include <common.h> #include <config.h> -#ifdef CONFIG_HAS_DATAFLASH #include <asm/hardware.h> #include <dataflash.h> @@ -31,7 +30,7 @@ struct dataflash_addr { int cs; }; -#ifdef CONFIG_AT91SAM9260EK +#if defined(CONFIG_AT91SAM9260EK) struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1} @@ -48,51 +47,13 @@ struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { #endif /*define the area offsets*/ -#if defined(CONFIG_AT91SAM9261EK) || defined(CONFIG_AT91SAM9260EK) || \ - defined(CONFIG_AT91SAM9263EK) || defined(CONFIG_AT91CAP9ADK) -#if defined(CONFIG_NEW_PARTITION) dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x00003FFF, FLAG_PROTECT_SET, 0, "Bootstrap"}, /* ROM code */ - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, /* u-boot environment */ - {0x00008400, 0x0003DDFF, FLAG_PROTECT_SET, 0, "U-Boot"}, /* u-boot code */ - {0x0003DE00, 0x00041FFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "MON"}, /* Room for alternative boot monitor */ - {0x00042000, 0x0018BFFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "OS"}, /* data area size to tune */ - {0x0018C000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "FS"}, /* data area size to tune */ + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x0003DDFF, FLAG_PROTECT_SET, 0, "U-Boot"}, + {0x0003DE00, 0x0023DE3F, FLAG_PROTECT_CLEAR, 0, "Kernel"}, + {0x0023DE40, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, }; -#else -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0, 0x3fff, FLAG_PROTECT_SET}, /* ROM code */ - {0x4000, 0x7fff, FLAG_PROTECT_CLEAR}, /* u-boot environment */ - {0x8000, 0x37fff, FLAG_PROTECT_SET}, /* u-boot code */ - {0x38000, 0x1fffff, FLAG_PROTECT_CLEAR}, /* data area size to tune */ -}; -#endif -#elif defined(CONFIG_NEW_PARTITION) -/*define the area offsets*/ -/* Invalid partitions should be defined with start > end */ -dataflash_protect_t area_list[NB_DATAFLASH_AREA*CFG_MAX_DATAFLASH_BANKS] = { - {0x00000000, 0x000083ff, FLAG_PROTECT_SET, 0, "Bootstrap"}, /* ROM code */ - {0x00008400, 0x00020fff, FLAG_PROTECT_SET, 0, "U-Boot"}, /* u-boot code */ - {0x00021000, 0x000293ff, FLAG_PROTECT_CLEAR, 0, "Environment"}, /* u-boot environment 8Kb */ - {0x00029400, 0x00041fff, FLAG_PROTECT_INVALID, 0, "<Unused>"}, /* Rest of Sector 1 */ - {0x00042000, 0x0018Bfff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "OS"}, /* data area size to tune */ - {0x0018C000, 0xffffffff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "FS"}, /* data area size to tune */ - - {0x00000000, 0xffffffff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "Data"}, /* data area */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ -}; -#else -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0, 0x7fff, FLAG_PROTECT_SET}, /* ROM code */ - {0x8000, 0x1ffff, FLAG_PROTECT_SET}, /* u-boot code */ - {0x20000, 0x27fff, FLAG_PROTECT_CLEAR}, /* u-boot environment */ - {0x28000, 0x1fffff, FLAG_PROTECT_CLEAR}, /* data area size to tune */ -}; -#endif extern void AT91F_SpiInit (void); extern int AT91F_DataflashProbe (int i, AT91PS_DataflashDesc pDesc); @@ -108,7 +69,7 @@ int AT91F_DataflashInit (void) { int i, j; int dfcode; - int part = 0; + int part; int last_part; int found[CFG_MAX_DATAFLASH_BANKS]; unsigned char protected; @@ -181,7 +142,8 @@ int AT91F_DataflashInit (void) (dataflash_info[i].Device.pages_number * dataflash_info[i].Device.pages_size)-1; - last_part=0; + part = 0; + last_part = 0; /* set the area addresses */ for(j = 0; j<NB_DATAFLASH_AREA; j++) { if(found[i]!=0) { @@ -224,6 +186,7 @@ int AT91F_DataflashSetEnv (void) unsigned char env; unsigned char s[32]; /* Will fit a long int in hex */ unsigned long start; + for (i = 0, part= 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { for(j = 0; j<NB_DATAFLASH_AREA; j++) { env = area_list[part].setenv; @@ -297,9 +260,8 @@ void dataflash_print_info (void) } } - /*---------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataflashSelect */ +/* Function Name : AT91F_DataflashSelect */ /* Object : Select the correct device */ /*---------------------------------------------------------------------------*/ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, @@ -326,7 +288,7 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, } /*---------------------------------------------------------------------------*/ -/* Function Name : addr_dataflash */ +/* Function Name : addr_dataflash */ /* Object : Test if address is valid */ /*---------------------------------------------------------------------------*/ int addr_dataflash (unsigned long addr) @@ -344,8 +306,9 @@ int addr_dataflash (unsigned long addr) return addr_valid; } + /*---------------------------------------------------------------------------*/ -/* Function Name : size_dataflash */ +/* Function Name : size_dataflash */ /* Object : Test if address is valid regarding the size */ /*---------------------------------------------------------------------------*/ int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, @@ -361,13 +324,15 @@ int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, return 1; } + /*---------------------------------------------------------------------------*/ -/* Function Name : prot_dataflash */ +/* Function Name : prot_dataflash */ /* Object : Test if destination area is protected */ /*---------------------------------------------------------------------------*/ int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr) { -int area; + int area; + /* find area */ for (area=0; area < NB_DATAFLASH_AREA; area++) { if ((addr >= pdataFlash->pDevice->area_list[area].start) && @@ -385,6 +350,7 @@ int area; return 1; } + /*--------------------------------------------------------------------------*/ /* Function Name : dataflash_real_protect */ /* Object : protect/unprotect area */ @@ -392,7 +358,8 @@ int area; int dataflash_real_protect (int flag, unsigned long start_addr, unsigned long end_addr) { -int i,j, area1, area2, addr_valid = 0; + int i,j, area1, area2, addr_valid = 0; + /* find dataflash */ for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { if ((((int) start_addr) & 0xF0000000) == @@ -435,7 +402,7 @@ int i,j, area1, area2, addr_valid = 0; } /*---------------------------------------------------------------------------*/ -/* Function Name : read_dataflash */ +/* Function Name : read_dataflash */ /* Object : dataflash memory read */ /*---------------------------------------------------------------------------*/ int read_dataflash (unsigned long addr, unsigned long size, char *result) @@ -454,9 +421,8 @@ int read_dataflash (unsigned long addr, unsigned long size, char *result) return (AT91F_DataFlashRead (pFlash, AddrToRead, size, result)); } - /*---------------------------------------------------------------------------*/ -/* Function Name : write_dataflash */ +/* Function Name : write_dataflash */ /* Object : write a block in dataflash */ /*---------------------------------------------------------------------------*/ int write_dataflash (unsigned long addr_dest, unsigned long addr_src, @@ -483,7 +449,6 @@ int write_dataflash (unsigned long addr_dest, unsigned long addr_src, AddrToWrite, size); } - void dataflash_perror (int err) { switch (err) { @@ -509,5 +474,3 @@ void dataflash_perror (int err) break; } } - -#endif diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c index 41aad3b..b958d17 100644 --- a/drivers/mtd/jedec_flash.c +++ b/drivers/mtd/jedec_flash.c @@ -216,6 +216,25 @@ static const struct amd_flash_info jedec_table[] = { } }, #endif +#ifdef CFG_FLASH_LEGACY_512Kx16 + { + .mfr_id = MANUFACTURER_AMD, + .dev_id = AM29LV400BB, + .name = "AMD AM29LV400BB", + .uaddr = { + [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ + }, + .DevSize = SIZE_512KiB, + .CmdSet = CFI_CMDSET_AMD_LEGACY, + .NumEraseRegions= 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7), + } + }, +#endif }; static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 320dc3e..6f0225b 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -35,6 +35,7 @@ COBJS-y += e1000.o COBJS-y += eepro100.o COBJS-y += enc28j60.o COBJS-y += fsl_mcdmafec.o +COBJS-$(CONFIG_GRETH) += greth.o COBJS-y += inca-ip_sw.o COBJS-y += ks8695eth.o COBJS-y += lan91c96.o @@ -54,6 +55,7 @@ COBJS-y += rtl8139.o COBJS-y += rtl8169.o COBJS-y += s3c4510b_eth.o COBJS-y += smc91111.o +COBJS-y += smc911x.o COBJS-y += tigon3.o COBJS-y += tsec.o COBJS-y += tsi108_eth.o diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index f0741da..4a72252 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -1,5 +1,5 @@ /************************************************************************** -Inter Pro 1000 for ppcboot/das-u-boot +Intel Pro 1000 for ppcboot/das-u-boot Drivers are port from Intel's Linux driver e1000-4.3.15 and from Etherboot pro 1000 driver by mrakes at vivato dot net tested on both gig copper and gig fiber boards @@ -82,6 +82,7 @@ static struct pci_device_id supported[] = { {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545EM_FIBER}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_FIBER}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82540EM_LOM}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82541ER}, }; /* Function forward declarations */ @@ -512,6 +513,11 @@ e1000_read_mac_addr(struct eth_device *nic) /* Invert the last bit if this is the second device */ nic->enetaddr[5] += 1; } +#ifdef CONFIG_E1000_FALLBACK_MAC + if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 ) + for ( i=0; i < NODE_ADDRESS_SIZE; i++ ) + nic->enetaddr[i] = (CONFIG_E1000_FALLBACK_MAC >> (8*(5-i))) & 0xff; +#endif #else /* * The AP1000's e1000 has no eeprom; the MAC address is stored in the @@ -639,6 +645,9 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546EB_FIBER: hw->mac_type = e1000_82546; break; + case E1000_DEV_ID_82541ER: + hw->mac_type = e1000_82541_rev_2; + break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; @@ -2485,6 +2494,36 @@ e1000_phy_reset(struct e1000_hw *hw) return 0; } +static int +e1000_set_phy_type(struct e1000_hw *hw) +{ + DEBUGFUNC(); + + if(hw->mac_type == e1000_undefined) + return -E1000_ERR_PHY_TYPE; + + switch(hw->phy_id) { + case M88E1000_E_PHY_ID: + case M88E1000_I_PHY_ID: + case M88E1011_I_PHY_ID: + hw->phy_type = e1000_phy_m88; + break; + case IGP01E1000_I_PHY_ID: + if(hw->mac_type == e1000_82541 || + hw->mac_type == e1000_82541_rev_2) { + hw->phy_type = e1000_phy_igp; + break; + } + /* Fall Through */ + default: + /* Should never have loaded on this device */ + hw->phy_type = e1000_phy_undefined; + return -E1000_ERR_PHY_TYPE; + } + + return E1000_SUCCESS; +} + /****************************************************************************** * Probes the expected PHY address for known PHY IDs * @@ -2493,6 +2532,7 @@ e1000_phy_reset(struct e1000_hw *hw) static int e1000_detect_gig_phy(struct e1000_hw *hw) { + int32_t phy_init_status; uint16_t phy_id_high, phy_id_low; int match = FALSE; @@ -2526,11 +2566,19 @@ e1000_detect_gig_phy(struct e1000_hw *hw) if (hw->phy_id == M88E1011_I_PHY_ID) match = TRUE; break; + case e1000_82541_rev_2: + if(hw->phy_id == IGP01E1000_I_PHY_ID) + match = TRUE; + + break; default: DEBUGOUT("Invalid MAC type %d\n", hw->mac_type); return -E1000_ERR_CONFIG; } - if (match) { + + phy_init_status = e1000_set_phy_type(hw); + + if ((match) && (phy_init_status == E1000_SUCCESS)) { DEBUGOUT("PHY ID 0x%X detected\n", hw->phy_id); return 0; } @@ -2985,7 +3033,7 @@ e1000_initialize(bd_t * bis) free(nic); return 0; } -#ifndef CONFIG_AP1000 +#if !(defined(CONFIG_AP1000) || defined(CONFIG_MVBC_1G)) if (e1000_validate_eeprom_checksum(nic) < 0) { printf("The EEPROM Checksum Is Not Valid\n"); free(hw); diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 0fbdc90..822afc5 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -71,6 +71,8 @@ typedef enum { e1000_82540, e1000_82545, e1000_82546, + e1000_82541, + e1000_82541_rev_2, e1000_num_macs } e1000_mac_type; @@ -168,6 +170,13 @@ typedef enum { e1000_1000t_rx_status_undefined = 0xFF } e1000_1000t_rx_status; +typedef enum { + e1000_phy_m88 = 0, + e1000_phy_igp, + e1000_phy_igp_2, + e1000_phy_undefined = 0xFF +} e1000_phy_type; + struct e1000_phy_info { e1000_cable_length cable_length; e1000_10bt_ext_dist_enable extended_10bt_distance; @@ -184,14 +193,19 @@ struct e1000_phy_stats { }; /* Error Codes */ -#define E1000_SUCCESS 0 -#define E1000_ERR_EEPROM 1 -#define E1000_ERR_PHY 2 -#define E1000_ERR_CONFIG 3 -#define E1000_ERR_PARAM 4 -#define E1000_ERR_MAC_TYPE 5 -#define E1000_ERR_NOLINK 6 -#define E1000_ERR_TIMEOUT 7 +#define E1000_SUCCESS 0 +#define E1000_ERR_EEPROM 1 +#define E1000_ERR_PHY 2 +#define E1000_ERR_CONFIG 3 +#define E1000_ERR_PARAM 4 +#define E1000_ERR_MAC_TYPE 5 +#define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_NOLINK 7 +#define E1000_ERR_TIMEOUT 8 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 /* PCI Device IDs */ #define E1000_DEV_ID_82542 0x1000 @@ -207,7 +221,8 @@ struct e1000_phy_stats { #define E1000_DEV_ID_82545EM_FIBER 0x1011 #define E1000_DEV_ID_82546EB_COPPER 0x1010 #define E1000_DEV_ID_82546EB_FIBER 0x1012 -#define NUM_DEV_IDS 13 +#define E1000_DEV_ID_82541ER 0x1078 +#define NUM_DEV_IDS 14 #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -799,6 +814,8 @@ struct e1000_hw { pci_dev_t pdev; uint8_t *hw_addr; e1000_mac_type mac_type; + e1000_phy_type phy_type; + uint32_t phy_init_script; e1000_media_type media_type; e1000_lan_loc lan_loc; e1000_fc_type fc; @@ -1517,7 +1534,22 @@ struct e1000_hw { #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ #define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ -#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ + +/* IGP01E1000 specifics */ +#define IGP01E1000_IEEE_REGS_PAGE 0x0000 +#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300 +#define IGP01E1000_IEEE_FORCE_GIGA 0x0140 + +/* IGP01E1000 Specific Registers */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ +#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ +#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ /* PHY Control Register */ #define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ @@ -1729,6 +1761,7 @@ struct e1000_hw { #define M88E1011_I_PHY_ID 0x01410C20 #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID +#define IGP01E1000_I_PHY_ID 0x02A80380 /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF diff --git a/drivers/net/greth.c b/drivers/net/greth.c new file mode 100644 index 0000000..76ece59 --- /dev/null +++ b/drivers/net/greth.c @@ -0,0 +1,661 @@ +/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver + * + * Driver use polling mode (no Interrupt) + * + * (C) Copyright 2007 + * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <net.h> +#include <malloc.h> +#include <asm/processor.h> +#include <ambapp.h> +#include <asm/leon.h> + +/* #define DEBUG */ + +#include "greth.h" + +/* Default to 3s timeout on autonegotiation */ +#ifndef GRETH_PHY_TIMEOUT_MS +#define GRETH_PHY_TIMEOUT_MS 3000 +#endif + +/* ByPass Cache when reading regs */ +#define GRETH_REGLOAD(addr) SPARC_NOCACHE_READ(addr) +/* Write-through cache ==> no bypassing needed on writes */ +#define GRETH_REGSAVE(addr,data) (*(unsigned int *)(addr) = (data)) +#define GRETH_REGORIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)|data) +#define GRETH_REGANDIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)&data) + +#define GRETH_RXBD_CNT 4 +#define GRETH_TXBD_CNT 1 + +#define GRETH_RXBUF_SIZE 1540 +#define GRETH_BUF_ALIGN 4 +#define GRETH_RXBUF_EFF_SIZE \ + ( (GRETH_RXBUF_SIZE&~(GRETH_BUF_ALIGN-1))+GRETH_BUF_ALIGN ) + +typedef struct { + greth_regs *regs; + int irq; + struct eth_device *dev; + + /* Hardware info */ + unsigned char phyaddr; + int gbit_mac; + + /* Current operating Mode */ + int gb; /* GigaBit */ + int fd; /* Full Duplex */ + int sp; /* 10/100Mbps speed (1=100,0=10) */ + int auto_neg; /* Auto negotiate done */ + + unsigned char hwaddr[6]; /* MAC Address */ + + /* Descriptors */ + greth_bd *rxbd_base, *rxbd_max; + greth_bd *txbd_base, *txbd_max; + + greth_bd *rxbd_curr; + + /* rx buffers in rx descriptors */ + void *rxbuf_base; /* (GRETH_RXBUF_SIZE+ALIGNBYTES) * GRETH_RXBD_CNT */ + + /* unused for gbit_mac, temp buffer for sending packets with unligned + * start. + * Pointer to packet allocated with malloc. + */ + void *txbuf; + + struct { + /* rx status */ + unsigned int rx_packets, + rx_crc_errors, rx_frame_errors, rx_length_errors, rx_errors; + + /* tx stats */ + unsigned int tx_packets, + tx_latecol_errors, + tx_underrun_errors, tx_limit_errors, tx_errors; + } stats; +} greth_priv; + +/* Read MII register 'addr' from core 'regs' */ +static int read_mii(int addr, volatile greth_regs * regs) +{ + while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) { + } + + GRETH_REGSAVE(®s->mdio, (0 << 11) | ((addr & 0x1F) << 6) | 2); + + while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) { + } + + if (!(GRETH_REGLOAD(®s->mdio) & GRETH_MII_NVALID)) { + return (GRETH_REGLOAD(®s->mdio) >> 16) & 0xFFFF; + } else { + return -1; + } +} + +static void write_mii(int addr, int data, volatile greth_regs * regs) +{ + while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) { + } + + GRETH_REGSAVE(®s->mdio, + ((data & 0xFFFF) << 16) | (0 << 11) | ((addr & 0x1F) << 6) + | 1); + + while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) { + } + +} + +/* init/start hardware and allocate descriptor buffers for rx side + * + */ +int greth_init(struct eth_device *dev, bd_t * bis) +{ + int i; + + greth_priv *greth = dev->priv; + greth_regs *regs = greth->regs; +#ifdef DEBUG + printf("greth_init\n"); +#endif + + GRETH_REGSAVE(®s->control, 0); + + if (!greth->rxbd_base) { + + /* allocate descriptors */ + greth->rxbd_base = (greth_bd *) + memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd)); + greth->txbd_base = (greth_bd *) + memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd)); + + /* allocate buffers to all descriptors */ + greth->rxbuf_base = + malloc(GRETH_RXBUF_EFF_SIZE * GRETH_RXBD_CNT); + } + + /* initate rx decriptors */ + for (i = 0; i < GRETH_RXBD_CNT; i++) { + greth->rxbd_base[i].addr = (unsigned int) + greth->rxbuf_base + (GRETH_RXBUF_EFF_SIZE * i); + /* enable desciptor & set wrap bit if last descriptor */ + if (i >= (GRETH_RXBD_CNT - 1)) { + greth->rxbd_base[i].stat = GRETH_BD_EN | GRETH_BD_WR; + } else { + greth->rxbd_base[i].stat = GRETH_BD_EN; + } + } + + /* initiate indexes */ + greth->rxbd_curr = greth->rxbd_base; + greth->rxbd_max = greth->rxbd_base + (GRETH_RXBD_CNT - 1); + greth->txbd_max = greth->txbd_base + (GRETH_TXBD_CNT - 1); + /* + * greth->txbd_base->addr = 0; + * greth->txbd_base->stat = GRETH_BD_WR; + */ + + /* initate tx decriptors */ + for (i = 0; i < GRETH_TXBD_CNT; i++) { + greth->txbd_base[i].addr = 0; + /* enable desciptor & set wrap bit if last descriptor */ + if (i >= (GRETH_RXBD_CNT - 1)) { + greth->txbd_base[i].stat = GRETH_BD_WR; + } else { + greth->txbd_base[i].stat = 0; + } + } + + /**** SET HARDWARE REGS ****/ + + /* Set pointer to tx/rx descriptor areas */ + GRETH_REGSAVE(®s->rx_desc_p, (unsigned int)&greth->rxbd_base[0]); + GRETH_REGSAVE(®s->tx_desc_p, (unsigned int)&greth->txbd_base[0]); + + /* Enable Transmitter, GRETH will now scan descriptors for packets + * to transmitt */ +#ifdef DEBUG + printf("greth_init: enabling receiver\n"); +#endif + GRETH_REGORIN(®s->control, GRETH_RXEN); + + return 0; +} + +/* Initiate PHY to a relevant speed + * return: + * - 0 = success + * - 1 = timeout/fail + */ +int greth_init_phy(greth_priv * dev, bd_t * bis) +{ + greth_regs *regs = dev->regs; + int tmp, tmp1, tmp2, i; + unsigned int start, timeout; + + /* X msecs to ticks */ + timeout = usec2ticks(GRETH_PHY_TIMEOUT_MS * 1000); + + /* Get system timer0 current value + * Total timeout is 5s + */ + start = get_timer(0); + + /* get phy control register default values */ + + while ((tmp = read_mii(0, regs)) & 0x8000) { + if (get_timer(start) > timeout) + return 1; /* Fail */ + } + + /* reset PHY and wait for completion */ + write_mii(0, 0x8000 | tmp, regs); + + while (((tmp = read_mii(0, regs))) & 0x8000) { + if (get_timer(start) > timeout) + return 1; /* Fail */ + } + + /* Check if PHY is autoneg capable and then determine operating + * mode, otherwise force it to 10 Mbit halfduplex + */ + dev->gb = 0; + dev->fd = 0; + dev->sp = 0; + dev->auto_neg = 0; + if (!((tmp >> 12) & 1)) { + write_mii(0, 0, regs); + } else { + /* wait for auto negotiation to complete and then check operating mode */ + dev->auto_neg = 1; + i = 0; + while (!(((tmp = read_mii(1, regs)) >> 5) & 1)) { + if (get_timer(start) > timeout) { + printf("Auto negotiation timed out. " + "Selecting default config\n"); + tmp = read_mii(0, regs); + dev->gb = ((tmp >> 6) & 1) + && !((tmp >> 13) & 1); + dev->sp = !((tmp >> 6) & 1) + && ((tmp >> 13) & 1); + dev->fd = (tmp >> 8) & 1; + goto auto_neg_done; + } + } + if ((tmp >> 8) & 1) { + tmp1 = read_mii(9, regs); + tmp2 = read_mii(10, regs); + if ((tmp1 & GRETH_MII_EXTADV_1000FD) && + (tmp2 & GRETH_MII_EXTPRT_1000FD)) { + dev->gb = 1; + dev->fd = 1; + } + if ((tmp1 & GRETH_MII_EXTADV_1000HD) && + (tmp2 & GRETH_MII_EXTPRT_1000HD)) { + dev->gb = 1; + dev->fd = 0; + } + } + if ((dev->gb == 0) || ((dev->gb == 1) && (dev->gbit_mac == 0))) { + tmp1 = read_mii(4, regs); + tmp2 = read_mii(5, regs); + if ((tmp1 & GRETH_MII_100TXFD) && + (tmp2 & GRETH_MII_100TXFD)) { + dev->sp = 1; + dev->fd = 1; + } + if ((tmp1 & GRETH_MII_100TXHD) && + (tmp2 & GRETH_MII_100TXHD)) { + dev->sp = 1; + dev->fd = 0; + } + if ((tmp1 & GRETH_MII_10FD) && (tmp2 & GRETH_MII_10FD)) { + dev->fd = 1; + } + if ((dev->gb == 1) && (dev->gbit_mac == 0)) { + dev->gb = 0; + dev->fd = 0; + write_mii(0, dev->sp << 13, regs); + } + } + + } + auto_neg_done: +#ifdef DEBUG + printf("%s GRETH Ethermac at [0x%x] irq %d. Running \ + %d Mbps %s duplex\n", dev->gbit_mac ? "10/100/1000" : "10/100", (unsigned int)(regs), (unsigned int)(dev->irq), dev->gb ? 1000 : (dev->sp ? 100 : 10), dev->fd ? "full" : "half"); +#endif + /* Read out PHY info if extended registers are available */ + if (tmp & 1) { + tmp1 = read_mii(2, regs); + tmp2 = read_mii(3, regs); + tmp1 = (tmp1 << 6) | ((tmp2 >> 10) & 0x3F); + tmp = tmp2 & 0xF; + + tmp2 = (tmp2 >> 4) & 0x3F; +#ifdef DEBUG + printf("PHY: Vendor %x Device %x Revision %d\n", tmp1, + tmp2, tmp); +#endif + } else { + printf("PHY info not available\n"); + } + + /* set speed and duplex bits in control register */ + GRETH_REGORIN(®s->control, + (dev->gb << 8) | (dev->sp << 7) | (dev->fd << 4)); + + return 0; +} + +void greth_halt(struct eth_device *dev) +{ + greth_priv *greth; + greth_regs *regs; + int i; +#ifdef DEBUG + printf("greth_halt\n"); +#endif + if (!dev || !dev->priv) + return; + + greth = dev->priv; + regs = greth->regs; + + if (!regs) + return; + + /* disable receiver/transmitter by clearing the enable bits */ + GRETH_REGANDIN(®s->control, ~(GRETH_RXEN | GRETH_TXEN)); + + /* reset rx/tx descriptors */ + if (greth->rxbd_base) { + for (i = 0; i < GRETH_RXBD_CNT; i++) { + greth->rxbd_base[i].stat = + (i >= (GRETH_RXBD_CNT - 1)) ? GRETH_BD_WR : 0; + } + } + + if (greth->txbd_base) { + for (i = 0; i < GRETH_TXBD_CNT; i++) { + greth->txbd_base[i].stat = + (i >= (GRETH_TXBD_CNT - 1)) ? GRETH_BD_WR : 0; + } + } +} + +int greth_send(struct eth_device *dev, volatile void *eth_data, int data_length) +{ + greth_priv *greth = dev->priv; + greth_regs *regs = greth->regs; + greth_bd *txbd; + void *txbuf; + unsigned int status; +#ifdef DEBUG + printf("greth_send\n"); +#endif + /* send data, wait for data to be sent, then return */ + if (((unsigned int)eth_data & (GRETH_BUF_ALIGN - 1)) + && !greth->gbit_mac) { + /* data not aligned as needed by GRETH 10/100, solve this by allocating 4 byte aligned buffer + * and copy data to before giving it to GRETH. + */ + if (!greth->txbuf) { + greth->txbuf = malloc(GRETH_RXBUF_SIZE); +#ifdef DEBUG + printf("GRETH: allocated aligned tx-buf\n"); +#endif + } + + txbuf = greth->txbuf; + + /* copy data info buffer */ + memcpy((char *)txbuf, (char *)eth_data, data_length); + + /* keep buffer to next time */ + } else { + txbuf = (void *)eth_data; + } + /* get descriptor to use, only 1 supported... hehe easy */ + txbd = greth->txbd_base; + + /* setup descriptor to wrap around to it self */ + txbd->addr = (unsigned int)txbuf; + txbd->stat = GRETH_BD_EN | GRETH_BD_WR | data_length; + + /* Remind Core which descriptor to use when sending */ + GRETH_REGSAVE(®s->tx_desc_p, (unsigned int)txbd); + + /* initate send by enabling transmitter */ + GRETH_REGORIN(®s->control, GRETH_TXEN); + + /* Wait for data to be sent */ + while ((status = GRETH_REGLOAD(&txbd->stat)) & GRETH_BD_EN) { + ; + } + + /* was the packet transmitted succesfully? */ + if (status & GRETH_TXBD_ERR_AL) { + greth->stats.tx_limit_errors++; + } + + if (status & GRETH_TXBD_ERR_UE) { + greth->stats.tx_underrun_errors++; + } + + if (status & GRETH_TXBD_ERR_LC) { + greth->stats.tx_latecol_errors++; + } + + if (status & + (GRETH_TXBD_ERR_LC | GRETH_TXBD_ERR_UE | GRETH_TXBD_ERR_AL)) { + /* any error */ + greth->stats.tx_errors++; + return -1; + } + + /* bump tx packet counter */ + greth->stats.tx_packets++; + + /* return succefully */ + return 0; +} + +int greth_recv(struct eth_device *dev) +{ + greth_priv *greth = dev->priv; + greth_regs *regs = greth->regs; + greth_bd *rxbd; + unsigned int status, len = 0, bad; + unsigned char *d; + int enable = 0; + int i; +#ifdef DEBUG +/* printf("greth_recv\n"); */ +#endif + /* Receive One packet only, but clear as many error packets as there are + * available. + */ + { + /* current receive descriptor */ + rxbd = greth->rxbd_curr; + + /* get status of next received packet */ + status = GRETH_REGLOAD(&rxbd->stat); + + bad = 0; + + /* stop if no more packets received */ + if (status & GRETH_BD_EN) { + goto done; + } +#ifdef DEBUG + printf("greth_recv: packet 0x%lx, 0x%lx, len: %d\n", + (unsigned int)rxbd, status, status & GRETH_BD_LEN); +#endif + + /* Check status for errors. + */ + if (status & GRETH_RXBD_ERR_FT) { + greth->stats.rx_length_errors++; + bad = 1; + } + if (status & (GRETH_RXBD_ERR_AE | GRETH_RXBD_ERR_OE)) { + greth->stats.rx_frame_errors++; + bad = 1; + } + if (status & GRETH_RXBD_ERR_CRC) { + greth->stats.rx_crc_errors++; + bad = 1; + } + if (bad) { + greth->stats.rx_errors++; + printf + ("greth_recv: Bad packet (%d, %d, %d, 0x%08x, %d)\n", + greth->stats.rx_length_errors, + greth->stats.rx_frame_errors, + greth->stats.rx_crc_errors, status, + greth->stats.rx_packets); + /* print all rx descriptors */ + for (i = 0; i < GRETH_RXBD_CNT; i++) { + printf("[%d]: Stat=0x%lx, Addr=0x%lx\n", i, + GRETH_REGLOAD(&greth->rxbd_base[i].stat), + GRETH_REGLOAD(&greth->rxbd_base[i]. + addr)); + } + } else { + /* Process the incoming packet. */ + len = status & GRETH_BD_LEN; + d = (char *)rxbd->addr; +#ifdef DEBUG + printf + ("greth_recv: new packet, length: %d. data: %x %x %x %x %x %x %x %x\n", + len, d[0], d[1], d[2], d[3], d[4], d[5], d[6], + d[7]); +#endif + /* flush all data cache to make sure we're not reading old packet data */ + sparc_dcache_flush_all(); + + /* pass packet on to network subsystem */ + NetReceive((void *)d, len); + + /* bump stats counters */ + greth->stats.rx_packets++; + + /* bad is now 0 ==> will stop loop */ + } + + /* reenable descriptor to receive more packet with this descriptor, wrap around if needed */ + rxbd->stat = + GRETH_BD_EN | + (((unsigned int)greth->rxbd_curr >= + (unsigned int)greth->rxbd_max) ? GRETH_BD_WR : 0); + enable = 1; + + /* increase index */ + greth->rxbd_curr = + ((unsigned int)greth->rxbd_curr >= + (unsigned int)greth->rxbd_max) ? greth-> + rxbd_base : (greth->rxbd_curr + 1); + + }; + + if (enable) { + GRETH_REGORIN(®s->control, GRETH_RXEN); + } + done: + /* return positive length of packet or 0 if non recieved */ + return len; +} + +void greth_set_hwaddr(greth_priv * greth, unsigned char *mac) +{ + /* save new MAC address */ + greth->dev->enetaddr[0] = greth->hwaddr[0] = mac[0]; + greth->dev->enetaddr[1] = greth->hwaddr[1] = mac[1]; + greth->dev->enetaddr[2] = greth->hwaddr[2] = mac[2]; + greth->dev->enetaddr[3] = greth->hwaddr[3] = mac[3]; + greth->dev->enetaddr[4] = greth->hwaddr[4] = mac[4]; + greth->dev->enetaddr[5] = greth->hwaddr[5] = mac[5]; + greth->regs->esa_msb = (mac[0] << 8) | mac[1]; + greth->regs->esa_lsb = + (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5]; +#ifdef DEBUG + printf("GRETH: New MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); +#endif +} + +int greth_initialize(bd_t * bis) +{ + greth_priv *greth; + ambapp_apbdev apbdev; + struct eth_device *dev; + int i; + char *addr_str, *end; + unsigned char addr[6]; +#ifdef DEBUG + printf("Scanning for GRETH\n"); +#endif + /* Find Device & IRQ via AMBA Plug&Play information */ + if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_ETHMAC, &apbdev) != 1) { + return -1; /* GRETH not found */ + } + + greth = (greth_priv *) malloc(sizeof(greth_priv)); + dev = (struct eth_device *)malloc(sizeof(struct eth_device)); + memset(dev, 0, sizeof(struct eth_device)); + memset(greth, 0, sizeof(greth_priv)); + + greth->regs = (greth_regs *) apbdev.address; + greth->irq = apbdev.irq; +#ifdef DEBUG + printf("Found GRETH at 0x%lx, irq %d\n", greth->regs, greth->irq); +#endif + dev->priv = (void *)greth; + dev->iobase = (unsigned int)greth->regs; + dev->init = greth_init; + dev->halt = greth_halt; + dev->send = greth_send; + dev->recv = greth_recv; + greth->dev = dev; + + /* Reset Core */ + GRETH_REGSAVE(&greth->regs->control, GRETH_RESET); + + /* Wait for core to finish reset cycle */ + while (GRETH_REGLOAD(&greth->regs->control) & GRETH_RESET) ; + + /* Get the phy address which assumed to have been set + correctly with the reset value in hardware */ + greth->phyaddr = (GRETH_REGLOAD(&greth->regs->mdio) >> 11) & 0x1F; + + /* Check if mac is gigabit capable */ + greth->gbit_mac = (GRETH_REGLOAD(&greth->regs->control) >> 27) & 1; + + /* Make descriptor string */ + if (greth->gbit_mac) { + sprintf(dev->name, "GRETH 10/100/GB"); + } else { + sprintf(dev->name, "GRETH 10/100"); + } + + /* initiate PHY, select speed/duplex depending on connected PHY */ + if (greth_init_phy(greth, bis)) { + /* Failed to init PHY (timedout) */ + return -1; + } + + /* Register Device to EtherNet subsystem */ + eth_register(dev); + + /* Get MAC address */ + if ((addr_str = getenv("ethaddr")) != NULL) { + for (i = 0; i < 6; i++) { + addr[i] = + addr_str ? simple_strtoul(addr_str, &end, 16) : 0; + if (addr_str) { + addr_str = (*end) ? end + 1 : end; + } + } + } else { + /* HW Address not found in environment, Set default HW address */ + addr[0] = GRETH_HWADDR_0; /* MSB */ + addr[1] = GRETH_HWADDR_1; + addr[2] = GRETH_HWADDR_2; + addr[3] = GRETH_HWADDR_3; + addr[4] = GRETH_HWADDR_4; + addr[5] = GRETH_HWADDR_5; /* LSB */ + } + + /* set and remember MAC address */ + greth_set_hwaddr(greth, addr); + + return 1; +} diff --git a/drivers/net/greth.h b/drivers/net/greth.h new file mode 100644 index 0000000..7d5fbd3 --- /dev/null +++ b/drivers/net/greth.h @@ -0,0 +1,97 @@ +/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver + * + * (C) Copyright 2007 + * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define GRETH_FD 0x10 +#define GRETH_RESET 0x40 +#define GRETH_MII_BUSY 0x8 +#define GRETH_MII_NVALID 0x10 + +/* MII registers */ +#define GRETH_MII_EXTADV_1000FD 0x00000200 +#define GRETH_MII_EXTADV_1000HD 0x00000100 +#define GRETH_MII_EXTPRT_1000FD 0x00000800 +#define GRETH_MII_EXTPRT_1000HD 0x00000400 + +#define GRETH_MII_100T4 0x00000200 +#define GRETH_MII_100TXFD 0x00000100 +#define GRETH_MII_100TXHD 0x00000080 +#define GRETH_MII_10FD 0x00000040 +#define GRETH_MII_10HD 0x00000020 + +#define GRETH_BD_EN 0x800 +#define GRETH_BD_WR 0x1000 +#define GRETH_BD_IE 0x2000 +#define GRETH_BD_LEN 0x7FF + +#define GRETH_TXEN 0x1 +#define GRETH_INT_TX 0x8 +#define GRETH_TXI 0x4 +#define GRETH_TXBD_STATUS 0x0001C000 +#define GRETH_TXBD_MORE 0x20000 +#define GRETH_TXBD_IPCS 0x40000 +#define GRETH_TXBD_TCPCS 0x80000 +#define GRETH_TXBD_UDPCS 0x100000 +#define GRETH_TXBD_ERR_LC 0x10000 +#define GRETH_TXBD_ERR_UE 0x4000 +#define GRETH_TXBD_ERR_AL 0x8000 +#define GRETH_TXBD_NUM 128 +#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1) +#define GRETH_TX_BUF_SIZE 2048 + +#define GRETH_INT_RX 0x4 +#define GRETH_RXEN 0x2 +#define GRETH_RXI 0x8 +#define GRETH_RXBD_STATUS 0xFFFFC000 +#define GRETH_RXBD_ERR_AE 0x4000 +#define GRETH_RXBD_ERR_FT 0x8000 +#define GRETH_RXBD_ERR_CRC 0x10000 +#define GRETH_RXBD_ERR_OE 0x20000 +#define GRETH_RXBD_ERR_LE 0x40000 +#define GRETH_RXBD_IP_DEC 0x80000 +#define GRETH_RXBD_IP_CSERR 0x100000 +#define GRETH_RXBD_UDP_DEC 0x200000 +#define GRETH_RXBD_UDP_CSERR 0x400000 +#define GRETH_RXBD_TCP_DEC 0x800000 +#define GRETH_RXBD_TCP_CSERR 0x1000000 + +#define GRETH_RXBD_NUM 128 +#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1) +#define GRETH_RX_BUF_SIZE 2048 + +/* Ethernet configuration registers */ +typedef struct _greth_regs { + volatile unsigned int control; + volatile unsigned int status; + volatile unsigned int esa_msb; + volatile unsigned int esa_lsb; + volatile unsigned int mdio; + volatile unsigned int tx_desc_p; + volatile unsigned int rx_desc_p; +} greth_regs; + +/* Ethernet buffer descriptor */ +typedef struct _greth_bd { + volatile unsigned int stat; + unsigned int addr; /* Buffer address not changed by HW */ +} greth_bd; diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 9c98338..703784e 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -417,13 +417,13 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) /* choose RMII or MII mode. This depends on the board */ #ifdef CONFIG_RMII -#ifdef CONFIG_AT91CAP9ADK +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); #endif #else -#ifdef CONFIG_AT91CAP9ADK +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 3b81258..71d1960 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -166,6 +166,13 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) /* Activate transmit Buffer Descriptor polling */ fecp->tdar = 0x01000000; /* Descriptor polling active */ + /* FEC fix for MCF5275, FEC unable to initial transmit data packet. + * A nop will ensure the descriptor polling active completed. + */ +#ifdef CONFIG_M5275 + __asm__ ("nop"); +#endif + #ifdef CFG_UNIFY_CACHE icache_invalid(); #endif diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h index 8dcbb3e..96ff04d 100644 --- a/drivers/net/smc91111.h +++ b/drivers/net/smc91111.h @@ -79,7 +79,7 @@ typedef unsigned long int dword; #ifdef CONFIG_XSENGINE #define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1)))) #define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r<<1)))) -#define SMC_inb(p) ({ \ +#define SMC_inb(p) ({ \ unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p<<1)); \ unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \ if (__p & 2) __v >>= 8; \ @@ -176,7 +176,76 @@ typedef unsigned long int dword; }; \ }) -#else /* if not CONFIG_PXA250 */ +#elif defined(CONFIG_LEON) /* if not CONFIG_PXA250 */ + +#define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); }) + +#define SMC_LEON_SWAP32(_x_) \ + ({ dword _x = (_x_); \ + ((_x << 24) | \ + ((0x0000FF00UL & _x) << 8) | \ + ((0x00FF0000UL & _x) >> 8) | \ + (_x >> 24)); }) + +#define SMC_inl(r) (SMC_LEON_SWAP32((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))))) +#define SMC_inl_nosw(r) ((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0)))) +#define SMC_inw(r) (SMC_LEON_SWAP16((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))))) +#define SMC_inw_nosw(r) ((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0)))) +#define SMC_inb(p) ({ \ + word ___v = SMC_inw((p) & ~1); \ + if ((p) & 1) ___v >>= 8; \ + else ___v &= 0xff; \ + ___v; }) + +#define SMC_outl(d,r) (*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))=SMC_LEON_SWAP32(d)) +#define SMC_outl_nosw(d,r) (*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))=(d)) +#define SMC_outw(d,r) (*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))=SMC_LEON_SWAP16(d)) +#define SMC_outw_nosw(d,r) (*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))=(d)) +#define SMC_outb(d,r) do{ word __d = (byte)(d); \ + word __w = SMC_inw((r)&~1); \ + __w &= ((r)&1) ? 0x00FF : 0xFF00; \ + __w |= ((r)&1) ? __d<<8 : __d; \ + SMC_outw(__w,(r)&~1); \ + }while(0) +#define SMC_outsl(r,b,l) do{ int __i; \ + dword *__b2; \ + __b2 = (dword *) b; \ + for (__i = 0; __i < l; __i++) { \ + SMC_outl_nosw( *(__b2 + __i), r); \ + } \ + }while(0) +#define SMC_outsw(r,b,l) do{ int __i; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + SMC_outw_nosw( *(__b2 + __i), r); \ + } \ + }while(0) +#define SMC_insl(r,b,l) do{ int __i ; \ + dword *__b2; \ + __b2 = (dword *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inl_nosw(r); \ + }; \ + }while(0) + +#define SMC_insw(r,b,l) do{ int __i ; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inw_nosw(r); \ + }; \ + }while(0) + +#define SMC_insb(r,b,l) do{ int __i ; \ + byte *__b2; \ + __b2 = (byte *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inb(r); \ + }; \ + }while(0) + +#else /* if not CONFIG_PXA250 and not CONFIG_LEON */ #ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */ /* diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c new file mode 100644 index 0000000..2fd5777 --- /dev/null +++ b/drivers/net/smc911x.c @@ -0,0 +1,680 @@ +/* + * SMSC LAN9[12]1[567] Network driver + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#ifdef CONFIG_DRIVER_SMC911X + +#include <command.h> +#include <net.h> +#include <miiphy.h> + +#define mdelay(n) udelay((n)*1000) + +#define __REG(x) (*((volatile u32 *)(x))) + +/* Below are the register offsets and bit definitions + * of the Lan911x memory space + */ +#define RX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00) + +#define TX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20) +#define TX_CMD_A_INT_ON_COMP (0x80000000) +#define TX_CMD_A_INT_BUF_END_ALGN (0x03000000) +#define TX_CMD_A_INT_4_BYTE_ALGN (0x00000000) +#define TX_CMD_A_INT_16_BYTE_ALGN (0x01000000) +#define TX_CMD_A_INT_32_BYTE_ALGN (0x02000000) +#define TX_CMD_A_INT_DATA_OFFSET (0x001F0000) +#define TX_CMD_A_INT_FIRST_SEG (0x00002000) +#define TX_CMD_A_INT_LAST_SEG (0x00001000) +#define TX_CMD_A_BUF_SIZE (0x000007FF) +#define TX_CMD_B_PKT_TAG (0xFFFF0000) +#define TX_CMD_B_ADD_CRC_DISABLE (0x00002000) +#define TX_CMD_B_DISABLE_PADDING (0x00001000) +#define TX_CMD_B_PKT_BYTE_LENGTH (0x000007FF) + +#define RX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x40) +#define RX_STS_PKT_LEN (0x3FFF0000) +#define RX_STS_ES (0x00008000) +#define RX_STS_BCST (0x00002000) +#define RX_STS_LEN_ERR (0x00001000) +#define RX_STS_RUNT_ERR (0x00000800) +#define RX_STS_MCAST (0x00000400) +#define RX_STS_TOO_LONG (0x00000080) +#define RX_STS_COLL (0x00000040) +#define RX_STS_ETH_TYPE (0x00000020) +#define RX_STS_WDOG_TMT (0x00000010) +#define RX_STS_MII_ERR (0x00000008) +#define RX_STS_DRIBBLING (0x00000004) +#define RX_STS_CRC_ERR (0x00000002) +#define RX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x44) +#define TX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x48) +#define TX_STS_TAG (0xFFFF0000) +#define TX_STS_ES (0x00008000) +#define TX_STS_LOC (0x00000800) +#define TX_STS_NO_CARR (0x00000400) +#define TX_STS_LATE_COLL (0x00000200) +#define TX_STS_MANY_COLL (0x00000100) +#define TX_STS_COLL_CNT (0x00000078) +#define TX_STS_MANY_DEFER (0x00000004) +#define TX_STS_UNDERRUN (0x00000002) +#define TX_STS_DEFERRED (0x00000001) +#define TX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C) +#define ID_REV __REG(CONFIG_DRIVER_SMC911X_BASE + 0x50) +#define ID_REV_CHIP_ID (0xFFFF0000) /* RO */ +#define ID_REV_REV_ID (0x0000FFFF) /* RO */ + +#define INT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x54) +#define INT_CFG_INT_DEAS (0xFF000000) /* R/W */ +#define INT_CFG_INT_DEAS_CLR (0x00004000) +#define INT_CFG_INT_DEAS_STS (0x00002000) +#define INT_CFG_IRQ_INT (0x00001000) /* RO */ +#define INT_CFG_IRQ_EN (0x00000100) /* R/W */ +#define INT_CFG_IRQ_POL (0x00000010) /* R/W */ + /* Not Affected by SW Reset */ +#define INT_CFG_IRQ_TYPE (0x00000001) /* R/W */ + /* Not Affected by SW Reset */ + +#define INT_STS __REG(CONFIG_DRIVER_SMC911X_BASE + 0x58) +#define INT_STS_SW_INT (0x80000000) /* R/WC */ +#define INT_STS_TXSTOP_INT (0x02000000) /* R/WC */ +#define INT_STS_RXSTOP_INT (0x01000000) /* R/WC */ +#define INT_STS_RXDFH_INT (0x00800000) /* R/WC */ +#define INT_STS_RXDF_INT (0x00400000) /* R/WC */ +#define INT_STS_TX_IOC (0x00200000) /* R/WC */ +#define INT_STS_RXD_INT (0x00100000) /* R/WC */ +#define INT_STS_GPT_INT (0x00080000) /* R/WC */ +#define INT_STS_PHY_INT (0x00040000) /* RO */ +#define INT_STS_PME_INT (0x00020000) /* R/WC */ +#define INT_STS_TXSO (0x00010000) /* R/WC */ +#define INT_STS_RWT (0x00008000) /* R/WC */ +#define INT_STS_RXE (0x00004000) /* R/WC */ +#define INT_STS_TXE (0x00002000) /* R/WC */ +/*#define INT_STS_ERX (0x00001000)*/ /* R/WC */ +#define INT_STS_TDFU (0x00000800) /* R/WC */ +#define INT_STS_TDFO (0x00000400) /* R/WC */ +#define INT_STS_TDFA (0x00000200) /* R/WC */ +#define INT_STS_TSFF (0x00000100) /* R/WC */ +#define INT_STS_TSFL (0x00000080) /* R/WC */ +/*#define INT_STS_RXDF (0x00000040)*/ /* R/WC */ +#define INT_STS_RDFO (0x00000040) /* R/WC */ +#define INT_STS_RDFL (0x00000020) /* R/WC */ +#define INT_STS_RSFF (0x00000010) /* R/WC */ +#define INT_STS_RSFL (0x00000008) /* R/WC */ +#define INT_STS_GPIO2_INT (0x00000004) /* R/WC */ +#define INT_STS_GPIO1_INT (0x00000002) /* R/WC */ +#define INT_STS_GPIO0_INT (0x00000001) /* R/WC */ +#define INT_EN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C) +#define INT_EN_SW_INT_EN (0x80000000) /* R/W */ +#define INT_EN_TXSTOP_INT_EN (0x02000000) /* R/W */ +#define INT_EN_RXSTOP_INT_EN (0x01000000) /* R/W */ +#define INT_EN_RXDFH_INT_EN (0x00800000) /* R/W */ +/*#define INT_EN_RXDF_INT_EN (0x00400000)*/ /* R/W */ +#define INT_EN_TIOC_INT_EN (0x00200000) /* R/W */ +#define INT_EN_RXD_INT_EN (0x00100000) /* R/W */ +#define INT_EN_GPT_INT_EN (0x00080000) /* R/W */ +#define INT_EN_PHY_INT_EN (0x00040000) /* R/W */ +#define INT_EN_PME_INT_EN (0x00020000) /* R/W */ +#define INT_EN_TXSO_EN (0x00010000) /* R/W */ +#define INT_EN_RWT_EN (0x00008000) /* R/W */ +#define INT_EN_RXE_EN (0x00004000) /* R/W */ +#define INT_EN_TXE_EN (0x00002000) /* R/W */ +/*#define INT_EN_ERX_EN (0x00001000)*/ /* R/W */ +#define INT_EN_TDFU_EN (0x00000800) /* R/W */ +#define INT_EN_TDFO_EN (0x00000400) /* R/W */ +#define INT_EN_TDFA_EN (0x00000200) /* R/W */ +#define INT_EN_TSFF_EN (0x00000100) /* R/W */ +#define INT_EN_TSFL_EN (0x00000080) /* R/W */ +/*#define INT_EN_RXDF_EN (0x00000040)*/ /* R/W */ +#define INT_EN_RDFO_EN (0x00000040) /* R/W */ +#define INT_EN_RDFL_EN (0x00000020) /* R/W */ +#define INT_EN_RSFF_EN (0x00000010) /* R/W */ +#define INT_EN_RSFL_EN (0x00000008) /* R/W */ +#define INT_EN_GPIO2_INT (0x00000004) /* R/W */ +#define INT_EN_GPIO1_INT (0x00000002) /* R/W */ +#define INT_EN_GPIO0_INT (0x00000001) /* R/W */ + +#define BYTE_TEST __REG(CONFIG_DRIVER_SMC911X_BASE + 0x64) +#define FIFO_INT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x68) +#define FIFO_INT_TX_AVAIL_LEVEL (0xFF000000) /* R/W */ +#define FIFO_INT_TX_STS_LEVEL (0x00FF0000) /* R/W */ +#define FIFO_INT_RX_AVAIL_LEVEL (0x0000FF00) /* R/W */ +#define FIFO_INT_RX_STS_LEVEL (0x000000FF) /* R/W */ + +#define RX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C) +#define RX_CFG_RX_END_ALGN (0xC0000000) /* R/W */ +#define RX_CFG_RX_END_ALGN4 (0x00000000) /* R/W */ +#define RX_CFG_RX_END_ALGN16 (0x40000000) /* R/W */ +#define RX_CFG_RX_END_ALGN32 (0x80000000) /* R/W */ +#define RX_CFG_RX_DMA_CNT (0x0FFF0000) /* R/W */ +#define RX_CFG_RX_DUMP (0x00008000) /* R/W */ +#define RX_CFG_RXDOFF (0x00001F00) /* R/W */ +/*#define RX_CFG_RXBAD (0x00000001)*/ /* R/W */ + +#define TX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x70) +/*#define TX_CFG_TX_DMA_LVL (0xE0000000)*/ /* R/W */ +/*#define TX_CFG_TX_DMA_CNT (0x0FFF0000)*/ /* R/W */ + /* Self Clearing */ +#define TX_CFG_TXS_DUMP (0x00008000) + /* Self Clearing */ +#define TX_CFG_TXD_DUMP (0x00004000) + /* Self Clearing */ +#define TX_CFG_TXSAO (0x00000004) /* R/W */ +#define TX_CFG_TX_ON (0x00000002) /* R/W */ +#define TX_CFG_STOP_TX (0x00000001) + /* Self Clearing */ + +#define HW_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x74) +#define HW_CFG_TTM (0x00200000) /* R/W */ +#define HW_CFG_SF (0x00100000) /* R/W */ +#define HW_CFG_TX_FIF_SZ (0x000F0000) /* R/W */ +#define HW_CFG_TR (0x00003000) /* R/W */ +#define HW_CFG_PHY_CLK_SEL (0x00000060) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_INT_PHY (0x00000000) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_EXT_PHY (0x00000020) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_CLK_DIS (0x00000040) /* R/W */ +#define HW_CFG_SMI_SEL (0x00000010) /* R/W */ +#define HW_CFG_EXT_PHY_DET (0x00000008) /* RO */ +#define HW_CFG_EXT_PHY_EN (0x00000004) /* R/W */ +#define HW_CFG_32_16_BIT_MODE (0x00000004) /* RO */ +#define HW_CFG_SRST_TO (0x00000002) /* RO */ +#define HW_CFG_SRST (0x00000001) + /* Self Clearing */ + +#define RX_DP_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x78) +#define RX_DP_CTRL_RX_FFWD (0x80000000) /* R/W */ +#define RX_DP_CTRL_FFWD_BUSY (0x80000000) /* RO */ + +#define RX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C) +#define RX_FIFO_INF_RXSUSED (0x00FF0000) /* RO */ +#define RX_FIFO_INF_RXDUSED (0x0000FFFF) /* RO */ + +#define TX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x80) +#define TX_FIFO_INF_TSUSED (0x00FF0000) /* RO */ +#define TX_FIFO_INF_TDFREE (0x0000FFFF) /* RO */ + +#define PMT_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x84) +#define PMT_CTRL_PM_MODE (0x00003000) + /* Self Clearing */ +#define PMT_CTRL_PHY_RST (0x00000400) + /* Self Clearing */ +#define PMT_CTRL_WOL_EN (0x00000200) /* R/W */ +#define PMT_CTRL_ED_EN (0x00000100) /* R/W */ +#define PMT_CTRL_PME_TYPE (0x00000040) /* R/W */ + /* Not Affected by SW Reset */ +#define PMT_CTRL_WUPS (0x00000030) /* R/WC */ +#define PMT_CTRL_WUPS_NOWAKE (0x00000000) /* R/WC */ +#define PMT_CTRL_WUPS_ED (0x00000010) /* R/WC */ +#define PMT_CTRL_WUPS_WOL (0x00000020) /* R/WC */ +#define PMT_CTRL_WUPS_MULTI (0x00000030) /* R/WC */ +#define PMT_CTRL_PME_IND (0x00000008) /* R/W */ +#define PMT_CTRL_PME_POL (0x00000004) /* R/W */ +#define PMT_CTRL_PME_EN (0x00000002) /* R/W */ + /* Not Affected by SW Reset */ +#define PMT_CTRL_READY (0x00000001) /* RO */ + +#define GPIO_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x88) +#define GPIO_CFG_LED3_EN (0x40000000) /* R/W */ +#define GPIO_CFG_LED2_EN (0x20000000) /* R/W */ +#define GPIO_CFG_LED1_EN (0x10000000) /* R/W */ +#define GPIO_CFG_GPIO2_INT_POL (0x04000000) /* R/W */ +#define GPIO_CFG_GPIO1_INT_POL (0x02000000) /* R/W */ +#define GPIO_CFG_GPIO0_INT_POL (0x01000000) /* R/W */ +#define GPIO_CFG_EEPR_EN (0x00700000) /* R/W */ +#define GPIO_CFG_GPIOBUF2 (0x00040000) /* R/W */ +#define GPIO_CFG_GPIOBUF1 (0x00020000) /* R/W */ +#define GPIO_CFG_GPIOBUF0 (0x00010000) /* R/W */ +#define GPIO_CFG_GPIODIR2 (0x00000400) /* R/W */ +#define GPIO_CFG_GPIODIR1 (0x00000200) /* R/W */ +#define GPIO_CFG_GPIODIR0 (0x00000100) /* R/W */ +#define GPIO_CFG_GPIOD4 (0x00000010) /* R/W */ +#define GPIO_CFG_GPIOD3 (0x00000008) /* R/W */ +#define GPIO_CFG_GPIOD2 (0x00000004) /* R/W */ +#define GPIO_CFG_GPIOD1 (0x00000002) /* R/W */ +#define GPIO_CFG_GPIOD0 (0x00000001) /* R/W */ + +#define GPT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C) +#define GPT_CFG_TIMER_EN (0x20000000) /* R/W */ +#define GPT_CFG_GPT_LOAD (0x0000FFFF) /* R/W */ + +#define GPT_CNT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x90) +#define GPT_CNT_GPT_CNT (0x0000FFFF) /* RO */ + +#define ENDIAN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x98) +#define FREE_RUN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C) +#define RX_DROP __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0) +#define MAC_CSR_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4) +#define MAC_CSR_CMD_CSR_BUSY (0x80000000) + /* Self Clearing */ +#define MAC_CSR_CMD_R_NOT_W (0x40000000) /* R/W */ +#define MAC_CSR_CMD_CSR_ADDR (0x000000FF) /* R/W */ + +#define MAC_CSR_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8) +#define AFC_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC) +#define AFC_CFG_AFC_HI (0x00FF0000) /* R/W */ +#define AFC_CFG_AFC_LO (0x0000FF00) /* R/W */ +#define AFC_CFG_BACK_DUR (0x000000F0) /* R/W */ +#define AFC_CFG_FCMULT (0x00000008) /* R/W */ +#define AFC_CFG_FCBRD (0x00000004) /* R/W */ +#define AFC_CFG_FCADD (0x00000002) /* R/W */ +#define AFC_CFG_FCANY (0x00000001) /* R/W */ + +#define E2P_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0) +#define E2P_CMD_EPC_BUSY (0x80000000) + /* Self Clearing */ +#define E2P_CMD_EPC_CMD (0x70000000) /* R/W */ +#define E2P_CMD_EPC_CMD_READ (0x00000000) /* R/W */ +#define E2P_CMD_EPC_CMD_EWDS (0x10000000) /* R/W */ +#define E2P_CMD_EPC_CMD_EWEN (0x20000000) /* R/W */ +#define E2P_CMD_EPC_CMD_WRITE (0x30000000) /* R/W */ +#define E2P_CMD_EPC_CMD_WRAL (0x40000000) /* R/W */ +#define E2P_CMD_EPC_CMD_ERASE (0x50000000) /* R/W */ +#define E2P_CMD_EPC_CMD_ERAL (0x60000000) /* R/W */ +#define E2P_CMD_EPC_CMD_RELOAD (0x70000000) /* R/W */ +#define E2P_CMD_EPC_TIMEOUT (0x00000200) /* RO */ +#define E2P_CMD_MAC_ADDR_LOADED (0x00000100) /* RO */ +#define E2P_CMD_EPC_ADDR (0x000000FF) /* R/W */ + +#define E2P_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4) +#define E2P_DATA_EEPROM_DATA (0x000000FF) /* R/W */ +/* end of LAN register offsets and bit definitions */ + +/* MAC Control and Status registers */ +#define MAC_CR (0x01) /* R/W */ + +/* MAC_CR - MAC Control Register */ +#define MAC_CR_RXALL (0x80000000) +/* TODO: delete this bit? It is not described in the data sheet. */ +#define MAC_CR_HBDIS (0x10000000) +#define MAC_CR_RCVOWN (0x00800000) +#define MAC_CR_LOOPBK (0x00200000) +#define MAC_CR_FDPX (0x00100000) +#define MAC_CR_MCPAS (0x00080000) +#define MAC_CR_PRMS (0x00040000) +#define MAC_CR_INVFILT (0x00020000) +#define MAC_CR_PASSBAD (0x00010000) +#define MAC_CR_HFILT (0x00008000) +#define MAC_CR_HPFILT (0x00002000) +#define MAC_CR_LCOLL (0x00001000) +#define MAC_CR_BCAST (0x00000800) +#define MAC_CR_DISRTY (0x00000400) +#define MAC_CR_PADSTR (0x00000100) +#define MAC_CR_BOLMT_MASK (0x000000C0) +#define MAC_CR_DFCHK (0x00000020) +#define MAC_CR_TXEN (0x00000008) +#define MAC_CR_RXEN (0x00000004) + +#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */ +#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */ +#define HASHH (0x04) /* R/W */ +#define HASHL (0x05) /* R/W */ + +#define MII_ACC (0x06) /* R/W */ +#define MII_ACC_PHY_ADDR (0x0000F800) +#define MII_ACC_MIIRINDA (0x000007C0) +#define MII_ACC_MII_WRITE (0x00000002) +#define MII_ACC_MII_BUSY (0x00000001) + +#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */ + +#define FLOW (0x08) /* R/W */ +#define FLOW_FCPT (0xFFFF0000) +#define FLOW_FCPASS (0x00000004) +#define FLOW_FCEN (0x00000002) +#define FLOW_FCBSY (0x00000001) + +#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */ +#define VLAN1_VTI1 (0x0000ffff) + +#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */ +#define VLAN2_VTI2 (0x0000ffff) + +#define WUFF (0x0B) /* WO */ + +#define WUCSR (0x0C) /* R/W */ +#define WUCSR_GUE (0x00000200) +#define WUCSR_WUFR (0x00000040) +#define WUCSR_MPR (0x00000020) +#define WUCSR_WAKE_EN (0x00000004) +#define WUCSR_MPEN (0x00000002) + +/* Chip ID values */ +#define CHIP_9115 0x115 +#define CHIP_9116 0x116 +#define CHIP_9117 0x117 +#define CHIP_9118 0x118 +#define CHIP_9215 0x115a +#define CHIP_9216 0x116a +#define CHIP_9217 0x117a +#define CHIP_9218 0x118a + +struct chip_id { + u16 id; + char *name; +}; + +static const struct chip_id chip_ids[] = { + { CHIP_9115, "LAN9115" }, + { CHIP_9116, "LAN9116" }, + { CHIP_9117, "LAN9117" }, + { CHIP_9118, "LAN9118" }, + { CHIP_9215, "LAN9215" }, + { CHIP_9216, "LAN9216" }, + { CHIP_9217, "LAN9217" }, + { CHIP_9218, "LAN9218" }, + { 0, NULL }, +}; + +#define DRIVERNAME "smc911x" + +u32 smc911x_get_mac_csr(u8 reg) +{ + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg; + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + + return MAC_CSR_DATA; +} + +void smc911x_set_mac_csr(u8 reg, u32 data) +{ + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + MAC_CSR_DATA = data; + MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg; + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); } + +static int smx911x_handle_mac_address(bd_t *bd) +{ + unsigned long addrh, addrl; + unsigned char *m = bd->bi_enetaddr; + + /* if the environment has a valid mac address then use it */ + if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) { + addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24; + addrh = m[4] | m[5] << 8; + smc911x_set_mac_csr(ADDRH, addrh); + smc911x_set_mac_csr(ADDRL, addrl); + } else { + /* if not, try to get one from the eeprom */ + addrh = smc911x_get_mac_csr(ADDRH); + addrl = smc911x_get_mac_csr(ADDRL); + + m[0] = (addrl) & 0xff; + m[1] = (addrl >> 8) & 0xff; + m[2] = (addrl >> 16) & 0xff; + m[3] = (addrl >> 24) & 0xff; + m[4] = (addrh) & 0xff; + m[5] = (addrh >> 8) & 0xff; + + /* we get 0xff when there is no eeprom connected */ + if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) { + printf(DRIVERNAME ": no valid mac address " + "in environment " + "and no eeprom found\n"); + return -1; + } + } + + printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + m[0], m[1], m[2], m[3], m[4], m[5]); + + return 0; +} + +static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val) +{ + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY); + + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + *val = smc911x_get_mac_csr(MII_DATA); + + return 0; +} + +static int smc911x_miiphy_write(u8 phy, u8 reg, u16 val) +{ + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + smc911x_set_mac_csr(MII_DATA, val); + smc911x_set_mac_csr(MII_ACC, + phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE); + + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + return 0; +} + +static int smc911x_phy_reset(void) +{ + u32 reg; + + reg = PMT_CTRL; + reg &= ~0xfffff030; + reg |= PMT_CTRL_PHY_RST; + PMT_CTRL = reg; + + mdelay(100); + + return 0; +} + +static void smc911x_phy_configure(void) +{ + int timeout; + u16 status; + + smc911x_phy_reset(); + + smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET); + mdelay(1); + smc911x_miiphy_write(1, PHY_ANAR, 0x01e1); + smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); + + timeout = 5000; + do { + mdelay(1); + if ((timeout--) == 0) + goto err_out; + + if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0) + goto err_out; + } while (!(status & PHY_BMSR_LS)); + + printf(DRIVERNAME ": phy initialized\n"); + + return; + +err_out: + printf(DRIVERNAME ": autonegotiation timed out\n"); } + +static void smc911x_reset(void) +{ + int timeout; + + /* Take out of PM setting first */ + if (PMT_CTRL & PMT_CTRL_READY) { + /* Write to the bytetest will take out of powerdown */ + BYTE_TEST = 0x0; + + timeout = 10; + + while (timeout-- && !(PMT_CTRL & PMT_CTRL_READY)) + udelay(10); + if (!timeout) { + printf(DRIVERNAME + ": timeout waiting for PM restore\n"); + return; + } + } + + /* Disable interrupts */ + INT_EN = 0; + + HW_CFG = HW_CFG_SRST; + + timeout = 1000; + while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY) + udelay(10); + + if (!timeout) { + printf(DRIVERNAME ": reset timeout\n"); + return; + } + + /* Reset the FIFO level and flow control settings */ + smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN); + AFC_CFG = 0x0050287F; + + /* Set to LED outputs */ + GPIO_CFG = 0x70070000; +} + +static void smc911x_enable(void) +{ + /* Enable TX */ + HW_CFG = 8 << 16 | HW_CFG_SF; + + GPT_CFG = GPT_CFG_TIMER_EN | 10000; + + TX_CFG = TX_CFG_TX_ON; + + /* no padding to start of packets */ + RX_CFG = 0; + + smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS); + +} + +int eth_init(bd_t *bd) +{ + unsigned long val, i; + + printf(DRIVERNAME ": initializing\n"); + + val = BYTE_TEST; + if (val != 0x87654321) { + printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val); + goto err_out; + } + + val = ID_REV >> 16; + for (i = 0; chip_ids[i].id != 0; i++) { + if (chip_ids[i].id == val) + break; + } + if (!chip_ids[i].id) { + printf(DRIVERNAME ": Unknown chip ID %04x\n", val); + goto err_out; + } + + printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name); + + smc911x_reset(); + + /* Configure the PHY, initialize the link state */ + smc911x_phy_configure(); + + if (smx911x_handle_mac_address(bd)) + goto err_out; + + /* Turn on Tx + Rx */ + smc911x_enable(); + + return 0; + +err_out: + return -1; +} + +int eth_send(volatile void *packet, int length) +{ + u32 *data = (u32 *)packet; + u32 tmplen; + u32 status; + + TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length; + TX_DATA_FIFO = length; + + tmplen = (length + 3) / 4; + + while (tmplen--) + TX_DATA_FIFO = *data++; + + /* wait for transmission */ + while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16)); + + /* get status. Ignore 'no carrier' error, it has no meaning for + * full duplex operation + */ + status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL | + TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN); + + if (!status) + return 0; + + printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n", + status & TX_STS_LOC ? "TX_STS_LOC " : "", + status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "", + status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "", + status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "", + status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : ""); + + return -1; +} + +void eth_halt(void) +{ + smc911x_reset(); +} + +int eth_rx(void) +{ + u32 *data = (u32 *)NetRxPackets[0]; + u32 pktlen, tmplen; + u32 status; + + if ((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) { + status = RX_STATUS_FIFO; + pktlen = (status & RX_STS_PKT_LEN) >> 16; + + RX_CFG = 0; + + tmplen = (pktlen + 2 + 3) / 4; + while (tmplen--) + *data++ = RX_DATA_FIFO; + + if (status & RX_STS_ES) + printf(DRIVERNAME + ": dropped bad packet. Status: 0x%08x\n", + status); + else + NetReceive(NetRxPackets[0], pktlen); + } + + return 0; +} + +#endif /* CONFIG_DRIVER_SMC911X */ diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 431a8d2..9d22aa3 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -1267,6 +1267,35 @@ struct phy_info phy_info_VSC8244 = { }, }; +struct phy_info phy_info_VSC8601 = { + 0x00007042, + "Vitesse VSC8601", + 4, + (struct phy_cmd[]){ /* config */ + /* Override PHY config settings */ + /* Configure some basic stuff */ + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, +#ifdef CFG_VSC8601_SKEWFIX + {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL}, +#endif + {miim_end,} + }, + (struct phy_cmd[]){ /* startup */ + /* Read the Status (2x to make sure link is right) */ + {MIIM_STATUS, miim_read, NULL}, + /* Auto-negotiate */ + {MIIM_STATUS, miim_read, &mii_parse_sr}, + /* Read the status */ + {MIIM_VSC8244_AUX_CONSTAT, miim_read, + &mii_parse_vsc8244}, + {miim_end,} + }, + (struct phy_cmd[]){ /* shutdown */ + {miim_end,} + }, +}; + + struct phy_info phy_info_dm9161 = { 0x0181b88, "Davicom DM9161E", @@ -1462,6 +1491,7 @@ struct phy_info *phy_info[] = { &phy_info_dm9161, &phy_info_lxt971, &phy_info_VSC8244, + &phy_info_VSC8601, &phy_info_dp83865, &phy_info_rtl8211b, &phy_info_generic, diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h index d4dc15a..cfa7d1a 100644 --- a/drivers/net/tsec.h +++ b/drivers/net/tsec.h @@ -159,6 +159,11 @@ #define MIIM_VSC8244_LED_CON 0x1b #define MIIM_VSC8244_LEDCON_INIT 0xF011 +/* Entry for Vitesse VSC8601 regs starts here (Not complete) */ +/* Vitesse VSC8601 Extended PHY Control Register 1 */ +#define MIIM_VSC8601_EPHY_CON 0x17 +#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 + /* 88E1011 PHY Status Register */ #define MIIM_88E1011_PHY_STATUS 0x11 #define MIIM_88E1011_PHYSTAT_SPEED 0xc000 diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index fe45839..ad1b7dd 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -31,6 +31,9 @@ COBJS-y += pci_auto.o COBJS-y += pci_indirect.o COBJS-y += tsi108_pci.o COBJS-y += w83c553f.o +COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o +COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o +COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/pci/pci_sh4.c b/drivers/pci/pci_sh4.c new file mode 100644 index 0000000..1290c0a --- /dev/null +++ b/drivers/pci/pci_sh4.c @@ -0,0 +1,76 @@ +/* + * SH4 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/cpu/sh4/pci-sh4.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <pci.h> + +int pci_sh4_init(struct pci_controller *hose) +{ + hose->first_busno = 0; + hose->region_count = 0; + hose->last_busno = 0xff; + + /* PCI memory space */ + pci_set_region(hose->regions + 0, + CONFIG_PCI_MEM_BUS, + CONFIG_PCI_MEM_PHYS, + CONFIG_PCI_MEM_SIZE, + PCI_REGION_MEM); + hose->region_count++; + + /* PCI IO space */ + pci_set_region(hose->regions + 1, + CONFIG_PCI_IO_BUS, + CONFIG_PCI_IO_PHYS, + CONFIG_PCI_IO_SIZE, + PCI_REGION_IO); + hose->region_count++; + + udelay(1000); + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + pci_sh4_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + pci_sh4_write_config_dword); + + pci_register_hose(hose); + + udelay(1000); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + hose->last_busno = pci_hose_scan(hose); + return 0; +} diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c new file mode 100644 index 0000000..a058e1d --- /dev/null +++ b/drivers/pci/pci_sh7751.c @@ -0,0 +1,199 @@ +/* + * SH7751 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +/* Register addresses and such */ +#define SH7751_BCR1 (vu_long *)0xFF800000 +#define SH7751_BCR2 (vu_short*)0xFF800004 +#define SH7751_WCR1 (vu_long *)0xFF800008 +#define SH7751_WCR2 (vu_long *)0xFF80000C +#define SH7751_WCR3 (vu_long *)0xFF800010 +#define SH7751_MCR (vu_long *)0xFF800014 +#define SH7751_BCR3 (vu_short*)0xFF800050 +#define SH7751_PCICONF0 (vu_long *)0xFE200000 +#define SH7751_PCICONF1 (vu_long *)0xFE200004 +#define SH7751_PCICONF2 (vu_long *)0xFE200008 +#define SH7751_PCICONF3 (vu_long *)0xFE20000C +#define SH7751_PCICONF4 (vu_long *)0xFE200010 +#define SH7751_PCICONF5 (vu_long *)0xFE200014 +#define SH7751_PCICONF6 (vu_long *)0xFE200018 +#define SH7751_PCICR (vu_long *)0xFE200100 +#define SH7751_PCILSR0 (vu_long *)0xFE200104 +#define SH7751_PCILSR1 (vu_long *)0xFE200108 +#define SH7751_PCILAR0 (vu_long *)0xFE20010C +#define SH7751_PCILAR1 (vu_long *)0xFE200110 +#define SH7751_PCIMBR (vu_long *)0xFE2001C4 +#define SH7751_PCIIOBR (vu_long *)0xFE2001C8 +#define SH7751_PCIPINT (vu_long *)0xFE2001CC +#define SH7751_PCIPINTM (vu_long *)0xFE2001D0 +#define SH7751_PCICLKR (vu_long *)0xFE2001D4 +#define SH7751_PCIBCR1 (vu_long *)0xFE2001E0 +#define SH7751_PCIBCR2 (vu_long *)0xFE2001E4 +#define SH7751_PCIWCR1 (vu_long *)0xFE2001E8 +#define SH7751_PCIWCR2 (vu_long *)0xFE2001EC +#define SH7751_PCIWCR3 (vu_long *)0xFE2001F0 +#define SH7751_PCIMCR (vu_long *)0xFE2001F4 +#define SH7751_PCIBCR3 (vu_long *)0xFE2001F8 + +#define BCR1_BREQEN 0x00080000 +#define PCI_SH7751_ID 0x35051054 +#define PCI_SH7751R_ID 0x350E1054 +#define SH7751_PCICONF1_WCC 0x00000080 +#define SH7751_PCICONF1_PER 0x00000040 +#define SH7751_PCICONF1_BUM 0x00000004 +#define SH7751_PCICONF1_MES 0x00000002 +#define SH7751_PCICONF1_CMDS 0x000000C6 +#define SH7751_PCI_HOST_BRIDGE 0x6 +#define SH7751_PCICR_PREFIX 0xa5000000 +#define SH7751_PCICR_PRST 0x00000002 +#define SH7751_PCICR_CFIN 0x00000001 +#define SH7751_PCIPINT_D3 0x00000002 +#define SH7751_PCIPINT_D0 0x00000001 +#define SH7751_PCICLKR_PREFIX 0xa5000000 + +#define SH7751_PCI_MEM_BASE 0xFD000000 +#define SH7751_PCI_MEM_SIZE 0x01000000 +#define SH7751_PCI_IO_BASE 0xFE240000 +#define SH7751_PCI_IO_SIZE 0x00040000 + +#define SH7751_CS3_BASE_ADDR 0x0C000000 +#define SH7751_P2CS3_BASE_ADDR 0xAC000000 + +#define SH7751_PCIPAR (vu_long *)0xFE2001C0 +#define SH7751_PCIPDR (vu_long *)0xFE200220 + +#define p4_in(addr) *(addr) +#define p4_out(data,addr) *(addr) = (data) + +/* Double word */ +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + *value = p4_in(SH7751_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + p4_out(value, SH7751_PCIPDR); + + return 0; +} + +int pci_sh7751_init(struct pci_controller *hose) +{ + /* Double-check that we're a 7751 or 7751R chip */ + if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID + && p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) { + printf("PCI: Unknown PCI host bridge.\n"); + return 1; + } + printf("PCI: SH7751 PCI host bridge found.\n"); + + /* Double-check some BSC config settings */ + /* (Area 3 non-MPX 32-bit, PCI bus pins) */ + if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) { + printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1)); + return 2; + } + if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 3; + } + if (p4_in(SH7751_BCR2) & 0x01) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 4; + } + + /* Force BREQEN in BCR1 to allow PCIC access */ + p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1); + + /* Toggle PCI reset pin */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR); + udelay(32); + p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR); + + /* Set cmd bits: WCC, PER, BUM, MES */ + /* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */ + p4_out(0xfb900047, SH7751_PCICONF1); /* K.Kino */ + + /* Define this host as the host bridge */ + p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2); + + /* Force PCI clock(s) on */ + p4_out(0, SH7751_PCICLKR); + p4_out(0x03, SH7751_PCICLKR); + + /* Clear powerdown IRQs, also mask them (unused) */ + p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT); + p4_out(0, SH7751_PCIPINTM); + + p4_out(0xab000001, SH7751_PCICONF4); + + /* Set up target memory mappings (for external DMA access) */ + /* Map both P0 and P2 range to Area 3 RAM for ease of use */ + p4_out((64 - 1) << 20, SH7751_PCILSR0); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCILAR0); + p4_out(0, SH7751_PCILSR1); + p4_out(0, SH7751_PCILAR1); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCICONF5); + p4_out(0xd0000000, SH7751_PCICONF6); + + /* Map memory window to same address on PCI bus */ + p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR); + + /* Map IO window to same address on PCI bus */ + p4_out(0x2000 & 0xfffc0000, SH7751_PCIIOBR); + + /* set BREQEN */ + p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1); + + /* Copy BSC registers into PCI BSC */ + p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1); + p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2); + p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3); + p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1); + p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2); + p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3); + p4_out(inl(SH7751_MCR), SH7751_PCIMCR); + + /* Finally, set central function init complete */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR); + + pci_sh4_init(hose); + + return 0; +} diff --git a/drivers/pci/pci_sh7780.c b/drivers/pci/pci_sh7780.c new file mode 100644 index 0000000..d63d67d --- /dev/null +++ b/drivers/pci/pci_sh7780.c @@ -0,0 +1,107 @@ +/* + * SH7780 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +#define SH7780_VENDOR_ID 0x1912 +#define SH7780_DEVICE_ID 0x0002 +#define SH7780_PCICR_PREFIX 0xA5000000 +#define SH7780_PCICR_PFCS 0x00000800 +#define SH7780_PCICR_FTO 0x00000400 +#define SH7780_PCICR_PFE 0x00000200 +#define SH7780_PCICR_TBS 0x00000100 +#define SH7780_PCICR_ARBM 0x00000040 +#define SH7780_PCICR_IOCS 0x00000004 +#define SH7780_PCICR_PRST 0x00000002 +#define SH7780_PCICR_CFIN 0x00000001 + +#define p4_in(addr) *((vu_long *)addr) +#define p4_out(data,addr) *(vu_long *)(addr) = (data) +#define p4_inw(addr) *((vu_short *)addr) +#define p4_outw(data,addr) *(vu_short *)(addr) = (data) + +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 *value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); + *value = p4_in(SH7780_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); + p4_out(value, SH7780_PCIPDR); + return 0; +} + +int pci_sh7780_init(struct pci_controller *hose) +{ + p4_out(0x01, SH7780_PCIECR); + + if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID + && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID){ + printf("PCI: Unknown PCI host bridge.\n"); + return; + } + printf("PCI: SH7780 PCI host bridge found.\n"); + + /* Toggle PCI reset pin */ + p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR); + udelay(100000); + p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR); + p4_outw(0x0047, SH7780_PCICMD); + + p4_out(0x07F00001, SH7780_PCILSR0); + p4_out(0x08000000, SH7780_PCILAR0); + p4_out(0x00000000, SH7780_PCILSR1); + p4_out(0, SH7780_PCILAR1); + p4_out(0x08000000, SH7780_PCIMBAR0); + p4_out(0x00000000, SH7780_PCIMBAR1); + + p4_out(0xFD000000, SH7780_PCIMBR0); + p4_out(0x00FC0000, SH7780_PCIMBMR0); + + /* if use Operand Cache then enable PCICSCR Soonp bits. */ + p4_out(0x08000000, SH7780_PCICSAR0); + p4_out(0x0000001B, SH7780_PCICSCR0); /* Snoop bit :On */ + + p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM + | SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE), + SH7780_PCICR); + + pci_sh4_init(hose); + return 0; +} diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 70fd23f..522f96d 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -37,39 +37,46 @@ #define SCFCR (vu_short *)(SCIF_BASE + 0x18) #define SCFDR (vu_short *)(SCIF_BASE + 0x1C) #ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ -#define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ -#define SCFTDR (vu_char *)(SCIF_BASE + 0x20) -#define SCFRDR (vu_char *)(SCIF_BASE + 0x24) +# define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ +# define SCFTDR (vu_char *)(SCIF_BASE + 0x20) +# define SCFRDR (vu_char *)(SCIF_BASE + 0x24) #else -#define SCFTDR (vu_char *)(SCIF_BASE + 0xC) -#define SCFSR (vu_short *)(SCIF_BASE + 0x10) -#define SCFRDR (vu_char *)(SCIF_BASE + 0x14) +# define SCFTDR (vu_char *)(SCIF_BASE + 0xC) +# define SCFSR (vu_short *)(SCIF_BASE + 0x10) +# define SCFRDR (vu_char *)(SCIF_BASE + 0x14) #endif -#if defined(CONFIG_SH4A) -#define SCRFDR (vu_short *)(SCIF_BASE + 0x20) -#define SCSPTR (vu_short *)(SCIF_BASE + 0x24) -#define SCLSR (vu_short *)(SCIF_BASE + 0x28) -#define SCRER (vu_short *)(SCIF_BASE + 0x2C) -#define LSR_ORER 1 -#elif defined (CONFIG_SH4) -#define SCSPTR (vu_short *)(SCIF_BASE + 0x20) -#define SCLSR (vu_short *)(SCIF_BASE + 0x24) -#define LSR_ORER 1 -#elif defined (CONFIG_SH3) -#ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ -#define SCLSR (vu_short *)(SCIF_BASE + 0x24) -#define LSR_ORER 0x0200 -#else -#define SCLSR SCFSR /* SCSSR */ -#define LSR_ORER 1 -#endif +#if defined(CONFIG_CPU_SH7780) || \ + defined(CONFIG_CPU_SH7785) +# define SCRFDR (vu_short *)(SCIF_BASE + 0x20) +# define SCSPTR (vu_short *)(SCIF_BASE + 0x24) +# define SCLSR (vu_short *)(SCIF_BASE + 0x28) +# define SCRER (vu_short *)(SCIF_BASE + 0x2C) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0xFF +#elif defined(CONFIG_CPU_SH7750) || \ + defined(CONFIG_CPU_SH7751) || \ + defined(CONFIG_CPU_SH7722) +# define SCSPTR (vu_short *)(SCIF_BASE + 0x20) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F +#elif defined(CONFIG_CPU_SH7720) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 0x0200 +# define FIFOLEVEL_MASK 0x1F +#elif defined(CONFIG_CPU_SH7710) + defined(CONFIG_CPU_SH7712) +# define SCLSR SCFSR /* SCSSR */ +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F #endif +/* SCBRR register value setting */ #if defined(CONFIG_CPU_SH7720) -#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #else /* Generic SuperH */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif #define SCR_RE (1 << 4) @@ -105,14 +112,13 @@ int serial_init (void) return 0; } -static int serial_tx_fifo_level (void) -{ - return (*SCFDR >> 8) & 0x1F; -} - static int serial_rx_fifo_level (void) { - return (*SCFDR >> 0) & 0x1F; +#if defined(CONFIG_SH4A) + return (*SCRFDR >> 0) & FIFOLEVEL_MASK; +#else + return (*SCFDR >> 0) & FIFOLEVEL_MASK; +#endif } void serial_raw_putc (const char c) |