diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/host/utmi-armada100.c | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/drivers/usb/host/utmi-armada100.c b/drivers/usb/host/utmi-armada100.c new file mode 100644 index 0000000..6f1bd20 --- /dev/null +++ b/drivers/usb/host/utmi-armada100.c @@ -0,0 +1,96 @@ +/* + * (C) Copyright 2012 + * eInfochips Ltd. <www.einfochips.com> + * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> + * + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <usb.h> +#include <asm/arch/cpu.h> +#include <asm/arch/armada100.h> +#include <asm/arch/utmi-armada100.h> + +static int utmi_phy_init(void) +{ + struct armd1usb_phy_reg *phy_regs = + (struct armd1usb_phy_reg *)UTMI_PHY_BASE; + int timeout; + + setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP); + udelay(1000); + setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP); + + clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK); + setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER); + + setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL); + + /* Calibrate pll */ + timeout = 10000; + while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0)) + ; + if (!timeout) + return -1; + + udelay(200); + setbits_le32(&phy_regs->utmi_pll, VCOCAL_START); + udelay(400); + clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START); + + udelay(200); + setbits_le32(&phy_regs->utmi_tx, RCAL_START); + udelay(400); + clrbits_le32(&phy_regs->utmi_tx, RCAL_START); + + timeout = 10000; + while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0)) + ; + if (!timeout) + return -1; + + return 0; +} + +/* + * Initialize USB host controller's UTMI Physical interface + */ +int utmi_init(void) +{ + struct armd1mpmu_registers *mpmu_regs = + (struct armd1mpmu_registers *)ARMD1_MPMU_BASE; + + struct armd1apmu_registers *apmu_regs = + (struct armd1apmu_registers *)ARMD1_APMU_BASE; + + /* Turn on 26Mhz ref clock for UTMI PLL */ + setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M); + + /* USB Clock reset */ + writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc); + writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc); + + /* Initialize UTMI transceiver */ + return utmi_phy_init(); +} |