diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/phy/vitesse.c | 46 | ||||
| -rw-r--r-- | drivers/pci/fsl_pci_init.c | 9 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 15 |
3 files changed, 63 insertions, 7 deletions
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 3a55d27..c58fe50 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -58,6 +58,14 @@ #define MIIM_VSC8514_18G_QSGMII 0x80e0 #define MIIM_VSC8514_18G_CMDSTAT 0x8000 +/* Vitesse VSC8664 Control/Status Register */ +#define MIIM_VSC8664_SERDES_AND_SIGDET 0x13 +#define MIIM_VSC8664_ADDITIONAL_DEV 0x16 +#define MIIM_VSC8664_EPHY_CON 0x17 +#define MIIM_VSC8664_LED_CON 0x1E + +#define PHY_EXT_PAGE_ACCESS_EXTENDED 0x0001 + /* CIS8201 */ static int vitesse_config(struct phy_device *phydev) { @@ -244,6 +252,33 @@ static int vsc8514_config(struct phy_device *phydev) return 0; } +static int vsc8664_config(struct phy_device *phydev) +{ + u32 val; + + /* Enable MAC interface auto-negotiation */ + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON); + val |= (1 << 13); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON, val); + + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, + PHY_EXT_PAGE_ACCESS_EXTENDED); + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET); + val |= (1 << 11); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET, val); + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); + + /* Enable LED blink */ + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON); + val &= ~(1 << 2); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON, val); + + genphy_config_aneg(phydev); + + return 0; +} + static struct phy_driver VSC8211_driver = { .name = "Vitesse VSC8211", .uid = 0xfc4b0, @@ -334,6 +369,16 @@ static struct phy_driver VSC8662_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver VSC8664_driver = { + .name = "Vitesse VSC8664", + .uid = 0x70660, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vsc8664_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + /* Vitesse bought Cicada, so we'll put these here */ static struct phy_driver cis8201_driver = { .name = "CIS8201", @@ -366,6 +411,7 @@ int phy_vitesse_init(void) phy_register(&VSC8574_driver); phy_register(&VSC8514_driver); phy_register(&VSC8662_driver); + phy_register(&VSC8664_driver); phy_register(&cis8201_driver); phy_register(&cis8204_driver); diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 6317fb1..3a41b0e 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -49,8 +49,13 @@ static void set_inbound_window(volatile pit_t *pi, u64 size) { u32 sz = (__ilog2_u64(size) - 1); - u32 flag = PIWAR_EN | PIWAR_LOCAL | - PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; +#ifdef CONFIG_SYS_FSL_ERRATUM_A005434 + u32 flag = 0; +#else + u32 flag = PIWAR_LOCAL; +#endif + + flag |= PIWAR_EN | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; out_be32(&pi->pitar, r->phys_start >> 12); out_be32(&pi->piwbar, r->bus_start >> 12); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 6cb4d98..45062e6 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -104,15 +104,20 @@ int ehci_hcd_init(int index, enum usb_init_type init, if (!strncmp(phy_type, "utmi", 4)) { #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) - setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI); - setbits_be32(&ehci->control, UTMI_PHY_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + PHY_CLK_SEL_UTMI); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + UTMI_PHY_EN); udelay(1000); /* delay required for PHY Clk to appear */ #endif out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI); - setbits_be32(&ehci->control, USB_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + USB_EN); } else { - setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI); - clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + PHY_CLK_SEL_ULPI); + clrsetbits_be32(&ehci->control, UTMI_PHY_EN | + CONTROL_REGISTER_W1C_MASK, USB_EN); udelay(1000); /* delay required for PHY Clk to appear */ if (!usb_phy_clk_valid(ehci)) return -EINVAL; |