diff options
Diffstat (limited to 'drivers')
30 files changed, 1056 insertions, 350 deletions
diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile index 6f74fdc..52a2ceb 100644 --- a/drivers/bios_emulator/Makefile +++ b/drivers/bios_emulator/Makefile @@ -8,9 +8,8 @@ obj-y = atibios.o biosemu.o besys.o bios.o \ $(X86DIR)/sys.o \ $(X86DIR)/debug.o -EXTRA_CFLAGS += -I. -I./include -I$(TOPDIR)/include \ +EXTRA_CFLAGS += -I. -I./include \ -D__PPC__ -D__BIG_ENDIAN__ CFLAGS += $(EXTRA_CFLAGS) -HOSTCFLAGS += $(EXTRA_CFLAGS) CPPFLAGS += $(EXTRA_CFLAGS) diff --git a/drivers/misc/fsl_ifc.c b/drivers/misc/fsl_ifc.c index 507c4de..be61973 100644 --- a/drivers/misc/fsl_ifc.c +++ b/drivers/misc/fsl_ifc.c @@ -34,6 +34,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR0_EXT set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT); #endif +#ifdef CONFIG_SYS_CSOR0_EXT + set_ifc_csor_ext(IFC_CS0, CONFIG_SYS_CSOR0_EXT); +#endif set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0); set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0); set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0); @@ -43,6 +46,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR1_EXT set_ifc_cspr_ext(IFC_CS1, CONFIG_SYS_CSPR1_EXT); #endif +#ifdef CONFIG_SYS_CSOR1_EXT + set_ifc_csor_ext(IFC_CS1, CONFIG_SYS_CSOR1_EXT); +#endif #if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1) set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0); set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1); @@ -57,6 +63,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR2_EXT set_ifc_cspr_ext(IFC_CS2, CONFIG_SYS_CSPR2_EXT); #endif +#ifdef CONFIG_SYS_CSOR2_EXT + set_ifc_csor_ext(IFC_CS2, CONFIG_SYS_CSOR2_EXT); +#endif #if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2) set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0); set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1); @@ -71,6 +80,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR3_EXT set_ifc_cspr_ext(IFC_CS3, CONFIG_SYS_CSPR3_EXT); #endif +#ifdef CONFIG_SYS_CSOR3_EXT + set_ifc_csor_ext(IFC_CS3, CONFIG_SYS_CSOR3_EXT); +#endif #if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3) set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0); set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1); @@ -85,6 +97,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR4_EXT set_ifc_cspr_ext(IFC_CS4, CONFIG_SYS_CSPR4_EXT); #endif +#ifdef CONFIG_SYS_CSOR4_EXT + set_ifc_csor_ext(IFC_CS4, CONFIG_SYS_CSOR4_EXT); +#endif #if defined(CONFIG_SYS_CSPR4) && defined(CONFIG_SYS_CSOR4) set_ifc_ftim(IFC_CS4, IFC_FTIM0, CONFIG_SYS_CS4_FTIM0); set_ifc_ftim(IFC_CS4, IFC_FTIM1, CONFIG_SYS_CS4_FTIM1); @@ -99,6 +114,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR5_EXT set_ifc_cspr_ext(IFC_CS5, CONFIG_SYS_CSPR5_EXT); #endif +#ifdef CONFIG_SYS_CSOR5_EXT + set_ifc_csor_ext(IFC_CS5, CONFIG_SYS_CSOR5_EXT); +#endif #if defined(CONFIG_SYS_CSPR5) && defined(CONFIG_SYS_CSOR5) set_ifc_ftim(IFC_CS5, IFC_FTIM0, CONFIG_SYS_CS5_FTIM0); set_ifc_ftim(IFC_CS5, IFC_FTIM1, CONFIG_SYS_CS5_FTIM1); @@ -113,6 +131,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR6_EXT set_ifc_cspr_ext(IFC_CS6, CONFIG_SYS_CSPR6_EXT); #endif +#ifdef CONFIG_SYS_CSOR6_EXT + set_ifc_csor_ext(IFC_CS6, CONFIG_SYS_CSOR6_EXT); +#endif #if defined(CONFIG_SYS_CSPR6) && defined(CONFIG_SYS_CSOR6) set_ifc_ftim(IFC_CS6, IFC_FTIM0, CONFIG_SYS_CS6_FTIM0); set_ifc_ftim(IFC_CS6, IFC_FTIM1, CONFIG_SYS_CS6_FTIM1); @@ -127,6 +148,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR7_EXT set_ifc_cspr_ext(IFC_CS7, CONFIG_SYS_CSPR7_EXT); #endif +#ifdef CONFIG_SYS_CSOR7_EXT + set_ifc_csor_ext(IFC_CS7, CONFIG_SYS_CSOR7_EXT); +#endif #if defined(CONFIG_SYS_CSPR7) && defined(CONFIG_SYS_CSOR7) set_ifc_ftim(IFC_CS7, IFC_FTIM0, CONFIG_SYS_CS7_FTIM0); set_ifc_ftim(IFC_CS7, IFC_FTIM1, CONFIG_SYS_CS7_FTIM1); diff --git a/drivers/misc/gpio_led.c b/drivers/misc/gpio_led.c index 3fedddc..3e95727 100644 --- a/drivers/misc/gpio_led.c +++ b/drivers/misc/gpio_led.c @@ -9,15 +9,42 @@ #include <status_led.h> #include <asm/gpio.h> +#ifndef CONFIG_GPIO_LED_INVERTED_TABLE +#define CONFIG_GPIO_LED_INVERTED_TABLE {} +#endif + +static led_id_t gpio_led_inv[] = CONFIG_GPIO_LED_INVERTED_TABLE; + +static int gpio_led_gpio_value(led_id_t mask, int state) +{ + int i, gpio_value = (state == STATUS_LED_ON); + + for (i = 0; i < ARRAY_SIZE(gpio_led_inv); i++) { + if (gpio_led_inv[i] == mask) + gpio_value = !gpio_value; + } + + return gpio_value; +} + void __led_init(led_id_t mask, int state) { - gpio_request(mask, "gpio_led"); - gpio_direction_output(mask, state == STATUS_LED_ON); + int gpio_value; + + if (gpio_request(mask, "gpio_led") != 0) { + printf("%s: failed requesting GPIO%lu!\n", __func__, mask); + return; + } + + gpio_value = gpio_led_gpio_value(mask, state); + gpio_direction_output(mask, gpio_value); } void __led_set(led_id_t mask, int state) { - gpio_set_value(mask, state == STATUS_LED_ON); + int gpio_value = gpio_led_gpio_value(mask, state); + + gpio_set_value(mask, gpio_value); } void __led_toggle(led_id_t mask) diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index eb1eafa..e145cd1 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o obj-$(CONFIG_NAND_SPEAR) += spr_nand.o obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o +obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o obj-$(CONFIG_NAND_PLAT) += nand_plat.o obj-$(CONFIG_NAND_DOCG4) += docg4.o diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index da83f06..16b7df0 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -412,7 +412,7 @@ static int pmecc_err_location(struct mtd_info *mtd) } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n"); + dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n"); return -1; } @@ -452,7 +452,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, *(buf + byte_pos) ^= (1 << bit_pos); pos = sector_num * host->pmecc_sector_size + byte_pos; - printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, *(buf + byte_pos)); } else { /* Bit flip in OOB area */ @@ -462,7 +462,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, ecc[tmp] ^= (1 << bit_pos); pos = tmp + nand_chip->ecc.layout->eccpos[0]; - printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, ecc[tmp]); } @@ -500,7 +500,7 @@ normal_check: err_nbr = pmecc_err_location(mtd); if (err_nbr == -1) { - printk(KERN_ERR "PMECC: Too many errors\n"); + dev_err(host->dev, "PMECC: Too many errors\n"); mtd->ecc_stats.failed++; return -EIO; } else { @@ -544,7 +544,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n"); + dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n"); return -1; } @@ -584,7 +584,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n"); + dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n"); goto out; } @@ -827,6 +827,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, switch (mtd->writesize) { case 2048: case 4096: + case 8192: host->pmecc_degree = (sector_size == 512) ? PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14; host->pmecc_cw_len = (1 << host->pmecc_degree) - 1; @@ -840,8 +841,15 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, nand->ecc.steps = 1; nand->ecc.bytes = host->pmecc_bytes_per_sector * host->pmecc_sector_number; + + if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) { + dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n", + MTD_MAX_ECCPOS_ENTRIES_LARGE); + return -EINVAL; + } + if (nand->ecc.bytes > mtd->oobsize - 2) { - printk(KERN_ERR "No room for ECC bytes\n"); + dev_err(host->dev, "No room for ECC bytes\n"); return -EINVAL; } pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, @@ -852,7 +860,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, case 512: case 1024: /* TODO */ - printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n"); + dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n"); default: /* page size not handled by HW ECC */ /* switching back to soft ECC */ @@ -1035,7 +1043,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* it doesn't seems to be a freshly * erased block. * We can't correct so many errors */ - printk(KERN_WARNING "atmel_nand : multiple errors detected." + dev_warn(host->dev, "atmel_nand : multiple errors detected." " Unable to correct.\n"); return -EIO; } @@ -1045,12 +1053,12 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* there's nothing much to do here. * the bit error is on the ECC itself. */ - printk(KERN_WARNING "atmel_nand : one bit error on ECC code." + dev_warn(host->dev, "atmel_nand : one bit error on ECC code." " Nothing to correct\n"); return 0; } - printk(KERN_WARNING "atmel_nand : one bit error on data." + dev_warn(host->dev, "atmel_nand : one bit error on data." " (word offset in the page :" " 0x%x bit offset : 0x%x)\n", ecc_word, ecc_bit); @@ -1062,7 +1070,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* 8 bits words */ dat[ecc_word] ^= (1 << ecc_bit); } - printk(KERN_WARNING "atmel_nand : error corrected\n"); + dev_warn(host->dev, "atmel_nand : error corrected\n"); return 1; } @@ -1178,7 +1186,11 @@ int atmel_nand_chip_init(int devnum, ulong base_addr) mtd->priv = nand; nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr; +#ifdef CONFIG_NAND_ECC_BCH + nand->ecc.mode = NAND_ECC_SOFT_BCH; +#else nand->ecc.mode = NAND_ECC_SOFT; +#endif #ifdef CONFIG_SYS_NAND_DBW_16 nand->options = NAND_BUSWIDTH_16; #endif @@ -1186,7 +1198,7 @@ int atmel_nand_chip_init(int devnum, ulong base_addr) #ifdef CONFIG_SYS_NAND_READY_PIN nand->dev_ready = at91_nand_ready; #endif - nand->chip_delay = 20; + nand->chip_delay = 75; ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL); if (ret) @@ -1214,6 +1226,6 @@ void board_nand_init(void) int i; for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) if (atmel_nand_chip_init(i, base_addr[i])) - printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip", + dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip", i); } diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 3b845b9..1808a7f 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -125,6 +125,69 @@ static struct nand_ecclayout oob_4096_ecc8 = { .oobfree = { {2, 6}, {136, 82} }, }; +/* 8192-byte page size with 4-bit ECC */ +static struct nand_ecclayout oob_8192_ecc4 = { + .eccbytes = 128, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, + }, + .oobfree = { {2, 6}, {136, 208} }, +}; + +/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */ +static struct nand_ecclayout oob_8192_ecc8 = { + .eccbytes = 256, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137, 138, 139, 140, 141, 142, 143, + 144, 145, 146, 147, 148, 149, 150, 151, + 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 170, 171, 172, 173, 174, 175, + 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 186, 187, 188, 189, 190, 191, + 192, 193, 194, 195, 196, 197, 198, 199, + 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212, 213, 214, 215, + 216, 217, 218, 219, 220, 221, 222, 223, + 224, 225, 226, 227, 228, 229, 230, 231, + 232, 233, 234, 235, 236, 237, 238, 239, + 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 250, 251, 252, 253, 254, 255, + 256, 257, 258, 259, 260, 261, 262, 263, + }, + .oobfree = { {2, 6}, {264, 80} }, +}; /* * Generic flash bbt descriptors @@ -428,20 +491,27 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, if (mtd->writesize > 512) { nand_fcr0 = (NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT); + (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) | + (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT); out_be32(&ifc->ifc_nand.nand_fir0, (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0); + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT)); + out_be32(&ifc->ifc_nand.nand_fir1, + (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_RDSTAT << + IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT)); } else { nand_fcr0 = ((NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT) | (NAND_CMD_SEQIN << - IFC_NAND_FCR0_CMD2_SHIFT)); + IFC_NAND_FCR0_CMD2_SHIFT) | + (NAND_CMD_STATUS << + IFC_NAND_FCR0_CMD3_SHIFT)); out_be32(&ifc->ifc_nand.nand_fir0, (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | @@ -450,7 +520,11 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT)); out_be32(&ifc->ifc_nand.nand_fir1, - (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT)); + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_RDSTAT << + IFC_NAND_FIR1_OP7_SHIFT) | + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT)); if (column >= mtd->writesize) nand_fcr0 |= @@ -902,6 +976,21 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) priv->bufnum_mask = 1; break; + case CSOR_NAND_PGS_8K: + if ((csor & CSOR_NAND_ECC_MODE_MASK) == + CSOR_NAND_ECC_MODE_4) { + layout = &oob_8192_ecc4; + nand->ecc.strength = 4; + } else { + layout = &oob_8192_ecc8; + nand->ecc.strength = 8; + nand->ecc.bytes = 16; + } + + priv->bufnum_mask = 0; + break; + + default: printf("ifc nand: bad csor %#x: bad page size\n", csor); return -ENODEV; diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index 3c8278d..9de327b 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -112,10 +112,13 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst) port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8; - if (csor & CSOR_NAND_PGS_4K) { + if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) { + page_size = 8192; + bufnum_mask = 0x0; + } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) { page_size = 4096; bufnum_mask = 0x1; - } else if (csor & CSOR_NAND_PGS_2K) { + } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) { page_size = 2048; bufnum_mask = 0x3; } else { diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c new file mode 100644 index 0000000..2aa7807 --- /dev/null +++ b/drivers/mtd/nand/omap_elm.c @@ -0,0 +1,196 @@ +/* + * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com> + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * BCH Error Location Module (ELM) support. + * + * NOTE: + * 1. Supports only continuous mode. Dont see need for page mode in uboot + * 2. Supports only syndrome polynomial 0. i.e. poly local variable is + * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial + * sets in uboot + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/cpu.h> +#include <asm/omap_gpmc.h> +#include <asm/omap_elm.h> + +#define ELM_DEFAULT_POLY (0) + +struct elm *elm_cfg; + +/** + * elm_load_syndromes - Load BCH syndromes based on nibble selection + * @syndrome: BCH syndrome + * @nibbles: + * @poly: Syndrome Polynomial set to use + * + * Load BCH syndromes based on nibble selection + */ +static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly) +{ + u32 *ptr; + u32 val; + + /* reg 0 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0]; + val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) | + (syndrome[3] << 24); + writel(val, ptr); + /* reg 1 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1]; + val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) | + (syndrome[7] << 24); + writel(val, ptr); + + /* BCH 8-bit with 26 nibbles (4*8=32) */ + if (nibbles > 13) { + /* reg 2 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2]; + val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) | + (syndrome[11] << 24); + writel(val, ptr); + /* reg 3 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3]; + val = syndrome[12] | (syndrome[13] << 8) | + (syndrome[14] << 16) | (syndrome[15] << 24); + writel(val, ptr); + } + + /* BCH 16-bit with 52 nibbles (7*8=56) */ + if (nibbles > 26) { + /* reg 4 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4]; + val = syndrome[16] | (syndrome[17] << 8) | + (syndrome[18] << 16) | (syndrome[19] << 24); + writel(val, ptr); + + /* reg 5 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5]; + val = syndrome[20] | (syndrome[21] << 8) | + (syndrome[22] << 16) | (syndrome[23] << 24); + writel(val, ptr); + + /* reg 6 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]; + val = syndrome[24] | (syndrome[25] << 8) | + (syndrome[26] << 16) | (syndrome[27] << 24); + writel(val, ptr); + } +} + +/** + * elm_check_errors - Check for BCH errors and return error locations + * @syndrome: BCH syndrome + * @nibbles: + * @error_count: Returns number of errrors in the syndrome + * @error_locations: Returns error locations (in decimal) in this array + * + * Check the provided syndrome for BCH errors and return error count + * and locations in the array passed. Returns -1 if error is not correctable, + * else returns 0 + */ +int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, + u32 *error_locations) +{ + u8 poly = ELM_DEFAULT_POLY; + s8 i; + u32 location_status; + + elm_load_syndromes(syndrome, nibbles, poly); + + /* start processing */ + writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]) + | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID), + &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]); + + /* wait for processing to complete */ + while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1) + ; + /* clear status */ + writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)), + &elm_cfg->irqstatus); + + /* check if correctable */ + location_status = readl(&elm_cfg->error_location[poly].location_status); + if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) + return -1; + + /* get error count */ + *error_count = readl(&elm_cfg->error_location[poly].location_status) & + ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK; + + for (i = 0; i < *error_count; i++) { + error_locations[i] = + readl(&elm_cfg->error_location[poly].error_location_x[i]); + } + + return 0; +} + + +/** + * elm_config - Configure ELM module + * @level: 4 / 8 / 16 bit BCH + * + * Configure ELM module based on BCH level. + * Set mode as continuous mode. + * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used. + * Also, the mode is set only for syndrome 0 + */ +int elm_config(enum bch_level level) +{ + u32 val; + u8 poly = ELM_DEFAULT_POLY; + u32 buffer_size = 0x7FF; + + /* config size and level */ + val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK; + val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) & + ELM_LOCATION_CONFIG_ECC_SIZE_MASK); + writel(val, &elm_cfg->location_config); + + /* config continous mode */ + /* enable interrupt generation for syndrome polynomial set */ + writel((readl(&elm_cfg->irqenable) | (0x1 << poly)), + &elm_cfg->irqenable); + /* set continuous mode for the syndrome polynomial set */ + writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)), + &elm_cfg->page_ctrl); + + return 0; +} + +/** + * elm_reset - Do a soft reset of ELM + * + * Perform a soft reset of ELM and return after reset is done. + */ +void elm_reset(void) +{ + /* initiate reset */ + writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET), + &elm_cfg->sysconfig); + + /* wait for reset complete and normal operation */ + while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) != + ELM_SYSSTATUS_RESETDONE) + ; +} + +/** + * elm_init - Initialize ELM module + * + * Initialize ELM support. Currently it does only base address init + * and ELM reset. + */ +void elm_init(void) +{ + elm_cfg = (struct elm *)ELM_BASE; + elm_reset(); +} diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index ec1787f..5e7e6b3 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -15,15 +15,13 @@ #include <linux/bch.h> #include <linux/compiler.h> #include <nand.h> -#ifdef CONFIG_AM33XX -#include <asm/arch/elm.h> -#endif +#include <asm/omap_elm.h> + +#define BADBLOCK_MARKER_LENGTH 2 +#define SECTOR_BYTES 512 static uint8_t cs; -static __maybe_unused struct nand_ecclayout hw_nand_oob = - GPMC_NAND_HW_ECC_LAYOUT; -static __maybe_unused struct nand_ecclayout hw_bch8_nand_oob = - GPMC_NAND_HW_BCH8_ECC_LAYOUT; +static __maybe_unused struct nand_ecclayout omap_ecclayout; /* * omap_nand_hwcontrol - Set the address pointers corretly for the @@ -233,6 +231,7 @@ struct nand_bch_priv { uint8_t type; uint8_t nibbles; struct bch_control *control; + enum omap_ecc ecc_scheme; }; /* bch types */ @@ -274,17 +273,15 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) { uint32_t val; uint32_t dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1; -#ifdef CONFIG_AM33XX uint32_t unused_length = 0; -#endif uint32_t wr_mode = BCH_WRAPMODE_6; struct nand_bch_priv *bch = chip->priv; /* Clear the ecc result registers, select ecc reg as 1 */ writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control); -#ifdef CONFIG_AM33XX - wr_mode = BCH_WRAPMODE_1; + if (bch->ecc_scheme == OMAP_ECC_BCH8_CODE_HW) { + wr_mode = BCH_WRAPMODE_1; switch (bch->nibbles) { case ECC_BCH4_NIBBLES: @@ -320,7 +317,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) val |= (unused_length << 22); break; } -#else + } else { /* * This ecc_size_config setting is for BCH sw library. * @@ -333,7 +330,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) */ val = (32 << 22) | (0 << 12); -#endif + } /* ecc size configuration */ writel(val, &gpmc_cfg->ecc_size_config); @@ -376,9 +373,9 @@ static void __maybe_unused omap_ecc_disable(struct mtd_info *mtd) } /* - * BCH8 support (needs ELM and thus AM33xx-only) + * BCH support using ELM module */ -#ifdef CONFIG_AM33XX +#ifdef CONFIG_NAND_OMAP_ELM /* * omap_read_bch8_result - Read BCH result for BCH8 level * @@ -631,20 +628,20 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, } return 0; } -#endif /* CONFIG_AM33XX */ +#endif /* CONFIG_NAND_OMAP_ELM */ /* * OMAP3 BCH8 support (with BCH library) */ -#ifdef CONFIG_NAND_OMAP_BCH8 +#ifdef CONFIG_BCH /* - * omap_calculate_ecc_bch - Read BCH ECC result + * omap_calculate_ecc_bch_sw - Read BCH ECC result * * @mtd: MTD device structure * @dat: The pointer to data on which ecc is computed (unused here) * @ecc: The ECC output buffer */ -static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat, +static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc) { int ret = 0; @@ -689,13 +686,13 @@ static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat, } /** - * omap_correct_data_bch - Decode received data and correct errors + * omap_correct_data_bch_sw - Decode received data and correct errors * @mtd: MTD device structure * @data: page data * @read_ecc: ecc read from nand flash * @calc_ecc: ecc read from HW ECC registers */ -static int omap_correct_data_bch(struct mtd_info *mtd, u_char *data, +static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data, u_char *read_ecc, u_char *calc_ecc) { int i, count; @@ -752,7 +749,150 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd) chip_priv->control = NULL; } } -#endif /* CONFIG_NAND_OMAP_BCH8 */ +#endif /* CONFIG_BCH */ + +/** + * omap_select_ecc_scheme - configures driver for particular ecc-scheme + * @nand: NAND chip device structure + * @ecc_scheme: ecc scheme to configure + * @pagesize: number of main-area bytes per page of NAND device + * @oobsize: number of OOB/spare bytes per page of NAND device + */ +static int omap_select_ecc_scheme(struct nand_chip *nand, + enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) { + struct nand_bch_priv *bch = nand->priv; + struct nand_ecclayout *ecclayout = nand->ecc.layout; + int eccsteps = pagesize / SECTOR_BYTES; + int i; + + switch (ecc_scheme) { + case OMAP_ECC_HAM1_CODE_SW: + debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n"); + /* For this ecc-scheme, ecc.bytes, ecc.layout, ... are + * initialized in nand_scan_tail(), so just set ecc.mode */ + bch_priv.control = NULL; + bch_priv.type = 0; + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.layout = NULL; + nand->ecc.size = pagesize; + bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW; + break; + + case OMAP_ECC_HAM1_CODE_HW: + debug("nand: selected OMAP_ECC_HAM1_CODE_HW\n"); + /* check ecc-scheme requirements before updating ecc info */ + if ((3 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) { + printf("nand: error: insufficient OOB: require=%d\n", ( + (3 * eccsteps) + BADBLOCK_MARKER_LENGTH)); + return -EINVAL; + } + bch_priv.control = NULL; + bch_priv.type = 0; + /* populate ecc specific fields */ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.strength = 1; + nand->ecc.size = SECTOR_BYTES; + nand->ecc.bytes = 3; + nand->ecc.hwctl = omap_enable_hwecc; + nand->ecc.correct = omap_correct_data; + nand->ecc.calculate = omap_calculate_ecc; + /* define ecc-layout */ + ecclayout->eccbytes = nand->ecc.bytes * eccsteps; + for (i = 0; i < ecclayout->eccbytes; i++) + ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - + BADBLOCK_MARKER_LENGTH; + bch->ecc_scheme = OMAP_ECC_HAM1_CODE_HW; + break; + + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: +#ifdef CONFIG_BCH + debug("nand: selected OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n"); + /* check ecc-scheme requirements before updating ecc info */ + if ((13 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) { + printf("nand: error: insufficient OOB: require=%d\n", ( + (13 * eccsteps) + BADBLOCK_MARKER_LENGTH)); + return -EINVAL; + } + /* check if BCH S/W library can be used for error detection */ + bch_priv.control = init_bch(13, 8, 0x201b); + if (!bch_priv.control) { + printf("nand: error: could not init_bch()\n"); + return -ENODEV; + } + bch_priv.type = ECC_BCH8; + /* populate ecc specific fields */ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.strength = 8; + nand->ecc.size = SECTOR_BYTES; + nand->ecc.bytes = 13; + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch_sw; + nand->ecc.calculate = omap_calculate_ecc_bch_sw; + /* define ecc-layout */ + ecclayout->eccbytes = nand->ecc.bytes * eccsteps; + ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + for (i = 1; i < ecclayout->eccbytes; i++) { + if (i % nand->ecc.bytes) + ecclayout->eccpos[i] = + ecclayout->eccpos[i - 1] + 1; + else + ecclayout->eccpos[i] = + ecclayout->eccpos[i - 1] + 2; + } + ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - + BADBLOCK_MARKER_LENGTH; + omap_hwecc_init_bch(nand, NAND_ECC_READ); + bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW; + break; +#else + printf("nand: error: CONFIG_BCH required for ECC\n"); + return -EINVAL; +#endif + + case OMAP_ECC_BCH8_CODE_HW: +#ifdef CONFIG_NAND_OMAP_ELM + debug("nand: selected OMAP_ECC_BCH8_CODE_HW\n"); + /* check ecc-scheme requirements before updating ecc info */ + if ((14 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) { + printf("nand: error: insufficient OOB: require=%d\n", ( + (14 * eccsteps) + BADBLOCK_MARKER_LENGTH)); + return -EINVAL; + } + /* intialize ELM for ECC error detection */ + elm_init(); + bch_priv.type = ECC_BCH8; + /* populate ecc specific fields */ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.strength = 8; + nand->ecc.size = SECTOR_BYTES; + nand->ecc.bytes = 14; + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch; + nand->ecc.calculate = omap_calculate_ecc_bch; + nand->ecc.read_page = omap_read_page_bch; + /* define ecc-layout */ + ecclayout->eccbytes = nand->ecc.bytes * eccsteps; + for (i = 0; i < ecclayout->eccbytes; i++) + ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - + BADBLOCK_MARKER_LENGTH; + bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW; + break; +#else + printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n"); + return -EINVAL; +#endif + + default: + debug("nand: error: ecc scheme not enabled or supported\n"); + return -EINVAL; + } + return 0; +} #ifndef CONFIG_SPL_BUILD /* @@ -763,77 +903,45 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd) * @eccstrength - the number of bits that could be corrected * (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16) */ -void omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) +int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) { struct nand_chip *nand; struct mtd_info *mtd; + int err = 0; if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[nand_curr_device].name) { - printf("Error: Can't switch ecc, no devices available\n"); - return; + printf("nand: error: no NAND devices found\n"); + return -ENODEV; } mtd = &nand_info[nand_curr_device]; nand = mtd->priv; - nand->options |= NAND_OWN_BUFFERS; - - /* Reset ecc interface */ - nand->ecc.mode = NAND_ECC_NONE; - nand->ecc.read_page = NULL; - nand->ecc.write_page = NULL; - nand->ecc.read_oob = NULL; - nand->ecc.write_oob = NULL; - nand->ecc.hwctl = NULL; - nand->ecc.correct = NULL; - nand->ecc.calculate = NULL; - nand->ecc.strength = eccstrength; - /* Setup the ecc configurations again */ if (hardware) { if (eccstrength == 1) { - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_nand_oob; - nand->ecc.size = 512; - nand->ecc.bytes = 3; - nand->ecc.hwctl = omap_enable_hwecc; - nand->ecc.correct = omap_correct_data; - nand->ecc.calculate = omap_calculate_ecc; - omap_hwecc_init(nand); - printf("1-bit hamming HW ECC selected\n"); - } -#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) - else if (eccstrength == 8) { - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_bch8_nand_oob; - nand->ecc.size = 512; -#ifdef CONFIG_AM33XX - nand->ecc.bytes = 14; - nand->ecc.read_page = omap_read_page_bch; -#else - nand->ecc.bytes = 13; -#endif - nand->ecc.hwctl = omap_enable_ecc_bch; - nand->ecc.correct = omap_correct_data_bch; - nand->ecc.calculate = omap_calculate_ecc_bch; - omap_hwecc_init_bch(nand, NAND_ECC_READ); - printf("8-bit BCH HW ECC selected\n"); + err = omap_select_ecc_scheme(nand, + OMAP_ECC_HAM1_CODE_HW, + mtd->writesize, mtd->oobsize); + } else if (eccstrength == 8) { + err = omap_select_ecc_scheme(nand, + OMAP_ECC_BCH8_CODE_HW, + mtd->writesize, mtd->oobsize); + } else { + printf("nand: error: unsupported ECC scheme\n"); + return -EINVAL; } -#endif } else { - nand->ecc.mode = NAND_ECC_SOFT; - /* Use mtd default settings */ - nand->ecc.layout = NULL; - nand->ecc.size = 0; - printf("SW ECC selected\n"); + err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW, + mtd->writesize, mtd->oobsize); } /* Update NAND handling after ECC mode switch */ - nand_scan_tail(mtd); - - nand->options &= ~NAND_OWN_BUFFERS; + if (!err) + err = nand_scan_tail(mtd); + return err; } #endif /* CONFIG_SPL_BUILD */ @@ -856,7 +964,7 @@ int board_nand_init(struct nand_chip *nand) { int32_t gpmc_config = 0; cs = 0; - + int err = 0; /* * xloader/Uboot's gpmc configuration would have configured GPMC for * nand type of memory. The following logic scans and latches on to the @@ -873,7 +981,7 @@ int board_nand_init(struct nand_chip *nand) cs++; } if (cs >= GPMC_MAX_CS) { - printf("NAND: Unable to find NAND settings in " + printf("nand: error: Unable to find NAND settings in " "GPMC Configuration - quitting\n"); return -ENODEV; } @@ -885,64 +993,27 @@ int board_nand_init(struct nand_chip *nand) nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat; nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd; - - nand->cmd_ctrl = omap_nand_hwcontrol; - nand->options = NAND_NO_PADDING | NAND_CACHEPRG; + nand->priv = &bch_priv; + nand->cmd_ctrl = omap_nand_hwcontrol; + nand->options |= NAND_NO_PADDING | NAND_CACHEPRG; /* If we are 16 bit dev, our gpmc config tells us that */ if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000) nand->options |= NAND_BUSWIDTH_16; nand->chip_delay = 100; + nand->ecc.layout = &omap_ecclayout; -#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) -#ifdef CONFIG_AM33XX - /* AM33xx uses the ELM */ - /* required in case of BCH */ - elm_init(); -#else - /* - * Whereas other OMAP based SoC do not have the ELM, they use the BCH - * SW library. - */ - bch_priv.control = init_bch(13, 8, 0x201b /* hw polynominal */); - if (!bch_priv.control) { - puts("Could not init_bch()\n"); - return -ENODEV; - } -#endif - /* BCH info that will be correct for SPL or overridden otherwise. */ - nand->priv = &bch_priv; -#endif - - /* Default ECC mode */ -#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_bch8_nand_oob; - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; - nand->ecc.strength = 8; - nand->ecc.hwctl = omap_enable_ecc_bch; - nand->ecc.correct = omap_correct_data_bch; - nand->ecc.calculate = omap_calculate_ecc_bch; -#ifdef CONFIG_AM33XX - nand->ecc.read_page = omap_read_page_bch; -#endif - omap_hwecc_init_bch(nand, NAND_ECC_READ); -#else -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC) - nand->ecc.mode = NAND_ECC_SOFT; + /* select ECC scheme */ +#if defined(CONFIG_NAND_OMAP_ECCSCHEME) + err = omap_select_ecc_scheme(nand, CONFIG_NAND_OMAP_ECCSCHEME, + CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE); #else - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_nand_oob; - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; - nand->ecc.hwctl = omap_enable_hwecc; - nand->ecc.correct = omap_correct_data; - nand->ecc.calculate = omap_calculate_ecc; - nand->ecc.strength = 1; - omap_hwecc_init(nand); -#endif + /* pagesize and oobsize are not required to configure sw ecc-scheme */ + err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW, + 0, 0); #endif + if (err) + return err; #ifdef CONFIG_SPL_BUILD if (nand->options & NAND_BUSWIDTH_16) diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 067f8ef..979e4af 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -761,7 +761,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, uint8_t *oob_buf = this->oob_buf; free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; + i++, free++) { if (readcol >= lastgap) readcol += free->offset - lastgap; if (readend >= lastgap) @@ -770,7 +771,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, } this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize); free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; + i++, free++) { int free_end = free->offset + free->length; if (free->offset < readend && free_end > readcol) { int st = max_t(int,free->offset,readcol); @@ -1356,7 +1358,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf, unsigned int i; free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; + i++, free++) { if (writecol >= lastgap) writecol += free->offset - lastgap; if (writeend >= lastgap) @@ -1364,7 +1367,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf, lastgap = free->offset + free->length; } free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; + i++, free++) { int free_end = free->offset + free->length; if (free->offset < writeend && free_end > writecol) { int st = max_t(int,free->offset,writecol); @@ -2750,7 +2754,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) * the out of band area */ this->ecclayout->oobavail = 0; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && + + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && this->ecclayout->oobfree[i].length; i++) this->ecclayout->oobavail += this->ecclayout->oobfree[i].length; diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 8413d57..22155b4 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -96,7 +96,7 @@ static int mac_reset(struct eth_device *dev) ulong start; int timeout = CONFIG_MACRESET_TIMEOUT; - writel(DMAMAC_SRST, &dma_p->busmode); + writel(readl(&dma_p->busmode) | DMAMAC_SRST, &dma_p->busmode); if (priv->interface != PHY_INTERFACE_MODE_RGMII) writel(MII_PORTSELECT, &mac_p->conf); diff --git a/drivers/net/designware.h b/drivers/net/designware.h index e80002a..5440c92 100644 --- a/drivers/net/designware.h +++ b/drivers/net/designware.h @@ -112,7 +112,7 @@ struct dmamacdescr { u32 dmamac_cntl; void *dmamac_addr; struct dmamacdescr *dmamac_next; -}; +} __aligned(16); /* * txrx_status definitions @@ -224,8 +224,7 @@ struct dw_eth_dev { u32 tx_currdescnum; u32 rx_currdescnum; u32 phy_configured; - int link_printed; - u32 padding; + u32 link_printed; struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM]; struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM]; @@ -237,7 +236,7 @@ struct dw_eth_dev { struct eth_dma_regs *dma_regs_p; struct eth_device *dev; -} __attribute__ ((aligned(8))); +}; /* Speed specific definitions */ #define SPEED_10M 1 diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index f7170e0..b68d808 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -342,6 +342,15 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) DM9000_iow(DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS); printf("MAC: %pM\n", dev->enetaddr); + if (!is_valid_ether_addr(dev->enetaddr)) { +#ifdef CONFIG_RANDOM_MACADDR + printf("Bad MAC address (uninitialized EEPROM?), randomizing\n"); + eth_random_enetaddr(dev->enetaddr); + printf("MAC: %pM\n", dev->enetaddr); +#else + printf("WARNING: Bad MAC address (uninitialized EEPROM?)\n"); +#endif + } /* fill device MAC address registers */ for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++) diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 57aa53d..9a66e68 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -114,12 +114,13 @@ static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, static int32_t e1000_phy_hw_reset(struct e1000_hw *hw); static int e1000_phy_reset(struct e1000_hw *hw); static int e1000_detect_gig_phy(struct e1000_hw *hw); -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); static void e1000_set_media_type(struct e1000_hw *hw); static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); +#ifndef CONFIG_E1000_NO_NVM +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); @@ -885,6 +886,7 @@ static int e1000_validate_eeprom_checksum(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } +#endif /* CONFIG_E1000_NO_NVM */ /***************************************************************************** * Set PHY to class A mode @@ -897,6 +899,7 @@ static int e1000_validate_eeprom_checksum(struct e1000_hw *hw) static int32_t e1000_set_phy_mode(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM int32_t ret_val; uint16_t eeprom_data; @@ -923,10 +926,11 @@ e1000_set_phy_mode(struct e1000_hw *hw) hw->phy_reset_disable = false; } } - +#endif return E1000_SUCCESS; } +#ifndef CONFIG_E1000_NO_NVM /*************************************************************************** * * Obtaining software semaphore bit (SMBI) before resetting PHY. @@ -965,6 +969,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) return E1000_SUCCESS; } +#endif /*************************************************************************** * This function clears HW semaphore bits. @@ -977,6 +982,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM uint32_t swsm; DEBUGFUNC(); @@ -991,6 +997,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) } else swsm &= ~(E1000_SWSM_SWESMBI); E1000_WRITE_REG(hw, SWSM, swsm); +#endif } /*************************************************************************** @@ -1007,6 +1014,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM int32_t timeout; uint32_t swsm; @@ -1043,7 +1051,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) "SWESMBI bit is set.\n"); return -E1000_ERR_EEPROM; } - +#endif return E1000_SUCCESS; } @@ -1097,6 +1105,7 @@ static bool e1000_is_second_port(struct e1000_hw *hw) } } +#ifndef CONFIG_E1000_NO_NVM /****************************************************************************** * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the * second function of dual function devices @@ -1136,6 +1145,7 @@ e1000_read_mac_addr(struct eth_device *nic) #endif return 0; } +#endif /****************************************************************************** * Initializes receive address filters. @@ -1764,9 +1774,11 @@ static int e1000_setup_link(struct eth_device *nic) { struct e1000_hw *hw = nic->priv; - uint32_t ctrl_ext; int32_t ret_val; +#ifndef CONFIG_E1000_NO_NVM + uint32_t ctrl_ext; uint16_t eeprom_data; +#endif DEBUGFUNC(); @@ -1775,6 +1787,7 @@ e1000_setup_link(struct eth_device *nic) if (e1000_check_phy_reset_block(hw)) return E1000_SUCCESS; +#ifndef CONFIG_E1000_NO_NVM /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or @@ -1788,7 +1801,7 @@ e1000_setup_link(struct eth_device *nic) DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } - +#endif if (hw->fc == e1000_fc_default) { switch (hw->mac_type) { case e1000_ich8lan: @@ -1797,6 +1810,7 @@ e1000_setup_link(struct eth_device *nic) hw->fc = e1000_fc_full; break; default: +#ifndef CONFIG_E1000_NO_NVM ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data); if (ret_val) { @@ -1809,6 +1823,7 @@ e1000_setup_link(struct eth_device *nic) EEPROM_WORD0F_ASM_DIR) hw->fc = e1000_fc_tx_pause; else +#endif hw->fc = e1000_fc_full; break; } @@ -1828,6 +1843,7 @@ e1000_setup_link(struct eth_device *nic) DEBUGOUT("After fix-ups FlowControl is now = %x\n", hw->fc); +#ifndef CONFIG_E1000_NO_NVM /* Take the 4 bits from EEPROM word 0x0F that determine the initial * polarity value for the SW controlled pins, and setup the * Extended Device Control reg with that info. @@ -1840,6 +1856,7 @@ e1000_setup_link(struct eth_device *nic) SWDPIO__EXT_SHIFT); E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); } +#endif /* Call the necessary subroutine to configure the link. */ ret_val = (hw->media_type == e1000_media_type_fiber) ? @@ -5196,6 +5213,7 @@ e1000_initialize(bd_t * bis) e1000_reset_hw(hw); list_add_tail(&hw->list_node, &e1000_hw_list); +#ifndef CONFIG_E1000_NO_NVM /* Validate the EEPROM and get chipset information */ #if !defined(CONFIG_MVBC_1G) if (e1000_init_eeprom_params(hw)) { @@ -5206,11 +5224,17 @@ e1000_initialize(bd_t * bis) continue; #endif e1000_read_mac_addr(nic); +#endif e1000_get_bus_type(hw); +#ifndef CONFIG_E1000_NO_NVM printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n ", nic->enetaddr[0], nic->enetaddr[1], nic->enetaddr[2], nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]); +#else + memset(nic->enetaddr, 0, 6); + printf("e1000: no NVM\n"); +#endif /* Set up the function pointers and register the device */ nic->init = e1000_init; diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 25884f5..ff87af2 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -63,11 +63,14 @@ struct e1000_hw_stats; /* Internal E1000 helper functions */ struct e1000_hw *e1000_find_card(unsigned int cardnum); + +#ifndef CONFIG_E1000_NO_NVM int32_t e1000_acquire_eeprom(struct e1000_hw *hw); void e1000_standby_eeprom(struct e1000_hw *hw); void e1000_release_eeprom(struct e1000_hw *hw); void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd); void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd); +#endif #ifdef CONFIG_E1000_SPI int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw, @@ -1019,6 +1022,7 @@ struct e1000_hw_stats { uint64_t tsctfc; }; +#ifndef CONFIG_E1000_NO_NVM struct e1000_eeprom_info { e1000_eeprom_type type; uint16_t word_size; @@ -1029,6 +1033,7 @@ e1000_eeprom_type type; bool use_eerd; bool use_eewr; }; +#endif typedef enum { e1000_smart_speed_default = 0, @@ -1081,10 +1086,14 @@ struct e1000_hw { uint32_t io_base; #endif uint32_t asf_firmware_present; +#ifndef CONFIG_E1000_NO_NVM uint32_t eeprom_semaphore_present; +#endif uint32_t swfw_sync_present; uint32_t swfwhw_semaphore_present; +#ifndef CONFIG_E1000_NO_NVM struct e1000_eeprom_info eeprom; +#endif e1000_ms_type master_slave; e1000_ms_type original_master_slave; e1000_ffe_config ffe_config_state; diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c index ce36bd7..1d88e65 100644 --- a/drivers/net/fsl_mdio.c +++ b/drivers/net/fsl_mdio.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2010, 2013 Freescale Semiconductor, Inc. * Jun-jie Zhang <b18070@freescale.com> * Mingkai Hu <Mingkai.hu@freescale.com> * @@ -13,7 +13,7 @@ #include <asm/errno.h> #include <asm/fsl_enet.h> -void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr, +void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum, int value) { int timeout = 1000000; @@ -26,7 +26,7 @@ void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr, ; } -int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, +int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum) { int value; @@ -57,7 +57,8 @@ int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, static int fsl_pq_mdio_reset(struct mii_dev *bus) { - struct tsec_mii_mng *regs = bus->priv; + struct tsec_mii_mng __iomem *regs = + (struct tsec_mii_mng __iomem *)bus->priv; /* Reset MII (due to new addresses) */ out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT); @@ -72,7 +73,8 @@ static int fsl_pq_mdio_reset(struct mii_dev *bus) int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) { - struct tsec_mii_mng *phyregs = bus->priv; + struct tsec_mii_mng __iomem *phyregs = + (struct tsec_mii_mng __iomem *)bus->priv; return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum); } @@ -80,7 +82,8 @@ int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, u16 value) { - struct tsec_mii_mng *phyregs = bus->priv; + struct tsec_mii_mng __iomem *phyregs = + (struct tsec_mii_mng __iomem *)bus->priv; tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value); @@ -101,7 +104,7 @@ int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) bus->reset = fsl_pq_mdio_reset; sprintf(bus->name, info->name); - bus->priv = info->regs; + bus->priv = (void *)info->regs; return mdio_register(bus); } diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 6c901d1..0cd06b6 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -420,8 +420,9 @@ static int mvgbe_init(struct eth_device *dev) { struct mvgbe_device *dmvgbe = to_mvgbe(dev); struct mvgbe_registers *regs = dmvgbe->regs; -#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \ - && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN) +#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && \ + !defined(CONFIG_PHYLIB) && \ + defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) int i; #endif /* setup RX rings */ diff --git a/drivers/net/npe/Makefile b/drivers/net/npe/Makefile index e36c0bb..0779255 100644 --- a/drivers/net/npe/Makefile +++ b/drivers/net/npe/Makefile @@ -8,7 +8,6 @@ LOCAL_CFLAGS += -I$(TOPDIR)/drivers/net/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux CFLAGS += $(LOCAL_CFLAGS) CPPFLAGS += $(LOCAL_CFLAGS) # needed for depend -HOSTCFLAGS += $(LOCAL_CFLAGS) obj-y := npe.o \ miiphy.o \ diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 0f2dfd6..b20b4df 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -40,7 +40,7 @@ static int ar8035_config(struct phy_device *phydev) static struct phy_driver AR8021_driver = { .name = "AR8021", .uid = 0x4dd040, - .mask = 0xfffff0, + .mask = 0x4fffff, .features = PHY_GBIT_FEATURES, .config = ar8021_config, .startup = genphy_startup, @@ -48,11 +48,11 @@ static struct phy_driver AR8021_driver = { }; static struct phy_driver AR8031_driver = { - .name = "AR8031", + .name = "AR8031/AR8033", .uid = 0x4dd074, - .mask = 0xfffff0, + .mask = 0x4fffff, .features = PHY_GBIT_FEATURES, - .config = genphy_config, + .config = ar8021_config, .startup = genphy_startup, .shutdown = genphy_shutdown, }; diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index a7450f8..5d7e3be 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -100,6 +100,19 @@ int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum) return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR); } + +static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr, + int regnum) +{ + return ksz9021_phy_extended_read(phydev, regnum); +} + +static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) +{ + return ksz9021_phy_extended_write(phydev, regnum, val); +} + /* Micrel ksz9021 */ static int ksz9021_config(struct phy_device *phydev) { @@ -131,6 +144,8 @@ static struct phy_driver ksz9021_driver = { .config = &ksz9021_config, .startup = &ksz90xx_startup, .shutdown = &genphy_shutdown, + .writeext = &ksz9021_phy_extwrite, + .readext = &ksz9021_phy_extread, }; #endif @@ -171,14 +186,31 @@ int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr, return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA); } +static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr, + int regnum) +{ + return ksz9031_phy_extended_read(phydev, devaddr, regnum, + MII_KSZ9031_MOD_DATA_NO_POST_INC); +}; + +static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) +{ + return ksz9031_phy_extended_write(phydev, devaddr, regnum, + MII_KSZ9031_MOD_DATA_POST_INC_RW, val); +}; + + static struct phy_driver ksz9031_driver = { .name = "Micrel ksz9031", .uid = 0x221620, - .mask = 0xfffffe, + .mask = 0xfffff0, .features = PHY_GBIT_FEATURES, .config = &genphy_config, .startup = &ksz90xx_startup, .shutdown = &genphy_shutdown, + .writeext = &ksz9031_phy_extwrite, + .readext = &ksz9031_phy_extread, }; int phy_micrel_init(void) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 62925bb..c691fbb 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -275,13 +275,14 @@ int genphy_parse_link(struct phy_device *phydev) int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); /* We're using autonegotiation */ - if (mii_reg & BMSR_ANEGCAPABLE) { + if (phydev->supported & SUPPORTED_Autoneg) { u32 lpa = 0; int gblpa = 0; u32 estatus = 0; /* Check for gigabit capability */ - if (mii_reg & BMSR_ERCAP) { + if (phydev->supported & (SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half)) { /* We want a list of states supported by * both PHYs in the link */ diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index ddbbc35..a3ace68 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -102,7 +102,7 @@ static int rtl8211x_startup(struct phy_device *phydev) static struct phy_driver RTL8211B_driver = { .name = "RealTek RTL8211B", .uid = 0x1cc910, - .mask = 0xfffff0, + .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .config = &rtl8211x_config, .startup = &rtl8211x_startup, @@ -113,7 +113,7 @@ static struct phy_driver RTL8211B_driver = { static struct phy_driver RTL8211E_driver = { .name = "RealTek RTL8211E", .uid = 0x1cc915, - .mask = 0xfffff0, + .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .config = &rtl8211x_config, .startup = &rtl8211x_startup, @@ -124,7 +124,7 @@ static struct phy_driver RTL8211E_driver = { static struct phy_driver RTL8211DN_driver = { .name = "RealTek RTL8211DN", .uid = 0x1cc914, - .mask = 0xfffff0, + .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .config = &rtl8211x_config, .startup = &rtl8211x_startup, diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 60ed92d..bfd9815 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -12,6 +12,7 @@ */ #include <miiphy.h> +/* This code does not check the partner abilities. */ static int smsc_parse_status(struct phy_device *phydev) { int mii_reg; @@ -64,7 +65,7 @@ static struct phy_driver lan8710_driver = { .mask = 0xffff0, .features = PHY_BASIC_FEATURES, .config = &genphy_config_aneg, - .startup = &smsc_startup, + .startup = &genphy_startup, .shutdown = &genphy_shutdown, }; diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 5cf103e..c555979 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -49,6 +49,15 @@ #define MIIM_VSC8574_18G_QSGMII 0x80e0 #define MIIM_VSC8574_18G_CMDSTAT 0x8000 +/* Vitesse VSC8514 control register */ +#define MIIM_VSC8514_GENERAL18 0x12 +#define MIIM_VSC8514_GENERAL19 0x13 +#define MIIM_VSC8514_GENERAL23 0x17 + +/* Vitesse VSC8514 gerenal purpose register 18 */ +#define MIIM_VSC8514_18G_QSGMII 0x80e0 +#define MIIM_VSC8514_18G_CMDSTAT 0x8000 + /* CIS8201 */ static int vitesse_config(struct phy_device *phydev) { @@ -148,7 +157,7 @@ static int vsc8601_config(struct phy_device *phydev) static int vsc8574_config(struct phy_device *phydev) { u32 val; - /* configure regiser 19G for MAC */ + /* configure register 19G for MAC */ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, PHY_EXT_PAGE_ACCESS_GENERAL); @@ -188,6 +197,53 @@ static int vsc8574_config(struct phy_device *phydev) return 0; } +static int vsc8514_config(struct phy_device *phydev) +{ + u32 val; + int timeout = 1000000; + + /* configure register to access 19G */ + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, + PHY_EXT_PAGE_ACCESS_GENERAL); + + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19); + if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) { + /* set bit 15:14 to '01' for QSGMII mode */ + val = (val & 0x3fff) | (1 << 14); + phy_write(phydev, MDIO_DEVAD_NONE, + MIIM_VSC8514_GENERAL19, val); + /* Enable 4 ports MAC QSGMII */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18, + MIIM_VSC8514_18G_QSGMII); + } else { + /*TODO Add SGMII functionality once spec sheet + * for VSC8514 defines complete functionality + */ + } + + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18); + /* When bit 15 is cleared the command has completed */ + while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--) + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18); + + if (0 == timeout) { + printf("PHY 8514 config failed\n"); + return -1; + } + + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); + + /* configure register to access 23 */ + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23); + /* set bits 10:8 to '000' */ + val = (val & 0xf8ff); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val); + + genphy_config_aneg(phydev); + + return 0; +} + static struct phy_driver VSC8211_driver = { .name = "Vitesse VSC8211", .uid = 0xfc4b0, @@ -238,6 +294,16 @@ static struct phy_driver VSC8574_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver VSC8514_driver = { + .name = "Vitesse VSC8514", + .uid = 0x70570, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vsc8514_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + static struct phy_driver VSC8601_driver = { .name = "Vitesse VSC8601", .uid = 0x70420, @@ -298,6 +364,7 @@ int phy_vitesse_init(void) phy_register(&VSC8211_driver); phy_register(&VSC8221_driver); phy_register(&VSC8574_driver); + phy_register(&VSC8514_driver); phy_register(&VSC8662_driver); phy_register(&cis8201_driver); phy_register(&cis8204_driver); diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index 4186699..208ce5c 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -188,7 +188,7 @@ static int rtl_transmit(struct eth_device *dev, void *packet, int length); static int rtl_poll(struct eth_device *dev); static void rtl_disable(struct eth_device *dev); #ifdef CONFIG_MCAST_TFTP/* This driver already accepts all b/mcast */ -static int rtl_bcast_addr (struct eth_device *dev, u8 bcast_mac, u8 set) +static int rtl_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, u8 set) { return (0); } diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c index 13fa9c0..d040ab1 100644 --- a/drivers/net/rtl8169.c +++ b/drivers/net/rtl8169.c @@ -246,6 +246,8 @@ static struct { {"RTL-8169sc/8110sc", 0x18, 0xff7e1880,}, {"RTL-8168b/8111sb", 0x30, 0xff7e1880,}, {"RTL-8168b/8111sb", 0x38, 0xff7e1880,}, + {"RTL-8168d/8111d", 0x28, 0xff7e1880,}, + {"RTL-8168evl/8111evl", 0x2e, 0xff7e1880,}, {"RTL-8101e", 0x34, 0xff7e1880,}, {"RTL-8100e", 0x32, 0xff7e1880,}, }; @@ -314,6 +316,7 @@ static const unsigned int rtl8169_rx_config = static struct pci_device_id supported[] = { {PCI_VENDOR_ID_REALTEK, 0x8167}, + {PCI_VENDOR_ID_REALTEK, 0x8168}, {PCI_VENDOR_ID_REALTEK, 0x8169}, {} }; @@ -394,6 +397,50 @@ match: return 0; } +/* + * Cache maintenance functions. These are simple wrappers around the more + * general purpose flush_cache() and invalidate_dcache_range() functions. + */ + +static void rtl_inval_rx_desc(struct RxDesc *desc) +{ + unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1); + unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN); + + invalidate_dcache_range(start, end); +} + +static void rtl_flush_rx_desc(struct RxDesc *desc) +{ + flush_cache((unsigned long)desc, sizeof(*desc)); +} + +static void rtl_inval_tx_desc(struct TxDesc *desc) +{ + unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1); + unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN); + + invalidate_dcache_range(start, end); +} + +static void rtl_flush_tx_desc(struct TxDesc *desc) +{ + flush_cache((unsigned long)desc, sizeof(*desc)); +} + +static void rtl_inval_buffer(void *buf, size_t size) +{ + unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1); + unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN); + + invalidate_dcache_range(start, end); +} + +static void rtl_flush_buffer(void *buf, size_t size) +{ + flush_cache((unsigned long)buf, size); +} + /************************************************************************** RECV - Receive a frame ***************************************************************************/ @@ -411,14 +458,16 @@ static int rtl_recv(struct eth_device *dev) ioaddr = dev->iobase; cur_rx = tpc->cur_rx; - flush_cache((unsigned long)&tpc->RxDescArray[cur_rx], - sizeof(struct RxDesc)); + + rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]); + if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) { if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) { unsigned char rxdata[RX_BUF_LEN]; length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx]. status) & 0x00001FFF) - 4; + rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length); memcpy(rxdata, tpc->RxBufferRing[cur_rx], length); NetReceive(rxdata, length); @@ -430,8 +479,7 @@ static int rtl_recv(struct eth_device *dev) cpu_to_le32(OWNbit + RX_BUF_SIZE); tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(bus_to_phys(tpc->RxBufferRing[cur_rx])); - flush_cache((unsigned long)tpc->RxBufferRing[cur_rx], - RX_BUF_SIZE); + rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]); } else { puts("Error Rx"); } @@ -473,7 +521,7 @@ static int rtl_send(struct eth_device *dev, void *packet, int length) /* point to the current txb incase multiple tx_rings are used */ ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE]; memcpy(ptxb, (char *)packet, (int)length); - flush_cache((unsigned long)ptxb, length); + rtl_flush_buffer(ptxb, length); while (len < ETH_ZLEN) ptxb[len++] = '\0'; @@ -489,20 +537,20 @@ static int rtl_send(struct eth_device *dev, void *packet, int length) cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | ((len > ETH_ZLEN) ? len : ETH_ZLEN)); } + rtl_flush_tx_desc(&tpc->TxDescArray[entry]); RTL_W8(TxPoll, 0x40); /* set polling bit */ tpc->cur_tx++; to = currticks() + TX_TIMEOUT; do { - flush_cache((unsigned long)&tpc->TxDescArray[entry], - sizeof(struct TxDesc)); + rtl_inval_tx_desc(&tpc->TxDescArray[entry]); } while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit) && (currticks() < to)); /* wait */ if (currticks() >= to) { #ifdef DEBUG_RTL8169_TX - puts ("tx timeout/error\n"); - printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + puts("tx timeout/error\n"); + printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif ret = 0; } else { @@ -604,7 +652,7 @@ static void rtl8169_hw_start(struct eth_device *dev) RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000); #ifdef DEBUG_RTL8169 - printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif } @@ -638,11 +686,11 @@ static void rtl8169_init_ring(struct eth_device *dev) tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE]; tpc->RxDescArray[i].buf_addr = cpu_to_le32(bus_to_phys(tpc->RxBufferRing[i])); - flush_cache((unsigned long)tpc->RxBufferRing[i], RX_BUF_SIZE); + rtl_flush_rx_desc(&tpc->RxDescArray[i]); } #ifdef DEBUG_RTL8169 - printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif } @@ -683,7 +731,7 @@ static int rtl_reset(struct eth_device *dev, bd_t *bis) txb[5] = dev->enetaddr[5]; #ifdef DEBUG_RTL8169 - printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif return 0; } @@ -869,11 +917,25 @@ int rtl8169_initialize(bd_t *bis) int idx=0; while(1){ + unsigned int region; + u16 device; + /* Find RTL8169 */ if ((devno = pci_find_devices(supported, idx++)) < 0) break; - pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); + pci_read_config_word(devno, PCI_DEVICE_ID, &device); + switch (device) { + case 0x8168: + region = 2; + break; + + default: + region = 1; + break; + } + + pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase); iobase &= ~0xf; debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase); diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index d5a83e0..5e132f2 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -4,6 +4,7 @@ * Copyright (C) 2008, 2011 Renesas Solutions Corp. * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com> + * Copyright (C) 2013 Renesas Electronics Corporation * * SPDX-License-Identifier: GPL-2.0+ */ @@ -25,13 +26,31 @@ #ifndef CONFIG_SH_ETHER_PHY_ADDR # error "Please define CONFIG_SH_ETHER_PHY_ADDR" #endif -#ifdef CONFIG_SH_ETHER_CACHE_WRITEBACK -#define flush_cache_wback(addr, len) \ - dcache_wback_range((u32)addr, (u32)(addr + len - 1)) + +#if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF) +#define flush_cache_wback(addr, len) \ + flush_dcache_range((u32)addr, (u32)(addr + len - 1)) #else #define flush_cache_wback(...) #endif +#if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM) +#define invalidate_cache(addr, len) \ + { \ + u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE; \ + u32 start, end; \ + \ + start = (u32)addr; \ + end = start + len; \ + start &= ~(line_size - 1); \ + end = ((end + line_size - 1) & ~(line_size - 1)); \ + \ + invalidate_dcache_range(start, end); \ + } +#else +#define invalidate_cache(...) +#endif + #define TIMEOUT_CNT 1000 int sh_eth_send(struct eth_device *dev, void *packet, int len) @@ -69,8 +88,11 @@ int sh_eth_send(struct eth_device *dev, void *packet, int len) /* Wait until packet is transmitted */ timeout = TIMEOUT_CNT; - while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--) + do { + invalidate_cache(port_info->tx_desc_cur, + sizeof(struct tx_desc_s)); udelay(100); + } while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--); if (timeout < 0) { printf(SHETHER_NAME ": transmit timeout\n"); @@ -94,12 +116,14 @@ int sh_eth_recv(struct eth_device *dev) uchar *packet; /* Check if the rx descriptor is ready */ + invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s)); if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) { /* Check for errors */ if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) { len = port_info->rx_desc_cur->rd1 & 0xffff; packet = (uchar *) ADDR_TO_P2(port_info->rx_desc_cur->rd2); + invalidate_cache(packet, len); NetReceive(packet, len); } @@ -108,7 +132,6 @@ int sh_eth_recv(struct eth_device *dev) port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE; else port_info->rx_desc_cur->rd0 = RD_RACT; - /* Point to the next descriptor */ port_info->rx_desc_cur++; if (port_info->rx_desc_cur >= @@ -237,15 +260,17 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) * Allocate rx data buffers. They must be 32 bytes aligned and in * P2 area */ - port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31); + port_info->rx_buf_malloc = malloc( + NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1); if (!port_info->rx_buf_malloc) { printf(SHETHER_NAME ": malloc failed\n"); ret = -ENOMEM; goto err_buf_malloc; } - tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) & - ~(32 - 1)); + tmp_addr = (u32)(((int)port_info->rx_buf_malloc + + (RX_BUF_ALIGNE_SIZE - 1)) & + ~(RX_BUF_ALIGNE_SIZE - 1)); port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr); /* Initialize all descriptors */ @@ -351,8 +376,9 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) struct phy_device *phy; /* Configure e-dmac registers */ - sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | EDMR_EL, - EDMR); + sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | + (EMDR_DESC | EDMR_EL), EDMR); + sh_eth_write(eth, 0, EESIPR); sh_eth_write(eth, 0, TRSCER); sh_eth_write(eth, 0, TFTR); @@ -384,6 +410,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) #if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740) sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII); +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) + sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR); #endif /* Configure phy */ ret = sh_eth_phy_config(eth); @@ -407,7 +435,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) sh_eth_write(eth, GECMR_100B, GECMR); #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) sh_eth_write(eth, 1, RTRATE); -#elif defined(CONFIG_CPU_SH7724) +#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \ + defined(CONFIG_R8A7791) val = ECMR_RTM; #endif } else if (phy->speed == 10) { diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index 9ad800e..8aa7109 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -31,6 +31,11 @@ #define ADDR_TO_P2(addr) (addr) #endif /* defined(CONFIG_SH) */ +/* base padding size is 16 */ +#ifndef CONFIG_SH_ETHER_ALIGNE_SIZE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 16 +#endif + /* Number of supported ports */ #define MAX_PORT_NUM 2 @@ -45,15 +50,16 @@ /* The size of the tx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ -#define TX_DESC_PADDING 4 -#define TX_DESC_SIZE (12 + TX_DESC_PADDING) +#define TX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) +/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ +#define TX_DESC_SIZE (12 + TX_DESC_PADDING) /* Tx descriptor. We always use 3 bytes of padding */ struct tx_desc_s { volatile u32 td0; u32 td1; u32 td2; /* Buffer start */ - u32 padding; + u8 padding[TX_DESC_PADDING]; /* aligned cache line size */ }; /* There is no limitation in the number of rx descriptors */ @@ -61,15 +67,18 @@ struct tx_desc_s { /* The size of the rx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ -#define RX_DESC_PADDING 4 +#define RX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) +/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ #define RX_DESC_SIZE (12 + RX_DESC_PADDING) +/* aligned cache line size */ +#define RX_BUF_ALIGNE_SIZE (CONFIG_SH_ETHER_ALIGNE_SIZE > 32 ? 64 : 32) /* Rx descriptor. We always use 4 bytes of padding */ struct rx_desc_s { volatile u32 rd0; volatile u32 rd1; u32 rd2; /* Buffer start */ - u32 padding; + u8 padding[TX_DESC_PADDING]; /* aligned cache line size */ }; struct sh_eth_info { @@ -157,6 +166,7 @@ enum { TLFRCR, CERCR, CEECR, + RMIIMR, /* R8A7790 */ MAFCR, RTRATE, CSMR, @@ -263,6 +273,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { [RMCR] = 0x0058, [TFUCR] = 0x0064, [RFOCR] = 0x0068, + [RMIIMR] = 0x006C, [FCFTR] = 0x0070, [RPADIR] = 0x0078, [TRIMD] = 0x007c, @@ -290,6 +301,9 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { #elif defined(CONFIG_R8A7740) #define SH_ETH_TYPE_GETHER #define BASE_IO_ADDR 0xE9A00000 +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) +#define SH_ETH_TYPE_ETHER +#define BASE_IO_ADDR 0xEE700200 #endif /* @@ -320,6 +334,14 @@ enum DMAC_M_BIT { #endif }; +#if CONFIG_SH_ETHER_ALIGNE_SIZE == 64 +# define EMDR_DESC EDMR_DL1 +#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 32 +# define EMDR_DESC EDMR_DL0 +#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 16 /* Default */ +# define EMDR_DESC 0 +#endif + /* RFLR */ #define RFLR_RFL_MIN 0x05EE /* Recv Frame length 1518 byte */ @@ -485,6 +507,8 @@ enum FELIC_MODE_BIT { ECMR_PRM = 0x00000001, #ifdef CONFIG_CPU_SH7724 ECMR_RTM = 0x00000010, +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) + ECMR_RTM = 0x00000004, #endif }; diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index f5e314b..e9138f0 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -5,7 +5,7 @@ * terms of the GNU Public License, Version 2, incorporated * herein by reference. * - * Copyright 2004-2011 Freescale Semiconductor, Inc. + * Copyright 2004-2011, 2013 Freescale Semiconductor, Inc. * (C) Copyright 2003, Motorola, Inc. * author Andy Fleming * @@ -25,21 +25,13 @@ DECLARE_GLOBAL_DATA_PTR; #define TX_BUF_CNT 2 -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -typedef volatile struct rtxbd { - txbd8_t txbd[TX_BUF_CNT]; - rxbd8_t rxbd[PKTBUFSRX]; -} RTXBD; - -#define MAXCONTROLLERS (8) - -static struct tsec_private *privlist[MAXCONTROLLERS]; -static int num_tsecs = 0; +static uint rx_idx; /* index of the current RX buffer */ +static uint tx_idx; /* index of the current TX buffer */ #ifdef __GNUC__ -static RTXBD rtx __attribute__ ((aligned(8))); +static struct txbd8 __iomem txbd[TX_BUF_CNT] __aligned(8); +static struct rxbd8 __iomem rxbd[PKTBUFSRX] __aligned(8); + #else #error "rtx must be 64-bit aligned" #endif @@ -57,7 +49,7 @@ static struct tsec_info_struct tsec_info[] = { #endif #ifdef CONFIG_MPC85XX_FEC { - .regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000), + .regs = TSEC_GET_REGS(2, 0x2000), .devname = CONFIG_MPC85XX_FEC_NAME, .phyaddr = FEC_PHY_ADDR, .flags = FEC_FLAGS, @@ -113,32 +105,31 @@ static void tsec_configure_serdes(struct tsec_private *priv) * result. * 2) Use the 8 most significant bits as a hash into a 256-entry * table. The table is controlled through 8 32-bit registers: - * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is - * gaddr7. This means that the 3 most significant bits in the + * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is entry + * 255. This means that the 3 most significant bits in the * hash index which gaddr register to use, and the 5 other bits * indicate which bit (assuming an IBM numbering scheme, which - * for PowerPC (tm) is usually the case) in the tregister holds + * for PowerPC (tm) is usually the case) in the register holds * the entry. */ static int -tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set) +tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set) { - struct tsec_private *priv = privlist[1]; - volatile tsec_t *regs = priv->regs; - volatile u32 *reg_array, value; - u8 result, whichbit, whichreg; - - result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff); - whichbit = result & 0x1f; /* the 5 LSB = which bit to set */ - whichreg = result >> 5; /* the 3 MSB = which reg to set it in */ - value = (1 << (31-whichbit)); - - reg_array = &(regs->hash.gaddr0); - - if (set) { - reg_array[whichreg] |= value; - } else { - reg_array[whichreg] &= ~value; - } + struct tsec_private *priv = (struct tsec_private *)dev->priv; + struct tsec __iomem *regs = priv->regs; + u32 result, value; + u8 whichbit, whichreg; + + result = ether_crc(MAC_ADDR_LEN, mcast_mac); + whichbit = (result >> 24) & 0x1f; /* the 5 LSB = which bit to set */ + whichreg = result >> 29; /* the 3 MSB = which reg to set it in */ + + value = 1 << (31-whichbit); + + if (set) + setbits_be32(®s->hash.gaddr0 + whichreg, value); + else + clrbits_be32(®s->hash.gaddr0 + whichreg, value); + return 0; } #endif /* Multicast TFTP ? */ @@ -147,7 +138,7 @@ tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set) * those we don't care about (unless zero is bad, in which case, * choose a more appropriate value) */ -static void init_registers(tsec_t *regs) +static void init_registers(struct tsec __iomem *regs) { /* Clear IEVENT */ out_be32(®s->ievent, IEVENT_INIT_CLEAR); @@ -175,7 +166,7 @@ static void init_registers(tsec_t *regs) out_be32(®s->rctrl, 0x00000000); /* Init RMON mib registers */ - memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t)); + memset((void *)®s->rmon, 0, sizeof(regs->rmon)); out_be32(®s->rmon.cam1, 0xffffffff); out_be32(®s->rmon.cam2, 0xffffffff); @@ -194,7 +185,7 @@ static void init_registers(tsec_t *regs) */ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev) { - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; u32 ecntrl, maccfg2; if (!phydev->link) { @@ -248,7 +239,7 @@ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev) void redundant_init(struct eth_device *dev) { struct tsec_private *priv = dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; uint t, count = 0; int fail = 1; static const u8 pkt[] = { @@ -281,23 +272,26 @@ void redundant_init(struct eth_device *dev) clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); do { + uint16_t status; tsec_send(dev, (void *)pkt, sizeof(pkt)); /* Wait for buffer to be received */ - for (t = 0; rtx.rxbd[rxIdx].status & RXBD_EMPTY; t++) { + for (t = 0; in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY; t++) { if (t >= 10 * TOUT_LOOP) { printf("%s: tsec: rx error\n", dev->name); break; } } - if (!memcmp(pkt, (void *)NetRxPackets[rxIdx], sizeof(pkt))) + if (!memcmp(pkt, (void *)NetRxPackets[rx_idx], sizeof(pkt))) fail = 0; - rtx.rxbd[rxIdx].length = 0; - rtx.rxbd[rxIdx].status = - RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0); - rxIdx = (rxIdx + 1) % PKTBUFSRX; + out_be16(&rxbd[rx_idx].length, 0); + status = RXBD_EMPTY; + if ((rx_idx + 1) == PKTBUFSRX) + status |= RXBD_WRAP; + out_be16(&rxbd[rx_idx].status, status); + rx_idx = (rx_idx + 1) % PKTBUFSRX; if (in_be32(®s->ievent) & IEVENT_BSY) { out_be32(®s->ievent, IEVENT_BSY); @@ -325,36 +319,39 @@ void redundant_init(struct eth_device *dev) */ static void startup_tsec(struct eth_device *dev) { - int i; struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; + uint16_t status; + int i; /* reset the indices to zero */ - rxIdx = 0; - txIdx = 0; + rx_idx = 0; + tx_idx = 0; #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 uint svr; #endif /* Point to the buffer descriptors */ - out_be32(®s->tbase, (unsigned int)(&rtx.txbd[txIdx])); - out_be32(®s->rbase, (unsigned int)(&rtx.rxbd[rxIdx])); + out_be32(®s->tbase, (u32)&txbd[0]); + out_be32(®s->rbase, (u32)&rxbd[0]); /* Initialize the Rx Buffer descriptors */ for (i = 0; i < PKTBUFSRX; i++) { - rtx.rxbd[i].status = RXBD_EMPTY; - rtx.rxbd[i].length = 0; - rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i]; + out_be16(&rxbd[i].status, RXBD_EMPTY); + out_be16(&rxbd[i].length, 0); + out_be32(&rxbd[i].bufptr, (u32)NetRxPackets[i]); } - rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP; + status = in_be16(&rxbd[PKTBUFSRX - 1].status); + out_be16(&rxbd[PKTBUFSRX - 1].status, status | RXBD_WRAP); /* Initialize the TX Buffer Descriptors */ for (i = 0; i < TX_BUF_CNT; i++) { - rtx.txbd[i].status = 0; - rtx.txbd[i].length = 0; - rtx.txbd[i].bufPtr = 0; + out_be16(&txbd[i].status, 0); + out_be16(&txbd[i].length, 0); + out_be32(&txbd[i].bufptr, 0); } - rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP; + status = in_be16(&txbd[TX_BUF_CNT - 1].status); + out_be16(&txbd[TX_BUF_CNT - 1].status, status | TXBD_WRAP); #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 svr = get_svr(); @@ -378,66 +375,67 @@ static void startup_tsec(struct eth_device *dev) */ static int tsec_send(struct eth_device *dev, void *packet, int length) { - int i; - int result = 0; struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; + uint16_t status; + int result = 0; + int i; /* Find an empty buffer descriptor */ - for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) { + for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) { if (i >= TOUT_LOOP) { debug("%s: tsec: tx buffers full\n", dev->name); return result; } } - rtx.txbd[txIdx].bufPtr = (uint) packet; - rtx.txbd[txIdx].length = length; - rtx.txbd[txIdx].status |= - (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT); + out_be32(&txbd[tx_idx].bufptr, (u32)packet); + out_be16(&txbd[tx_idx].length, length); + status = in_be16(&txbd[tx_idx].status); + out_be16(&txbd[tx_idx].status, status | + (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT)); /* Tell the DMA to go */ out_be32(®s->tstat, TSTAT_CLEAR_THALT); /* Wait for buffer to be transmitted */ - for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) { + for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) { if (i >= TOUT_LOOP) { debug("%s: tsec: tx error\n", dev->name); return result; } } - txIdx = (txIdx + 1) % TX_BUF_CNT; - result = rtx.txbd[txIdx].status & TXBD_STATS; + tx_idx = (tx_idx + 1) % TX_BUF_CNT; + result = in_be16(&txbd[tx_idx].status) & TXBD_STATS; return result; } static int tsec_recv(struct eth_device *dev) { - int length; struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; - while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) { - - length = rtx.rxbd[rxIdx].length; + while (!(in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY)) { + int length = in_be16(&rxbd[rx_idx].length); + uint16_t status = in_be16(&rxbd[rx_idx].status); /* Send the packet up if there were no errors */ - if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) { - NetReceive(NetRxPackets[rxIdx], length - 4); - } else { - printf("Got error %x\n", - (rtx.rxbd[rxIdx].status & RXBD_STATS)); - } + if (!(status & RXBD_STATS)) + NetReceive(NetRxPackets[rx_idx], length - 4); + else + printf("Got error %x\n", (status & RXBD_STATS)); - rtx.rxbd[rxIdx].length = 0; + out_be16(&rxbd[rx_idx].length, 0); + status = RXBD_EMPTY; /* Set the wrap bit if this is the last element in the list */ - rtx.rxbd[rxIdx].status = - RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0); + if ((rx_idx + 1) == PKTBUFSRX) + status |= RXBD_WRAP; + out_be16(&rxbd[rx_idx].status, status); - rxIdx = (rxIdx + 1) % PKTBUFSRX; + rx_idx = (rx_idx + 1) % PKTBUFSRX; } if (in_be32(®s->ievent) & IEVENT_BSY) { @@ -453,7 +451,7 @@ static int tsec_recv(struct eth_device *dev) static void tsec_halt(struct eth_device *dev) { struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); setbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); @@ -475,11 +473,9 @@ static void tsec_halt(struct eth_device *dev) */ static int tsec_init(struct eth_device *dev, bd_t * bd) { - uint tempval; - char tmpbuf[MAC_ADDR_LEN]; - int i; struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; + u32 tempval; int ret; /* Make sure the controller is stopped */ @@ -492,16 +488,16 @@ static int tsec_init(struct eth_device *dev, bd_t * bd) out_be32(®s->ecntrl, ECNTRL_INIT_SETTINGS); /* Copy the station address into the address registers. - * Backwards, because little endian MACS are dumb */ - for (i = 0; i < MAC_ADDR_LEN; i++) - tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i]; - - tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) | - tmpbuf[3]; + * For a station address of 0x12345678ABCD in transmission + * order (BE), MACnADDR1 is set to 0xCDAB7856 and + * MACnADDR2 is set to 0x34120000. + */ + tempval = (dev->enetaddr[5] << 24) | (dev->enetaddr[4] << 16) | + (dev->enetaddr[3] << 8) | dev->enetaddr[2]; out_be32(®s->macstnaddr1, tempval); - tempval = *((uint *) (tmpbuf + 4)); + tempval = (dev->enetaddr[1] << 24) | (dev->enetaddr[0] << 16); out_be32(®s->macstnaddr2, tempval); @@ -527,7 +523,7 @@ static int tsec_init(struct eth_device *dev, bd_t * bd) static phy_interface_t tsec_get_interface(struct tsec_private *priv) { - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; u32 ecntrl; ecntrl = in_be32(®s->ecntrl); @@ -576,7 +572,7 @@ static int init_phy(struct eth_device *dev) { struct tsec_private *priv = (struct tsec_private *)dev->priv; struct phy_device *phydev; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; u32 supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | @@ -626,7 +622,6 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info) if (NULL == priv) return 0; - privlist[num_tsecs++] = priv; priv->regs = tsec_info->regs; priv->phyregs_sgmii = tsec_info->miiregs_sgmii; @@ -684,7 +679,7 @@ int tsec_standard_init(bd_t *bis) { struct fsl_pq_mdio_info info; - info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + info.regs = TSEC_GET_MDIO_REGS_BASE(1); info.name = DEFAULT_MII_NAME; fsl_pq_mdio_init(bis, &info); diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 236a753..6a017a8 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -43,11 +43,6 @@ #define ZYNQ_GEM_TXBUF_WRAP_MASK 0x40000000 #define ZYNQ_GEM_TXBUF_LAST_MASK 0x00008000 /* Last buffer */ -#define ZYNQ_GEM_TXSR_HRESPNOK_MASK 0x00000100 /* Transmit hresp not OK */ -#define ZYNQ_GEM_TXSR_URUN_MASK 0x00000040 /* Transmit underrun */ -/* Transmit buffs exhausted mid frame */ -#define ZYNQ_GEM_TXSR_BUFEXH_MASK 0x00000010 - #define ZYNQ_GEM_NWCTRL_TXEN_MASK 0x00000008 /* Enable transmit */ #define ZYNQ_GEM_NWCTRL_RXEN_MASK 0x00000004 /* Enable receive */ #define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */ @@ -90,6 +85,11 @@ */ #define PHY_DETECT_MASK 0x1808 +/* TX BD status masks */ +#define ZYNQ_GEM_TXBUF_FRMLEN_MASK 0x000007ff +#define ZYNQ_GEM_TXBUF_EXHAUSTED 0x08000000 +#define ZYNQ_GEM_TXBUF_UNDERRUN 0x10000000 + /* Device registers */ struct zynq_gem_regs { u32 nwctrl; /* Network Control reg */ @@ -123,12 +123,18 @@ struct emac_bd { }; #define RX_BUF 3 +/* Page table entries are set to 1MB, or multiples of 1MB + * (not < 1MB). driver uses less bd's so use 1MB bdspace. + */ +#define BD_SPACE 0x100000 +/* BD separation space */ +#define BD_SEPRN_SPACE 64 /* Initialized, rxbd_current, rx_first_buf must be 0 after init */ struct zynq_gem_priv { - struct emac_bd tx_bd; - struct emac_bd rx_bd[RX_BUF]; - char rxbuffers[RX_BUF * PKTSIZE_ALIGN]; + struct emac_bd *tx_bd; + struct emac_bd *rx_bd; + char *rxbuffers; u32 rxbd_current; u32 rx_first_buf; int phyaddr; @@ -299,20 +305,18 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) readl(®s->stat[i]); /* Setup RxBD space */ - memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd)); - /* Create the RxBD ring */ - memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers)); + memset(priv->rx_bd, 0, RX_BUF * sizeof(struct emac_bd)); for (i = 0; i < RX_BUF; i++) { priv->rx_bd[i].status = 0xF0000000; priv->rx_bd[i].addr = - (u32)((char *)&(priv->rxbuffers) + + ((u32)(priv->rxbuffers) + (i * PKTSIZE_ALIGN)); } /* WRAP bit to last BD */ priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK; /* Write RxBDs to IP */ - writel((u32)&(priv->rx_bd), ®s->rxqbase); + writel((u32)priv->rx_bd, ®s->rxqbase); /* Setup for DMA Configuration register */ writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr); @@ -368,32 +372,35 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) static int zynq_gem_send(struct eth_device *dev, void *ptr, int len) { - u32 status; + u32 addr, size; struct zynq_gem_priv *priv = dev->priv; struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase; - const u32 mask = ZYNQ_GEM_TXSR_HRESPNOK_MASK | \ - ZYNQ_GEM_TXSR_URUN_MASK | ZYNQ_GEM_TXSR_BUFEXH_MASK; /* setup BD */ - writel((u32)&(priv->tx_bd), ®s->txqbase); + writel((u32)priv->tx_bd, ®s->txqbase); /* Setup Tx BD */ - memset((void *)&(priv->tx_bd), 0, sizeof(struct emac_bd)); + memset(priv->tx_bd, 0, sizeof(struct emac_bd)); + + priv->tx_bd->addr = (u32)ptr; + priv->tx_bd->status = (len & ZYNQ_GEM_TXBUF_FRMLEN_MASK) | + ZYNQ_GEM_TXBUF_LAST_MASK; - priv->tx_bd.addr = (u32)ptr; - priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK; + addr = (u32) ptr; + addr &= ~(ARCH_DMA_MINALIGN - 1); + size = roundup(len, ARCH_DMA_MINALIGN); + flush_dcache_range(addr, addr + size); + barrier(); /* Start transmit */ setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK); - /* Read the stat register to know if the packet has been transmitted */ - status = readl(®s->txsr); - if (status & mask) - printf("Something has gone wrong here!? Status is 0x%x.\n", - status); + /* Read TX BD status */ + if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_UNDERRUN) + printf("TX underrun\n"); + if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_EXHAUSTED) + printf("TX buffers exhausted in mid frame\n"); - /* Clear Tx status register before leaving . */ - writel(status, ®s->txsr); return 0; } @@ -416,8 +423,12 @@ static int zynq_gem_recv(struct eth_device *dev) frame_len = current_bd->status & ZYNQ_GEM_RXBUF_LEN_MASK; if (frame_len) { - NetReceive((u8 *) (current_bd->addr & - ZYNQ_GEM_RXBUF_ADD_MASK), frame_len); + u32 addr = current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK; + addr &= ~(ARCH_DMA_MINALIGN - 1); + u32 size = roundup(frame_len, ARCH_DMA_MINALIGN); + invalidate_dcache_range(addr, addr + size); + + NetReceive((u8 *)addr, frame_len); if (current_bd->status & ZYNQ_GEM_RXBUF_SOF_MASK) priv->rx_first_buf = priv->rxbd_current; @@ -471,6 +482,7 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) { struct eth_device *dev; struct zynq_gem_priv *priv; + void *bd_space; dev = calloc(1, sizeof(*dev)); if (dev == NULL) @@ -483,6 +495,18 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) } priv = dev->priv; + /* Align rxbuffers to ARCH_DMA_MINALIGN */ + priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN); + memset(priv->rxbuffers, 0, RX_BUF * PKTSIZE_ALIGN); + + /* Align bd_space to 1MB */ + bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE); + mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE, DCACHE_OFF); + + /* Initialize the bd spaces for tx and rx bd's */ + priv->tx_bd = (struct emac_bd *)bd_space; + priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE); + priv->phyaddr = phy_addr; priv->emio = emio; |