diff options
Diffstat (limited to 'drivers')
43 files changed, 1633 insertions, 375 deletions
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 8a09aaf..51b1026 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -219,7 +219,7 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) ret = tret; } - return ret = 0 ? size : ret; + return ret; } static int dfu_read_buffer_fill(struct dfu_entity *dfu, void *buf, int size) diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index 651cfff..5e10ea7 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -184,66 +184,95 @@ int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf, return ret; } +/* + * @param s Parameter string containing space-separated arguments: + * 1st: + * raw (raw read/write) + * fat (files) + * ext4 (^) + * part (partition image) + * 2nd and 3rd: + * lba_start and lba_size, for raw write + * mmc_dev and mmc_part, for filesystems and part + */ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) { - int dev, part; - struct mmc *mmc; - block_dev_desc_t *blk_dev; - disk_partition_t partinfo; - char *st; - - dfu->dev_type = DFU_DEV_MMC; - st = strsep(&s, " "); - if (!strcmp(st, "mmc")) { - dfu->layout = DFU_RAW_ADDR; - dfu->data.mmc.lba_start = simple_strtoul(s, &s, 16); - dfu->data.mmc.lba_size = simple_strtoul(++s, &s, 16); - dfu->data.mmc.lba_blk_size = get_mmc_blk_size(dfu->dev_num); - } else if (!strcmp(st, "fat")) { - dfu->layout = DFU_FS_FAT; - } else if (!strcmp(st, "ext4")) { - dfu->layout = DFU_FS_EXT4; - } else if (!strcmp(st, "part")) { + const char *entity_type; + size_t second_arg; + size_t third_arg; - dfu->layout = DFU_RAW_ADDR; + struct mmc *mmc; - dev = simple_strtoul(s, &s, 10); - s++; - part = simple_strtoul(s, &s, 10); + const char *argv[3]; + const char **parg = argv; - mmc = find_mmc_device(dev); - if (mmc == NULL || mmc_init(mmc)) { - printf("%s: could not find mmc device #%d!\n", - __func__, dev); + for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) { + *parg = strsep(&s, " "); + if (*parg == NULL) { + error("Invalid number of arguments.\n"); return -ENODEV; } + } + + entity_type = argv[0]; + /* + * Base 0 means we'll accept (prefixed with 0x or 0) base 16, 8, + * with default 10. + */ + second_arg = simple_strtoul(argv[1], NULL, 0); + third_arg = simple_strtoul(argv[2], NULL, 0); - blk_dev = &mmc->block_dev; - if (get_partition_info(blk_dev, part, &partinfo) != 0) { - printf("%s: could not find partition #%d on mmc device #%d!\n", - __func__, part, dev); + mmc = find_mmc_device(dfu->dev_num); + if (mmc == NULL) { + error("Couldn't find MMC device no. %d.\n", dfu->dev_num); + return -ENODEV; + } + + if (mmc_init(mmc)) { + error("Couldn't init MMC device.\n"); + return -ENODEV; + } + + if (!strcmp(entity_type, "raw")) { + dfu->layout = DFU_RAW_ADDR; + dfu->data.mmc.lba_start = second_arg; + dfu->data.mmc.lba_size = third_arg; + dfu->data.mmc.lba_blk_size = mmc->read_bl_len; + } else if (!strcmp(entity_type, "part")) { + disk_partition_t partinfo; + block_dev_desc_t *blk_dev = &mmc->block_dev; + int mmcdev = second_arg; + int mmcpart = third_arg; + + if (get_partition_info(blk_dev, mmcpart, &partinfo) != 0) { + error("Couldn't find part #%d on mmc device #%d\n", + mmcpart, mmcdev); return -ENODEV; } - dfu->data.mmc.lba_start = partinfo.start; - dfu->data.mmc.lba_size = partinfo.size; - dfu->data.mmc.lba_blk_size = partinfo.blksz; - + dfu->layout = DFU_RAW_ADDR; + dfu->data.mmc.lba_start = partinfo.start; + dfu->data.mmc.lba_size = partinfo.size; + dfu->data.mmc.lba_blk_size = partinfo.blksz; + } else if (!strcmp(entity_type, "fat")) { + dfu->layout = DFU_FS_FAT; + } else if (!strcmp(entity_type, "ext4")) { + dfu->layout = DFU_FS_EXT4; } else { - printf("%s: Memory layout (%s) not supported!\n", __func__, st); + error("Memory layout (%s) not supported!\n", entity_type); return -ENODEV; } - if (dfu->layout == DFU_FS_EXT4 || dfu->layout == DFU_FS_FAT) { - dfu->data.mmc.dev = simple_strtoul(s, &s, 10); - dfu->data.mmc.part = simple_strtoul(++s, &s, 10); + /* if it's NOT a raw write */ + if (strcmp(entity_type, "raw")) { + dfu->data.mmc.dev = second_arg; + dfu->data.mmc.part = third_arg; } + dfu->dev_type = DFU_DEV_MMC; dfu->read_medium = dfu_read_medium_mmc; dfu->write_medium = dfu_write_medium_mmc; dfu->flush_medium = dfu_flush_medium_mmc; - - /* initial state */ dfu->inited = 0; return 0; diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 36d5e5f..e33586d 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -6,7 +6,6 @@ # obj-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o -obj-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o obj-$(CONFIG_DW_I2C) += designware_i2c.o obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o obj-$(CONFIG_I2C_MV) += mv_i2c.o @@ -16,6 +15,7 @@ obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o obj-$(CONFIG_U8500_I2C) += u8500_i2c.o obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o obj-$(CONFIG_SYS_I2C) += i2c_core.o +obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c index e56fe75..9ca99c4 100644 --- a/drivers/i2c/davinci_i2c.c +++ b/drivers/i2c/davinci_i2c.c @@ -1,8 +1,9 @@ /* * TI DaVinci (TMS320DM644x) I2C driver. * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net> * -------------------------------------------------------- * * SPDX-License-Identifier: GPL-2.0+ @@ -12,305 +13,372 @@ #include <i2c.h> #include <asm/arch/hardware.h> #include <asm/arch/i2c_defs.h> +#include <asm/io.h> +#include "davinci_i2c.h" #define CHECK_NACK() \ do {\ if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\ - REG(I2C_CON) = 0;\ - return(1);\ - }\ + REG(&(i2c_base->i2c_con)) = 0;\ + return 1;\ + } \ } while (0) +static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap); -static int wait_for_bus(void) +static int wait_for_bus(struct i2c_adapter *adap) { + struct i2c_regs *i2c_base = davinci_get_base(adap); int stat, timeout; - REG(I2C_STAT) = 0xffff; + REG(&(i2c_base->i2c_stat)) = 0xffff; for (timeout = 0; timeout < 10; timeout++) { - if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) { - REG(I2C_STAT) = 0xffff; - return(0); + stat = REG(&(i2c_base->i2c_stat)); + if (!((stat) & I2C_STAT_BB)) { + REG(&(i2c_base->i2c_stat)) = 0xffff; + return 0; } - REG(I2C_STAT) = stat; + REG(&(i2c_base->i2c_stat)) = stat; udelay(50000); } - REG(I2C_STAT) = 0xffff; - return(1); + REG(&(i2c_base->i2c_stat)) = 0xffff; + return 1; } -static int poll_i2c_irq(int mask) +static int poll_i2c_irq(struct i2c_adapter *adap, int mask) { + struct i2c_regs *i2c_base = davinci_get_base(adap); int stat, timeout; for (timeout = 0; timeout < 10; timeout++) { udelay(1000); - stat = REG(I2C_STAT); - if (stat & mask) { - return(stat); - } + stat = REG(&(i2c_base->i2c_stat)); + if (stat & mask) + return stat; } - REG(I2C_STAT) = 0xffff; - return(stat | I2C_TIMEOUT); + REG(&(i2c_base->i2c_stat)) = 0xffff; + return stat | I2C_TIMEOUT; } - -void flush_rx(void) +static void flush_rx(struct i2c_adapter *adap) { + struct i2c_regs *i2c_base = davinci_get_base(adap); + while (1) { - if (!(REG(I2C_STAT) & I2C_STAT_RRDY)) + if (!(REG(&(i2c_base->i2c_stat)) & I2C_STAT_RRDY)) break; - REG(I2C_DRR); - REG(I2C_STAT) = I2C_STAT_RRDY; + REG(&(i2c_base->i2c_drr)); + REG(&(i2c_base->i2c_stat)) = I2C_STAT_RRDY; udelay(1000); } } +static uint davinci_i2c_setspeed(struct i2c_adapter *adap, uint speed) +{ + struct i2c_regs *i2c_base = davinci_get_base(adap); + uint32_t div, psc; + + psc = 2; + /* SCLL + SCLH */ + div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10; + REG(&(i2c_base->i2c_psc)) = psc; /* 27MHz / (2 + 1) = 9MHz */ + REG(&(i2c_base->i2c_scll)) = (div * 50) / 100; /* 50% Duty */ + REG(&(i2c_base->i2c_sclh)) = div - REG(&(i2c_base->i2c_scll)); + + adap->speed = speed; + return 0; +} -void i2c_init(int speed, int slaveadd) +static void davinci_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) { - u_int32_t div, psc; + struct i2c_regs *i2c_base = davinci_get_base(adap); - if (REG(I2C_CON) & I2C_CON_EN) { - REG(I2C_CON) = 0; - udelay (50000); + if (REG(&(i2c_base->i2c_con)) & I2C_CON_EN) { + REG(&(i2c_base->i2c_con)) = 0; + udelay(50000); } - psc = 2; - div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10; /* SCLL + SCLH */ - REG(I2C_PSC) = psc; /* 27MHz / (2 + 1) = 9MHz */ - REG(I2C_SCLL) = (div * 50) / 100; /* 50% Duty */ - REG(I2C_SCLH) = div - REG(I2C_SCLL); + davinci_i2c_setspeed(adap, speed); - REG(I2C_OA) = slaveadd; - REG(I2C_CNT) = 0; + REG(&(i2c_base->i2c_oa)) = slaveadd; + REG(&(i2c_base->i2c_cnt)) = 0; /* Interrupts must be enabled or I2C module won't work */ - REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE | + REG(&(i2c_base->i2c_ie)) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE; /* Now enable I2C controller (get it out of reset) */ - REG(I2C_CON) = I2C_CON_EN; + REG(&(i2c_base->i2c_con)) = I2C_CON_EN; udelay(1000); } -int i2c_set_bus_speed(unsigned int speed) -{ - i2c_init(speed, CONFIG_SYS_I2C_SLAVE); - return 0; -} - -int i2c_probe(u_int8_t chip) +static int davinci_i2c_probe(struct i2c_adapter *adap, uint8_t chip) { + struct i2c_regs *i2c_base = davinci_get_base(adap); int rc = 1; - if (chip == REG(I2C_OA)) { - return(rc); - } + if (chip == REG(&(i2c_base->i2c_oa))) + return rc; - REG(I2C_CON) = 0; - if (wait_for_bus()) {return(1);} + REG(&(i2c_base->i2c_con)) = 0; + if (wait_for_bus(adap)) + return 1; /* try to read one byte from current (or only) address */ - REG(I2C_CNT) = 1; - REG(I2C_SA) = chip; - REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP); - udelay (50000); + REG(&(i2c_base->i2c_cnt)) = 1; + REG(&(i2c_base->i2c_sa)) = chip; + REG(&(i2c_base->i2c_con)) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | + I2C_CON_STP); + udelay(50000); - if (!(REG(I2C_STAT) & I2C_STAT_NACK)) { + if (!(REG(&(i2c_base->i2c_stat)) & I2C_STAT_NACK)) { rc = 0; - flush_rx(); - REG(I2C_STAT) = 0xffff; + flush_rx(adap); + REG(&(i2c_base->i2c_stat)) = 0xffff; } else { - REG(I2C_STAT) = 0xffff; - REG(I2C_CON) |= I2C_CON_STP; + REG(&(i2c_base->i2c_stat)) = 0xffff; + REG(&(i2c_base->i2c_con)) |= I2C_CON_STP; udelay(20000); - if (wait_for_bus()) {return(1);} + if (wait_for_bus(adap)) + return 1; } - flush_rx(); - REG(I2C_STAT) = 0xffff; - REG(I2C_CNT) = 0; - return(rc); + flush_rx(adap); + REG(&(i2c_base->i2c_stat)) = 0xffff; + REG(&(i2c_base->i2c_cnt)) = 0; + return rc; } - -int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len) +static int davinci_i2c_read(struct i2c_adapter *adap, uint8_t chip, + uint32_t addr, int alen, uint8_t *buf, int len) { - u_int32_t tmp; + struct i2c_regs *i2c_base = davinci_get_base(adap); + uint32_t tmp; int i; if ((alen < 0) || (alen > 2)) { - printf("%s(): bogus address length %x\n", __FUNCTION__, alen); - return(1); + printf("%s(): bogus address length %x\n", __func__, alen); + return 1; } - if (wait_for_bus()) {return(1);} + if (wait_for_bus(adap)) + return 1; if (alen != 0) { /* Start address phase */ tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX; - REG(I2C_CNT) = alen; - REG(I2C_SA) = chip; - REG(I2C_CON) = tmp; + REG(&(i2c_base->i2c_cnt)) = alen; + REG(&(i2c_base->i2c_sa)) = chip; + REG(&(i2c_base->i2c_con)) = tmp; - tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK); CHECK_NACK(); switch (alen) { - case 2: - /* Send address MSByte */ - if (tmp & I2C_STAT_XRDY) { - REG(I2C_DXR) = (addr >> 8) & 0xff; - } else { - REG(I2C_CON) = 0; - return(1); - } - - tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); - - CHECK_NACK(); - /* No break, fall through */ - case 1: - /* Send address LSByte */ - if (tmp & I2C_STAT_XRDY) { - REG(I2C_DXR) = addr & 0xff; - } else { - REG(I2C_CON) = 0; - return(1); - } - - tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY); - - CHECK_NACK(); - - if (!(tmp & I2C_STAT_ARDY)) { - REG(I2C_CON) = 0; - return(1); - } + case 2: + /* Send address MSByte */ + if (tmp & I2C_STAT_XRDY) { + REG(&(i2c_base->i2c_dxr)) = (addr >> 8) & 0xff; + } else { + REG(&(i2c_base->i2c_con)) = 0; + return 1; + } + + tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK); + + CHECK_NACK(); + /* No break, fall through */ + case 1: + /* Send address LSByte */ + if (tmp & I2C_STAT_XRDY) { + REG(&(i2c_base->i2c_dxr)) = addr & 0xff; + } else { + REG(&(i2c_base->i2c_con)) = 0; + return 1; + } + + tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | + I2C_STAT_NACK | I2C_STAT_ARDY); + + CHECK_NACK(); + + if (!(tmp & I2C_STAT_ARDY)) { + REG(&(i2c_base->i2c_con)) = 0; + return 1; + } } } /* Address phase is over, now read 'len' bytes and stop */ tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP; - REG(I2C_CNT) = len & 0xffff; - REG(I2C_SA) = chip; - REG(I2C_CON) = tmp; + REG(&(i2c_base->i2c_cnt)) = len & 0xffff; + REG(&(i2c_base->i2c_sa)) = chip; + REG(&(i2c_base->i2c_con)) = tmp; for (i = 0; i < len; i++) { - tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR); + tmp = poll_i2c_irq(adap, I2C_STAT_RRDY | I2C_STAT_NACK | + I2C_STAT_ROVR); CHECK_NACK(); if (tmp & I2C_STAT_RRDY) { - buf[i] = REG(I2C_DRR); + buf[i] = REG(&(i2c_base->i2c_drr)); } else { - REG(I2C_CON) = 0; - return(1); + REG(&(i2c_base->i2c_con)) = 0; + return 1; } } - tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK); + tmp = poll_i2c_irq(adap, I2C_STAT_SCD | I2C_STAT_NACK); CHECK_NACK(); if (!(tmp & I2C_STAT_SCD)) { - REG(I2C_CON) = 0; - return(1); + REG(&(i2c_base->i2c_con)) = 0; + return 1; } - flush_rx(); - REG(I2C_STAT) = 0xffff; - REG(I2C_CNT) = 0; - REG(I2C_CON) = 0; + flush_rx(adap); + REG(&(i2c_base->i2c_stat)) = 0xffff; + REG(&(i2c_base->i2c_cnt)) = 0; + REG(&(i2c_base->i2c_con)) = 0; - return(0); + return 0; } - -int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len) +static int davinci_i2c_write(struct i2c_adapter *adap, uint8_t chip, + uint32_t addr, int alen, uint8_t *buf, int len) { - u_int32_t tmp; + struct i2c_regs *i2c_base = davinci_get_base(adap); + uint32_t tmp; int i; if ((alen < 0) || (alen > 2)) { - printf("%s(): bogus address length %x\n", __FUNCTION__, alen); - return(1); + printf("%s(): bogus address length %x\n", __func__, alen); + return 1; } if (len < 0) { - printf("%s(): bogus length %x\n", __FUNCTION__, len); - return(1); + printf("%s(): bogus length %x\n", __func__, len); + return 1; } - if (wait_for_bus()) {return(1);} + if (wait_for_bus(adap)) + return 1; /* Start address phase */ - tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP; - REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen; - REG(I2C_SA) = chip; - REG(I2C_CON) = tmp; + tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | + I2C_CON_TRX | I2C_CON_STP; + REG(&(i2c_base->i2c_cnt)) = (alen == 0) ? + len & 0xffff : (len & 0xffff) + alen; + REG(&(i2c_base->i2c_sa)) = chip; + REG(&(i2c_base->i2c_con)) = tmp; switch (alen) { - case 2: - /* Send address MSByte */ - tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + case 2: + /* Send address MSByte */ + tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK); - CHECK_NACK(); + CHECK_NACK(); - if (tmp & I2C_STAT_XRDY) { - REG(I2C_DXR) = (addr >> 8) & 0xff; - } else { - REG(I2C_CON) = 0; - return(1); - } - /* No break, fall through */ - case 1: - /* Send address LSByte */ - tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + if (tmp & I2C_STAT_XRDY) { + REG(&(i2c_base->i2c_dxr)) = (addr >> 8) & 0xff; + } else { + REG(&(i2c_base->i2c_con)) = 0; + return 1; + } + /* No break, fall through */ + case 1: + /* Send address LSByte */ + tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK); - CHECK_NACK(); + CHECK_NACK(); - if (tmp & I2C_STAT_XRDY) { - REG(I2C_DXR) = addr & 0xff; - } else { - REG(I2C_CON) = 0; - return(1); - } + if (tmp & I2C_STAT_XRDY) { + REG(&(i2c_base->i2c_dxr)) = addr & 0xff; + } else { + REG(&(i2c_base->i2c_con)) = 0; + return 1; + } } for (i = 0; i < len; i++) { - tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK); CHECK_NACK(); - if (tmp & I2C_STAT_XRDY) { - REG(I2C_DXR) = buf[i]; - } else { - return(1); - } + if (tmp & I2C_STAT_XRDY) + REG(&(i2c_base->i2c_dxr)) = buf[i]; + else + return 1; } - tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK); + tmp = poll_i2c_irq(adap, I2C_STAT_SCD | I2C_STAT_NACK); CHECK_NACK(); if (!(tmp & I2C_STAT_SCD)) { - REG(I2C_CON) = 0; - return(1); + REG(&(i2c_base->i2c_con)) = 0; + return 1; } - flush_rx(); - REG(I2C_STAT) = 0xffff; - REG(I2C_CNT) = 0; - REG(I2C_CON) = 0; + flush_rx(adap); + REG(&(i2c_base->i2c_stat)) = 0xffff; + REG(&(i2c_base->i2c_cnt)) = 0; + REG(&(i2c_base->i2c_con)) = 0; + + return 0; +} + +static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap) +{ + switch (adap->hwadapnr) { +#if I2C_BUS_MAX >= 3 + case 2: + return (struct i2c_regs *)I2C2_BASE; +#endif +#if I2C_BUS_MAX >= 2 + case 1: + return (struct i2c_regs *)I2C1_BASE; +#endif + case 0: + return (struct i2c_regs *)I2C_BASE; + + default: + printf("wrong hwadapnr: %d\n", adap->hwadapnr); + } - return(0); + return NULL; } + +U_BOOT_I2C_ADAP_COMPLETE(davinci_0, davinci_i2c_init, davinci_i2c_probe, + davinci_i2c_read, davinci_i2c_write, + davinci_i2c_setspeed, + CONFIG_SYS_DAVINCI_I2C_SPEED, + CONFIG_SYS_DAVINCI_I2C_SLAVE, + 0) + +#if I2C_BUS_MAX >= 2 +U_BOOT_I2C_ADAP_COMPLETE(davinci_1, davinci_i2c_init, davinci_i2c_probe, + davinci_i2c_read, davinci_i2c_write, + davinci_i2c_setspeed, + CONFIG_SYS_DAVINCI_I2C_SPEED1, + CONFIG_SYS_DAVINCI_I2C_SLAVE1, + 1) +#endif + +#if I2C_BUS_MAX >= 3 +U_BOOT_I2C_ADAP_COMPLETE(davinci_2, davinci_i2c_init, davinci_i2c_probe, + davinci_i2c_read, davinci_i2c_write, + davinci_i2c_setspeed, + CONFIG_SYS_DAVINCI_I2C_SPEED2, + CONFIG_SYS_DAVINCI_I2C_SLAVE2, + 2) +#endif diff --git a/drivers/i2c/davinci_i2c.h b/drivers/i2c/davinci_i2c.h new file mode 100644 index 0000000..20d4342 --- /dev/null +++ b/drivers/i2c/davinci_i2c.h @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2004-2014 + * Texas Instruments, <www.ti.com> + * + * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _DAVINCI_I2C_H_ +#define _DAVINCI_I2C_H_ + +#define I2C_WRITE 0 +#define I2C_READ 1 + +struct i2c_regs { + u32 i2c_oa; + u32 i2c_ie; + u32 i2c_stat; + u32 i2c_scll; + u32 i2c_sclh; + u32 i2c_cnt; + u32 i2c_drr; + u32 i2c_sa; + u32 i2c_dxr; + u32 i2c_con; + u32 i2c_iv; + u32 res_2c; + u32 i2c_psc; +}; + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_SCD_IE (1 << 5) /* Stop condition detect interrupt enable */ +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_SCD (1 << 5) /* Stop condition detect */ +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ +#define I2C_INTCODE_SCD 6 /* Stop condition detect */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 5) /* I2C module enable */ +#define I2C_CON_STB (1 << 4) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Tx/Rx mode (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 11) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 13) /* Start condition (master mode only) */ +#define I2C_CON_FREE (1 << 14) /* Free run on emulation */ + +#define I2C_TIMEOUT 0xffff0000 /* Timeout mask for poll_i2c_irq() */ + +#endif diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c index f1f6513..b3264af 100644 --- a/drivers/i2c/zynq_i2c.c +++ b/drivers/i2c/zynq_i2c.c @@ -142,7 +142,7 @@ static u32 zynq_i2c_wait(struct zynq_i2c_registers *zynq_i2c, u32 mask) break; } #ifdef DEBUG - zynq_i2c_debug_status(zynq_i2c)); + zynq_i2c_debug_status(zynq_i2c); #endif /* Clear interrupt status flags */ writel(int_status & mask, &zynq_i2c->interrupt_status); @@ -235,7 +235,7 @@ static int zynq_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); #ifdef DEBUG - zynq_i2c_debug_status(); + zynq_i2c_debug_status(zynq_i2c); #endif return 0; } diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 02b149c..4eb354d 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -18,6 +18,9 @@ obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o obj-$(CONFIG_SPL_NAND_INIT) += nand.o +ifeq ($(CONFIG_SPL_ENV_SUPPORT),y) +obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o +endif else # not spl diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c index c84851b..bd89b06 100644 --- a/drivers/mtd/nand/am335x_spl_bch.c +++ b/drivers/mtd/nand/am335x_spl_bch.c @@ -16,7 +16,7 @@ #include <linux/mtd/nand_ecc.h> static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS; -static nand_info_t mtd; +nand_info_t nand_info[1]; static struct nand_chip nand_chip; #define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ @@ -30,12 +30,12 @@ static struct nand_chip nand_chip; static int nand_command(int block, int page, uint32_t offs, u8 cmd) { - struct nand_chip *this = mtd.priv; + struct nand_chip *this = nand_info[0].priv; int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; void (*hwctrl)(struct mtd_info *mtd, int cmd, unsigned int ctrl) = this->cmd_ctrl; - while (!this->dev_ready(&mtd)) + while (!this->dev_ready(&nand_info[0])) ; /* Emulate NAND_CMD_READOOB */ @@ -45,11 +45,11 @@ static int nand_command(int block, int page, uint32_t offs, } /* Begin command latch cycle */ - hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); + hwctrl(&nand_info[0], cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); if (cmd == NAND_CMD_RESET) { - hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!this->dev_ready(&mtd)) + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + while (!this->dev_ready(&nand_info[0])) ; return 0; } @@ -60,35 +60,35 @@ static int nand_command(int block, int page, uint32_t offs, /* Set ALE and clear CLE to start address cycle */ /* Column address */ - hwctrl(&mtd, offs & 0xff, + hwctrl(&nand_info[0], offs & 0xff, NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ - hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ + hwctrl(&nand_info[0], (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ /* Row address */ - hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ - hwctrl(&mtd, ((page_addr >> 8) & 0xff), + hwctrl(&nand_info[0], (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ + hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff), NAND_CTRL_ALE); /* A[27:20] */ #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE /* One more address cycle for devices > 128MiB */ - hwctrl(&mtd, (page_addr >> 16) & 0x0f, + hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f, NAND_CTRL_ALE); /* A[31:28] */ #endif - hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); if (cmd == NAND_CMD_READ0) { /* Latch in address */ - hwctrl(&mtd, NAND_CMD_READSTART, + hwctrl(&nand_info[0], NAND_CMD_READSTART, NAND_CTRL_CLE | NAND_CTRL_CHANGE); - hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * Wait a while for the data to be ready */ - while (!this->dev_ready(&mtd)) + while (!this->dev_ready(&nand_info[0])) ; } else if (cmd == NAND_CMD_RNDOUT) { - hwctrl(&mtd, NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE | + hwctrl(&nand_info[0], NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE | NAND_CTRL_CHANGE); - hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); } return 0; @@ -96,7 +96,7 @@ static int nand_command(int block, int page, uint32_t offs, static int nand_is_bad_block(int block) { - struct nand_chip *this = mtd.priv; + struct nand_chip *this = nand_info[0].priv; nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB); @@ -117,7 +117,7 @@ static int nand_is_bad_block(int block) static int nand_read_page(int block, int page, void *dst) { - struct nand_chip *this = mtd.priv; + struct nand_chip *this = nand_info[0].priv; u_char ecc_calc[ECCTOTAL]; u_char ecc_code[ECCTOTAL]; u_char oob_data[CONFIG_SYS_NAND_OOBSIZE]; @@ -133,15 +133,15 @@ static int nand_read_page(int block, int page, void *dst) nand_command(block, page, 0, NAND_CMD_READ0); for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - this->ecc.hwctl(&mtd, NAND_ECC_READ); + this->ecc.hwctl(&nand_info[0], NAND_ECC_READ); nand_command(block, page, data_pos, NAND_CMD_RNDOUT); - this->read_buf(&mtd, p, eccsize); + this->read_buf(&nand_info[0], p, eccsize); nand_command(block, page, oob_pos, NAND_CMD_RNDOUT); - this->read_buf(&mtd, oob, eccbytes); - this->ecc.calculate(&mtd, p, &ecc_calc[i]); + this->read_buf(&nand_info[0], oob, eccbytes); + this->ecc.calculate(&nand_info[0], p, &ecc_calc[i]); data_pos += eccsize; oob_pos += eccbytes; @@ -160,7 +160,7 @@ static int nand_read_page(int block, int page, void *dst) * from correct_data(). We just hope that all possible errors * are corrected by this routine. */ - this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); + this->ecc.correct(&nand_info[0], p, &ecc_code[i], &ecc_calc[i]); } return 0; @@ -206,13 +206,13 @@ void nand_init(void) /* * Init board specific nand support */ - mtd.priv = &nand_chip; + nand_info[0].priv = &nand_chip; nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE; board_nand_init(&nand_chip); if (nand_chip.select_chip) - nand_chip.select_chip(&mtd, 0); + nand_chip.select_chip(&nand_info[0], 0); /* NAND chip may require reset after power-on */ nand_command(0, 0, 0, NAND_CMD_RESET); @@ -222,5 +222,5 @@ void nand_init(void) void nand_deselect(void) { if (nand_chip.select_chip) - nand_chip.select_chip(&mtd, -1); + nand_chip.select_chip(&nand_info[0], -1); } diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 5b17d7b..75b03a7 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -609,6 +609,9 @@ void davinci_nand_init(struct nand_chip *nand) #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT nand->bbt_options |= NAND_BBT_USE_FLASH; #endif +#ifdef CONFIG_SYS_NAND_NO_SUBPAGE_WRITE + nand->options |= NAND_NO_SUBPAGE_WRITE; +#endif #ifdef CONFIG_SYS_NAND_HW_ECC nand->ecc.mode = NAND_ECC_HW; nand->ecc.size = 512; diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c index 2935530..1954b7e 100644 --- a/drivers/mtd/spi/spi_spl_load.c +++ b/drivers/mtd/spi/spi_spl_load.c @@ -13,6 +13,35 @@ #include <spi_flash.h> #include <spl.h> +#ifdef CONFIG_SPL_OS_BOOT +/* + * Load the kernel, check for a valid header we can parse, and if found load + * the kernel and then device tree. + */ +static int spi_load_image_os(struct spi_flash *flash, + struct image_header *header) +{ + /* Read for a header, parse or error out. */ + spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40, + (void *)header); + + if (image_get_magic(header) != IH_MAGIC) + return -1; + + spl_parse_image_header(header); + + spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, + spl_image.size, (void *)spl_image.load_addr); + + /* Read device tree. */ + spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS, + CONFIG_SYS_SPI_ARGS_SIZE, + (void *)CONFIG_SYS_SPL_ARGS_ADDR); + + return 0; +} +#endif + /* * The main entry for SPI booting. It's necessary that SDRAM is already * configured and available since this code loads the main U-Boot image @@ -37,10 +66,15 @@ void spl_spi_load_image(void) /* use CONFIG_SYS_TEXT_BASE as temporary storage area */ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); - /* Load u-boot, mkimage header is 64 bytes. */ - spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40, - (void *)header); - spl_parse_image_header(header); - spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, - spl_image.size, (void *)spl_image.load_addr); +#ifdef CONFIG_SPL_OS_BOOT + if (spl_start_uboot() || spi_load_image_os(flash, header)) +#endif + { + /* Load u-boot, mkimage header is 64 bytes. */ + spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40, + (void *)header); + spl_parse_image_header(header); + spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, + spl_image.size, (void *)spl_image.load_addr); + } } diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c25b3c9..6005f7e 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -29,6 +29,8 @@ obj-$(CONFIG_FTGMAC100) += ftgmac100.o obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_GRETH) += greth.o +obj-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o +obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_LAN91C96) += lan91c96.o diff --git a/drivers/net/designware.c b/drivers/net/designware.c index c45593b..78751b2 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -390,6 +390,8 @@ static int dw_phy_init(struct eth_device *dev) if (!phydev) return -1; + phy_connect_dev(phydev, dev); + phydev->supported &= PHY_GBIT_FEATURES; phydev->advertising = phydev->supported; diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index b68d808..4de9d41 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -345,7 +345,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) if (!is_valid_ether_addr(dev->enetaddr)) { #ifdef CONFIG_RANDOM_MACADDR printf("Bad MAC address (uninitialized EEPROM?), randomizing\n"); - eth_random_enetaddr(dev->enetaddr); + eth_random_addr(dev->enetaddr); printf("MAC: %pM\n", dev->enetaddr); #else printf("WARNING: Bad MAC address (uninitialized EEPROM?)\n"); diff --git a/drivers/net/ftmac110.c b/drivers/net/ftmac110.c index 8eee272..98c4f09 100644 --- a/drivers/net/ftmac110.c +++ b/drivers/net/ftmac110.c @@ -425,7 +425,7 @@ int ftmac110_initialize(bd_t *bis) dev->recv = ftmac110_recv; if (!eth_getenv_enetaddr_by_index("eth", card_nr, dev->enetaddr)) - eth_random_enetaddr(dev->enetaddr); + eth_random_addr(dev->enetaddr); /* allocate tx descriptors (it must be 16 bytes aligned) */ chip->txd = dma_alloc_coherent( diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c new file mode 100644 index 0000000..f95c928 --- /dev/null +++ b/drivers/net/keystone_net.c @@ -0,0 +1,716 @@ +/* + * Ethernet driver for TI K2HK EVM. + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <command.h> + +#include <net.h> +#include <miiphy.h> +#include <malloc.h> +#include <asm/arch/emac_defs.h> +#include <asm/arch/psc_defs.h> +#include <asm/arch/keystone_nav.h> + +unsigned int emac_dbg; + +unsigned int emac_open; +static unsigned int sys_has_mdio = 1; + +#ifdef KEYSTONE2_EMAC_GIG_ENABLE +#define emac_gigabit_enable(x) keystone2_eth_gigabit_enable(x) +#else +#define emac_gigabit_enable(x) /* no gigabit to enable */ +#endif + +#define RX_BUFF_NUMS 24 +#define RX_BUFF_LEN 1520 +#define MAX_SIZE_STREAM_BUFFER RX_BUFF_LEN + +static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16); + +struct rx_buff_desc net_rx_buffs = { + .buff_ptr = rx_buffs, + .num_buffs = RX_BUFF_NUMS, + .buff_len = RX_BUFF_LEN, + .rx_flow = 22, +}; + +static void keystone2_eth_mdio_enable(void); + +static int gen_get_link_speed(int phy_addr); + +/* EMAC Addresses */ +static volatile struct emac_regs *adap_emac = + (struct emac_regs *)EMAC_EMACSL_BASE_ADDR; +static volatile struct mdio_regs *adap_mdio = + (struct mdio_regs *)EMAC_MDIO_BASE_ADDR; + +int keystone2_eth_read_mac_addr(struct eth_device *dev) +{ + struct eth_priv_t *eth_priv; + u32 maca = 0; + u32 macb = 0; + + eth_priv = (struct eth_priv_t *)dev->priv; + + /* Read the e-fuse mac address */ + if (eth_priv->slave_port == 1) { + maca = __raw_readl(MAC_ID_BASE_ADDR); + macb = __raw_readl(MAC_ID_BASE_ADDR + 4); + } + + dev->enetaddr[0] = (macb >> 8) & 0xff; + dev->enetaddr[1] = (macb >> 0) & 0xff; + dev->enetaddr[2] = (maca >> 24) & 0xff; + dev->enetaddr[3] = (maca >> 16) & 0xff; + dev->enetaddr[4] = (maca >> 8) & 0xff; + dev->enetaddr[5] = (maca >> 0) & 0xff; + + return 0; +} + +static void keystone2_eth_mdio_enable(void) +{ + u_int32_t clkdiv; + + clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; + + writel((clkdiv & 0xffff) | + MDIO_CONTROL_ENABLE | + MDIO_CONTROL_FAULT | + MDIO_CONTROL_FAULT_ENABLE, + &adap_mdio->control); + + while (readl(&adap_mdio->control) & MDIO_CONTROL_IDLE) + ; +} + +/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */ +int keystone2_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) +{ + int tmp; + + while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO) + ; + + writel(MDIO_USERACCESS0_GO | + MDIO_USERACCESS0_WRITE_READ | + ((reg_num & 0x1f) << 21) | + ((phy_addr & 0x1f) << 16), + &adap_mdio->useraccess0); + + /* Wait for command to complete */ + while ((tmp = readl(&adap_mdio->useraccess0)) & MDIO_USERACCESS0_GO) + ; + + if (tmp & MDIO_USERACCESS0_ACK) { + *data = tmp & 0xffff; + return 0; + } + + *data = -1; + return -1; +} + +/* + * Write to a PHY register via MDIO inteface. + * Blocks until operation is complete. + */ +int keystone2_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) +{ + while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO) + ; + + writel(MDIO_USERACCESS0_GO | + MDIO_USERACCESS0_WRITE_WRITE | + ((reg_num & 0x1f) << 21) | + ((phy_addr & 0x1f) << 16) | + (data & 0xffff), + &adap_mdio->useraccess0); + + /* Wait for command to complete */ + while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO) + ; + + return 0; +} + +/* PHY functions for a generic PHY */ +static int gen_get_link_speed(int phy_addr) +{ + u_int16_t tmp; + + if ((!keystone2_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp)) && + (tmp & 0x04)) { + return 0; + } + + return -1; +} + +static void __attribute__((unused)) + keystone2_eth_gigabit_enable(struct eth_device *dev) +{ + u_int16_t data; + struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; + + if (sys_has_mdio) { + if (keystone2_eth_phy_read(eth_priv->phy_addr, 0, &data) || + !(data & (1 << 6))) /* speed selection MSB */ + return; + } + + /* + * Check if link detected is giga-bit + * If Gigabit mode detected, enable gigbit in MAC + */ + writel(readl(&(adap_emac[eth_priv->slave_port - 1].maccontrol)) | + EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE, + &(adap_emac[eth_priv->slave_port - 1].maccontrol)) + ; +} + +int keystone_sgmii_link_status(int port) +{ + u32 status = 0; + + status = __raw_readl(SGMII_STATUS_REG(port)); + + return status & SGMII_REG_STATUS_LINK; +} + + +int keystone_get_link_status(struct eth_device *dev) +{ + struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; + int sgmii_link; + int link_state = 0; +#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1 + int j; + + for (j = 0; (j < CONFIG_GET_LINK_STATUS_ATTEMPTS) && (link_state == 0); + j++) { +#endif + sgmii_link = + keystone_sgmii_link_status(eth_priv->slave_port - 1); + + if (sgmii_link) { + link_state = 1; + + if (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) + if (gen_get_link_speed(eth_priv->phy_addr)) + link_state = 0; + } +#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1 + } +#endif + return link_state; +} + +int keystone_sgmii_config(int port, int interface) +{ + unsigned int i, status, mask; + unsigned int mr_adv_ability, control; + + switch (interface) { + case SGMII_LINK_MAC_MAC_AUTONEG: + mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE | + SGMII_REG_MR_ADV_LINK | + SGMII_REG_MR_ADV_FULL_DUPLEX | + SGMII_REG_MR_ADV_GIG_MODE); + control = (SGMII_REG_CONTROL_MASTER | + SGMII_REG_CONTROL_AUTONEG); + + break; + case SGMII_LINK_MAC_PHY: + case SGMII_LINK_MAC_PHY_FORCED: + mr_adv_ability = SGMII_REG_MR_ADV_ENABLE; + control = SGMII_REG_CONTROL_AUTONEG; + + break; + case SGMII_LINK_MAC_MAC_FORCED: + mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE | + SGMII_REG_MR_ADV_LINK | + SGMII_REG_MR_ADV_FULL_DUPLEX | + SGMII_REG_MR_ADV_GIG_MODE); + control = SGMII_REG_CONTROL_MASTER; + + break; + case SGMII_LINK_MAC_FIBER: + mr_adv_ability = 0x20; + control = SGMII_REG_CONTROL_AUTONEG; + + break; + default: + mr_adv_ability = SGMII_REG_MR_ADV_ENABLE; + control = SGMII_REG_CONTROL_AUTONEG; + } + + __raw_writel(0, SGMII_CTL_REG(port)); + + /* + * Wait for the SerDes pll to lock, + * but don't trap if lock is never read + */ + for (i = 0; i < 1000; i++) { + udelay(2000); + status = __raw_readl(SGMII_STATUS_REG(port)); + if ((status & SGMII_REG_STATUS_LOCK) != 0) + break; + } + + __raw_writel(mr_adv_ability, SGMII_MRADV_REG(port)); + __raw_writel(control, SGMII_CTL_REG(port)); + + + mask = SGMII_REG_STATUS_LINK; + + if (control & SGMII_REG_CONTROL_AUTONEG) + mask |= SGMII_REG_STATUS_AUTONEG; + + for (i = 0; i < 1000; i++) { + status = __raw_readl(SGMII_STATUS_REG(port)); + if ((status & mask) == mask) + break; + } + + return 0; +} + +int mac_sl_reset(u32 port) +{ + u32 i, v; + + if (port >= DEVICE_N_GMACSL_PORTS) + return GMACSL_RET_INVALID_PORT; + + /* Set the soft reset bit */ + DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + + CPGMACSL_REG_RESET, CPGMAC_REG_RESET_VAL_RESET); + + /* Wait for the bit to clear */ + for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) { + v = DEVICE_REG32_R(DEVICE_EMACSL_BASE(port) + + CPGMACSL_REG_RESET); + if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) != + CPGMAC_REG_RESET_VAL_RESET) + return GMACSL_RET_OK; + } + + /* Timeout on the reset */ + return GMACSL_RET_WARN_RESET_INCOMPLETE; +} + +int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) +{ + u32 v, i; + int ret = GMACSL_RET_OK; + + if (port >= DEVICE_N_GMACSL_PORTS) + return GMACSL_RET_INVALID_PORT; + + if (cfg->max_rx_len > CPGMAC_REG_MAXLEN_LEN) { + cfg->max_rx_len = CPGMAC_REG_MAXLEN_LEN; + ret = GMACSL_RET_WARN_MAXLEN_TOO_BIG; + } + + /* Must wait if the device is undergoing reset */ + for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) { + v = DEVICE_REG32_R(DEVICE_EMACSL_BASE(port) + + CPGMACSL_REG_RESET); + if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) != + CPGMAC_REG_RESET_VAL_RESET) + break; + } + + if (i == DEVICE_EMACSL_RESET_POLL_COUNT) + return GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE; + + DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN, + cfg->max_rx_len); + + DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL, + cfg->ctl); + + return ret; +} + +int ethss_config(u32 ctl, u32 max_pkt_size) +{ + u32 i; + + /* Max length register */ + DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_MAXLEN, max_pkt_size); + + /* Control register */ + DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_CTL, ctl); + + /* All statistics enabled by default */ + DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_STAT_PORT_EN, + CPSW_REG_VAL_STAT_ENABLE_ALL); + + /* Reset and enable the ALE */ + DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_ALE_CONTROL, + CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE | + CPSW_REG_VAL_ALE_CTL_BYPASS); + + /* All ports put into forward mode */ + for (i = 0; i < DEVICE_CPSW_NUM_PORTS; i++) + DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_ALE_PORTCTL(i), + CPSW_REG_VAL_PORTCTL_FORWARD_MODE); + + return 0; +} + +int ethss_start(void) +{ + int i; + struct mac_sl_cfg cfg; + + cfg.max_rx_len = MAX_SIZE_STREAM_BUFFER; + cfg.ctl = GMACSL_ENABLE | GMACSL_RX_ENABLE_EXT_CTL; + + for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++) { + mac_sl_reset(i); + mac_sl_config(i, &cfg); + } + + return 0; +} + +int ethss_stop(void) +{ + int i; + + for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++) + mac_sl_reset(i); + + return 0; +} + +int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num) +{ + if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE) + num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE; + + return netcp_send(buffer, num_bytes, (slave_port_num) << 16); +} + +/* Eth device open */ +static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) +{ + u_int32_t clkdiv; + int link; + struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; + + debug("+ emac_open\n"); + + net_rx_buffs.rx_flow = eth_priv->rx_flow; + + sys_has_mdio = + (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0; + + psc_enable_module(KS2_LPSC_PA); + psc_enable_module(KS2_LPSC_CPGMAC); + + sgmii_serdes_setup_156p25mhz(); + + if (sys_has_mdio) + keystone2_eth_mdio_enable(); + + keystone_sgmii_config(eth_priv->slave_port - 1, + eth_priv->sgmii_link_type); + + udelay(10000); + + /* On chip switch configuration */ + ethss_config(target_get_switch_ctl(), SWITCH_MAX_PKT_SIZE); + + /* TODO: add error handling code */ + if (qm_init()) { + printf("ERROR: qm_init()\n"); + return -1; + } + if (netcp_init(&net_rx_buffs)) { + qm_close(); + printf("ERROR: netcp_init()\n"); + return -1; + } + + /* + * Streaming switch configuration. If not present this + * statement is defined to void in target.h. + * If present this is usually defined to a series of register writes + */ + hw_config_streaming_switch(); + + if (sys_has_mdio) { + /* Init MDIO & get link state */ + clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; + writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | + MDIO_CONTROL_FAULT, &adap_mdio->control) + ; + + /* We need to wait for MDIO to start */ + udelay(1000); + + link = keystone_get_link_status(dev); + if (link == 0) { + netcp_close(); + qm_close(); + return -1; + } + } + + emac_gigabit_enable(dev); + + ethss_start(); + + debug("- emac_open\n"); + + emac_open = 1; + + return 0; +} + +/* Eth device close */ +void keystone2_eth_close(struct eth_device *dev) +{ + debug("+ emac_close\n"); + + if (!emac_open) + return; + + ethss_stop(); + + netcp_close(); + qm_close(); + + emac_open = 0; + + debug("- emac_close\n"); +} + +static int tx_send_loop; + +/* + * This function sends a single packet on the network and returns + * positive number (number of bytes transmitted) or negative for error + */ +static int keystone2_eth_send_packet(struct eth_device *dev, + void *packet, int length) +{ + int ret_status = -1; + struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; + + tx_send_loop = 0; + + if (keystone_get_link_status(dev) == 0) + return -1; + + emac_gigabit_enable(dev); + + if (cpmac_drv_send((u32 *)packet, length, eth_priv->slave_port) != 0) + return ret_status; + + if (keystone_get_link_status(dev) == 0) + return -1; + + emac_gigabit_enable(dev); + + return length; +} + +/* + * This function handles receipt of a packet from the network + */ +static int keystone2_eth_rcv_packet(struct eth_device *dev) +{ + void *hd; + int pkt_size; + u32 *pkt; + + hd = netcp_recv(&pkt, &pkt_size); + if (hd == NULL) + return 0; + + NetReceive((uchar *)pkt, pkt_size); + + netcp_release_rxhd(hd); + + return pkt_size; +} + +/* + * This function initializes the EMAC hardware. + */ +int keystone2_emac_initialize(struct eth_priv_t *eth_priv) +{ + struct eth_device *dev; + + dev = malloc(sizeof(struct eth_device)); + if (dev == NULL) + return -1; + + memset(dev, 0, sizeof(struct eth_device)); + + strcpy(dev->name, eth_priv->int_name); + dev->priv = eth_priv; + + keystone2_eth_read_mac_addr(dev); + + dev->iobase = 0; + dev->init = keystone2_eth_open; + dev->halt = keystone2_eth_close; + dev->send = keystone2_eth_send_packet; + dev->recv = keystone2_eth_rcv_packet; + + eth_register(dev); + + return 0; +} + +void sgmii_serdes_setup_156p25mhz(void) +{ + unsigned int cnt; + + /* + * configure Serializer/Deserializer (SerDes) hardware. SerDes IP + * hardware vendor published only register addresses and their values + * to be used for configuring SerDes. So had to use hardcoded values + * below. + */ + clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000); + clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282); + clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438); + clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700); + clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000); + + clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080); + clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000); + clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000); + clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000); + clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8); + clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4); + clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400); + clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800); + clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082); + clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385); + + clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080); + clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000); + clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000); + clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000); + clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8); + clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4); + clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400); + clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800); + clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082); + clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385); + + clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080); + clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000); + clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000); + clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000); + clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8); + clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4); + clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400); + clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800); + clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082); + clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385); + + clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080); + clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000); + clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000); + clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000); + clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8); + clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4); + clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400); + clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800); + clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082); + clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385); + + clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800); + clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000); + clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00); + clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600); + clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000); + clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000); + clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000); + clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b); + clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000); + clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e); + clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003); + clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f); + + clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00); + clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72); + clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100); + clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060); + clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000); + clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220); + clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602); + clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1); + clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989); + clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001); + clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000); + clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000); + clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d); + + /*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/ + clrbits_le32(0x0232a010, 1 << 28); + + /* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */ + clrbits_le32(0x0232a228, 1 << 29); + writel(0xF800F8C0, 0x0232bfe0); + clrbits_le32(0x0232a428, 1 << 29); + writel(0xF800F8C0, 0x0232bfe4); + clrbits_le32(0x0232a628, 1 << 29); + writel(0xF800F8C0, 0x0232bfe8); + clrbits_le32(0x0232a828, 1 << 29); + writel(0xF800F8C0, 0x0232bfec); + + /*Enable pll via the pll_ctrl 0x0014*/ + writel(0xe0000000, 0x0232bff4) + ; + + /*Waiting for SGMII Serdes PLL lock.*/ + for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--) + ; + + for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--) + ; + + for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--) + ; + + for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--) + ; + + udelay(45000); +} + +void sgmii_serdes_shutdown(void) +{ + /* + * shutdown SerDes hardware. SerDes hardware vendor published only + * register addresses and their values. So had to use hardcoded + * values below. + */ + clrbits_le32(0x0232bfe0, 3 << 29 | 3 << 13); + setbits_le32(0x02320228, 1 << 29); + clrbits_le32(0x0232bfe4, 3 << 29 | 3 << 13); + setbits_le32(0x02320428, 1 << 29); + clrbits_le32(0x0232bfe8, 3 << 29 | 3 << 13); + setbits_le32(0x02320628, 1 << 29); + clrbits_le32(0x0232bfec, 3 << 29 | 3 << 13); + setbits_le32(0x02320828, 1 << 29); + + clrbits_le32(0x02320034, 3 << 29); + setbits_le32(0x02320010, 1 << 28); +} diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index abd4e5b..d509e30 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -31,9 +31,7 @@ static int ar8035_config(struct phy_device *phydev) regval = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, (regval|0x0100)); - genphy_config_aneg(phydev); - - phy_reset(phydev); + phydev->supported = phydev->drv->features; return 0; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c691fbb..230ed97 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -18,6 +18,7 @@ #include <phy.h> #include <errno.h> #include <linux/err.h> +#include <linux/compiler.h> /* Generic PHY support and helper functions */ @@ -577,7 +578,7 @@ static struct phy_device *phy_device_create(struct mii_dev *bus, int addr, * Description: Reads the ID registers of the PHY at @addr on the * @bus, stores it in @phy_id and returns zero on success. */ -static int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) +int __weak get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) { int phy_reg; diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 101489c..3cadd23 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -11,6 +11,7 @@ #include <common.h> #include <net.h> +#include <netdev.h> #include <config.h> #include <fdtdec.h> #include <libfdt.h> @@ -338,7 +339,8 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) phy_detection(dev); /* interface - look at tsec */ - phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0); + phydev = phy_connect(priv->bus, priv->phyaddr, dev, + PHY_INTERFACE_MODE_MII); phydev->supported = supported | ADVERTISED_Pause | ADVERTISED_Asym_Pause; diff --git a/drivers/power/tps6586x.c b/drivers/power/tps6586x.c index 704c243..d29d969 100644 --- a/drivers/power/tps6586x.c +++ b/drivers/power/tps6586x.c @@ -32,7 +32,7 @@ enum { }; #define MAX_I2C_RETRY 3 -int tps6586x_read(int reg) +static int tps6586x_read(int reg) { int i; uchar data; @@ -61,7 +61,7 @@ exit: return retval; } -int tps6586x_write(int reg, uchar *data, uint len) +static int tps6586x_write(int reg, uchar *data, uint len) { int i; int retval = -1; diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index fbc37b2..f26979d 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -30,6 +30,17 @@ #define serial_in(y) readb(y) #endif +#if defined(CONFIG_K2HK_EVM) +#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 +#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) +#undef UART_MCRVAL +#ifdef CONFIG_SERIAL_HW_FLOW_CONTROL +#define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE) +#else +#define UART_MCRVAL (UART_MCR_RTS) +#endif +#endif + #ifndef CONFIG_SYS_NS16550_IER #define CONFIG_SYS_NS16550_IER 0x00 #endif /* CONFIG_SYS_NS16550_IER */ @@ -77,6 +88,9 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) /* /16 is proper to hit 115200 with 48MHz */ serial_out(0, &com_port->mdr1); #endif /* CONFIG_OMAP */ +#if defined(CONFIG_K2HK_EVM) + serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); +#endif } #ifndef CONFIG_NS16550_MIN_FUNCTIONS diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index df05bde..fd61a5e 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -74,9 +74,6 @@ static int on_baudrate(const char *name, const char *value, enum env_op op, } gd->baudrate = baudrate; -#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2) - gd->bd->bi_baudrate = baudrate; -#endif serial_setbrg(); @@ -117,7 +114,7 @@ serial_initfunc(ns16550_serial_initialize); serial_initfunc(pxa_serial_initialize); serial_initfunc(s3c24xx_serial_initialize); serial_initfunc(s5p_serial_initialize); -serial_initfunc(zynq_serial_initalize); +serial_initfunc(zynq_serial_initialize); serial_initfunc(bfin_serial_initialize); serial_initfunc(bfin_jtag_initialize); serial_initfunc(mpc512x_serial_initialize); @@ -214,7 +211,7 @@ void serial_initialize(void) bfin_serial_initialize(); bfin_jtag_initialize(); uartlite_serial_initialize(); - zynq_serial_initalize(); + zynq_serial_initialize(); au1x00_serial_initialize(); asc_serial_initialize(); jz_serial_initialize(); @@ -502,12 +499,11 @@ int uart_post_test(int flags) unsigned char c; int ret, saved_baud, b; struct serial_device *saved_dev, *s; - bd_t *bd = gd->bd; /* Save current serial state */ ret = 0; saved_dev = serial_current; - saved_baud = bd->bi_baudrate; + saved_baud = gd->baudrate; for (s = serial_devices; s; s = s->next) { /* If this driver doesn't support loop back, skip it */ @@ -530,7 +526,7 @@ int uart_post_test(int flags) /* Test every available baud rate */ for (b = 0; b < ARRAY_SIZE(bauds); ++b) { - bd->bi_baudrate = bauds[b]; + gd->baudrate = bauds[b]; serial_setbrg(); /* @@ -572,7 +568,7 @@ int uart_post_test(int flags) done: /* Restore previous serial state */ serial_current = saved_dev; - bd->bi_baudrate = saved_baud; + gd->baudrate = saved_baud; serial_reinit_all(); serial_setbrg(); diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 53a8af0..1ff27d5 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -153,17 +153,17 @@ static int uart_zynq_serial_getc(const int port) /* Multi serial device functions */ #define DECLARE_PSSERIAL_FUNCTIONS(port) \ - int uart_zynq##port##_init(void) \ + static int uart_zynq##port##_init(void) \ { return uart_zynq_serial_init(port); } \ - void uart_zynq##port##_setbrg(void) \ + static void uart_zynq##port##_setbrg(void) \ { return uart_zynq_serial_setbrg(port); } \ - int uart_zynq##port##_getc(void) \ + static int uart_zynq##port##_getc(void) \ { return uart_zynq_serial_getc(port); } \ - int uart_zynq##port##_tstc(void) \ + static int uart_zynq##port##_tstc(void) \ { return uart_zynq_serial_tstc(port); } \ - void uart_zynq##port##_putc(const char c) \ + static void uart_zynq##port##_putc(const char c) \ { uart_zynq_serial_putc(c, port); } \ - void uart_zynq##port##_puts(const char *s) \ + static void uart_zynq##port##_puts(const char *s) \ { uart_zynq_serial_puts(s, port); } /* Serial device descriptor */ @@ -179,10 +179,10 @@ static int uart_zynq_serial_getc(const int port) } DECLARE_PSSERIAL_FUNCTIONS(0); -struct serial_device uart_zynq_serial0_device = +static struct serial_device uart_zynq_serial0_device = INIT_PSSERIAL_STRUCTURE(0, "ttyPS0"); DECLARE_PSSERIAL_FUNCTIONS(1); -struct serial_device uart_zynq_serial1_device = +static struct serial_device uart_zynq_serial1_device = INIT_PSSERIAL_STRUCTURE(1, "ttyPS1"); #ifdef CONFIG_OF_CONTROL @@ -223,7 +223,7 @@ __weak struct serial_device *default_serial_console(void) } #endif -void zynq_serial_initalize(void) +void zynq_serial_initialize(void) { serial_register(&uart_zynq_serial0_device); serial_register(&uart_zynq_serial1_device); diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index e3fb321..28fb3a2 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -32,7 +32,27 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!ds) return NULL; - ds->regs = (struct davinci_spi_regs *)CONFIG_SYS_SPI_BASE; + ds->slave.bus = bus; + ds->slave.cs = cs; + + switch (bus) { + case SPI0_BUS: + ds->regs = (struct davinci_spi_regs *)SPI0_BASE; + break; +#ifdef CONFIG_SYS_SPI1 + case SPI1_BUS: + ds->regs = (struct davinci_spi_regs *)SPI0_BASE; + break; +#endif +#ifdef CONFIG_SYS_SPI2 + case SPI2_BUS: + ds->regs = (struct davinci_spi_regs *)SPI2_BASE; + break; +#endif + default: /* Invalid bus number */ + return NULL; + } + ds->freq = max_hz; return &ds->slave; @@ -59,7 +79,7 @@ int spi_claim_bus(struct spi_slave *slave) writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1); /* CS, CLK, SIMO and SOMI are functional pins */ - writel((SPIPC0_EN0FUN_MASK | SPIPC0_CLKFUN_MASK | + writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0); /* setup format */ @@ -264,7 +284,30 @@ out: int spi_cs_is_valid(unsigned int bus, unsigned int cs) { - return bus == 0 && cs == 0; + int ret = 0; + + switch (bus) { + case SPI0_BUS: + if (cs < SPI0_NUM_CS) + ret = 1; + break; +#ifdef CONFIG_SYS_SPI1 + case SPI1_BUS: + if (cs < SPI1_NUM_CS) + ret = 1; + break; +#endif +#ifdef CONFIG_SYS_SPI2 + case SPI2_BUS: + if (cs < SPI2_NUM_CS) + ret = 1; + break; +#endif + default: + /* Invalid bus number. Do nothing */ + break; + } + return ret; } void spi_cs_activate(struct spi_slave *slave) diff --git a/drivers/spi/davinci_spi.h b/drivers/spi/davinci_spi.h index 33f69b5..d4612d3 100644 --- a/drivers/spi/davinci_spi.h +++ b/drivers/spi/davinci_spi.h @@ -74,6 +74,39 @@ struct davinci_spi_regs { /* SPIDEF */ #define SPIDEF_CSDEF0_MASK BIT(0) +#define SPI0_BUS 0 +#define SPI0_BASE CONFIG_SYS_SPI_BASE +/* + * Define default SPI0_NUM_CS as 1 for existing platforms that uses this + * driver. Platform can configure number of CS using CONFIG_SYS_SPI0_NUM_CS + * if more than one CS is supported and by defining CONFIG_SYS_SPI0. + */ +#ifndef CONFIG_SYS_SPI0 +#define SPI0_NUM_CS 1 +#else +#define SPI0_NUM_CS CONFIG_SYS_SPI0_NUM_CS +#endif + +/* + * define CONFIG_SYS_SPI1 when platform has spi-1 device (bus #1) and + * CONFIG_SYS_SPI1_NUM_CS defines number of CS on this bus + */ +#ifdef CONFIG_SYS_SPI1 +#define SPI1_BUS 1 +#define SPI1_NUM_CS CONFIG_SYS_SPI1_NUM_CS +#define SPI1_BASE CONFIG_SYS_SPI1_BASE +#endif + +/* + * define CONFIG_SYS_SPI2 when platform has spi-2 device (bus #2) and + * CONFIG_SYS_SPI2_NUM_CS defines number of CS on this bus + */ +#ifdef CONFIG_SYS_SPI2 +#define SPI2_BUS 2 +#define SPI2_NUM_CS CONFIG_SYS_SPI2_NUM_CS +#define SPI2_BASE CONFIG_SYS_SPI2_BASE +#endif + struct davinci_spi_slave { struct spi_slave slave; struct davinci_spi_regs *regs; diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c index 603c024..b5d561b 100644 --- a/drivers/spi/tegra20_sflash.c +++ b/drivers/spi/tegra20_sflash.c @@ -208,9 +208,9 @@ int tegra20_spi_claim_bus(struct spi_slave *slave) * SPI pins on Tegra20 are muxed - change pinmux later due to UART * issue. */ - pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH); - pinmux_tristate_disable(PINGRP_LSPI); - pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); + pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH); + pinmux_tristate_disable(PMUX_PINGRP_LSPI); + pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH); return 0; } diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index dfa5d0c..c5d2245 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -314,6 +314,9 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, qslave->cmd |= QSPI_RD_SNGL; debug("rx cmd %08x dc %08x\n", qslave->cmd, qslave->dc); + #ifdef CONFIG_DRA7XX + udelay(500); + #endif writel(qslave->cmd, &qslave->base->cmd); status = readl(&qslave->base->status); timeout = QSPI_TIMEOUT; diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 804a2bd..896c8d4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -13,6 +13,7 @@ ifdef CONFIG_USB_GADGET obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o +obj-$(CONFIG_CI_UDC) += ci_udc.o obj-$(CONFIG_THOR_FUNCTION) += f_thor.o obj-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o obj-$(CONFIG_DFU_FUNCTION) += f_dfu.o diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c index 14b1e9b..02d3fda 100644 --- a/drivers/usb/gadget/ci_udc.c +++ b/drivers/usb/gadget/ci_udc.c @@ -321,7 +321,7 @@ static void ci_debounce(struct ci_ep *ep, int in) if (addr == ba) return; /* not a bounce */ - memcpy(ep->req.buf, ep->b_buf, ep->req.length); + memcpy(ep->req.buf, ep->b_buf, ep->req.actual); free: /* Large payloads use allocated buffer, free it. */ if (ep->b_buf != ep->b_fast) @@ -350,6 +350,9 @@ static int ci_ep_queue(struct usb_ep *ep, item->info = INFO_BYTES(len) | INFO_IOC | INFO_ACTIVE; item->page0 = (uint32_t)ci_ep->b_buf; item->page1 = ((uint32_t)ci_ep->b_buf & 0xfffff000) + 0x1000; + item->page2 = ((uint32_t)ci_ep->b_buf & 0xfffff000) + 0x2000; + item->page3 = ((uint32_t)ci_ep->b_buf & 0xfffff000) + 0x3000; + item->page4 = ((uint32_t)ci_ep->b_buf & 0xfffff000) + 0x4000; ci_flush_qtd(num); head->next = (unsigned) item; @@ -385,7 +388,7 @@ static void handle_ep_complete(struct ci_ep *ep) num, in ? "in" : "out", item->info, item->page0); len = (item->info >> 16) & 0x7fff; - ep->req.length -= len; + ep->req.actual = ep->req.length - len; ci_debounce(ep, in); DBG("ept%d %s complete %x\n", @@ -413,7 +416,11 @@ static void handle_setup(void) ci_invalidate_qh(0); memcpy(&r, head->setup_data, sizeof(struct usb_ctrlrequest)); +#ifdef CONFIG_CI_UDC_HAS_HOSTPC + writel(EPT_RX(0), &udc->epsetupstat); +#else writel(EPT_RX(0), &udc->epstat); +#endif DBG("handle setup %s, %x, %x index %x value %x\n", reqname(r.bRequest), r.bRequestType, r.bRequest, r.wIndex, r.wValue); @@ -480,6 +487,9 @@ static void stop_activity(void) struct ept_queue_head *head; struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; writel(readl(&udc->epcomp), &udc->epcomp); +#ifdef CONFIG_CI_UDC_HAS_HOSTPC + writel(readl(&udc->epsetupstat), &udc->epsetupstat); +#endif writel(readl(&udc->epstat), &udc->epstat); writel(0xffffffff, &udc->epflush); @@ -521,7 +531,11 @@ void udc_irq(void) int max = 64; int speed = USB_SPEED_FULL; +#ifdef CONFIG_CI_UDC_HAS_HOSTPC + bit = (readl(&udc->hostpc1_devlc) >> 25) & 3; +#else bit = (readl(&udc->portsc) >> 26) & 3; +#endif DBG("-- portchange %x %s\n", bit, (bit == 2) ? "High" : "Full"); if (bit == 2) { speed = USB_SPEED_HIGH; @@ -538,7 +552,11 @@ void udc_irq(void) printf("<UEI %x>\n", readl(&udc->epcomp)); if ((n & STS_UI) || (n & STS_UEI)) { +#ifdef CONFIG_CI_UDC_HAS_HOSTPC + n = readl(&udc->epsetupstat); +#else n = readl(&udc->epstat); +#endif if (n & EPT_RX(0)) handle_setup(); @@ -699,7 +717,6 @@ static int ci_udc_probe(void) int usb_gadget_register_driver(struct usb_gadget_driver *driver) { - struct ci_udc *udc; int ret; if (!driver) @@ -714,12 +731,18 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) return ret; ret = ci_udc_probe(); +#if defined(CONFIG_USB_EHCI_MX6) || defined(CONFIG_USB_EHCI_MXS) + /* + * FIXME: usb_lowlevel_init()->ehci_hcd_init() should be doing all + * HW-specific initialization, e.g. ULPI-vs-UTMI PHY selection + */ if (!ret) { - udc = (struct ci_udc *)controller.ctrl->hcor; + struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; /* select ULPI phy */ writel(PTS(PTS_ENABLE) | PFSC, &udc->portsc); } +#endif ret = driver->bind(&controller.gadget); if (ret) { diff --git a/drivers/usb/gadget/ci_udc.h b/drivers/usb/gadget/ci_udc.h index 42f6ef4..4425fd9 100644 --- a/drivers/usb/gadget/ci_udc.h +++ b/drivers/usb/gadget/ci_udc.h @@ -8,45 +8,74 @@ #define NUM_ENDPOINTS 6 +#ifdef CONFIG_CI_UDC_HAS_HOSTPC +struct ci_udc { + u32 usbcmd; /* 0x130 */ + u32 usbsts; /* 0x134 */ + u32 pad1[3]; + u32 devaddr; /* 0x144 */ + u32 epinitaddr; /* 0x148 */ + u32 pad2[10]; + u32 portsc; /* 0x174 */ + u32 pad178[(0x1b4 - (0x174 + 4)) / 4]; + u32 hostpc1_devlc; /* 0x1b4 */ + u32 pad1b8[(0x1f8 - (0x1b4 + 4)) / 4]; + u32 usbmode; /* 0x1f8 */ + u32 pad1fc[(0x208 - (0x1f8 + 4)) / 4]; + u32 epsetupstat; /* 0x208 */ + u32 epprime; /* 0x20c */ + u32 epflush; /* 0x210 */ + u32 epstat; /* 0x214 */ + u32 epcomp; /* 0x218 */ + u32 epctrl[16]; /* 0x21c */ +}; +#else struct ci_udc { -#define MICRO_8FRAME 0x8 -#define USBCMD_ITC(x) ((((x) > 0xff) ? 0xff : x) << 16) -#define USBCMD_FS2 (1 << 15) -#define USBCMD_RST (1 << 1) -#define USBCMD_RUN (1) u32 usbcmd; /* 0x140 */ -#define STS_SLI (1 << 8) -#define STS_URI (1 << 6) -#define STS_PCI (1 << 2) -#define STS_UEI (1 << 1) -#define STS_UI (1 << 0) u32 usbsts; /* 0x144 */ u32 pad1[3]; u32 devaddr; /* 0x154 */ u32 epinitaddr; /* 0x158 */ u32 pad2[10]; -#define PTS_ENABLE 2 -#define PTS(x) (((x) & 0x3) << 30) -#define PFSC (1 << 24) u32 portsc; /* 0x184 */ u32 pad3[8]; -#define USBMODE_DEVICE 2 u32 usbmode; /* 0x1a8 */ u32 epstat; /* 0x1ac */ -#define EPT_TX(x) (1 << (((x) & 0xffff) + 16)) -#define EPT_RX(x) (1 << ((x) & 0xffff)) u32 epprime; /* 0x1b0 */ u32 epflush; /* 0x1b4 */ u32 pad4; u32 epcomp; /* 0x1bc */ + u32 epctrl[16]; /* 0x1c0 */ +}; + +#define PTS_ENABLE 2 +#define PTS(x) (((x) & 0x3) << 30) +#define PFSC (1 << 24) +#endif + +#define MICRO_8FRAME 0x8 +#define USBCMD_ITC(x) ((((x) > 0xff) ? 0xff : x) << 16) +#define USBCMD_FS2 (1 << 15) +#define USBCMD_RST (1 << 1) +#define USBCMD_RUN (1) + +#define STS_SLI (1 << 8) +#define STS_URI (1 << 6) +#define STS_PCI (1 << 2) +#define STS_UEI (1 << 1) +#define STS_UI (1 << 0) + +#define USBMODE_DEVICE 2 + +#define EPT_TX(x) (1 << (((x) & 0xffff) + 16)) +#define EPT_RX(x) (1 << ((x) & 0xffff)) + #define CTRL_TXE (1 << 23) #define CTRL_TXR (1 << 22) #define CTRL_RXE (1 << 7) #define CTRL_RXR (1 << 6) #define CTRL_TXT_BULK (2 << 18) #define CTRL_RXT_BULK (2 << 2) - u32 epctrl[16]; /* 0x1c0 */ -}; struct ci_ep { struct usb_ep ep; diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c index de75ff1..1b1e179 100644 --- a/drivers/usb/gadget/f_dfu.c +++ b/drivers/usb/gadget/f_dfu.c @@ -24,6 +24,7 @@ #include <linux/usb/composite.h> #include <dfu.h> +#include <g_dnl.h> #include "f_dfu.h" struct f_dfu { @@ -817,3 +818,5 @@ int dfu_add(struct usb_configuration *c) return dfu_bind_config(c); } + +DECLARE_GADGET_BIND_CALLBACK(usb_dnl_dfu, dfu_add); diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index f896169..6374bb9 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -243,7 +243,7 @@ #include <config.h> #include <malloc.h> #include <common.h> -#include <usb.h> +#include <g_dnl.h> #include <linux/err.h> #include <linux/usb/ch9.h> @@ -255,6 +255,7 @@ #include <linux/usb/gadget.h> #include <linux/usb/composite.h> #include <usb/lin_gadget_compat.h> +#include <g_dnl.h> /*------------------------------------------------------------------------*/ @@ -680,11 +681,11 @@ static int sleep_thread(struct fsg_common *common) /* Handle CTRL+C */ if (ctrlc()) return -EPIPE; -#ifdef CONFIG_USB_CABLE_CHECK + /* Check cable connection */ - if (!usb_cable_connected()) + if (!g_dnl_board_usb_cable_connected()) return -EIO; -#endif + k = 0; } @@ -2778,3 +2779,5 @@ int fsg_init(struct ums *ums_dev) return 0; } + +DECLARE_GADGET_BIND_CALLBACK(usb_dnl_ums, fsg_add); diff --git a/drivers/usb/gadget/f_thor.c b/drivers/usb/gadget/f_thor.c index f5c0224..feef9e4 100644 --- a/drivers/usb/gadget/f_thor.c +++ b/drivers/usb/gadget/f_thor.c @@ -204,14 +204,14 @@ static long long int download_head(unsigned long long total, static int download_tail(long long int left, int cnt) { + struct dfu_entity *dfu_entity = dfu_get_entity(alt_setting_num); void *transfer_buffer = dfu_get_buf(); int ret; debug("%s: left: %llu cnt: %d\n", __func__, left, cnt); if (left) { - ret = dfu_write(dfu_get_entity(alt_setting_num), - transfer_buffer, left, cnt++); + ret = dfu_write(dfu_entity, transfer_buffer, left, cnt++); if (ret) { error("DFU write failed [%d]: left: %llu", ret, left); return ret; @@ -225,11 +225,16 @@ static int download_tail(long long int left, int cnt) * This also frees memory malloc'ed by dfu_get_buf(), so no explicit * need fo call dfu_free_buf() is needed. */ - ret = dfu_write(dfu_get_entity(alt_setting_num), - transfer_buffer, 0, cnt); + ret = dfu_write(dfu_entity, transfer_buffer, 0, cnt); if (ret) error("DFU write failed [%d] cnt: %d", ret, cnt); + ret = dfu_flush(dfu_entity, transfer_buffer, 0, cnt); + if (ret) { + error("DFU flush failed!"); + return ret; + } + return ret; } @@ -999,3 +1004,5 @@ int thor_add(struct usb_configuration *c) debug("%s:\n", __func__); return thor_func_init(c); } + +DECLARE_GADGET_BIND_CALLBACK(usb_dnl_thor, thor_add); diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index dd95afe..25611ac 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -41,7 +41,6 @@ #define DRIVER_VERSION "usb_dnl 2.0" -static const char shortname[] = "usb_dnl_"; static const char product[] = "USB download gadget"; static char g_dnl_serial[MAX_STRING_SERIAL]; static const char manufacturer[] = CONFIG_G_DNL_MANUFACTURER; @@ -96,29 +95,36 @@ static int g_dnl_unbind(struct usb_composite_dev *cdev) free(cdev->config); cdev->config = NULL; debug("%s: calling usb_gadget_disconnect for " - "controller '%s'\n", shortname, gadget->name); + "controller '%s'\n", __func__, gadget->name); usb_gadget_disconnect(gadget); return 0; } +static inline struct g_dnl_bind_callback *g_dnl_bind_callback_first(void) +{ + return ll_entry_start(struct g_dnl_bind_callback, + g_dnl_bind_callbacks); +} + +static inline struct g_dnl_bind_callback *g_dnl_bind_callback_end(void) +{ + return ll_entry_end(struct g_dnl_bind_callback, + g_dnl_bind_callbacks); +} + static int g_dnl_do_config(struct usb_configuration *c) { const char *s = c->cdev->driver->name; - int ret = -1; + struct g_dnl_bind_callback *callback = g_dnl_bind_callback_first(); debug("%s: configuration: 0x%p composite dev: 0x%p\n", __func__, c, c->cdev); - printf("GADGET DRIVER: %s\n", s); - if (!strcmp(s, "usb_dnl_dfu")) - ret = dfu_add(c); - else if (!strcmp(s, "usb_dnl_ums")) - ret = fsg_add(c); - else if (!strcmp(s, "usb_dnl_thor")) - ret = thor_add(c); - - return ret; + for (; callback != g_dnl_bind_callback_end(); callback++) + if (!strcmp(s, callback->usb_function_name)) + return callback->fptr(c); + return -ENODEV; } static int g_dnl_config_register(struct usb_composite_dev *cdev) @@ -152,6 +158,11 @@ __weak int g_dnl_get_board_bcd_device_number(int gcnum) return gcnum; } +__weak int g_dnl_board_usb_cable_connected(void) +{ + return -EOPNOTSUPP; +} + static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; @@ -203,12 +214,12 @@ static int g_dnl_bind(struct usb_composite_dev *cdev) device_desc.bcdDevice = cpu_to_le16(gcnum); else { debug("%s: controller '%s' not recognized\n", - shortname, gadget->name); + __func__, gadget->name); device_desc.bcdDevice = __constant_cpu_to_le16(0x9999); } debug("%s: calling usb_gadget_connect for " - "controller '%s'\n", shortname, gadget->name); + "controller '%s'\n", __func__, gadget->name); usb_gadget_connect(gadget); return 0; @@ -227,36 +238,23 @@ static struct usb_composite_driver g_dnl_driver = { .unbind = g_dnl_unbind, }; -int g_dnl_register(const char *type) +/* + * NOTICE: + * Registering via USB function name won't be necessary after rewriting + * g_dnl to support multiple USB functions. + */ +int g_dnl_register(const char *name) { - /* The largest function name is 4 */ - static char name[sizeof(shortname) + 4]; int ret; - if (!strcmp(type, "dfu")) { - strcpy(name, shortname); - strcat(name, type); - } else if (!strcmp(type, "ums")) { - strcpy(name, shortname); - strcat(name, type); - } else if (!strcmp(type, "thor")) { - strcpy(name, shortname); - strcat(name, type); - } else { - printf("%s: unknown command: %s\n", __func__, type); - return -EINVAL; - } - + debug("%s: g_dnl_driver.name = %s\n", __func__, name); g_dnl_driver.name = name; - debug("%s: g_dnl_driver.name: %s\n", __func__, g_dnl_driver.name); ret = usb_composite_register(&g_dnl_driver); - if (ret) { printf("%s: failed!, error: %d\n", __func__, ret); return ret; } - return 0; } diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index 02803df..7430074 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -311,7 +311,11 @@ static struct fsg_lun *fsg_lun_from_dev(struct device *dev) #define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ /* Number of buffers we will use. 2 is enough for double-buffering */ +#ifndef CONFIG_CI_UDC #define FSG_NUM_BUFFERS 2 +#else +#define FSG_NUM_BUFFERS 1 /* ci_udc only allows 1 req per ep at present */ +#endif /* Default size of buffer length. */ #define FSG_BUFLEN ((u32)16384) diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index de5fa3f..8c3ff64 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -108,6 +108,9 @@ usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf) struct usb_string *s; int len; + if (!table) + return -EINVAL; + /* descriptor 0 has the language id */ if (id == 0) { buf[0] = 4; diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 578b097..b301e28 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o +obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o # xhci obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 9356878..edd91a8 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -197,7 +197,8 @@ int ehci_hcd_init(int index, enum usb_init_type init, #ifdef CONFIG_OF_CONTROL /* setup the Vbus gpio here */ - if (!fdtdec_setup_gpio(&ctx->vbus_gpio)) + if (fdt_gpio_isvalid(&ctx->vbus_gpio) && + !fdtdec_setup_gpio(&ctx->vbus_gpio)) gpio_direction_output(ctx->vbus_gpio.gpio, 1); #endif diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6017090..eaf5913 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -998,8 +998,8 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) if (!ehcic[index].periodic_list) return -ENOMEM; for (i = 0; i < 1024; i++) { - ehcic[index].periodic_list[i] = (uint32_t)periodic - | QH_LINK_TYPE_QH; + ehcic[index].periodic_list[i] = cpu_to_hc32((uint32_t)periodic + | QH_LINK_TYPE_QH); } flush_dcache_range((uint32_t)ehcic[index].periodic_list, @@ -1089,7 +1089,7 @@ struct int_queue { struct qTD *tds; }; -#define NEXT_QH(qh) (struct QH *)((qh)->qh_link & ~0x1f) +#define NEXT_QH(qh) (struct QH *)(hc32_to_cpu((qh)->qh_link) & ~0x1f) static int enable_periodic(struct ehci_ctrl *ctrl) @@ -1184,41 +1184,47 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, struct qTD *td = result->tds + i; void **buf = &qh->buffer; - qh->qh_link = (uint32_t)(qh+1) | QH_LINK_TYPE_QH; + qh->qh_link = cpu_to_hc32((uint32_t)(qh+1) | QH_LINK_TYPE_QH); if (i == queuesize - 1) - qh->qh_link = QH_LINK_TERMINATE; + qh->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); - qh->qh_overlay.qt_next = (uint32_t)td; - qh->qh_overlay.qt_altnext = QT_NEXT_TERMINATE; - qh->qh_endpt1 = (0 << 28) | /* No NAK reload (ehci 4.9) */ + qh->qh_overlay.qt_next = cpu_to_hc32((uint32_t)td); + qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); + qh->qh_endpt1 = + cpu_to_hc32((0 << 28) | /* No NAK reload (ehci 4.9) */ (usb_maxpacket(dev, pipe) << 16) | /* MPS */ (1 << 14) | QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */ - (usb_pipedevice(pipe) << 0); - qh->qh_endpt2 = (1 << 30) | /* 1 Tx per mframe */ - (1 << 0); /* S-mask: microframe 0 */ + (usb_pipedevice(pipe) << 0)); + qh->qh_endpt2 = cpu_to_hc32((1 << 30) | /* 1 Tx per mframe */ + (1 << 0)); /* S-mask: microframe 0 */ if (dev->speed == USB_SPEED_LOW || dev->speed == USB_SPEED_FULL) { debug("TT: port: %d, hub address: %d\n", dev->portnr, dev->parent->devnum); - qh->qh_endpt2 |= (dev->portnr << 23) | + qh->qh_endpt2 |= cpu_to_hc32((dev->portnr << 23) | (dev->parent->devnum << 16) | - (0x1c << 8); /* C-mask: microframes 2-4 */ + (0x1c << 8)); /* C-mask: microframes 2-4 */ } - td->qt_next = QT_NEXT_TERMINATE; - td->qt_altnext = QT_NEXT_TERMINATE; + td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); + td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); debug("communication direction is '%s'\n", usb_pipein(pipe) ? "in" : "out"); - td->qt_token = (elementsize << 16) | + td->qt_token = cpu_to_hc32((elementsize << 16) | ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */ - 0x80; /* active */ - td->qt_buffer[0] = (uint32_t)buffer + i * elementsize; - td->qt_buffer[1] = (td->qt_buffer[0] + 0x1000) & ~0xfff; - td->qt_buffer[2] = (td->qt_buffer[0] + 0x2000) & ~0xfff; - td->qt_buffer[3] = (td->qt_buffer[0] + 0x3000) & ~0xfff; - td->qt_buffer[4] = (td->qt_buffer[0] + 0x4000) & ~0xfff; + 0x80); /* active */ + td->qt_buffer[0] = + cpu_to_hc32((uint32_t)buffer + i * elementsize); + td->qt_buffer[1] = + cpu_to_hc32((td->qt_buffer[0] + 0x1000) & ~0xfff); + td->qt_buffer[2] = + cpu_to_hc32((td->qt_buffer[0] + 0x2000) & ~0xfff); + td->qt_buffer[3] = + cpu_to_hc32((td->qt_buffer[0] + 0x3000) & ~0xfff); + td->qt_buffer[4] = + cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff); *buf = buffer + i * elementsize; } @@ -1241,7 +1247,7 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, /* hook up to periodic list */ struct QH *list = &ctrl->periodic_queue; result->last->qh_link = list->qh_link; - list->qh_link = (uint32_t)result->first | QH_LINK_TYPE_QH; + list->qh_link = cpu_to_hc32((uint32_t)result->first | QH_LINK_TYPE_QH); flush_dcache_range((uint32_t)result->last, ALIGN_END_ADDR(struct QH, result->last, 1)); @@ -1280,7 +1286,7 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) /* still active */ invalidate_dcache_range((uint32_t)cur, ALIGN_END_ADDR(struct QH, cur, 1)); - if (cur->qh_overlay.qt_token & 0x80) { + if (cur->qh_overlay.qt_token & cpu_to_hc32(0x80)) { debug("Exit poll_int_queue with no completed intr transfer. " "token is %x\n", cur->qh_overlay.qt_token); return NULL; @@ -1311,7 +1317,7 @@ destroy_int_queue(struct usb_device *dev, struct int_queue *queue) struct QH *cur = &ctrl->periodic_queue; timeout = get_timer(0) + 500; /* abort after 500ms */ - while (!(cur->qh_link & QH_LINK_TERMINATE)) { + while (!(cur->qh_link & cpu_to_hc32(QH_LINK_TERMINATE))) { debug("considering %p, with qh_link %x\n", cur, cur->qh_link); if (NEXT_QH(cur) == queue->first) { debug("found candidate. removing from chain\n"); diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c new file mode 100644 index 0000000..049e4c4 --- /dev/null +++ b/drivers/usb/host/ehci-rmobile.c @@ -0,0 +1,130 @@ +/* + * EHCI HCD (Host Controller Driver) for USB. + * + * Copyright (C) 2013,2014 Renesas Electronics Corporation + * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/ehci-rmobile.h> +#include "ehci.h" + +#if defined(CONFIG_R8A7740) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xC6700000 +}; +#elif defined(CONFIG_R8A7790) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xEE080000, /* USB0 (EHCI) */ + 0xEE0A0000, /* USB1 */ + 0xEE0C0000, /* USB2 */ + 0xEE000000 /* USB3 (USB3.0 Host)*/ +}; +#elif defined(CONFIG_R8A7791) +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { + 0xEE080000, /* USB0 (EHCI) */ + 0xEE0C0000, /* USB1 */ + 0xEE000000 /* USB3 (USB3.0 Host)*/ +}; +#else +#error rmobile EHCI USB driver not supported on this platform +#endif + +int ehci_hcd_stop(int index) +{ + int i; + u32 base; + struct ahbcom_pci_bridge *ahbcom_pci; + + base = usb_base_address[index]; + ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); + writel(0, &ahbcom_pci->ahb_bus_ctr); + + /* reset ehci */ + setbits_le32(base + EHCI_USBCMD, CMD_RESET); + for (i = 100; i > 0; i--) { + if (!(readl(base + EHCI_USBCMD) & CMD_RESET)) + break; + udelay(100); + } + + if (!i) + printf("error : ehci(%d) reset failed.\n", index); + + if (index == (CONFIG_USB_MAX_CONTROLLER_COUNT - 1)) + setbits_le32(SMSTPCR7, SMSTPCR703); + + return 0; +} + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + u32 base; + u32 phys_base; + struct rmobile_ehci_reg *rehci; + struct ahbcom_pci_bridge *ahbcom_pci; + struct ahbconf_pci_bridge *ahbconf_pci; + struct ahb_pciconf *ahb_pciconf_ohci; + struct ahb_pciconf *ahb_pciconf_ehci; + uint32_t cap_base; + + base = usb_base_address[index]; + phys_base = base; + if (index == 0) + clrbits_le32(SMSTPCR7, SMSTPCR703); + + rehci = (struct rmobile_ehci_reg *)(base + EHCI_OFFSET); + ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); + ahbconf_pci = + (struct ahbconf_pci_bridge *)(base + PCI_CONF_AHBPCI_OFFSET); + ahb_pciconf_ohci = (struct ahb_pciconf *)(base + PCI_CONF_OHCI_OFFSET); + ahb_pciconf_ehci = (struct ahb_pciconf *)(base + PCI_CONF_EHCI_OFFSET); + + /* Clock & Reset & Direct Power Down */ + clrsetbits_le32(&ahbcom_pci->usbctr, + (DIRPD | PCICLK_MASK | USBH_RST), USBCTR_WIN_SIZE_1GB); + clrbits_le32(&ahbcom_pci->usbctr, PLL_RST); + + /* AHB-PCI Bridge Communication Registers */ + writel(AHB_BUS_CTR_INIT, &ahbcom_pci->ahb_bus_ctr); + writel((CONFIG_SYS_SDRAM_BASE & 0xf0000000) | PCIAHB_WIN_PREFETCH, + &ahbcom_pci->pciahb_win1_ctr); + writel(0xf0000000 | PCIAHB_WIN_PREFETCH, + &ahbcom_pci->pciahb_win2_ctr); + writel(phys_base | PCIWIN2_PCICMD, &ahbcom_pci->ahbpci_win2_ctr); + + setbits_le32(&ahbcom_pci->pci_arbiter_ctr, + PCIBP_MODE | PCIREQ1 | PCIREQ0); + + /* PCI Configuration Registers for AHBPCI */ + writel(PCIWIN1_PCICMD | AHB_CFG_AHBPCI, + &ahbcom_pci->ahbpci_win1_ctr); + writel(phys_base + AHBPCI_OFFSET, &ahbconf_pci->basead); + writel(CONFIG_SYS_SDRAM_BASE & 0xf0000000, &ahbconf_pci->win1_basead); + writel(0xf0000000, &ahbconf_pci->win2_basead); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahbconf_pci->cmnd_sts); + + /* PCI Configuration Registers for EHCI */ + writel(PCIWIN1_PCICMD | AHB_CFG_HOST, &ahbcom_pci->ahbpci_win1_ctr); + writel(phys_base + OHCI_OFFSET, &ahb_pciconf_ohci->basead); + writel(phys_base + EHCI_OFFSET, &ahb_pciconf_ehci->basead); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahb_pciconf_ohci->cmnd_sts); + writel(SERREN | PERREN | MASTEREN | MEMEN, + &ahb_pciconf_ehci->cmnd_sts); + + /* Enable PCI interrupt */ + setbits_le32(&ahbcom_pci->pci_int_enable, + USBH_PMEEN | USBH_INTBEN | USBH_INTAEN); + + *hccr = (struct ehci_hccr *)((uint32_t)&rehci->hciversion); + cap_base = ehci_readl(&(*hccr)->cr_capbase); + *hcor = (struct ehci_hcor *)((uint32_t)*hccr + HC_LENGTH(cap_base)); + + return 0; +} diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 0b42aa5..38db18e 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -13,7 +13,6 @@ #include <asm/arch/clock.h> #include <asm/arch-tegra/usb.h> #include <asm/arch-tegra/clk_rst.h> -#include <asm/arch/usb.h> #include <usb.h> #include <usb/ulpi.h> #include <libfdt.h> @@ -461,6 +460,9 @@ static int init_utmi_usb_controller(struct fdt_usb *config) if (config->periph_id == PERIPH_ID_USBD) clrbits_le32(&clkrst->crc_utmip_pll_cfg2, UTMIP_FORCE_PD_SAMP_A_POWERDOWN); + if (config->periph_id == PERIPH_ID_USB2) + clrbits_le32(&clkrst->crc_utmip_pll_cfg2, + UTMIP_FORCE_PD_SAMP_B_POWERDOWN); if (config->periph_id == PERIPH_ID_USB3) clrbits_le32(&clkrst->crc_utmip_pll_cfg2, UTMIP_FORCE_PD_SAMP_C_POWERDOWN); @@ -483,9 +485,21 @@ static int init_utmi_usb_controller(struct fdt_usb *config) clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1); /* Select UTMI parallel interface */ - clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, +#if defined(CONFIG_TEGRA20) + if (config->periph_id == PERIPH_ID_USBD) { + clrsetbits_le32(&usbctlr->port_sc1, PTS1_MASK, + PTS_UTMI << PTS1_SHIFT); + clrbits_le32(&usbctlr->port_sc1, STS1); + } else { + clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, + PTS_UTMI << PTS_SHIFT); + clrbits_le32(&usbctlr->port_sc1, STS); + } +#else + clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK, PTS_UTMI << PTS_SHIFT); - clrbits_le32(&usbctlr->port_sc1, STS); + clrbits_le32(&usbctlr->hostpc1_devlc, STS); +#endif /* Deassert power down state */ clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN | @@ -543,7 +557,13 @@ static int init_ulpi_usb_controller(struct fdt_usb *config) ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP); /* Select ULPI parallel interface */ - clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT); +#if defined(CONFIG_TEGRA20) + clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, + PTS_ULPI << PTS_SHIFT); +#else + clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK, + PTS_ULPI << PTS_SHIFT); +#endif /* enable ULPI transceiver */ setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB); diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c index 1146d10..b4946a3 100644 --- a/drivers/usb/host/xhci-exynos5.c +++ b/drivers/usb/host/xhci-exynos5.c @@ -298,7 +298,8 @@ int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor) #ifdef CONFIG_OF_CONTROL /* setup the Vbus gpio here */ - if (!fdtdec_setup_gpio(&ctx->vbus_gpio)) + if (fdt_gpio_isvalid(&ctx->vbus_gpio) && + !fdtdec_setup_gpio(&ctx->vbus_gpio)) gpio_direction_output(ctx->vbus_gpio.gpio, 1); #endif diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c index 0512680..0d7b89f 100644 --- a/drivers/usb/musb-new/musb_uboot.c +++ b/drivers/usb/musb-new/musb_uboot.c @@ -204,7 +204,10 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { - /* TODO: implement me */ + if (driver->disconnect) + driver->disconnect(&gadget->g); + if (driver->unbind) + driver->unbind(&gadget->g); return 0; } #endif /* CONFIG_MUSB_GADGET */ diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c index c047e6e..57cb007 100644 --- a/drivers/video/tegra.c +++ b/drivers/video/tegra.c @@ -229,8 +229,8 @@ static int handle_stage(const void *blob) break; case STAGE_PWM: /* Enable PWM at 15/16 high, 32768 Hz with divider 1 */ - pinmux_set_func(PINGRP_GPU, PMUX_FUNC_PWM); - pinmux_tristate_disable(PINGRP_GPU); + pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM); + pinmux_tristate_disable(PMUX_PINGRP_GPU); pwm_enable(config.pwm_channel, 32768, 0xdf, 1); break; |