diff options
Diffstat (limited to 'drivers')
31 files changed, 1948 insertions, 915 deletions
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile new file mode 100644 index 0000000..2c54793 --- /dev/null +++ b/drivers/crypto/Makefile @@ -0,0 +1,47 @@ +# +# Copyright (c) 2013 Samsung Electronics Co., Ltd. +# http://www.samsung.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libcrypto.o + +COBJS-$(CONFIG_EXYNOS_ACE_SHA) += ace_sha.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################## diff --git a/drivers/crypto/ace_sha.c b/drivers/crypto/ace_sha.c new file mode 100644 index 0000000..53ebb33 --- /dev/null +++ b/drivers/crypto/ace_sha.c @@ -0,0 +1,126 @@ +/* + * Advanced Crypto Engine - SHA Firmware + * Copyright (c) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <common.h> +#include <sha256.h> +#include <sha1.h> +#include <asm/errno.h> +#include "ace_sha.h" + +/* SHA1 value for the message of zero length */ +static const unsigned char sha1_digest_emptymsg[SHA1_SUM_LEN] = { + 0xDA, 0x39, 0xA3, 0xEE, 0x5E, 0x6B, 0x4B, 0x0D, + 0x32, 0x55, 0xBF, 0xFF, 0x95, 0x60, 0x18, 0x90, + 0xAF, 0xD8, 0x07, 0x09}; + +/* SHA256 value for the message of zero length */ +static const unsigned char sha256_digest_emptymsg[SHA256_SUM_LEN] = { + 0xE3, 0xB0, 0xC4, 0x42, 0x98, 0xFC, 0x1C, 0x14, + 0x9A, 0xFB, 0xF4, 0xC8, 0x99, 0x6F, 0xB9, 0x24, + 0x27, 0xAE, 0x41, 0xE4, 0x64, 0x9B, 0x93, 0x4C, + 0xA4, 0x95, 0x99, 0x1B, 0x78, 0x52, 0xB8, 0x55}; + +int ace_sha_hash_digest(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, unsigned int hash_type) +{ + unsigned int i, reg, len; + unsigned int *pdigest; + struct exynos_ace_sfr *ace_sha_reg = + (struct exynos_ace_sfr *)samsung_get_base_ace_sfr(); + + if (buf_len == 0) { + /* ACE H/W cannot compute hash value for empty string */ + if (hash_type == ACE_SHA_TYPE_SHA1) + memcpy(pout, sha1_digest_emptymsg, SHA1_SUM_LEN); + else + memcpy(pout, sha256_digest_emptymsg, SHA256_SUM_LEN); + return 0; + } + + /* Flush HRDMA */ + writel(ACE_FC_HRDMACFLUSH_ON, &ace_sha_reg->fc_hrdmac); + writel(ACE_FC_HRDMACFLUSH_OFF, &ace_sha_reg->fc_hrdmac); + + /* Set byte swap of data in */ + writel(ACE_HASH_SWAPDI_ON | ACE_HASH_SWAPDO_ON | ACE_HASH_SWAPIV_ON, + &ace_sha_reg->hash_byteswap); + + /* Select Hash input mux as external source */ + reg = readl(&ace_sha_reg->fc_fifoctrl); + reg = (reg & ~ACE_FC_SELHASH_MASK) | ACE_FC_SELHASH_EXOUT; + writel(reg, &ace_sha_reg->fc_fifoctrl); + + /* Set Hash as SHA1 or SHA256 and start Hash engine */ + reg = (hash_type == ACE_SHA_TYPE_SHA1) ? + ACE_HASH_ENGSEL_SHA1HASH : ACE_HASH_ENGSEL_SHA256HASH; + reg |= ACE_HASH_STARTBIT_ON; + writel(reg, &ace_sha_reg->hash_control); + + /* Enable FIFO mode */ + writel(ACE_HASH_FIFO_ON, &ace_sha_reg->hash_fifo_mode); + + /* Set message length */ + writel(buf_len, &ace_sha_reg->hash_msgsize_low); + writel(0, &ace_sha_reg->hash_msgsize_high); + + /* Set HRDMA */ + writel((unsigned int)pbuf, &ace_sha_reg->fc_hrdmas); + writel(buf_len, &ace_sha_reg->fc_hrdmal); + + while ((readl(&ace_sha_reg->hash_status) & ACE_HASH_MSGDONE_MASK) == + ACE_HASH_MSGDONE_OFF) { + /* + * PRNG error bit goes HIGH if a PRNG request occurs without + * a complete seed setup. We are using this bit to check h/w + * fault because proper setup is not expected in that case. + */ + if ((readl(&ace_sha_reg->hash_status) + & ACE_HASH_PRNGERROR_MASK) == ACE_HASH_PRNGERROR_ON) + return -EBUSY; + } + + /* Clear MSG_DONE bit */ + writel(ACE_HASH_MSGDONE_ON, &ace_sha_reg->hash_status); + + /* Read hash result */ + pdigest = (unsigned int *)pout; + len = (hash_type == ACE_SHA_TYPE_SHA1) ? SHA1_SUM_LEN : SHA256_SUM_LEN; + + for (i = 0; i < len / 4; i++) + pdigest[i] = readl(&ace_sha_reg->hash_result[i]); + + /* Clear HRDMA pending bit */ + writel(ACE_FC_HRDMA, &ace_sha_reg->fc_intpend); + + return 0; +} + +void hw_sha256(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, unsigned int chunk_size) +{ + if (ace_sha_hash_digest(pbuf, buf_len, pout, ACE_SHA_TYPE_SHA256)) + debug("ACE was not setup properly or it is faulty\n"); +} + +void hw_sha1(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, unsigned int chunk_size) +{ + if (ace_sha_hash_digest(pbuf, buf_len, pout, ACE_SHA_TYPE_SHA1)) + debug("ACE was not setup properly or it is faulty\n"); +} diff --git a/drivers/crypto/ace_sha.h b/drivers/crypto/ace_sha.h new file mode 100644 index 0000000..0292a08 --- /dev/null +++ b/drivers/crypto/ace_sha.h @@ -0,0 +1,325 @@ +/* + * Header file for Advanced Crypto Engine - SFR definitions + * + * Copyright (c) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ACE_SHA_H +#define __ACE_SHA_H + +struct exynos_ace_sfr { + unsigned int fc_intstat; /* base + 0 */ + unsigned int fc_intenset; + unsigned int fc_intenclr; + unsigned int fc_intpend; + unsigned int fc_fifostat; + unsigned int fc_fifoctrl; + unsigned int fc_global; + unsigned int res1; + unsigned int fc_brdmas; + unsigned int fc_brdmal; + unsigned int fc_brdmac; + unsigned int res2; + unsigned int fc_btdmas; + unsigned int fc_btdmal; + unsigned int fc_btdmac; + unsigned int res3; + unsigned int fc_hrdmas; + unsigned int fc_hrdmal; + unsigned int fc_hrdmac; + unsigned int res4; + unsigned int fc_pkdmas; + unsigned int fc_pkdmal; + unsigned int fc_pkdmac; + unsigned int fc_pkdmao; + unsigned char res5[0x1a0]; + + unsigned int aes_control; /* base + 0x200 */ + unsigned int aes_status; + unsigned char res6[0x8]; + unsigned int aes_in[4]; + unsigned int aes_out[4]; + unsigned int aes_iv[4]; + unsigned int aes_cnt[4]; + unsigned char res7[0x30]; + unsigned int aes_key[8]; + unsigned char res8[0x60]; + + unsigned int tdes_control; /* base + 0x300 */ + unsigned int tdes_status; + unsigned char res9[0x8]; + unsigned int tdes_key[6]; + unsigned int tdes_iv[2]; + unsigned int tdes_in[2]; + unsigned int tdes_out[2]; + unsigned char res10[0xc0]; + + unsigned int hash_control; /* base + 0x400 */ + unsigned int hash_control2; + unsigned int hash_fifo_mode; + unsigned int hash_byteswap; + unsigned int hash_status; + unsigned char res11[0xc]; + unsigned int hash_msgsize_low; + unsigned int hash_msgsize_high; + unsigned int hash_prelen_low; + unsigned int hash_prelen_high; + unsigned int hash_in[16]; + unsigned int hash_key_in[16]; + unsigned int hash_iv[8]; + unsigned char res12[0x30]; + unsigned int hash_result[8]; + unsigned char res13[0x20]; + unsigned int hash_seed[8]; + unsigned int hash_prng[8]; + unsigned char res14[0x180]; + + unsigned int pka_sfr[5]; /* base + 0x700 */ +}; + +/* ACE_FC_INT */ +#define ACE_FC_PKDMA (1 << 0) +#define ACE_FC_HRDMA (1 << 1) +#define ACE_FC_BTDMA (1 << 2) +#define ACE_FC_BRDMA (1 << 3) +#define ACE_FC_PRNG_ERROR (1 << 4) +#define ACE_FC_MSG_DONE (1 << 5) +#define ACE_FC_PRNG_DONE (1 << 6) +#define ACE_FC_PARTIAL_DONE (1 << 7) + +/* ACE_FC_FIFOSTAT */ +#define ACE_FC_PKFIFO_EMPTY (1 << 0) +#define ACE_FC_PKFIFO_FULL (1 << 1) +#define ACE_FC_HRFIFO_EMPTY (1 << 2) +#define ACE_FC_HRFIFO_FULL (1 << 3) +#define ACE_FC_BTFIFO_EMPTY (1 << 4) +#define ACE_FC_BTFIFO_FULL (1 << 5) +#define ACE_FC_BRFIFO_EMPTY (1 << 6) +#define ACE_FC_BRFIFO_FULL (1 << 7) + +/* ACE_FC_FIFOCTRL */ +#define ACE_FC_SELHASH_MASK (3 << 0) +#define ACE_FC_SELHASH_EXOUT (0 << 0) /* independent source */ +#define ACE_FC_SELHASH_BCIN (1 << 0) /* blk cipher input */ +#define ACE_FC_SELHASH_BCOUT (2 << 0) /* blk cipher output */ +#define ACE_FC_SELBC_MASK (1 << 2) +#define ACE_FC_SELBC_AES (0 << 2) +#define ACE_FC_SELBC_DES (1 << 2) + +/* ACE_FC_GLOBAL */ +#define ACE_FC_SSS_RESET (1 << 0) +#define ACE_FC_DMA_RESET (1 << 1) +#define ACE_FC_AES_RESET (1 << 2) +#define ACE_FC_DES_RESET (1 << 3) +#define ACE_FC_HASH_RESET (1 << 4) +#define ACE_FC_AXI_ENDIAN_MASK (3 << 6) +#define ACE_FC_AXI_ENDIAN_LE (0 << 6) +#define ACE_FC_AXI_ENDIAN_BIBE (1 << 6) +#define ACE_FC_AXI_ENDIAN_WIBE (2 << 6) + +/* Feed control - BRDMA control */ +#define ACE_FC_BRDMACFLUSH_OFF (0 << 0) +#define ACE_FC_BRDMACFLUSH_ON (1 << 0) +#define ACE_FC_BRDMACSWAP_ON (1 << 1) +#define ACE_FC_BRDMACARPROT_MASK (0x7 << 2) +#define ACE_FC_BRDMACARPROT_OFS 2 +#define ACE_FC_BRDMACARCACHE_MASK (0xf << 5) +#define ACE_FC_BRDMACARCACHE_OFS 5 + +/* Feed control - BTDMA control */ +#define ACE_FC_BTDMACFLUSH_OFF (0 << 0) +#define ACE_FC_BTDMACFLUSH_ON (1 << 0) +#define ACE_FC_BTDMACSWAP_ON (1 << 1) +#define ACE_FC_BTDMACAWPROT_MASK (0x7 << 2) +#define ACE_FC_BTDMACAWPROT_OFS 2 +#define ACE_FC_BTDMACAWCACHE_MASK (0xf << 5) +#define ACE_FC_BTDMACAWCACHE_OFS 5 + +/* Feed control - HRDMA control */ +#define ACE_FC_HRDMACFLUSH_OFF (0 << 0) +#define ACE_FC_HRDMACFLUSH_ON (1 << 0) +#define ACE_FC_HRDMACSWAP_ON (1 << 1) +#define ACE_FC_HRDMACARPROT_MASK (0x7 << 2) +#define ACE_FC_HRDMACARPROT_OFS 2 +#define ACE_FC_HRDMACARCACHE_MASK (0xf << 5) +#define ACE_FC_HRDMACARCACHE_OFS 5 + +/* Feed control - PKDMA control */ +#define ACE_FC_PKDMACBYTESWAP_ON (1 << 3) +#define ACE_FC_PKDMACDESEND_ON (1 << 2) +#define ACE_FC_PKDMACTRANSMIT_ON (1 << 1) +#define ACE_FC_PKDMACFLUSH_ON (1 << 0) + +/* Feed control - PKDMA offset */ +#define ACE_FC_SRAMOFFSET_MASK 0xfff + +/* AES control */ +#define ACE_AES_MODE_MASK (1 << 0) +#define ACE_AES_MODE_ENC (0 << 0) +#define ACE_AES_MODE_DEC (1 << 0) +#define ACE_AES_OPERMODE_MASK (3 << 1) +#define ACE_AES_OPERMODE_ECB (0 << 1) +#define ACE_AES_OPERMODE_CBC (1 << 1) +#define ACE_AES_OPERMODE_CTR (2 << 1) +#define ACE_AES_FIFO_MASK (1 << 3) +#define ACE_AES_FIFO_OFF (0 << 3) /* CPU mode */ +#define ACE_AES_FIFO_ON (1 << 3) /* FIFO mode */ +#define ACE_AES_KEYSIZE_MASK (3 << 4) +#define ACE_AES_KEYSIZE_128 (0 << 4) +#define ACE_AES_KEYSIZE_192 (1 << 4) +#define ACE_AES_KEYSIZE_256 (2 << 4) +#define ACE_AES_KEYCNGMODE_MASK (1 << 6) +#define ACE_AES_KEYCNGMODE_OFF (0 << 6) +#define ACE_AES_KEYCNGMODE_ON (1 << 6) +#define ACE_AES_SWAP_MASK (0x1f << 7) +#define ACE_AES_SWAPKEY_OFF (0 << 7) +#define ACE_AES_SWAPKEY_ON (1 << 7) +#define ACE_AES_SWAPCNT_OFF (0 << 8) +#define ACE_AES_SWAPCNT_ON (1 << 8) +#define ACE_AES_SWAPIV_OFF (0 << 9) +#define ACE_AES_SWAPIV_ON (1 << 9) +#define ACE_AES_SWAPDO_OFF (0 << 10) +#define ACE_AES_SWAPDO_ON (1 << 10) +#define ACE_AES_SWAPDI_OFF (0 << 11) +#define ACE_AES_SWAPDI_ON (1 << 11) +#define ACE_AES_COUNTERSIZE_MASK (3 << 12) +#define ACE_AES_COUNTERSIZE_128 (0 << 12) +#define ACE_AES_COUNTERSIZE_64 (1 << 12) +#define ACE_AES_COUNTERSIZE_32 (2 << 12) +#define ACE_AES_COUNTERSIZE_16 (3 << 12) + +/* AES status */ +#define ACE_AES_OUTRDY_MASK (1 << 0) +#define ACE_AES_OUTRDY_OFF (0 << 0) +#define ACE_AES_OUTRDY_ON (1 << 0) +#define ACE_AES_INRDY_MASK (1 << 1) +#define ACE_AES_INRDY_OFF (0 << 1) +#define ACE_AES_INRDY_ON (1 << 1) +#define ACE_AES_BUSY_MASK (1 << 2) +#define ACE_AES_BUSY_OFF (0 << 2) +#define ACE_AES_BUSY_ON (1 << 2) + +/* TDES control */ +#define ACE_TDES_MODE_MASK (1 << 0) +#define ACE_TDES_MODE_ENC (0 << 0) +#define ACE_TDES_MODE_DEC (1 << 0) +#define ACE_TDES_OPERMODE_MASK (1 << 1) +#define ACE_TDES_OPERMODE_ECB (0 << 1) +#define ACE_TDES_OPERMODE_CBC (1 << 1) +#define ACE_TDES_SEL_MASK (3 << 3) +#define ACE_TDES_SEL_DES (0 << 3) +#define ACE_TDES_SEL_TDESEDE (1 << 3) /* TDES EDE mode */ +#define ACE_TDES_SEL_TDESEEE (3 << 3) /* TDES EEE mode */ +#define ACE_TDES_FIFO_MASK (1 << 5) +#define ACE_TDES_FIFO_OFF (0 << 5) /* CPU mode */ +#define ACE_TDES_FIFO_ON (1 << 5) /* FIFO mode */ +#define ACE_TDES_SWAP_MASK (0xf << 6) +#define ACE_TDES_SWAPKEY_OFF (0 << 6) +#define ACE_TDES_SWAPKEY_ON (1 << 6) +#define ACE_TDES_SWAPIV_OFF (0 << 7) +#define ACE_TDES_SWAPIV_ON (1 << 7) +#define ACE_TDES_SWAPDO_OFF (0 << 8) +#define ACE_TDES_SWAPDO_ON (1 << 8) +#define ACE_TDES_SWAPDI_OFF (0 << 9) +#define ACE_TDES_SWAPDI_ON (1 << 9) + +/* TDES status */ +#define ACE_TDES_OUTRDY_MASK (1 << 0) +#define ACE_TDES_OUTRDY_OFF (0 << 0) +#define ACE_TDES_OUTRDY_ON (1 << 0) +#define ACE_TDES_INRDY_MASK (1 << 1) +#define ACE_TDES_INRDY_OFF (0 << 1) +#define ACE_TDES_INRDY_ON (1 << 1) +#define ACE_TDES_BUSY_MASK (1 << 2) +#define ACE_TDES_BUSY_OFF (0 << 2) +#define ACE_TDES_BUSY_ON (1 << 2) + +/* Hash control */ +#define ACE_HASH_ENGSEL_MASK (0xf << 0) +#define ACE_HASH_ENGSEL_SHA1HASH (0x0 << 0) +#define ACE_HASH_ENGSEL_SHA1HMAC (0x1 << 0) +#define ACE_HASH_ENGSEL_SHA1HMACIN (0x1 << 0) +#define ACE_HASH_ENGSEL_SHA1HMACOUT (0x9 << 0) +#define ACE_HASH_ENGSEL_MD5HASH (0x2 << 0) +#define ACE_HASH_ENGSEL_MD5HMAC (0x3 << 0) +#define ACE_HASH_ENGSEL_MD5HMACIN (0x3 << 0) +#define ACE_HASH_ENGSEL_MD5HMACOUT (0xb << 0) +#define ACE_HASH_ENGSEL_SHA256HASH (0x4 << 0) +#define ACE_HASH_ENGSEL_SHA256HMAC (0x5 << 0) +#define ACE_HASH_ENGSEL_PRNG (0x8 << 0) +#define ACE_HASH_STARTBIT_ON (1 << 4) +#define ACE_HASH_USERIV_EN (1 << 5) +#define ACE_HASH_PAUSE_ON (1 << 0) + +/* Hash control - FIFO mode */ +#define ACE_HASH_FIFO_MASK (1 << 0) +#define ACE_HASH_FIFO_OFF (0 << 0) +#define ACE_HASH_FIFO_ON (1 << 0) + +/* Hash control - byte swap */ +#define ACE_HASH_SWAP_MASK (0xf << 0) +#define ACE_HASH_SWAPKEY_OFF (0 << 0) +#define ACE_HASH_SWAPKEY_ON (1 << 0) +#define ACE_HASH_SWAPIV_OFF (0 << 1) +#define ACE_HASH_SWAPIV_ON (1 << 1) +#define ACE_HASH_SWAPDO_OFF (0 << 2) +#define ACE_HASH_SWAPDO_ON (1 << 2) +#define ACE_HASH_SWAPDI_OFF (0 << 3) +#define ACE_HASH_SWAPDI_ON (1 << 3) + +/* Hash status */ +#define ACE_HASH_BUFRDY_MASK (1 << 0) +#define ACE_HASH_BUFRDY_OFF (0 << 0) +#define ACE_HASH_BUFRDY_ON (1 << 0) +#define ACE_HASH_SEEDSETTING_MASK (1 << 1) +#define ACE_HASH_SEEDSETTING_OFF (0 << 1) +#define ACE_HASH_SEEDSETTING_ON (1 << 1) +#define ACE_HASH_PRNGBUSY_MASK (1 << 2) +#define ACE_HASH_PRNGBUSY_OFF (0 << 2) +#define ACE_HASH_PRNGBUSY_ON (1 << 2) +#define ACE_HASH_PARTIALDONE_MASK (1 << 4) +#define ACE_HASH_PARTIALDONE_OFF (0 << 4) +#define ACE_HASH_PARTIALDONE_ON (1 << 4) +#define ACE_HASH_PRNGDONE_MASK (1 << 5) +#define ACE_HASH_PRNGDONE_OFF (0 << 5) +#define ACE_HASH_PRNGDONE_ON (1 << 5) +#define ACE_HASH_MSGDONE_MASK (1 << 6) +#define ACE_HASH_MSGDONE_OFF (0 << 6) +#define ACE_HASH_MSGDONE_ON (1 << 6) +#define ACE_HASH_PRNGERROR_MASK (1 << 7) +#define ACE_HASH_PRNGERROR_OFF (0 << 7) +#define ACE_HASH_PRNGERROR_ON (1 << 7) + +#define ACE_SHA_TYPE_SHA1 1 +#define ACE_SHA_TYPE_SHA256 2 + +/** + * Computes hash value of input pbuf using ACE + * + * @param in_addr A pointer to the input buffer + * @param bufleni Byte length of input buffer + * @param out_addr A pointer to the output buffer. When complete + * 32 bytes are copied to pout[0]...pout[31]. Thus, a user + * should allocate at least 32 bytes at pOut in advance. + * @param hash_type SHA1 or SHA256 + * + * @return 0 on Success, -1 on Failure (Timeout) + */ +int ace_sha_hash_digest(const uchar * in_addr, uint buflen, + uchar * out_addr, uint hash_type); +#endif diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index b0afc3c..54cfabf 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -39,6 +39,7 @@ #include <common.h> #include <malloc.h> #include <sdhci.h> +#include <asm/arch/timer.h> /* 400KHz is max freq for card ID etc. Use that as min */ #define MIN_FREQ 400000 @@ -67,11 +68,11 @@ static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val, * (Which is just as well - otherwise we'd have to nobble the DMA engine * too) */ - while (get_timer(bcm_host->last_write) < bcm_host->twoticks_delay) + while (get_timer_us(bcm_host->last_write) < bcm_host->twoticks_delay) ; writel(val, host->ioaddr + reg); - bcm_host->last_write = get_timer(0); + bcm_host->last_write = get_timer_us(0); } static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 54b5363..e945c0a 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -327,9 +327,6 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) while (!(esdhc_read32(®s->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE))) ; - if (data && (data->flags & MMC_DATA_READ)) - check_and_invalidate_dcache_range(cmd, data); - irqstat = esdhc_read32(®s->irqstat); esdhc_write32(®s->irqstat, irqstat); @@ -400,9 +397,10 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) if (irqstat & DATA_ERR) return COMM_ERR; - } while (!(irqstat & IRQSTAT_TC) && - (esdhc_read32(®s->prsstat) & PRSSTAT_DLA)); + } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE); #endif + if (data->flags & MMC_DATA_READ) + check_and_invalidate_dcache_range(cmd, data); } esdhc_write32(®s->irqstat, -1); @@ -580,6 +578,13 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC; + if (cfg->max_bus_width > 0) { + if (cfg->max_bus_width < 8) + mmc->host_caps &= ~MMC_MODE_8BIT; + if (cfg->max_bus_width < 4) + mmc->host_caps &= ~MMC_MODE_4BIT; + } + if (caps & ESDHC_HOSTCAPBLT_HSS) mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index c77c0c4..35769c5 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -73,7 +73,6 @@ COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o COBJS-$(CONFIG_NAND_NDFC) += ndfc.o COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o -COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_NAND_SPEAR) += spr_nand.o COBJS-$(CONFIG_TEGRA_NAND) += tegra_nand.o COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o @@ -82,6 +81,7 @@ COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o else # minimal SPL drivers COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o +COBJS-$(CONFIG_NAND_MXC) += mxc_nand_spl.o endif # drivers endif # nand diff --git a/drivers/mtd/nand/kirkwood_nand.c b/drivers/mtd/nand/kirkwood_nand.c index bdab5aa..0a99a10 100644 --- a/drivers/mtd/nand/kirkwood_nand.c +++ b/drivers/mtd/nand/kirkwood_nand.c @@ -74,7 +74,11 @@ void kw_nand_select_chip(struct mtd_info *mtd, int chip) int board_nand_init(struct nand_chip *nand) { nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING; +#if defined(CONFIG_NAND_ECC_BCH) + nand->ecc.mode = NAND_ECC_SOFT_BCH; +#else nand->ecc.mode = NAND_ECC_SOFT; +#endif nand->cmd_ctrl = kw_nand_hwcontrol; nand->chip_delay = 40; nand->select_chip = kw_nand_select_chip; diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 04836c0..eeba521 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -22,10 +22,11 @@ #include <nand.h> #include <linux/err.h> #include <asm/io.h> -#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) +#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) || \ + defined(CONFIG_MX51) || defined(CONFIG_MX53) #include <asm/arch/imx-regs.h> #endif -#include <fsl_nfc.h> +#include "mxc_nand.h" #define DRIVER_NAME "mxc_nand" @@ -33,7 +34,10 @@ struct mxc_nand_host { struct mtd_info mtd; struct nand_chip *nand; - struct fsl_nfc_regs __iomem *regs; + struct mxc_nand_regs __iomem *regs; +#ifdef MXC_NFC_V3_2 + struct mxc_nand_ip_regs __iomem *ip_regs; +#endif int spare_only; int status_request; int pagesize_2k; @@ -75,7 +79,7 @@ static struct nand_ecclayout nand_hw_eccoob2k = { .oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} }, }; #endif -#elif defined(MXC_NFC_V2_1) +#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2) #ifndef CONFIG_SYS_NAND_LARGEPAGE static struct nand_ecclayout nand_hw_eccoob = { .eccbytes = 9, @@ -96,45 +100,14 @@ static struct nand_ecclayout nand_hw_eccoob2k = { #endif #endif -#ifdef CONFIG_MX27 static int is_16bit_nand(void) { - struct system_control_regs *sc_regs = - (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; - - if (readl(&sc_regs->fmcr) & NF_16BIT_SEL) - return 1; - else - return 0; -} -#elif defined(CONFIG_MX31) -static int is_16bit_nand(void) -{ - struct clock_control_regs *sc_regs = - (struct clock_control_regs *)CCM_BASE; - - if (readl(&sc_regs->rcsr) & CCM_RCSR_NF16B) - return 1; - else - return 0; -} -#elif defined(CONFIG_MX25) || defined(CONFIG_MX35) -static int is_16bit_nand(void) -{ - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - - if (readl(&ccm->rcsr) & CCM_RCSR_NF_16BIT_SEL) - return 1; - else - return 0; -} +#if defined(CONFIG_SYS_NAND_BUSWIDTH_16BIT) + return 1; #else -#warning "8/16 bit NAND autodetection not supported" -static int is_16bit_nand(void) -{ return 0; -} #endif +} static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size) { @@ -148,7 +121,7 @@ static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size /* * This function polls the NANDFC to wait for the basic operation to - * complete by checking the INT bit of config2 register. + * complete by checking the INT bit. */ static void wait_op_done(struct mxc_nand_host *host, int max_retries, uint16_t param) @@ -156,10 +129,17 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries, uint32_t tmp; while (max_retries-- > 0) { - if (readw(&host->regs->config2) & NFC_INT) { - tmp = readw(&host->regs->config2); - tmp &= ~NFC_INT; - writew(tmp, &host->regs->config2); +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + tmp = readnfc(&host->regs->config2); + if (tmp & NFC_V1_V2_CONFIG2_INT) { + tmp &= ~NFC_V1_V2_CONFIG2_INT; + writenfc(tmp, &host->regs->config2); +#elif defined(MXC_NFC_V3_2) + tmp = readnfc(&host->ip_regs->ipc); + if (tmp & NFC_V3_IPC_INT) { + tmp &= ~NFC_V3_IPC_INT; + writenfc(tmp, &host->ip_regs->ipc); +#endif break; } udelay(1); @@ -178,8 +158,8 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd) { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd); - writew(cmd, &host->regs->flash_cmd); - writew(NFC_CMD, &host->regs->config2); + writenfc(cmd, &host->regs->flash_cmd); + writenfc(NFC_CMD, &host->regs->operation); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, cmd); @@ -194,8 +174,8 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr) { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr); - writew(addr, &host->regs->flash_addr); - writew(NFC_ADDR, &host->regs->config2); + writenfc(addr, &host->regs->flash_addr); + writenfc(NFC_ADDR, &host->regs->operation); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, addr); @@ -211,7 +191,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, if (spare_only) MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only); - if (is_mxc_nfc_21()) { + if (is_mxc_nfc_21() || is_mxc_nfc_32()) { int i; /* * The controller copies the 64 bytes of spare data from @@ -227,19 +207,26 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, } } - writew(buf_id, &host->regs->buf_addr); +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + writenfc(buf_id, &host->regs->buf_addr); +#elif defined(MXC_NFC_V3_2) + uint32_t tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_V3_CONFIG1_RBA_MASK; + tmp |= NFC_V3_CONFIG1_RBA(buf_id); + writenfc(tmp, &host->regs->config1); +#endif /* Configure spare or page+spare access */ if (!host->pagesize_2k) { - uint16_t config1 = readw(&host->regs->config1); + uint32_t config1 = readnfc(&host->regs->config1); if (spare_only) - config1 |= NFC_SP_EN; + config1 |= NFC_CONFIG1_SP_EN; else - config1 &= ~NFC_SP_EN; - writew(config1, &host->regs->config1); + config1 &= ~NFC_CONFIG1_SP_EN; + writenfc(config1, &host->regs->config1); } - writew(NFC_INPUT, &host->regs->config2); + writenfc(NFC_INPUT, &host->regs->operation); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); @@ -254,24 +241,31 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only); - writew(buf_id, &host->regs->buf_addr); +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + writenfc(buf_id, &host->regs->buf_addr); +#elif defined(MXC_NFC_V3_2) + uint32_t tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_V3_CONFIG1_RBA_MASK; + tmp |= NFC_V3_CONFIG1_RBA(buf_id); + writenfc(tmp, &host->regs->config1); +#endif /* Configure spare or page+spare access */ if (!host->pagesize_2k) { - uint32_t config1 = readw(&host->regs->config1); + uint32_t config1 = readnfc(&host->regs->config1); if (spare_only) - config1 |= NFC_SP_EN; + config1 |= NFC_CONFIG1_SP_EN; else - config1 &= ~NFC_SP_EN; - writew(config1, &host->regs->config1); + config1 &= ~NFC_CONFIG1_SP_EN; + writenfc(config1, &host->regs->config1); } - writew(NFC_OUTPUT, &host->regs->config2); + writenfc(NFC_OUTPUT, &host->regs->operation); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); - if (is_mxc_nfc_21()) { + if (is_mxc_nfc_21() || is_mxc_nfc_32()) { int i; /* @@ -291,17 +285,23 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, /* Request the NANDFC to perform a read of the NAND device ID. */ static void send_read_id(struct mxc_nand_host *host) { - uint16_t tmp; + uint32_t tmp; +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) /* NANDFC buffer 0 is used for device ID output */ - writew(0x0, &host->regs->buf_addr); + writenfc(0x0, &host->regs->buf_addr); +#elif defined(MXC_NFC_V3_2) + tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_V3_CONFIG1_RBA_MASK; + writenfc(tmp, &host->regs->config1); +#endif /* Read ID into main buffer */ - tmp = readw(&host->regs->config1); - tmp &= ~NFC_SP_EN; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_CONFIG1_SP_EN; + writenfc(tmp, &host->regs->config1); - writew(NFC_ID, &host->regs->config2); + writenfc(NFC_ID, &host->regs->operation); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); @@ -313,32 +313,40 @@ static void send_read_id(struct mxc_nand_host *host) */ static uint16_t get_dev_status(struct mxc_nand_host *host) { +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) void __iomem *main_buf = host->regs->main_area[1]; uint32_t store; - uint16_t ret, tmp; +#endif + uint32_t ret, tmp; /* Issue status request to NAND device */ +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) /* store the main area1 first word, later do recovery */ store = readl(main_buf); /* NANDFC buffer 1 is used for device status */ - writew(1, &host->regs->buf_addr); + writenfc(1, &host->regs->buf_addr); +#endif /* Read status into main buffer */ - tmp = readw(&host->regs->config1); - tmp &= ~NFC_SP_EN; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_CONFIG1_SP_EN; + writenfc(tmp, &host->regs->config1); - writew(NFC_STATUS, &host->regs->config2); + writenfc(NFC_STATUS, &host->regs->operation); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) /* * Status is placed in first word of main buffer * get status, then recovery area 1 data */ ret = readw(main_buf); writel(store, main_buf); +#elif defined(MXC_NFC_V3_2) + ret = readnfc(&host->regs->config1) >> 16; +#endif return ret; } @@ -357,13 +365,23 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - uint16_t tmp = readw(&host->regs->config1); +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + uint16_t tmp = readnfc(&host->regs->config1); if (on) - tmp |= NFC_ECC_EN; + tmp |= NFC_V1_V2_CONFIG1_ECC_EN; else - tmp &= ~NFC_ECC_EN; - writew(tmp, &host->regs->config1); + tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN; + writenfc(tmp, &host->regs->config1); +#elif defined(MXC_NFC_V3_2) + uint32_t tmp = readnfc(&host->ip_regs->config2); + + if (on) + tmp |= NFC_V3_CONFIG2_ECC_EN; + else + tmp &= ~NFC_V3_CONFIG2_ECC_EN; + writenfc(tmp, &host->ip_regs->config2); +#endif } #ifdef CONFIG_MXC_NAND_HWECC @@ -375,7 +393,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode) */ } -#ifdef MXC_NFC_V2_1 +#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2) static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page, int sndcmd) @@ -389,7 +407,7 @@ static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd, MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Reading OOB area of page %u to oob %p\n", - __FUNCTION__, host->page_addr, buf); + __func__, page, buf); chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page); for (i = 0; i < chip->ecc.steps; i++) { @@ -443,7 +461,7 @@ static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd, int n; _mxc_nand_enable_hwecc(mtd, 0); - chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, host->page_addr); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) { host->col_addr = n * eccsize; @@ -487,7 +505,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd, uint8_t *oob = chip->oob_poi; MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n", - host->page_addr, buf, oob); + page, buf, oob); /* first read the data area and the available portion of OOB */ for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) { @@ -525,7 +543,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd, /* Then switch ECC off and read the OOB area to get the ECC code */ _mxc_nand_enable_hwecc(mtd, 0); - chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, host->page_addr); + chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page); eccsteps = chip->ecc.steps; oob = chip->oob_poi + chip->ecc.prepad; for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) { @@ -696,7 +714,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, * additional correction. 2-Bit errors cannot be corrected by * HW ECC, so we need to return failure */ - uint16_t ecc_status = readw(&host->regs->ecc_status_result); + uint16_t ecc_status = readnfc(&host->regs->ecc_status_result); if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { MTDDEBUG(MTD_DEBUG_LEVEL0, @@ -1165,8 +1183,8 @@ static struct nand_bbt_descr bbt_mirror_descr = { int board_nand_init(struct nand_chip *this) { struct mtd_info *mtd; -#ifdef MXC_NFC_V2_1 - uint16_t tmp; +#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2) + uint32_t tmp; #endif #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT @@ -1193,14 +1211,18 @@ int board_nand_init(struct nand_chip *this) this->read_buf = mxc_nand_read_buf; this->verify_buf = mxc_nand_verify_buf; - host->regs = (struct fsl_nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; + host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; +#ifdef MXC_NFC_V3_2 + host->ip_regs = + (struct mxc_nand_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE; +#endif host->clk_act = 1; #ifdef CONFIG_MXC_NAND_HWECC this->ecc.calculate = mxc_nand_calculate_ecc; this->ecc.hwctl = mxc_nand_enable_hwecc; this->ecc.correct = mxc_nand_correct_data; - if (is_mxc_nfc_21()) { + if (is_mxc_nfc_21() || is_mxc_nfc_32()) { this->ecc.mode = NAND_ECC_HW_SYNDROME; this->ecc.read_page = mxc_nand_read_page_syndrome; this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome; @@ -1238,25 +1260,26 @@ int board_nand_init(struct nand_chip *this) this->ecc.layout = &nand_hw_eccoob; #endif +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) #ifdef MXC_NFC_V2_1 - tmp = readw(&host->regs->config1); - tmp |= NFC_ONE_CYCLE; - tmp |= NFC_4_8N_ECC; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp |= NFC_V2_CONFIG1_ONE_CYCLE; + tmp |= NFC_V2_CONFIG1_ECC_MODE_4; + writenfc(tmp, &host->regs->config1); if (host->pagesize_2k) - writew(64/2, &host->regs->spare_area_size); + writenfc(64/2, &host->regs->spare_area_size); else - writew(16/2, &host->regs->spare_area_size); + writenfc(16/2, &host->regs->spare_area_size); #endif /* * preset operation * Unlock the internal RAM Buffer */ - writew(0x2, &host->regs->config); + writenfc(0x2, &host->regs->config); /* Blocks to be unlocked */ - writew(0x0, &host->regs->unlockstart_blkaddr); + writenfc(0x0, &host->regs->unlockstart_blkaddr); /* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the * unlockend_blkaddr, but the magic 0x4000 does not always work * when writing more than some 32 megabytes (on 2k page nands) @@ -1268,10 +1291,53 @@ int board_nand_init(struct nand_chip *this) * This might be NAND chip specific and the i.MX31 datasheet is * extremely vague about the semantics of this register. */ - writew(0xFFFF, &host->regs->unlockend_blkaddr); + writenfc(0xFFFF, &host->regs->unlockend_blkaddr); /* Unlock Block Command for given address range */ - writew(0x4, &host->regs->wrprot); + writenfc(0x4, &host->regs->wrprot); +#elif defined(MXC_NFC_V3_2) + writenfc(NFC_V3_CONFIG1_RBA(0), &host->regs->config1); + writenfc(NFC_V3_IPC_CREQ, &host->ip_regs->ipc); + + /* Unlock the internal RAM Buffer */ + writenfc(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK, + &host->ip_regs->wrprot); + + /* Blocks to be unlocked */ + for (tmp = 0; tmp < CONFIG_SYS_NAND_MAX_CHIPS; tmp++) + writenfc(0x0 | 0xFFFF << 16, + &host->ip_regs->wrprot_unlock_blkaddr[tmp]); + + writenfc(0, &host->ip_regs->ipc); + + tmp = readnfc(&host->ip_regs->config2); + tmp &= ~(NFC_V3_CONFIG2_SPAS_MASK | NFC_V3_CONFIG2_EDC_MASK | + NFC_V3_CONFIG2_ECC_MODE_8 | NFC_V3_CONFIG2_PS_MASK); + tmp |= NFC_V3_CONFIG2_ONE_CYCLE; + + if (host->pagesize_2k) { + tmp |= NFC_V3_CONFIG2_SPAS(64/2); + tmp |= NFC_V3_CONFIG2_PS_2048; + } else { + tmp |= NFC_V3_CONFIG2_SPAS(16/2); + tmp |= NFC_V3_CONFIG2_PS_512; + } + + writenfc(tmp, &host->ip_regs->config2); + + tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) | + NFC_V3_CONFIG3_NO_SDMA | + NFC_V3_CONFIG3_RBB_MODE | + NFC_V3_CONFIG3_SBB(6) | /* Reset default */ + NFC_V3_CONFIG3_ADD_OP(0); + + if (!(this->options & NAND_BUSWIDTH_16)) + tmp |= NFC_V3_CONFIG3_FW8; + + writenfc(tmp, &host->ip_regs->config3); + + writenfc(0, &host->ip_regs->delay_line); +#endif return 0; } diff --git a/drivers/mtd/nand/mxc_nand.h b/drivers/mtd/nand/mxc_nand.h new file mode 100644 index 0000000..308ff8d --- /dev/null +++ b/drivers/mtd/nand/mxc_nand.h @@ -0,0 +1,225 @@ +/* + * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MXC_NAND_H +#define __MXC_NAND_H + +/* + * Register map and bit definitions for the Freescale NAND Flash Controller + * present in various i.MX devices. + * + * MX31 and MX27 have version 1, which has: + * 4 512-byte main buffers and + * 4 16-byte spare buffers + * to support up to 2K byte pagesize nand. + * Reading or writing a 2K page requires 4 FDI/FDO cycles. + * + * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which + * have: + * 8 512-byte main buffers and + * 8 64-byte spare buffers + * to support up to 4K byte pagesize nand. + * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle. + * Also some of registers are moved and/or changed meaning as seen below. + */ +#if defined(CONFIG_MX27) || defined(CONFIG_MX31) +#define MXC_NFC_V1 +#define is_mxc_nfc_1() 1 +#define is_mxc_nfc_21() 0 +#define is_mxc_nfc_32() 0 +#elif defined(CONFIG_MX25) || defined(CONFIG_MX35) +#define MXC_NFC_V2_1 +#define is_mxc_nfc_1() 0 +#define is_mxc_nfc_21() 1 +#define is_mxc_nfc_32() 0 +#elif defined(CONFIG_MX51) || defined(CONFIG_MX53) +#define MXC_NFC_V3 +#define MXC_NFC_V3_2 +#define is_mxc_nfc_1() 0 +#define is_mxc_nfc_21() 0 +#define is_mxc_nfc_32() 1 +#else +#error "MXC NFC implementation not supported" +#endif +#define is_mxc_nfc_3() is_mxc_nfc_32() + +#if defined(MXC_NFC_V1) +#define NAND_MXC_NR_BUFS 4 +#define NAND_MXC_SPARE_BUF_SIZE 16 +#define NAND_MXC_REG_OFFSET 0xe00 +#define NAND_MXC_2K_MULTI_CYCLE +#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2) +#define NAND_MXC_NR_BUFS 8 +#define NAND_MXC_SPARE_BUF_SIZE 64 +#define NAND_MXC_REG_OFFSET 0x1e00 +#endif + +struct mxc_nand_regs { + u8 main_area[NAND_MXC_NR_BUFS][0x200]; + u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE]; + /* + * reserved size is offset of nfc registers + * minus total main and spare sizes + */ + u8 reserved1[NAND_MXC_REG_OFFSET + - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)]; +#if defined(MXC_NFC_V1) + u16 buf_size; + u16 reserved2; + u16 buf_addr; + u16 flash_addr; + u16 flash_cmd; + u16 config; + u16 ecc_status_result; + u16 rsltmain_area; + u16 rsltspare_area; + u16 wrprot; + u16 unlockstart_blkaddr; + u16 unlockend_blkaddr; + u16 nf_wrprst; + u16 config1; + u16 config2; +#elif defined(MXC_NFC_V2_1) + u16 reserved2[2]; + u16 buf_addr; + u16 flash_addr; + u16 flash_cmd; + u16 config; + u32 ecc_status_result; + u16 spare_area_size; + u16 wrprot; + u16 reserved3[2]; + u16 nf_wrprst; + u16 config1; + u16 config2; + u16 reserved4; + u16 unlockstart_blkaddr; + u16 unlockend_blkaddr; + u16 unlockstart_blkaddr1; + u16 unlockend_blkaddr1; + u16 unlockstart_blkaddr2; + u16 unlockend_blkaddr2; + u16 unlockstart_blkaddr3; + u16 unlockend_blkaddr3; +#elif defined(MXC_NFC_V3_2) + u32 flash_cmd; + u32 flash_addr[12]; + u32 config1; + u32 ecc_status_result; + u32 status_sum; + u32 launch; +#endif +}; + +#ifdef MXC_NFC_V3_2 +struct mxc_nand_ip_regs { + u32 wrprot; + u32 wrprot_unlock_blkaddr[8]; + u32 config2; + u32 config3; + u32 ipc; + u32 err_addr; + u32 delay_line; +}; +#endif + +/* Set FCMD to 1, rest to 0 for Command operation */ +#define NFC_CMD 0x1 + +/* Set FADD to 1, rest to 0 for Address operation */ +#define NFC_ADDR 0x2 + +/* Set FDI to 1, rest to 0 for Input operation */ +#define NFC_INPUT 0x4 + +/* Set FDO to 001, rest to 0 for Data Output operation */ +#define NFC_OUTPUT 0x8 + +/* Set FDO to 010, rest to 0 for Read ID operation */ +#define NFC_ID 0x10 + +/* Set FDO to 100, rest to 0 for Read Status operation */ +#define NFC_STATUS 0x20 + +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) +#define NFC_CONFIG1_SP_EN (1 << 2) +#define NFC_CONFIG1_RST (1 << 6) +#define NFC_CONFIG1_CE (1 << 7) +#elif defined(MXC_NFC_V3_2) +#define NFC_CONFIG1_SP_EN (1 << 0) +#define NFC_CONFIG1_CE (1 << 1) +#define NFC_CONFIG1_RST (1 << 2) +#endif +#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3) +#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4) +#define NFC_V1_V2_CONFIG1_BIG (1 << 5) +#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0) +#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8) +#define NFC_V2_CONFIG1_FP_INT (1 << 11) +#define NFC_V3_CONFIG1_RBA_MASK (0x7 << 4) +#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7) << 4) + +#define NFC_V1_V2_CONFIG2_INT (1 << 15) +#define NFC_V3_CONFIG2_PS_MASK (0x3 << 0) +#define NFC_V3_CONFIG2_PS_512 (0 << 0) +#define NFC_V3_CONFIG2_PS_2048 (1 << 0) +#define NFC_V3_CONFIG2_PS_4096 (2 << 0) +#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2) +#define NFC_V3_CONFIG2_ECC_EN (1 << 3) +#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4) +#define NFC_V3_CONFIG2_NUM_ADDR_PH0 (1 << 5) +#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6) +#define NFC_V3_CONFIG2_PPB_MASK (0x3 << 7) +#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7) +#define NFC_V3_CONFIG2_EDC_MASK (0x7 << 9) +#define NFC_V3_CONFIG2_EDC(x) (((x) & 0x7) << 9) +#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x) (((x) & 0x3) << 12) +#define NFC_V3_CONFIG2_INT_MSK (1 << 15) +#define NFC_V3_CONFIG2_SPAS_MASK (0xff << 16) +#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16) +#define NFC_V3_CONFIG2_ST_CMD_MASK (0xff << 24) +#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24) + +#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0) +#define NFC_V3_CONFIG3_FW8 (1 << 3) +#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8) +#define NFC_V3_CONFIG3_NUM_OF_DEVS(x) (((x) & 0x7) << 12) +#define NFC_V3_CONFIG3_RBB_MODE (1 << 15) +#define NFC_V3_CONFIG3_NO_SDMA (1 << 20) + +#define NFC_V3_WRPROT_UNLOCK (1 << 2) +#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6) + +#define NFC_V3_IPC_CREQ (1 << 0) +#define NFC_V3_IPC_INT (1 << 31) + +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) +#define operation config2 +#define readnfc readw +#define writenfc writew +#elif defined(MXC_NFC_V3_2) +#define operation launch +#define readnfc readl +#define writenfc writel +#endif + +#endif /* __MXC_NAND_H */ diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/mxc_nand_spl.c new file mode 100644 index 0000000..09f23c3 --- /dev/null +++ b/drivers/mtd/nand/mxc_nand_spl.c @@ -0,0 +1,366 @@ +/* + * (C) Copyright 2009 + * Magnus Lilja <lilja.magnus@gmail.com> + * + * (C) Copyright 2008 + * Maxim Artamonov, <scn1874 at yandex.ru> + * + * (C) Copyright 2006-2008 + * Stefan Roese, DENX Software Engineering, sr at denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <nand.h> +#include <asm/arch/imx-regs.h> +#include <asm/io.h> +#include "mxc_nand.h" + +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) +static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR; +#elif defined(MXC_NFC_V3_2) +static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR_AXI; +static struct mxc_nand_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR; +#endif + +static void nfc_wait_ready(void) +{ + uint32_t tmp; + +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT)) + ; + + /* Reset interrupt flag */ + tmp = readnfc(&nfc->config2); + tmp &= ~NFC_V1_V2_CONFIG2_INT; + writenfc(tmp, &nfc->config2); +#elif defined(MXC_NFC_V3_2) + while (!(readnfc(&nfc_ip->ipc) & NFC_V3_IPC_INT)) + ; + + /* Reset interrupt flag */ + tmp = readnfc(&nfc_ip->ipc); + tmp &= ~NFC_V3_IPC_INT; + writenfc(tmp, &nfc_ip->ipc); +#endif +} + +static void nfc_nand_init(void) +{ +#if defined(MXC_NFC_V3_2) + int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; + int tmp; + + tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK | + NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) | + NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_OOBSIZE / 2) | + NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN | + NFC_V3_CONFIG2_ONE_CYCLE; + if (CONFIG_SYS_NAND_PAGE_SIZE == 4096) + tmp |= NFC_V3_CONFIG2_PS_4096; + else if (CONFIG_SYS_NAND_PAGE_SIZE == 2048) + tmp |= NFC_V3_CONFIG2_PS_2048; + else if (CONFIG_SYS_NAND_PAGE_SIZE == 512) + tmp |= NFC_V3_CONFIG2_PS_512; + /* + * if spare size is larger that 16 bytes per 512 byte hunk + * then use 8 symbol correction instead of 4 + */ + if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16) + tmp |= NFC_V3_CONFIG2_ECC_MODE_8; + else + tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8; + writenfc(tmp, &nfc_ip->config2); + + tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) | + NFC_V3_CONFIG3_NO_SDMA | + NFC_V3_CONFIG3_RBB_MODE | + NFC_V3_CONFIG3_SBB(6) | /* Reset default */ + NFC_V3_CONFIG3_ADD_OP(0); +#ifndef CONFIG_SYS_NAND_BUSWIDTH_16 + tmp |= NFC_V3_CONFIG3_FW8; +#endif + writenfc(tmp, &nfc_ip->config3); + + writenfc(0, &nfc_ip->delay_line); +#elif defined(MXC_NFC_V2_1) + int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; + int config1; + + writenfc(CONFIG_SYS_NAND_OOBSIZE / 2, &nfc->spare_area_size); + + /* unlocking RAM Buff */ + writenfc(0x2, &nfc->config); + + /* hardware ECC checking and correct */ + config1 = readnfc(&nfc->config1) | NFC_V1_V2_CONFIG1_ECC_EN | + NFC_V1_V2_CONFIG1_INT_MSK | NFC_V2_CONFIG1_ONE_CYCLE | + NFC_V2_CONFIG1_FP_INT; + /* + * if spare size is larger that 16 bytes per 512 byte hunk + * then use 8 symbol correction instead of 4 + */ + if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16) + config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4; + else + config1 |= NFC_V2_CONFIG1_ECC_MODE_4; + writenfc(config1, &nfc->config1); +#elif defined(MXC_NFC_V1) + /* unlocking RAM Buff */ + writenfc(0x2, &nfc->config); + + /* hardware ECC checking and correct */ + writenfc(NFC_V1_V2_CONFIG1_ECC_EN | NFC_V1_V2_CONFIG1_INT_MSK, + &nfc->config1); +#endif +} + +static void nfc_nand_command(unsigned short command) +{ + writenfc(command, &nfc->flash_cmd); + writenfc(NFC_CMD, &nfc->operation); + nfc_wait_ready(); +} + +static void nfc_nand_address(unsigned short address) +{ + writenfc(address, &nfc->flash_addr); + writenfc(NFC_ADDR, &nfc->operation); + nfc_wait_ready(); +} + +static void nfc_nand_page_address(unsigned int page_address) +{ + unsigned int page_count; + + nfc_nand_address(0x00); + + /* code only for large page flash */ + if (CONFIG_SYS_NAND_PAGE_SIZE > 512) + nfc_nand_address(0x00); + + page_count = CONFIG_SYS_NAND_SIZE / CONFIG_SYS_NAND_PAGE_SIZE; + + if (page_address <= page_count) { + page_count--; /* transform 0x01000000 to 0x00ffffff */ + do { + nfc_nand_address(page_address & 0xff); + page_address = page_address >> 8; + page_count = page_count >> 8; + } while (page_count); + } + + nfc_nand_address(0x00); +} + +static void nfc_nand_data_output(void) +{ +#ifdef NAND_MXC_2K_MULTI_CYCLE + int i; +#endif + +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + writenfc(0, &nfc->buf_addr); +#elif defined(MXC_NFC_V3_2) + int config1 = readnfc(&nfc->config1); + config1 &= ~NFC_V3_CONFIG1_RBA_MASK; + writenfc(config1, &nfc->config1); +#endif + writenfc(NFC_OUTPUT, &nfc->operation); + nfc_wait_ready(); +#ifdef NAND_MXC_2K_MULTI_CYCLE + /* + * This NAND controller requires multiple input commands + * for pages larger than 512 bytes. + */ + for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) { + writenfc(i, &nfc->buf_addr); + writenfc(NFC_OUTPUT, &nfc->operation); + nfc_wait_ready(); + } +#endif +} + +static int nfc_nand_check_ecc(void) +{ +#if defined(MXC_NFC_V1) + u16 ecc_status = readw(&nfc->ecc_status_result); + return (ecc_status & 0x3) == 2 || (ecc_status >> 2) == 2; +#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2) + u32 ecc_status = readl(&nfc->ecc_status_result); + int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; + int err_limit = CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16 ? 8 : 4; + int subpages = CONFIG_SYS_NAND_PAGE_SIZE / 512; + + do { + if ((ecc_status & 0xf) > err_limit) + return 1; + ecc_status >>= 4; + } while (--subpages); + + return 0; +#endif +} + +static void nfc_nand_read_page(unsigned int page_address) +{ + /* read in first 0 buffer */ +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + writenfc(0, &nfc->buf_addr); +#elif defined(MXC_NFC_V3_2) + int config1 = readnfc(&nfc->config1); + config1 &= ~NFC_V3_CONFIG1_RBA_MASK; + writenfc(config1, &nfc->config1); +#endif + nfc_nand_command(NAND_CMD_READ0); + nfc_nand_page_address(page_address); + + if (CONFIG_SYS_NAND_PAGE_SIZE > 512) + nfc_nand_command(NAND_CMD_READSTART); + + nfc_nand_data_output(); /* fill the main buffer 0 */ +} + +static int nfc_read_page(unsigned int page_address, unsigned char *buf) +{ + int i; + u32 *src; + u32 *dst; + + nfc_nand_read_page(page_address); + + if (nfc_nand_check_ecc()) + return -1; + + src = (u32 *)&nfc->main_area[0][0]; + dst = (u32 *)buf; + + /* main copy loop from NAND-buffer to SDRAM memory */ + for (i = 0; i < CONFIG_SYS_NAND_PAGE_SIZE / 4; i++) { + writel(readl(src), dst); + src++; + dst++; + } + + return 0; +} + +static int is_badblock(int pagenumber) +{ + int page = pagenumber; + u32 badblock; + u32 *src; + + /* Check the first two pages for bad block markers */ + for (page = pagenumber; page < pagenumber + 2; page++) { + nfc_nand_read_page(page); + + src = (u32 *)&nfc->spare_area[0][0]; + + /* + * IMPORTANT NOTE: The nand flash controller uses a non- + * standard layout for large page devices. This can + * affect the position of the bad block marker. + */ + /* Get the bad block marker */ + badblock = readl(&src[CONFIG_SYS_NAND_BAD_BLOCK_POS / 4]); + badblock >>= 8 * (CONFIG_SYS_NAND_BAD_BLOCK_POS % 4); + badblock &= 0xff; + + /* bad block marker verify */ + if (badblock != 0xff) + return 1; /* potential bad block */ + } + + return 0; +} + +static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) +{ + int i; + unsigned int page; + unsigned int maxpages = CONFIG_SYS_NAND_SIZE / + CONFIG_SYS_NAND_PAGE_SIZE; + + nfc_nand_init(); + + /* Convert to page number */ + page = from / CONFIG_SYS_NAND_PAGE_SIZE; + i = 0; + + while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) { + if (nfc_read_page(page, buf) < 0) + return -1; + + page++; + i++; + buf = buf + CONFIG_SYS_NAND_PAGE_SIZE; + + /* + * Check if we have crossed a block boundary, and if so + * check for bad block. + */ + if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) { + /* + * Yes, new block. See if this block is good. If not, + * loop until we find a good block. + */ + while (is_badblock(page)) { + page = page + CONFIG_SYS_NAND_PAGE_COUNT; + /* Check i we've reached the end of flash. */ + if (page >= maxpages) + return -1; + } + } + } + + return 0; +} + +/* + * The main entry for NAND booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from NAND into SDRAM and starts it from there. + */ +void nand_boot(void) +{ + __attribute__((noreturn)) void (*uboot)(void); + + /* + * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must + * be aligned to full pages + */ + if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { + /* Copy from NAND successful, start U-boot */ + uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; + uboot(); + } else { + /* Unrecoverable error when copying from NAND */ + hang(); + } +} + +/* + * Called in case of an exception. + */ +void hang(void) +{ + /* Loop forever */ + while (1) ; +} diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 6ebbb5e..213d2c9 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -156,7 +156,7 @@ static uint8_t ndfc_read_byte(struct mtd_info *mtd) struct nand_chip *chip = mtd->priv; -#ifdef CONFIG_SYS_NDFC_16BIT +#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT return (uint8_t) readw(chip->IO_ADDR_R); #else return readb(chip->IO_ADDR_R); @@ -218,7 +218,7 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.bytes = 3; nand->select_chip = ndfc_select_chip; -#ifdef CONFIG_SYS_NDFC_16BIT +#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT nand->options |= NAND_BUSWIDTH_16; #endif diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index bbf5443..bc1bcad 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -26,8 +26,9 @@ #include <asm/errno.h> #include <asm/arch/mem.h> #include <asm/arch/cpu.h> -#include <asm/arch/omap_gpmc.h> +#include <asm/omap_gpmc.h> #include <linux/mtd/nand_ecc.h> +#include <linux/bch.h> #include <linux/compiler.h> #include <nand.h> #ifdef CONFIG_AM33XX @@ -37,6 +38,8 @@ static uint8_t cs; static __maybe_unused struct nand_ecclayout hw_nand_oob = GPMC_NAND_HW_ECC_LAYOUT; +static __maybe_unused struct nand_ecclayout hw_bch8_nand_oob = + GPMC_NAND_HW_BCH8_ECC_LAYOUT; /* * omap_nand_hwcontrol - Set the address pointers corretly for the @@ -239,13 +242,13 @@ static void __maybe_unused omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) } /* - * BCH8 support (needs ELM and thus AM33xx-only) + * Generic BCH interface */ -#ifdef CONFIG_AM33XX struct nand_bch_priv { uint8_t mode; uint8_t type; uint8_t nibbles; + struct bch_control *control; }; /* bch types */ @@ -253,21 +256,146 @@ struct nand_bch_priv { #define ECC_BCH8 1 #define ECC_BCH16 2 +/* GPMC ecc engine settings */ +#define BCH_WRAPMODE_1 1 /* BCH wrap mode 1 */ +#define BCH_WRAPMODE_6 6 /* BCH wrap mode 6 */ + /* BCH nibbles for diff bch levels */ #define NAND_ECC_HW_BCH ((uint8_t)(NAND_ECC_HW_OOB_FIRST) + 1) #define ECC_BCH4_NIBBLES 13 #define ECC_BCH8_NIBBLES 26 #define ECC_BCH16_NIBBLES 52 -static struct nand_ecclayout hw_bch8_nand_oob = GPMC_NAND_HW_BCH8_ECC_LAYOUT; - -static struct nand_bch_priv bch_priv = { +/* + * This can be a single instance cause all current users have only one NAND + * with nearly the same setup (BCH8, some with ELM and others with sw BCH + * library). + * When some users with other BCH strength will exists this have to change! + */ +static __maybe_unused struct nand_bch_priv bch_priv = { .mode = NAND_ECC_HW_BCH, .type = ECC_BCH8, - .nibbles = ECC_BCH8_NIBBLES + .nibbles = ECC_BCH8_NIBBLES, + .control = NULL }; /* + * omap_hwecc_init_bch - Initialize the BCH Hardware ECC for NAND flash in + * GPMC controller + * @mtd: MTD device structure + * @mode: Read/Write mode + */ +__maybe_unused +static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) +{ + uint32_t val; + uint32_t dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1; +#ifdef CONFIG_AM33XX + uint32_t unused_length = 0; +#endif + uint32_t wr_mode = BCH_WRAPMODE_6; + struct nand_bch_priv *bch = chip->priv; + + /* Clear the ecc result registers, select ecc reg as 1 */ + writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control); + +#ifdef CONFIG_AM33XX + wr_mode = BCH_WRAPMODE_1; + + switch (bch->nibbles) { + case ECC_BCH4_NIBBLES: + unused_length = 3; + break; + case ECC_BCH8_NIBBLES: + unused_length = 2; + break; + case ECC_BCH16_NIBBLES: + unused_length = 0; + break; + } + + /* + * This is ecc_size_config for ELM mode. + * Here we are using different settings for read and write access and + * also depending on BCH strength. + */ + switch (mode) { + case NAND_ECC_WRITE: + /* write access only setup eccsize1 config */ + val = ((unused_length + bch->nibbles) << 22); + break; + + case NAND_ECC_READ: + default: + /* + * by default eccsize0 selected for ecc1resultsize + * eccsize0 config. + */ + val = (bch->nibbles << 12); + /* eccsize1 config */ + val |= (unused_length << 22); + break; + } +#else + /* + * This ecc_size_config setting is for BCH sw library. + * + * Note: we only support BCH8 currently with BCH sw library! + * Should be really easy to adobt to BCH4, however some omap3 have + * flaws with BCH4. + * + * Here we are using wrapping mode 6 both for reading and writing, with: + * size0 = 0 (no additional protected byte in spare area) + * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) + */ + val = (32 << 22) | (0 << 12); +#endif + /* ecc size configuration */ + writel(val, &gpmc_cfg->ecc_size_config); + + /* + * Configure the ecc engine in gpmc + * We assume 512 Byte sector pages for access to NAND. + */ + val = (1 << 16); /* enable BCH mode */ + val |= (bch->type << 12); /* setup BCH type */ + val |= (wr_mode << 8); /* setup wrapping mode */ + val |= (dev_width << 7); /* setup device width (16 or 8 bit) */ + val |= (cs << 1); /* setup chip select to work on */ + debug("set ECC_CONFIG=0x%08x\n", val); + writel(val, &gpmc_cfg->ecc_config); +} + +/* + * omap_enable_ecc_bch - This function enables the bch h/w ecc functionality + * @mtd: MTD device structure + * @mode: Read/Write mode + */ +__maybe_unused +static void omap_enable_ecc_bch(struct mtd_info *mtd, int32_t mode) +{ + struct nand_chip *chip = mtd->priv; + + omap_hwecc_init_bch(chip, mode); + /* enable ecc */ + writel((readl(&gpmc_cfg->ecc_config) | 0x1), &gpmc_cfg->ecc_config); +} + +/* + * omap_ecc_disable - Disable H/W ECC calculation + * + * @mtd: MTD device structure + */ +static void __maybe_unused omap_ecc_disable(struct mtd_info *mtd) +{ + writel((readl(&gpmc_cfg->ecc_config) & ~0x1), &gpmc_cfg->ecc_config); +} + +/* + * BCH8 support (needs ELM and thus AM33xx-only) + */ +#ifdef CONFIG_AM33XX +/* * omap_read_bch8_result - Read BCH result for BCH8 level * * @mtd: MTD device structure @@ -306,18 +434,6 @@ static void omap_read_bch8_result(struct mtd_info *mtd, uint8_t big_endian, } /* - * omap_ecc_disable - Disable H/W ECC calculation - * - * @mtd: MTD device structure - * - */ -static void omap_ecc_disable(struct mtd_info *mtd) -{ - writel((readl(&gpmc_cfg->ecc_config) & ~0x1), - &gpmc_cfg->ecc_config); -} - -/* * omap_rotate_ecc_bch - Rotate the syndrome bytes * * @mtd: MTD device structure @@ -468,76 +584,6 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, return 0; } -/* - * omap_hwecc_init_bch - Initialize the BCH Hardware ECC for NAND flash in - * GPMC controller - * @mtd: MTD device structure - * @mode: Read/Write mode - */ -static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) -{ - uint32_t val, dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1; - uint32_t unused_length = 0; - struct nand_bch_priv *bch = chip->priv; - - switch (bch->nibbles) { - case ECC_BCH4_NIBBLES: - unused_length = 3; - break; - case ECC_BCH8_NIBBLES: - unused_length = 2; - break; - case ECC_BCH16_NIBBLES: - unused_length = 0; - break; - } - - /* Clear the ecc result registers, select ecc reg as 1 */ - writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control); - - switch (mode) { - case NAND_ECC_WRITE: - /* eccsize1 config */ - val = ((unused_length + bch->nibbles) << 22); - break; - - case NAND_ECC_READ: - default: - /* by default eccsize0 selected for ecc1resultsize */ - /* eccsize0 config */ - val = (bch->nibbles << 12); - /* eccsize1 config */ - val |= (unused_length << 22); - break; - } - /* ecc size configuration */ - writel(val, &gpmc_cfg->ecc_size_config); - /* by default 512bytes sector page is selected */ - /* set bch mode */ - val = (1 << 16); - /* bch4 / bch8 / bch16 */ - val |= (bch->type << 12); - /* set wrap mode to 1 */ - val |= (1 << 8); - val |= (dev_width << 7); - val |= (cs << 1); - writel(val, &gpmc_cfg->ecc_config); -} - -/* - * omap_enable_ecc_bch- This function enables the bch h/w ecc functionality - * @mtd: MTD device structure - * @mode: Read/Write mode - * - */ -static void omap_enable_ecc_bch(struct mtd_info *mtd, int32_t mode) -{ - struct nand_chip *chip = mtd->priv; - - omap_hwecc_init_bch(chip, mode); - /* enable ecc */ - writel((readl(&gpmc_cfg->ecc_config) | 0x1), &gpmc_cfg->ecc_config); -} /** * omap_read_page_bch - hardware ecc based page read function @@ -602,15 +648,137 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, } #endif /* CONFIG_AM33XX */ -#ifndef CONFIG_SPL_BUILD /* - * omap_nand_switch_ecc - switch the ECC operation b/w h/w ecc and s/w ecc. - * The default is to come up on s/w ecc + * OMAP3 BCH8 support (with BCH library) + */ +#ifdef CONFIG_NAND_OMAP_BCH8 +/* + * omap_calculate_ecc_bch - Read BCH ECC result * - * @hardware - 1 -switch to h/w ecc, 0 - s/w ecc + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed (unused here) + * @ecc: The ECC output buffer + */ +static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc) +{ + int ret = 0; + size_t i; + unsigned long nsectors, val1, val2, val3, val4; + + nsectors = ((readl(&gpmc_cfg->ecc_config) >> 4) & 0x7) + 1; + + for (i = 0; i < nsectors; i++) { + /* Read hw-computed remainder */ + val1 = readl(&gpmc_cfg->bch_result_0_3[i].bch_result_x[0]); + val2 = readl(&gpmc_cfg->bch_result_0_3[i].bch_result_x[1]); + val3 = readl(&gpmc_cfg->bch_result_0_3[i].bch_result_x[2]); + val4 = readl(&gpmc_cfg->bch_result_0_3[i].bch_result_x[3]); + + /* + * Add constant polynomial to remainder, in order to get an ecc + * sequence of 0xFFs for a buffer filled with 0xFFs. + */ + *ecc++ = 0xef ^ (val4 & 0xFF); + *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); + *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); + *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); + *ecc++ = 0xed ^ (val3 & 0xFF); + *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); + *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); + *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); + *ecc++ = 0x97 ^ (val2 & 0xFF); + *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); + *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); + *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); + *ecc++ = 0xb5 ^ (val1 & 0xFF); + } + + /* + * Stop reading anymore ECC vals and clear old results + * enable will be called if more reads are required + */ + omap_ecc_disable(mtd); + + return ret; +} + +/** + * omap_correct_data_bch - Decode received data and correct errors + * @mtd: MTD device structure + * @data: page data + * @read_ecc: ecc read from nand flash + * @calc_ecc: ecc read from HW ECC registers + */ +static int omap_correct_data_bch(struct mtd_info *mtd, u_char *data, + u_char *read_ecc, u_char *calc_ecc) +{ + int i, count; + /* cannot correct more than 8 errors */ + unsigned int errloc[8]; + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *chip_priv = chip->priv; + struct bch_control *bch = chip_priv->control; + + count = decode_bch(bch, NULL, 512, read_ecc, calc_ecc, NULL, errloc); + if (count > 0) { + /* correct errors */ + for (i = 0; i < count; i++) { + /* correct data only, not ecc bytes */ + if (errloc[i] < 8*512) + data[errloc[i]/8] ^= 1 << (errloc[i] & 7); + printf("corrected bitflip %u\n", errloc[i]); +#ifdef DEBUG + puts("read_ecc: "); + /* + * BCH8 have 13 bytes of ECC; BCH4 needs adoption + * here! + */ + for (i = 0; i < 13; i++) + printf("%02x ", read_ecc[i]); + puts("\n"); + puts("calc_ecc: "); + for (i = 0; i < 13; i++) + printf("%02x ", calc_ecc[i]); + puts("\n"); +#endif + } + } else if (count < 0) { + puts("ecc unrecoverable error\n"); + } + return count; +} + +/** + * omap_free_bch - Release BCH ecc resources + * @mtd: MTD device structure + */ +static void __maybe_unused omap_free_bch(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *chip_priv = chip->priv; + struct bch_control *bch = NULL; + + if (chip_priv) + bch = chip_priv->control; + + if (bch) { + free_bch(bch); + chip_priv->control = NULL; + } +} +#endif /* CONFIG_NAND_OMAP_BCH8 */ + +#ifndef CONFIG_SPL_BUILD +/* + * omap_nand_switch_ecc - switch the ECC operation between different engines + * (h/w and s/w) and different algorithms (hamming and BCHx) * + * @hardware - true if one of the HW engines should be used + * @eccstrength - the number of bits that could be corrected + * (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16) */ -void omap_nand_switch_ecc(int32_t hardware) +void omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) { struct nand_chip *nand; struct mtd_info *mtd; @@ -628,6 +796,7 @@ void omap_nand_switch_ecc(int32_t hardware) nand->options |= NAND_OWN_BUFFERS; /* Reset ecc interface */ + nand->ecc.mode = NAND_ECC_NONE; nand->ecc.read_page = NULL; nand->ecc.write_page = NULL; nand->ecc.read_oob = NULL; @@ -637,28 +806,35 @@ void omap_nand_switch_ecc(int32_t hardware) nand->ecc.calculate = NULL; /* Setup the ecc configurations again */ - if (hardware == 1) { - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_nand_oob; - nand->ecc.size = 512; - nand->ecc.bytes = 3; - nand->ecc.hwctl = omap_enable_hwecc; - nand->ecc.correct = omap_correct_data; - nand->ecc.calculate = omap_calculate_ecc; - omap_hwecc_init(nand); - printf("HW ECC selected\n"); + if (hardware) { + if (eccstrength == 1) { + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.layout = &hw_nand_oob; + nand->ecc.size = 512; + nand->ecc.bytes = 3; + nand->ecc.hwctl = omap_enable_hwecc; + nand->ecc.correct = omap_correct_data; + nand->ecc.calculate = omap_calculate_ecc; + omap_hwecc_init(nand); + printf("1-bit hamming HW ECC selected\n"); + } +#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) + else if (eccstrength == 8) { + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.layout = &hw_bch8_nand_oob; + nand->ecc.size = 512; #ifdef CONFIG_AM33XX - } else if (hardware == 2) { - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_bch8_nand_oob; - nand->ecc.size = 512; - nand->ecc.bytes = 14; - nand->ecc.read_page = omap_read_page_bch; - nand->ecc.hwctl = omap_enable_ecc_bch; - nand->ecc.correct = omap_correct_data_bch; - nand->ecc.calculate = omap_calculate_ecc_bch; - omap_hwecc_init_bch(nand, NAND_ECC_READ); - printf("HW BCH8 selected\n"); + nand->ecc.bytes = 14; + nand->ecc.read_page = omap_read_page_bch; +#else + nand->ecc.bytes = 13; +#endif + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch; + nand->ecc.calculate = omap_calculate_ecc_bch; + omap_hwecc_init_bch(nand, NAND_ECC_READ); + printf("8-bit BCH HW ECC selected\n"); + } #endif } else { nand->ecc.mode = NAND_ECC_SOFT; @@ -732,16 +908,28 @@ int board_nand_init(struct nand_chip *nand) nand->chip_delay = 100; +#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) #ifdef CONFIG_AM33XX + /* AM33xx uses the ELM */ /* required in case of BCH */ elm_init(); - +#else + /* + * Whereas other OMAP based SoC do not have the ELM, they use the BCH + * SW library. + */ + bch_priv.control = init_bch(13, 8, 0x201b /* hw polynominal */); + if (!bch_priv.control) { + puts("Could not init_bch()\n"); + return -ENODEV; + } +#endif /* BCH info that will be correct for SPL or overridden otherwise. */ nand->priv = &bch_priv; #endif /* Default ECC mode */ -#ifdef CONFIG_AM33XX +#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) nand->ecc.mode = NAND_ECC_HW; nand->ecc.layout = &hw_bch8_nand_oob; nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; @@ -749,7 +937,9 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.hwctl = omap_enable_ecc_bch; nand->ecc.correct = omap_correct_data_bch; nand->ecc.calculate = omap_calculate_ecc_bch; +#ifdef CONFIG_AM33XX nand->ecc.read_page = omap_read_page_bch; +#endif omap_hwecc_init_bch(nand, NAND_ECC_READ); #else #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC) diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c deleted file mode 100644 index 87f0341..0000000 --- a/drivers/mtd/nand/s3c64xx.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * (C) Copyright 2006 DENX Software Engineering - * - * Implementation for U-Boot 1.1.6 by Samsung - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#include <nand.h> -#include <linux/mtd/nand.h> - -#include <asm/arch/s3c6400.h> - -#include <asm/io.h> -#include <asm/errno.h> - -#define MAX_CHIPS 2 -static int nand_cs[MAX_CHIPS] = {0, 1}; - -#ifdef CONFIG_NAND_SPL -#define printf(arg...) do {} while (0) -#endif - -/* Nand flash definition values by jsgood */ -#ifdef S3C_NAND_DEBUG -/* - * Function to print out oob buffer for debugging - * Written by jsgood - */ -static void print_oob(const char *header, struct mtd_info *mtd) -{ - int i; - struct nand_chip *chip = mtd->priv; - - printf("%s:\t", header); - - for (i = 0; i < 64; i++) - printf("%02x ", chip->oob_poi[i]); - - printf("\n"); -} -#endif /* S3C_NAND_DEBUG */ - -static void s3c_nand_select_chip(struct mtd_info *mtd, int chip) -{ - int ctrl = readl(NFCONT); - - switch (chip) { - case -1: - ctrl |= 6; - break; - case 0: - ctrl &= ~2; - break; - case 1: - ctrl &= ~4; - break; - default: - return; - } - - writel(ctrl, NFCONT); -} - -/* - * Hardware specific access to control-lines function - * Written by jsgood - */ -static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_CLE) - this->IO_ADDR_W = (void __iomem *)NFCMMD; - else if (ctrl & NAND_ALE) - this->IO_ADDR_W = (void __iomem *)NFADDR; - else - this->IO_ADDR_W = (void __iomem *)NFDATA; - if (ctrl & NAND_NCE) - s3c_nand_select_chip(mtd, *(int *)this->priv); - else - s3c_nand_select_chip(mtd, -1); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -/* - * Function for checking device ready pin - * Written by jsgood - */ -static int s3c_nand_device_ready(struct mtd_info *mtdinfo) -{ - return !!(readl(NFSTAT) & NFSTAT_RnB); -} - -#ifdef CONFIG_SYS_S3C_NAND_HWECC -/* - * This function is called before encoding ecc codes to ready ecc engine. - * Written by jsgood - */ -static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode) -{ - u_long nfcont, nfconf; - - /* - * The original driver used 4-bit ECC for "new" MLC chips, i.e., for - * those with non-zero ID[3][3:2], which anyway only holds for ST - * (Numonyx) chips - */ - nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT; - - writel(nfconf, NFCONF); - - /* Initialize & unlock */ - nfcont = readl(NFCONT); - nfcont |= NFCONT_INITECC; - nfcont &= ~NFCONT_MECCLOCK; - - if (mode == NAND_ECC_WRITE) - nfcont |= NFCONT_ECC_ENC; - else if (mode == NAND_ECC_READ) - nfcont &= ~NFCONT_ECC_ENC; - - writel(nfcont, NFCONT); -} - -/* - * This function is called immediately after encoding ecc codes. - * This function returns encoded ecc codes. - * Written by jsgood - */ -static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, - u_char *ecc_code) -{ - u_long nfcont, nfmecc0; - - /* Lock */ - nfcont = readl(NFCONT); - nfcont |= NFCONT_MECCLOCK; - writel(nfcont, NFCONT); - - nfmecc0 = readl(NFMECC0); - - ecc_code[0] = nfmecc0 & 0xff; - ecc_code[1] = (nfmecc0 >> 8) & 0xff; - ecc_code[2] = (nfmecc0 >> 16) & 0xff; - ecc_code[3] = (nfmecc0 >> 24) & 0xff; - - return 0; -} - -/* - * This function determines whether read data is good or not. - * If SLC, must write ecc codes to controller before reading status bit. - * If MLC, status bit is already set, so only reading is needed. - * If status bit is good, return 0. - * If correctable errors occured, do that. - * If uncorrectable errors occured, return -1. - * Written by jsgood - */ -static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - int ret = -1; - u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr; - u_char err_type, repaired; - - /* SLC: Write ecc to compare */ - nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0]; - nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2]; - writel(nfmeccdata0, NFMECCDATA0); - writel(nfmeccdata1, NFMECCDATA1); - - /* Read ecc status */ - nfestat0 = readl(NFESTAT0); - err_type = nfestat0 & 0x3; - - switch (err_type) { - case 0: /* No error */ - ret = 0; - break; - - case 1: - /* - * 1 bit error (Correctable) - * (nfestat0 >> 7) & 0x7ff :error byte number - * (nfestat0 >> 4) & 0x7 :error bit number - */ - err_byte_addr = (nfestat0 >> 7) & 0x7ff; - repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7)); - - printf("S3C NAND: 1 bit error detected at byte %ld. " - "Correcting from 0x%02x to 0x%02x...OK\n", - err_byte_addr, dat[err_byte_addr], repaired); - - dat[err_byte_addr] = repaired; - - ret = 1; - break; - - case 2: /* Multiple error */ - case 3: /* ECC area error */ - printf("S3C NAND: ECC uncorrectable error detected. " - "Not correctable.\n"); - ret = -1; - break; - } - - return ret; -} -#endif /* CONFIG_SYS_S3C_NAND_HWECC */ - -/* - * Board-specific NAND initialization. The following members of the - * argument are board-specific (per include/linux/mtd/nand.h): - * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device - * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device - * - hwcontrol: hardwarespecific function for accesing control-lines - * - dev_ready: hardwarespecific function for accesing device ready/busy line - * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must - * only be provided if a hardware ECC is available - * - eccmode: mode of ecc, see defines - * - chip_delay: chip dependent delay for transfering data from array to - * read regs (tR) - * - options: various chip options. They can partly be set to inform - * nand_scan about special functionality. See the defines for further - * explanation - * Members with a "?" were not set in the merged testing-NAND branch, - * so they are not set here either. - */ -int board_nand_init(struct nand_chip *nand) -{ - static int chip_n; - - if (chip_n >= MAX_CHIPS) - return -ENODEV; - - NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6; - - nand->IO_ADDR_R = (void __iomem *)NFDATA; - nand->IO_ADDR_W = (void __iomem *)NFDATA; - nand->cmd_ctrl = s3c_nand_hwcontrol; - nand->dev_ready = s3c_nand_device_ready; - nand->select_chip = s3c_nand_select_chip; - nand->options = 0; -#ifdef CONFIG_NAND_SPL - nand->read_byte = nand_read_byte; - nand->write_buf = nand_write_buf; - nand->read_buf = nand_read_buf; -#endif - -#ifdef CONFIG_SYS_S3C_NAND_HWECC - nand->ecc.hwctl = s3c_nand_enable_hwecc; - nand->ecc.calculate = s3c_nand_calculate_ecc; - nand->ecc.correct = s3c_nand_correct_data; - - /* - * If you get more than 1 NAND-chip with different page-sizes on the - * board one day, it will get more complicated... - */ - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; -#else - nand->ecc.mode = NAND_ECC_SOFT; -#endif /* ! CONFIG_SYS_S3C_NAND_HWECC */ - - nand->priv = nand_cs + chip_n++; - - return 0; -} diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 1a7b40e..858e322 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -632,10 +632,6 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) int blockpage, found = 0; unsigned int i; -#ifdef CONFIG_S3C64XX - return 0; -#endif - if (ONENAND_IS_2PLANE(this)) blockpage = onenand_get_2x_blockpage(mtd, addr); else diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index 0d94ea5..5eb2b3a 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -1,5 +1,5 @@ /* - * S3C64XX/S5PC100 OneNAND driver at U-Boot + * S5PC100 OneNAND driver at U-Boot * * Copyright (C) 2008-2009 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> @@ -62,12 +62,7 @@ do { \ #define ONENAND_MAIN_SPARE_ACCESS 0x16 #define ONENAND_PIPELINE_READ 0x4000 -#if defined(CONFIG_S3C64XX) -#define MAP_00 (0x0 << 24) -#define MAP_01 (0x1 << 24) -#define MAP_10 (0x2 << 24) -#define MAP_11 (0x3 << 24) -#elif defined(CONFIG_S5P) +#if defined(CONFIG_S5P) #define MAP_00 (0x0 << 26) #define MAP_01 (0x1 << 26) #define MAP_10 (0x2 << 26) @@ -116,12 +111,7 @@ static void s3c_write_cmd(int value, unsigned int cmd) * return the buffer address on the memory device * It will be combined with CMD_MAP_XX */ -#if defined(CONFIG_S3C64XX) -static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) -{ - return (fba << 12) | (fpa << 6) | (fsa << 4); -} -#elif defined(CONFIG_S5P) +#if defined(CONFIG_S5P) static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) { return (fba << 13) | (fpa << 7) | (fsa << 5); @@ -550,45 +540,6 @@ static void s3c_onenand_unlock_all(struct mtd_info *mtd) s3c_onenand_check_lock_status(mtd); } -#ifdef CONFIG_S3C64XX -static void s3c_set_width_regs(struct onenand_chip *this) -{ - int dev_id, density; - int fba, fpa, fsa; - int dbs_dfs; - - dev_id = DEVICE_ID0_REG; - - density = (dev_id >> ONENAND_DEVICE_DENSITY_SHIFT) & 0xf; - dbs_dfs = !!(dev_id & ONENAND_DEVICE_IS_DDP); - - fba = density + 7; - if (dbs_dfs) - fba--; /* Decrease the fba */ - fpa = 6; - if (density >= ONENAND_DEVICE_DENSITY_512Mb) - fsa = 2; - else - fsa = 1; - - DPRINTK("FBA %lu, FPA %lu, FSA %lu, DDP %lu", - FBA_WIDTH0_REG, FPA_WIDTH0_REG, FSA_WIDTH0_REG, - DDP_DEVICE_REG); - - DPRINTK("mem_cfg0 0x%lx, sync mode %lu, " - "dev_page_size %lu, BURST LEN %lu", - MEM_CFG0_REG, SYNC_MODE_REG, - DEV_PAGE_SIZE_REG, BURST_LEN0_REG); - - DEV_PAGE_SIZE_REG = 0x1; - - FBA_WIDTH0_REG = fba; - FPA_WIDTH0_REG = fpa; - FSA_WIDTH0_REG = fsa; - DBS_DFS_WIDTH0_REG = dbs_dfs; -} -#endif - int s5pc110_chip_probe(struct mtd_info *mtd) { return 0; @@ -620,10 +571,7 @@ void s3c_onenand_init(struct mtd_info *mtd) onenand->mtd = mtd; -#if defined(CONFIG_S3C64XX) - onenand->base = (void *)0x70100000; - onenand->ahb_addr = (void *)0x20000000; -#elif defined(CONFIG_S5P) +#if defined(CONFIG_S5P) onenand->base = (void *)0xE7100000; onenand->ahb_addr = (void *)0xB0000000; #endif diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index de3f471..fbc4e97 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -35,7 +35,6 @@ COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o COBJS-$(CONFIG_MCFUART) += mcfuart.o COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o -COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_S5P) += serial_s5p.o COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index ed4e6b3..7f013ab 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -36,10 +36,24 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) { -#if (!defined(CONFIG_SYS_NS16550_BROKEN_TEMT)) +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX)) + /* + * On some OMAP3 devices when UART3 is configured for boot mode before + * SPL starts only THRE bit is set. We have to empty the transmitter + * before initialization starts. + */ + if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) + == UART_LSR_THRE) { + serial_out(UART_LCR_DLAB, &com_port->lcr); + serial_out(baud_divisor & 0xff, &com_port->dll); + serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); + serial_out(UART_LCRVAL, &com_port->lcr); + serial_out(0, &com_port->mdr1); + } +#endif + while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT)) ; -#endif serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c deleted file mode 100644 index b590992..0000000 --- a/drivers/serial/s3c64xx.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <linux/compiler.h> -#include <serial.h> -#include <asm/arch/s3c6400.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SERIAL1 -#define UART_NR S3C64XX_UART0 - -#elif defined(CONFIG_SERIAL2) -#define UART_NR S3C64XX_UART1 - -#elif defined(CONFIG_SERIAL3) -#define UART_NR S3C64XX_UART2 - -#else -#error "Bad: you didn't configure serial ..." -#endif - -/* - * The coefficient, used to calculate the baudrate on S3C6400 UARTs is - * calculated as - * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT - * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1, - * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants: - */ -static const int udivslot[] = { - 0, - 0x0080, - 0x0808, - 0x0888, - 0x2222, - 0x4924, - 0x4a52, - 0x54aa, - 0x5555, - 0xd555, - 0xd5d5, - 0xddd5, - 0xdddd, - 0xdfdd, - 0xdfdf, - 0xffdf, -}; - -static void s3c64xx_serial_setbrg(void) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - u32 pclk = get_PCLK(); - u32 baudrate = gd->baudrate; - int i; - - i = (pclk / baudrate) % 16; - - uart->UBRDIV = pclk / baudrate / 16 - 1; - uart->UDIVSLOT = udivslot[i]; - - for (i = 0; i < 100; i++) - barrier(); -} - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static int s3c64xx_serial_init(void) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - - /* reset and enable FIFOs, set triggers to the maximum */ - uart->UFCON = 0xff; - uart->UMCON = 0; - /* 8N1 */ - uart->ULCON = 3; - /* No interrupts, no DMA, pure polling */ - uart->UCON = 5; - - serial_setbrg(); - - return 0; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int s3c64xx_serial_getc(void) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - - /* wait for character to arrive */ - while (!(uart->UTRSTAT & 0x1)); - - return uart->URXH & 0xff; -} - -#ifdef CONFIG_MODEM_SUPPORT -static int be_quiet; -void disable_putc(void) -{ - be_quiet = 1; -} - -void enable_putc(void) -{ - be_quiet = 0; -} -#endif - - -/* - * Output a single byte to the serial port. - */ -static void s3c64xx_serial_putc(const char c) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - -#ifdef CONFIG_MODEM_SUPPORT - if (be_quiet) - return; -#endif - - /* wait for room in the tx FIFO */ - while (!(uart->UTRSTAT & 0x2)); - - uart->UTXH = c; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc('\r'); -} - -/* - * Test whether a character is in the RX buffer - */ -static int s3c64xx_serial_tstc(void) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - - return uart->UTRSTAT & 0x1; -} - -static struct serial_device s3c64xx_serial_drv = { - .name = "s3c64xx_serial", - .start = s3c64xx_serial_init, - .stop = NULL, - .setbrg = s3c64xx_serial_setbrg, - .putc = s3c64xx_serial_putc, - .puts = default_serial_puts, - .getc = s3c64xx_serial_getc, - .tstc = s3c64xx_serial_tstc, -}; - -void s3c64xx_serial_initialize(void) -{ - serial_register(&s3c64xx_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &s3c64xx_serial_drv; -} diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 7922bf0..9f04643 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -165,7 +165,6 @@ serial_initfunc(atmel_serial_initialize); serial_initfunc(lpc32xx_serial_initialize); serial_initfunc(mcf_serial_initialize); serial_initfunc(oc_serial_initialize); -serial_initfunc(s3c64xx_serial_initialize); serial_initfunc(sandbox_serial_initialize); serial_initfunc(clps7111_serial_initialize); serial_initfunc(imx_serial_initialize); @@ -259,7 +258,6 @@ void serial_initialize(void) lpc32xx_serial_initialize(); mcf_serial_initialize(); oc_serial_initialize(); - s3c64xx_serial_initialize(); sandbox_serial_initialize(); clps7111_serial_initialize(); imx_serial_initialize(); diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c index 51b3d30..607e1cd 100644 --- a/drivers/spi/exynos_spi.c +++ b/drivers/spi/exynos_spi.c @@ -358,6 +358,7 @@ static inline struct exynos_spi *get_spi_base(int dev_index) * @param bus SPI bus structure to fill with information * @return 0 if ok, or -FDT_ERR_NOTFOUND if something was missing */ +#ifdef CONFIG_OF_CONTROL static int spi_get_config(const void *blob, int node, struct spi_bus *bus) { bus->node = node; @@ -413,6 +414,7 @@ static int process_nodes(const void *blob, int node_list[], int count) return 0; } +#endif /* Sadly there is no error return from this function */ void spi_init(void) diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index d792d8d..5bed858 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -137,11 +137,15 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, return -1; } - reg_ctrl = reg_read(®s->ctrl); - - /* Reset spi */ - reg_write(®s->ctrl, (reg_ctrl & ~MXC_CSPICTRL_EN)); - reg_write(®s->ctrl, (reg_ctrl | MXC_CSPICTRL_EN)); + /* + * Reset SPI and set all CSs to master mode, if toggling + * between slave and master mode we might see a glitch + * on the clock line + */ + reg_ctrl = MXC_CSPICTRL_MODE_MASK; + reg_write(®s->ctrl, reg_ctrl); + reg_ctrl |= MXC_CSPICTRL_EN; + reg_write(®s->ctrl, reg_ctrl); /* * The following computation is taken directly from Freescale's code. @@ -174,9 +178,6 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_POSTDIV(0x0F)) | MXC_CSPICTRL_POSTDIV(post_div); - /* always set to master mode */ - reg_ctrl |= 1 << (cs + 4); - /* We need to disable SPI before changing registers */ reg_ctrl &= ~MXC_CSPICTRL_EN; diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 9a6f982..87a5970 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -31,7 +31,6 @@ COBJS-$(CONFIG_USB_ATMEL) += ohci-at91.o COBJS-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o -COBJS-$(CONFIG_USB_S3C64XX) += s3c64xx-hcd.o COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o COBJS-$(CONFIG_USB_OHCI_S3C24XX) += ohci-s3c24xx.o diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index bdbe250..bc17b85 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -66,7 +66,6 @@ #if defined(CONFIG_ARM920T) || \ defined(CONFIG_S3C24X0) || \ - defined(CONFIG_S3C6400) || \ defined(CONFIG_440EP) || \ defined(CONFIG_PCI_OHCI) || \ defined(CONFIG_MPC5200) || \ diff --git a/drivers/usb/host/s3c64xx-hcd.c b/drivers/usb/host/s3c64xx-hcd.c deleted file mode 100644 index cd295da..0000000 --- a/drivers/usb/host/s3c64xx-hcd.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * URB OHCI HCD (Host Controller Driver) initialization for USB on the S3C64XX. - * - * Copyright (C) 2008, - * Guennadi Liakhovetski, DENX Software Engineering <lg@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/arch/s3c6400.h> - -int usb_cpu_init(void) -{ - OTHERS_REG |= 0x10000; - return 0; -} - -int usb_cpu_stop(void) -{ - OTHERS_REG &= ~0x10000; - return 0; -} - -void usb_cpu_init_fail(void) -{ - OTHERS_REG &= ~0x10000; -} diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c index 040a5c0..da93571 100644 --- a/drivers/usb/musb-new/musb_core.c +++ b/drivers/usb/musb-new/musb_core.c @@ -943,7 +943,9 @@ void musb_start(struct musb *musb) /* put into basic highspeed mode and start session */ musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE +#ifdef CONFIG_USB_GADGET_DUALSPEED | MUSB_POWER_HSENAB +#endif /* ENSUSPEND wedges tusb */ /* | MUSB_POWER_ENSUSPEND */ ); @@ -1421,6 +1423,7 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb) strcat(aInfo, ", dyn FIFOs"); musb->dyn_fifo = true; } +#ifndef CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT if (reg & MUSB_CONFIGDATA_MPRXE) { strcat(aInfo, ", bulk combine"); musb->bulk_combine = true; @@ -1429,6 +1432,10 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb) strcat(aInfo, ", bulk split"); musb->bulk_split = true; } +#else + musb->bulk_combine = false; + musb->bulk_split = false; +#endif if (reg & MUSB_CONFIGDATA_HBRXE) { strcat(aInfo, ", HB-ISO Rx"); musb->hb_iso_rx = true; diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c index 762cbc1..15d2ec0 100644 --- a/drivers/usb/musb-new/musb_uboot.c +++ b/drivers/usb/musb-new/musb_uboot.c @@ -174,7 +174,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) { int ret; - if (!driver || driver->speed < USB_SPEED_HIGH || !driver->bind || + if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind || !driver->setup) { printf("bad parameter.\n"); return -EINVAL; diff --git a/drivers/video/exynos_dp.c b/drivers/video/exynos_dp.c index d72fa56..87bb907 100644 --- a/drivers/video/exynos_dp.c +++ b/drivers/video/exynos_dp.c @@ -27,11 +27,21 @@ #include <asm/arch/cpu.h> #include <asm/arch/dp_info.h> #include <asm/arch/dp.h> +#include <fdtdec.h> +#include <libfdt.h> #include "exynos_dp_lowlevel.h" +DECLARE_GLOBAL_DATA_PTR; + static struct exynos_dp_platform_data *dp_pd; +void __exynos_set_dp_phy(unsigned int onoff) +{ +} +void exynos_set_dp_phy(unsigned int onoff) + __attribute__((weak, alias("__exynos_set_dp_phy"))); + static void exynos_dp_disp_info(struct edp_disp_info *disp_info) { disp_info->h_total = disp_info->h_res + disp_info->h_sync_width + @@ -853,6 +863,62 @@ static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info) return ret; } +#ifdef CONFIG_OF_CONTROL +int exynos_dp_parse_dt(const void *blob, struct edp_device_info *edp_info) +{ + unsigned int node = fdtdec_next_compatible(blob, 0, + COMPAT_SAMSUNG_EXYNOS5_DP); + if (node <= 0) { + debug("exynos_dp: Can't get device node for dp\n"); + return -ENODEV; + } + + edp_info->disp_info.h_res = fdtdec_get_int(blob, node, + "samsung,h-res", 0); + edp_info->disp_info.h_sync_width = fdtdec_get_int(blob, node, + "samsung,h-sync-width", 0); + edp_info->disp_info.h_back_porch = fdtdec_get_int(blob, node, + "samsung,h-back-porch", 0); + edp_info->disp_info.h_front_porch = fdtdec_get_int(blob, node, + "samsung,h-front-porch", 0); + edp_info->disp_info.v_res = fdtdec_get_int(blob, node, + "samsung,v-res", 0); + edp_info->disp_info.v_sync_width = fdtdec_get_int(blob, node, + "samsung,v-sync-width", 0); + edp_info->disp_info.v_back_porch = fdtdec_get_int(blob, node, + "samsung,v-back-porch", 0); + edp_info->disp_info.v_front_porch = fdtdec_get_int(blob, node, + "samsung,v-front-porch", 0); + edp_info->disp_info.v_sync_rate = fdtdec_get_int(blob, node, + "samsung,v-sync-rate", 0); + + edp_info->lt_info.lt_status = fdtdec_get_int(blob, node, + "samsung,lt-status", 0); + + edp_info->video_info.master_mode = fdtdec_get_int(blob, node, + "samsung,master-mode", 0); + edp_info->video_info.bist_mode = fdtdec_get_int(blob, node, + "samsung,bist-mode", 0); + edp_info->video_info.bist_pattern = fdtdec_get_int(blob, node, + "samsung,bist-pattern", 0); + edp_info->video_info.h_sync_polarity = fdtdec_get_int(blob, node, + "samsung,h-sync-polarity", 0); + edp_info->video_info.v_sync_polarity = fdtdec_get_int(blob, node, + "samsung,v-sync-polarity", 0); + edp_info->video_info.interlaced = fdtdec_get_int(blob, node, + "samsung,interlaced", 0); + edp_info->video_info.color_space = fdtdec_get_int(blob, node, + "samsung,color-space", 0); + edp_info->video_info.dynamic_range = fdtdec_get_int(blob, node, + "samsung,dynamic-range", 0); + edp_info->video_info.ycbcr_coeff = fdtdec_get_int(blob, node, + "samsung,ycbcr-coeff", 0); + edp_info->video_info.color_depth = fdtdec_get_int(blob, node, + "samsung,color-depth", 0); + return 0; +} +#endif + unsigned int exynos_init_dp(void) { unsigned int ret; @@ -864,16 +930,22 @@ unsigned int exynos_init_dp(void) return -EFAULT; } +#ifdef CONFIG_OF_CONTROL + if (exynos_dp_parse_dt(gd->fdt_blob, edp_info)) + debug("unable to parse DP DT node\n"); +#else edp_info = dp_pd->edp_dev_info; if (edp_info == NULL) { debug("failed to get edp_info data.\n"); return -EFAULT; } +#endif + + exynos_dp_set_base_addr(); exynos_dp_disp_info(&edp_info->disp_info); - if (dp_pd->phy_enable) - dp_pd->phy_enable(1); + exynos_set_dp_phy(1); ret = exynos_dp_init_dp(); if (ret != EXYNOS_DP_SUCCESS) { diff --git a/drivers/video/exynos_dp_lowlevel.c b/drivers/video/exynos_dp_lowlevel.c index 7b54c80..748d9b8 100644 --- a/drivers/video/exynos_dp_lowlevel.c +++ b/drivers/video/exynos_dp_lowlevel.c @@ -25,11 +25,34 @@ #include <asm/arch/cpu.h> #include <asm/arch/dp_info.h> #include <asm/arch/dp.h> +#include <fdtdec.h> +#include <libfdt.h> + +/* Declare global data pointer */ +DECLARE_GLOBAL_DATA_PTR; + +struct exynos_dp *dp_regs; + +void exynos_dp_set_base_addr(void) +{ +#ifdef CONFIG_OF_CONTROL + unsigned int node = fdtdec_next_compatible(gd->fdt_blob, + 0, COMPAT_SAMSUNG_EXYNOS5_DP); + if (node <= 0) + debug("exynos_dp: Can't get device node for dp\n"); + + dp_regs = (struct exynos_dp *)fdtdec_get_addr(gd->fdt_blob, + node, "reg"); + if (dp_regs == NULL) + debug("Can't get the DP base address\n"); +#else + dp_regs = (struct exynos_dp *)samsung_get_base_dp(); +#endif +} static void exynos_dp_enable_video_input(unsigned int enable) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->video_ctl1); reg &= ~VIDEO_EN_MASK; @@ -47,7 +70,6 @@ void exynos_dp_enable_video_bist(unsigned int enable) { /*enable video bist*/ unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->video_ctl4); reg &= ~VIDEO_BIST_MASK; @@ -64,7 +86,6 @@ void exynos_dp_enable_video_bist(unsigned int enable) void exynos_dp_enable_video_mute(unsigned int enable) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->video_ctl1); reg &= ~(VIDEO_MUTE_MASK); @@ -80,7 +101,6 @@ void exynos_dp_enable_video_mute(unsigned int enable) static void exynos_dp_init_analog_param(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* * Set termination @@ -129,7 +149,6 @@ static void exynos_dp_init_analog_param(void) static void exynos_dp_init_interrupt(void) { - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Set interrupt registers to initial states */ /* @@ -158,7 +177,6 @@ static void exynos_dp_init_interrupt(void) void exynos_dp_reset(void) { unsigned int reg_func_1; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /*dp tx sw reset*/ writel(RESET_DP_TX, &dp_regs->tx_sw_reset); @@ -186,7 +204,6 @@ void exynos_dp_reset(void) void exynos_dp_enable_sw_func(unsigned int enable) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->func_en1); reg &= ~(SW_FUNC_EN_N); @@ -202,7 +219,6 @@ void exynos_dp_enable_sw_func(unsigned int enable) unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->phy_pd); switch (block) { @@ -256,7 +272,6 @@ unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable) unsigned int exynos_dp_get_pll_lock_status(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->debug_ctl); @@ -269,7 +284,6 @@ unsigned int exynos_dp_get_pll_lock_status(void) static void exynos_dp_set_pll_power(unsigned int enable) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->pll_ctl); reg &= ~(DP_PLL_PD); @@ -285,7 +299,6 @@ int exynos_dp_init_analog_func(void) int ret = EXYNOS_DP_SUCCESS; unsigned int retry_cnt = 10; unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /*Power On All Analog block */ exynos_dp_set_analog_power_down(POWER_ALL, DP_DISABLE); @@ -335,7 +348,6 @@ int exynos_dp_init_analog_func(void) void exynos_dp_init_hpd(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Clear interrupts releated to Hot Plug Dectect */ reg = HOTPLUG_CHG | HPD_LOST | PLUG; @@ -354,7 +366,6 @@ void exynos_dp_init_hpd(void) static inline void exynos_dp_reset_aux(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Disable AUX channel module */ reg = readl(&dp_regs->func_en2); @@ -367,7 +378,6 @@ static inline void exynos_dp_reset_aux(void) void exynos_dp_init_aux(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Clear inerrupts related to AUX channel */ reg = RPLY_RECEIV | AUX_ERR; @@ -395,7 +405,6 @@ void exynos_dp_init_aux(void) void exynos_dp_config_interrupt(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* 0: mask, 1: unmask */ reg = COMMON_INT_MASK_1; @@ -419,7 +428,6 @@ void exynos_dp_config_interrupt(void) unsigned int exynos_dp_get_plug_in_status(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->sys_ctl3); if (reg & HPD_STATUS) @@ -449,7 +457,6 @@ unsigned int exynos_dp_start_aux_transaction(void) unsigned int reg; unsigned int ret = 0; unsigned int retry_cnt; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Enable AUX CH operation */ reg = readl(&dp_regs->aux_ch_ctl2); @@ -498,7 +505,6 @@ unsigned int exynos_dp_write_byte_to_dpcd(unsigned int reg_addr, unsigned char data) { unsigned int reg, ret; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Clear AUX CH data buffer */ reg = BUF_CLR; @@ -539,7 +545,6 @@ unsigned int exynos_dp_read_byte_from_dpcd(unsigned int reg_addr, { unsigned int reg; int retval; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Clear AUX CH data buffer */ reg = BUF_CLR; @@ -583,7 +588,6 @@ unsigned int exynos_dp_write_bytes_to_dpcd(unsigned int reg_addr, unsigned int cur_data_idx; unsigned int retry_cnt; unsigned int ret = 0; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Clear AUX CH data buffer */ reg = BUF_CLR; @@ -649,7 +653,6 @@ unsigned int exynos_dp_read_bytes_from_dpcd(unsigned int reg_addr, unsigned int cur_data_idx; unsigned int retry_cnt; unsigned int ret = 0; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Clear AUX CH data buffer */ reg = BUF_CLR; @@ -711,7 +714,6 @@ int exynos_dp_select_i2c_device(unsigned int device_addr, { unsigned int reg; int retval; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Set EDID device address */ reg = device_addr; @@ -746,7 +748,6 @@ int exynos_dp_read_byte_from_i2c(unsigned int device_addr, unsigned int reg; int i; int retval; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); for (i = 0; i < 10; i++) { /* Clear AUX CH data buffer */ @@ -790,7 +791,6 @@ int exynos_dp_read_bytes_from_i2c(unsigned int device_addr, unsigned int cur_data_idx; unsigned int defer = 0; int retval = 0; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); for (i = 0; i < count; i += 16) { /* use 16 burst */ for (j = 0; j < 100; j++) { @@ -854,7 +854,6 @@ int exynos_dp_read_bytes_from_i2c(unsigned int device_addr, void exynos_dp_reset_macro(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->phy_test); reg |= MACRO_RST; @@ -870,7 +869,6 @@ void exynos_dp_reset_macro(void) void exynos_dp_set_link_bandwidth(unsigned char bwtype) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = (unsigned int)bwtype; @@ -883,7 +881,6 @@ unsigned char exynos_dp_get_link_bandwidth(void) { unsigned char ret; unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->link_bw_set); ret = (unsigned char)reg; @@ -894,7 +891,6 @@ unsigned char exynos_dp_get_link_bandwidth(void) void exynos_dp_set_lane_count(unsigned char count) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = (unsigned int)count; @@ -906,7 +902,6 @@ void exynos_dp_set_lane_count(unsigned char count) unsigned int exynos_dp_get_lane_count(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->lane_count_set); @@ -915,7 +910,6 @@ unsigned int exynos_dp_get_lane_count(void) unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt) { - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); unsigned int reg_list[DP_LANE_CNT_4] = { (unsigned int)&dp_regs->ln0_link_training_ctl, (unsigned int)&dp_regs->ln1_link_training_ctl, @@ -929,7 +923,6 @@ unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt) void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val, unsigned char lanecnt) { - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); unsigned int reg_list[DP_LANE_CNT_4] = { (unsigned int)&dp_regs->ln0_link_training_ctl, (unsigned int)&dp_regs->ln1_link_training_ctl, @@ -944,7 +937,6 @@ void exynos_dp_set_lane_pre_emphasis(unsigned int level, unsigned char lanecnt) { unsigned char i; unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); unsigned int reg_list[DP_LANE_CNT_4] = { (unsigned int)&dp_regs->ln0_link_training_ctl, (unsigned int)&dp_regs->ln1_link_training_ctl, @@ -967,7 +959,6 @@ void exynos_dp_set_lane_pre_emphasis(unsigned int level, unsigned char lanecnt) void exynos_dp_set_training_pattern(unsigned int pattern) { unsigned int reg = 0; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); switch (pattern) { case PRBS7: @@ -996,7 +987,6 @@ void exynos_dp_set_training_pattern(unsigned int pattern) void exynos_dp_enable_enhanced_mode(unsigned char enable) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->sys_ctl4); reg &= ~ENHANCED; @@ -1010,7 +1000,6 @@ void exynos_dp_enable_enhanced_mode(unsigned char enable) void exynos_dp_enable_scrambling(unsigned int enable) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->training_ptn_set); reg &= ~(SCRAMBLING_DISABLE); @@ -1024,7 +1013,6 @@ void exynos_dp_enable_scrambling(unsigned int enable) int exynos_dp_init_video(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Clear VID_CLK_CHG[1] and VID_FORMAT_CHG[3] and VSYNC_DET[7] */ reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; @@ -1040,7 +1028,6 @@ int exynos_dp_init_video(void) void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Video Slave mode setting */ reg = readl(&dp_regs->func_en1); @@ -1074,7 +1061,6 @@ void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info) void exynos_dp_set_video_color_format(struct edp_video_info *video_info) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Configure the input color depth, color space, dynamic range */ reg = (video_info->dynamic_range << IN_D_RANGE_SHIFT) | @@ -1097,7 +1083,6 @@ int exynos_dp_config_video_bist(struct edp_device_info *edp_info) unsigned int reg; unsigned int bist_type = 0; struct edp_video_info video_info = edp_info->video_info; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* For master mode, you don't need to set the video format */ if (video_info.master_mode == 0) { @@ -1186,7 +1171,6 @@ int exynos_dp_config_video_bist(struct edp_device_info *edp_info) unsigned int exynos_dp_is_slave_video_stream_clock_on(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Update Video stream clk detect status */ reg = readl(&dp_regs->sys_ctl1); @@ -1206,7 +1190,6 @@ void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, unsigned int n_value) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); if (type == REGISTER_M) { reg = readl(&dp_regs->sys_ctl4); @@ -1235,7 +1218,6 @@ void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, void exynos_dp_set_video_timing_mode(unsigned int type) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->video_ctl10); reg &= ~FORMAT_SEL; @@ -1249,7 +1231,6 @@ void exynos_dp_set_video_timing_mode(unsigned int type) void exynos_dp_enable_video_master(unsigned int enable) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); reg = readl(&dp_regs->soc_general_ctl); if (enable) { @@ -1266,7 +1247,6 @@ void exynos_dp_enable_video_master(unsigned int enable) void exynos_dp_start_video(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Enable Video input and disable Mute */ reg = readl(&dp_regs->video_ctl1); @@ -1277,7 +1257,6 @@ void exynos_dp_start_video(void) unsigned int exynos_dp_is_video_stream_on(void) { unsigned int reg; - struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); /* Update STRM_VALID */ reg = readl(&dp_regs->sys_ctl3); diff --git a/drivers/video/exynos_dp_lowlevel.h b/drivers/video/exynos_dp_lowlevel.h index a041a7a..2c0ae12 100644 --- a/drivers/video/exynos_dp_lowlevel.h +++ b/drivers/video/exynos_dp_lowlevel.h @@ -76,5 +76,6 @@ void exynos_dp_set_video_timing_mode(unsigned int type); void exynos_dp_enable_video_master(unsigned int enable); void exynos_dp_start_video(void); unsigned int exynos_dp_is_video_stream_on(void); +void exynos_dp_set_base_addr(void); #endif /* _EXYNOS_DP_LOWLEVEL_H */ diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index c0f1830..ed0823b 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -23,6 +23,8 @@ #include <config.h> #include <common.h> #include <lcd.h> +#include <fdtdec.h> +#include <libfdt.h> #include <asm/io.h> #include <asm/arch/cpu.h> #include <asm/arch/clock.h> @@ -30,6 +32,7 @@ #include <asm/arch/mipi_dsim.h> #include <asm/arch/dp_info.h> #include <asm/arch/system.h> +#include <asm-generic/errno.h> #include "exynos_fb.h" @@ -37,6 +40,20 @@ DECLARE_GLOBAL_DATA_PTR; static unsigned int panel_width, panel_height; +/* + * board_init_f(arch/arm/lib/board.c) calls lcd_setmem() which needs + * panel_info.vl_col, panel_info.vl_row and panel_info.vl_bpix to reserve + * FB memory at a very early stage, i.e even before exynos_fimd_parse_dt() + * is called. So, we are forced to statically assign it. + */ +#ifdef CONFIG_OF_CONTROL +vidinfo_t panel_info = { + .vl_col = LCD_XRES, + .vl_row = LCD_YRES, + .vl_bpix = LCD_COLOR16, +}; +#endif + static void exynos_lcd_init_mem(void *lcdbase, vidinfo_t *vid) { unsigned long palette_size; @@ -83,47 +100,226 @@ static void draw_logo(void) } #endif +void __exynos_cfg_lcd_gpio(void) +{ +} +void exynos_cfg_lcd_gpio(void) + __attribute__((weak, alias("__exynos_cfg_lcd_gpio"))); + +void __exynos_backlight_on(unsigned int onoff) +{ +} +void exynos_backlight_on(unsigned int onoff) + __attribute__((weak, alias("__exynos_cfg_lcd_gpio"))); + +void __exynos_reset_lcd(void) +{ +} +void exynos_reset_lcd(void) + __attribute__((weak, alias("__exynos_reset_lcd"))); + +void __exynos_lcd_power_on(void) +{ +} +void exynos_lcd_power_on(void) + __attribute__((weak, alias("__exynos_lcd_power_on"))); + +void __exynos_cfg_ldo(void) +{ +} +void exynos_cfg_ldo(void) + __attribute__((weak, alias("__exynos_cfg_ldo"))); + +void __exynos_enable_ldo(unsigned int onoff) +{ +} +void exynos_enable_ldo(unsigned int onoff) + __attribute__((weak, alias("__exynos_enable_ldo"))); + +void __exynos_backlight_reset(void) +{ +} +void exynos_backlight_reset(void) + __attribute__((weak, alias("__exynos_backlight_reset"))); + static void lcd_panel_on(vidinfo_t *vid) { udelay(vid->init_delay); - if (vid->backlight_reset) - vid->backlight_reset(); + exynos_backlight_reset(); - if (vid->cfg_gpio) - vid->cfg_gpio(); + exynos_cfg_lcd_gpio(); - if (vid->lcd_power_on) - vid->lcd_power_on(); + exynos_lcd_power_on(); udelay(vid->power_on_delay); if (vid->dp_enabled) exynos_init_dp(); - if (vid->reset_lcd) { - vid->reset_lcd(); - udelay(vid->reset_delay); - } + exynos_reset_lcd(); + + udelay(vid->reset_delay); - if (vid->backlight_on) - vid->backlight_on(1); + exynos_backlight_on(1); - if (vid->cfg_ldo) - vid->cfg_ldo(); + exynos_cfg_ldo(); - if (vid->enable_ldo) - vid->enable_ldo(1); + exynos_enable_ldo(1); if (vid->mipi_enabled) exynos_mipi_dsi_init(); } +#ifdef CONFIG_OF_CONTROL +int exynos_fimd_parse_dt(const void *blob) +{ + unsigned int node; + node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_FIMD); + if (node <= 0) { + debug("exynos_fb: Can't get device node for fimd\n"); + return -ENODEV; + } + + panel_info.vl_col = fdtdec_get_int(blob, node, "samsung,vl-col", 0); + if (panel_info.vl_col == 0) { + debug("Can't get XRES\n"); + return -ENXIO; + } + + panel_info.vl_row = fdtdec_get_int(blob, node, "samsung,vl-row", 0); + if (panel_info.vl_row == 0) { + debug("Can't get YRES\n"); + return -ENXIO; + } + + panel_info.vl_width = fdtdec_get_int(blob, node, + "samsung,vl-width", 0); + + panel_info.vl_height = fdtdec_get_int(blob, node, + "samsung,vl-height", 0); + + panel_info.vl_freq = fdtdec_get_int(blob, node, "samsung,vl-freq", 0); + if (panel_info.vl_freq == 0) { + debug("Can't get refresh rate\n"); + return -ENXIO; + } + + if (fdtdec_get_bool(blob, node, "samsung,vl-clkp")) + panel_info.vl_clkp = CONFIG_SYS_LOW; + + if (fdtdec_get_bool(blob, node, "samsung,vl-oep")) + panel_info.vl_oep = CONFIG_SYS_LOW; + + if (fdtdec_get_bool(blob, node, "samsung,vl-hsp")) + panel_info.vl_hsp = CONFIG_SYS_LOW; + + if (fdtdec_get_bool(blob, node, "samsung,vl-vsp")) + panel_info.vl_vsp = CONFIG_SYS_LOW; + + if (fdtdec_get_bool(blob, node, "samsung,vl-dp")) + panel_info.vl_dp = CONFIG_SYS_LOW; + + panel_info.vl_bpix = fdtdec_get_int(blob, node, "samsung,vl-bpix", 0); + if (panel_info.vl_bpix == 0) { + debug("Can't get bits per pixel\n"); + return -ENXIO; + } + + panel_info.vl_hspw = fdtdec_get_int(blob, node, "samsung,vl-hspw", 0); + if (panel_info.vl_hspw == 0) { + debug("Can't get hsync width\n"); + return -ENXIO; + } + + panel_info.vl_hfpd = fdtdec_get_int(blob, node, "samsung,vl-hfpd", 0); + if (panel_info.vl_hfpd == 0) { + debug("Can't get right margin\n"); + return -ENXIO; + } + + panel_info.vl_hbpd = (u_char)fdtdec_get_int(blob, node, + "samsung,vl-hbpd", 0); + if (panel_info.vl_hbpd == 0) { + debug("Can't get left margin\n"); + return -ENXIO; + } + + panel_info.vl_vspw = (u_char)fdtdec_get_int(blob, node, + "samsung,vl-vspw", 0); + if (panel_info.vl_vspw == 0) { + debug("Can't get vsync width\n"); + return -ENXIO; + } + + panel_info.vl_vfpd = fdtdec_get_int(blob, node, + "samsung,vl-vfpd", 0); + if (panel_info.vl_vfpd == 0) { + debug("Can't get lower margin\n"); + return -ENXIO; + } + + panel_info.vl_vbpd = fdtdec_get_int(blob, node, "samsung,vl-vbpd", 0); + if (panel_info.vl_vbpd == 0) { + debug("Can't get upper margin\n"); + return -ENXIO; + } + + panel_info.vl_cmd_allow_len = fdtdec_get_int(blob, node, + "samsung,vl-cmd-allow-len", 0); + + panel_info.win_id = fdtdec_get_int(blob, node, "samsung,winid", 0); + panel_info.init_delay = fdtdec_get_int(blob, node, + "samsung,init-delay", 0); + panel_info.power_on_delay = fdtdec_get_int(blob, node, + "samsung,power-on-delay", 0); + panel_info.reset_delay = fdtdec_get_int(blob, node, + "samsung,reset-delay", 0); + panel_info.interface_mode = fdtdec_get_int(blob, node, + "samsung,interface-mode", 0); + panel_info.mipi_enabled = fdtdec_get_int(blob, node, + "samsung,mipi-enabled", 0); + panel_info.dp_enabled = fdtdec_get_int(blob, node, + "samsung,dp-enabled", 0); + panel_info.cs_setup = fdtdec_get_int(blob, node, + "samsung,cs-setup", 0); + panel_info.wr_setup = fdtdec_get_int(blob, node, + "samsung,wr-setup", 0); + panel_info.wr_act = fdtdec_get_int(blob, node, "samsung,wr-act", 0); + panel_info.wr_hold = fdtdec_get_int(blob, node, "samsung,wr-hold", 0); + + panel_info.logo_on = fdtdec_get_int(blob, node, "samsung,logo-on", 0); + if (panel_info.logo_on) { + panel_info.logo_width = fdtdec_get_int(blob, node, + "samsung,logo-width", 0); + panel_info.logo_height = fdtdec_get_int(blob, node, + "samsung,logo-height", 0); + panel_info.logo_addr = fdtdec_get_int(blob, node, + "samsung,logo-addr", 0); + } + + panel_info.rgb_mode = fdtdec_get_int(blob, node, + "samsung,rgb-mode", 0); + panel_info.pclk_name = fdtdec_get_int(blob, node, + "samsung,pclk-name", 0); + panel_info.sclk_div = fdtdec_get_int(blob, node, + "samsung,sclk-div", 0); + panel_info.dual_lcd_enabled = fdtdec_get_int(blob, node, + "samsung,dual-lcd-enabled", 0); + + return 0; +} +#endif + void lcd_ctrl_init(void *lcdbase) { set_system_display_ctrl(); set_lcd_clk(); +#ifdef CONFIG_OF_CONTROL + if (exynos_fimd_parse_dt(gd->fdt_blob)) + debug("Can't get proper panel info\n"); +#endif /* initialize parameters which is specific to panel. */ init_panel_info(&panel_info); diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c index 2efe6a6..3359949 100644 --- a/drivers/video/exynos_fimd.c +++ b/drivers/video/exynos_fimd.c @@ -25,13 +25,18 @@ #include <asm/io.h> #include <lcd.h> #include <div64.h> +#include <fdtdec.h> +#include <libfdt.h> #include <asm/arch/clk.h> #include <asm/arch/clock.h> #include <asm/arch/cpu.h> #include "exynos_fb.h" +DECLARE_GLOBAL_DATA_PTR; + static unsigned long *lcd_base_addr; static vidinfo_t *pvid; +static struct exynos_fb *fimd_ctrl; void exynos_fimd_lcd_init_mem(u_long screen_base, u_long fb_size, u_long palette_size) @@ -41,8 +46,6 @@ void exynos_fimd_lcd_init_mem(u_long screen_base, u_long fb_size, static void exynos_fimd_set_dualrgb(unsigned int enabled) { - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); unsigned int cfg = 0; if (enabled) { @@ -59,9 +62,6 @@ static void exynos_fimd_set_dualrgb(unsigned int enabled) static void exynos_fimd_set_dp_clkcon(unsigned int enabled) { - - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); unsigned int cfg = 0; if (enabled) @@ -73,8 +73,6 @@ static void exynos_fimd_set_dp_clkcon(unsigned int enabled) static void exynos_fimd_set_par(unsigned int win_id) { unsigned int cfg = 0; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); /* set window control */ cfg = readl((unsigned int)&fimd_ctrl->wincon0 + @@ -126,8 +124,6 @@ static void exynos_fimd_set_par(unsigned int win_id) static void exynos_fimd_set_buffer_address(unsigned int win_id) { unsigned long start_addr, end_addr; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); start_addr = (unsigned long)lcd_base_addr; end_addr = start_addr + ((pvid->vl_col * (NBITS(pvid->vl_bpix) / 8)) * @@ -144,8 +140,6 @@ static void exynos_fimd_set_clock(vidinfo_t *pvid) unsigned int cfg = 0, div = 0, remainder, remainder_div; unsigned long pixel_clock; unsigned long long src_clock; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); if (pvid->dual_lcd_enabled) { pixel_clock = pvid->vl_freq * @@ -197,8 +191,6 @@ static void exynos_fimd_set_clock(vidinfo_t *pvid) void exynos_set_trigger(void) { unsigned int cfg = 0; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); cfg = readl(&fimd_ctrl->trigcon); @@ -211,8 +203,6 @@ int exynos_is_i80_frame_done(void) { unsigned int cfg = 0; int status; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); cfg = readl(&fimd_ctrl->trigcon); @@ -226,8 +216,6 @@ int exynos_is_i80_frame_done(void) static void exynos_fimd_lcd_on(void) { unsigned int cfg = 0; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); /* display on */ cfg = readl(&fimd_ctrl->vidcon0); @@ -238,8 +226,6 @@ static void exynos_fimd_lcd_on(void) static void exynos_fimd_window_on(unsigned int win_id) { unsigned int cfg = 0; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); /* enable window */ cfg = readl((unsigned int)&fimd_ctrl->wincon0 + @@ -256,8 +242,6 @@ static void exynos_fimd_window_on(unsigned int win_id) void exynos_fimd_lcd_off(void) { unsigned int cfg = 0; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); cfg = readl(&fimd_ctrl->vidcon0); cfg &= (EXYNOS_VIDCON0_ENVID_DISABLE | EXYNOS_VIDCON0_ENVID_F_DISABLE); @@ -267,8 +251,6 @@ void exynos_fimd_lcd_off(void) void exynos_fimd_window_off(unsigned int win_id) { unsigned int cfg = 0; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); cfg = readl((unsigned int)&fimd_ctrl->wincon0 + EXYNOS_WINCON(win_id)); @@ -286,8 +268,20 @@ void exynos_fimd_lcd_init(vidinfo_t *vid) { unsigned int cfg = 0, rgb_mode; unsigned int offset; - struct exynos_fb *fimd_ctrl = - (struct exynos_fb *)samsung_get_base_fimd(); +#ifdef CONFIG_OF_CONTROL + unsigned int node; + + node = fdtdec_next_compatible(gd->fdt_blob, + 0, COMPAT_SAMSUNG_EXYNOS_FIMD); + if (node <= 0) + debug("exynos_fb: Can't get device node for fimd\n"); + + fimd_ctrl = (struct exynos_fb *)fdtdec_get_addr(gd->fdt_blob, + node, "reg"); + if (fimd_ctrl == NULL) + debug("Can't get the FIMD base address\n"); +#endif + fimd_ctrl = (struct exynos_fb *)samsung_get_base_fimd(); offset = exynos_fimd_get_base_offset(); |