diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/dma/fsl_dma.c | 64 |
1 files changed, 49 insertions, 15 deletions
diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c index cba5d5b..df33e7a 100644 --- a/drivers/dma/fsl_dma.c +++ b/drivers/dma/fsl_dma.c @@ -33,7 +33,16 @@ /* Controller can only transfer 2^26 - 1 bytes at a time */ #define FSL_DMA_MAX_SIZE (0x3ffffff) -#if defined(CONFIG_MPC85xx) +#if defined(CONFIG_MPC83xx) +#define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_CTM_DIRECT | FSL_DMA_MR_DMSEN) +#else +#define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT) +#endif + + +#if defined(CONFIG_MPC83xx) +dma83xx_t *dma_base = (void *)(CONFIG_SYS_MPC83xx_DMA_ADDR); +#elif defined(CONFIG_MPC85xx) ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); #elif defined(CONFIG_MPC86xx) ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); @@ -50,17 +59,35 @@ static void dma_sync(void) #endif } +static void out_dma32(volatile unsigned *addr, int val) +{ +#if defined(CONFIG_MPC83xx) + out_le32(addr, val); +#else + out_be32(addr, val); +#endif +} + +static uint in_dma32(volatile unsigned *addr) +{ +#if defined(CONFIG_MPC83xx) + return in_le32(addr); +#else + return in_be32(addr); +#endif +} + static uint dma_check(void) { volatile fsl_dma_t *dma = &dma_base->dma[0]; uint status; /* While the channel is busy, spin */ do { - status = in_be32(&dma->sr); + status = in_dma32(&dma->sr); } while (status & FSL_DMA_SR_CB); /* clear MR[CS] channel start bit */ - out_be32(&dma->mr, in_be32(&dma->mr) & ~FSL_DMA_MR_CS); + out_dma32(&dma->mr, in_dma32(&dma->mr) & ~FSL_DMA_MR_CS); dma_sync(); if (status != 0) @@ -69,14 +96,16 @@ static uint dma_check(void) { return status; } +#if !defined(CONFIG_MPC83xx) void dma_init(void) { volatile fsl_dma_t *dma = &dma_base->dma[0]; - out_be32(&dma->satr, FSL_DMA_SATR_SREAD_SNOOP); - out_be32(&dma->datr, FSL_DMA_DATR_DWRITE_SNOOP); - out_be32(&dma->sr, 0xffffffff); /* clear any errors */ + out_dma32(&dma->satr, FSL_DMA_SATR_SREAD_SNOOP); + out_dma32(&dma->datr, FSL_DMA_DATR_DWRITE_SNOOP); + out_dma32(&dma->sr, 0xffffffff); /* clear any errors */ dma_sync(); } +#endif int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { volatile fsl_dma_t *dma = &dma_base->dma[0]; @@ -85,18 +114,17 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { while (count) { xfer_size = MIN(FSL_DMA_MAX_SIZE, count); - out_be32(&dma->dar, (uint) dest); - out_be32(&dma->sar, (uint) src); - out_be32(&dma->bcr, xfer_size); + out_dma32(&dma->dar, (uint) dest); + out_dma32(&dma->sar, (uint) src); + out_dma32(&dma->bcr, xfer_size); + dma_sync(); - /* Disable bandwidth control, use direct transfer mode */ - out_be32(&dma->mr, FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT); + /* Prepare mode register */ + out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT); dma_sync(); /* Start the transfer */ - out_be32(&dma->mr, FSL_DMA_MR_BWC_DIS | - FSL_DMA_MR_CTM_DIRECT | - FSL_DMA_MR_CS); + out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT | FSL_DMA_MR_CS); count -= xfer_size; src += xfer_size; @@ -111,7 +139,13 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { return 0; } -#if (defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) +/* + * 85xx/86xx use dma to initialize SDRAM when !CONFIG_ECC_INIT_VIA_DDRCONTROLLER + * while 83xx uses dma to initialize SDRAM when CONFIG_DDR_ECC_INIT_VIA_DMA + */ +#if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \ + !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) || \ + (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA))) void dma_meminit(uint val, uint size) { uint *p = 0; |