diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/onenand/onenand_base.c | 884 | ||||
| -rw-r--r-- | drivers/mtd/onenand/onenand_bbt.c | 22 |
2 files changed, 706 insertions, 200 deletions
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 9ce68e1..c22a8a8 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -4,6 +4,11 @@ * Copyright (C) 2005-2007 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> * + * Credits: + * Adrian Hunter <ext-adrian.hunter@nokia.com>: + * auto-placement support, read-while load support, various fixes + * Copyright (C) Nokia Corporation, 2007 + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -526,83 +531,273 @@ static void onenand_release_device(struct mtd_info *mtd) } /** - * onenand_read_ecc - [MTD Interface] Read data with ECC + * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer + * @param mtd MTD device structure + * @param buf destination address + * @param column oob offset to read from + * @param thislen oob length to read + */ +static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, + int column, int thislen) +{ + struct onenand_chip *this = mtd->priv; + struct nand_oobfree *free; + int readcol = column; + int readend = column + thislen; + int lastgap = 0; + unsigned int i; + uint8_t *oob_buf = this->oob_buf; + + free = this->ecclayout->oobfree; + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + if (readcol >= lastgap) + readcol += free->offset - lastgap; + if (readend >= lastgap) + readend += free->offset - lastgap; + lastgap = free->offset + free->length; + } + this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize); + free = this->ecclayout->oobfree; + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + int free_end = free->offset + free->length; + if (free->offset < readend && free_end > readcol) { + int st = max_t(int,free->offset,readcol); + int ed = min_t(int,free_end,readend); + int n = ed - st; + memcpy(buf, oob_buf + st, n); + buf += n; + } else if (column == 0) + break; + } + return 0; +} + +/** + * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band * @param mtd MTD device structure * @param from offset to read from - * @param len number of bytes to read - * @param retlen pointer to variable to store the number of read bytes - * @param buf the databuffer to put data - * @param oob_buf filesystem supplied oob data buffer - * @param oobsel oob selection structure + * @param ops oob operation description structure * - * OneNAND read with ECC + * OneNAND read main and/or out-of-band data */ -static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf, - u_char * oob_buf, struct nand_oobinfo *oobsel) +static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) { struct onenand_chip *this = mtd->priv; - int read = 0, column; - int thislen; - int ret = 0; + struct mtd_ecc_stats stats; + size_t len = ops->len; + size_t ooblen = ops->ooblen; + u_char *buf = ops->datbuf; + u_char *oobbuf = ops->oobbuf; + int read = 0, column, thislen; + int oobread = 0, oobcolumn, thisooblen, oobsize; + int ret = 0, boundary = 0; + int writesize = this->writesize; + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "onenand_read_ops_nolock: from = 0x%08x, len = %i\n", + (unsigned int) from, (int) len); + + if (ops->mode == MTD_OOB_AUTO) + oobsize = this->ecclayout->oobavail; + else + oobsize = mtd->oobsize; - MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_read_ecc: " - "from = 0x%08x, len = %i\n", - (unsigned int)from, (int)len); + oobcolumn = from & (mtd->oobsize - 1); /* Do not allow reads past end of device */ if ((from + len) > mtd->size) { - MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_read_ecc: " - "Attempt read beyond end of device\n"); - *retlen = 0; + printk(KERN_ERR "onenand_read_ops_nolock: Attempt read beyond end of device\n"); + ops->retlen = 0; + ops->oobretlen = 0; return -EINVAL; } - /* Grab the lock and see if the device is available */ - onenand_get_device(mtd, FL_READING); + stats = mtd->ecc_stats; - while (read < len) { - thislen = min_t(int, mtd->writesize, len - read); - - column = from & (mtd->writesize - 1); - if (column + thislen > mtd->writesize) - thislen = mtd->writesize - column; + /* Read-while-load method */ + /* Do first load to bufferRAM */ + if (read < len) { if (!onenand_check_bufferram(mtd, from)) { - this->command(mtd, ONENAND_CMD_READ, from, - mtd->writesize); + this->command(mtd, ONENAND_CMD_READ, from, writesize); ret = this->wait(mtd, FL_READING); - /* First copy data and check return value for ECC handling */ - onenand_update_bufferram(mtd, from, 1); + onenand_update_bufferram(mtd, from, !ret); + if (ret == -EBADMSG) + ret = 0; } + } - this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, - thislen); + thislen = min_t(int, writesize, len - read); + column = from & (writesize - 1); + if (column + thislen > writesize) + thislen = writesize - column; - read += thislen; - if (read == len) - break; + while (!ret) { + /* If there is more to load then start next load */ + from += thislen; + if (read + thislen < len) { + this->command(mtd, ONENAND_CMD_READ, from, writesize); + /* + * Chip boundary handling in DDP + * Now we issued chip 1 read and pointed chip 1 + * bufferam so we have to point chip 0 bufferam. + */ + if (ONENAND_IS_DDP(this) && + unlikely(from == (this->chipsize >> 1))) { + this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2); + boundary = 1; + } else + boundary = 0; + ONENAND_SET_PREV_BUFFERRAM(this); + } - if (ret) { - MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_read_ecc: read failed = %d\n", ret); - break; + /* While load is going, read from last bufferRAM */ + this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen); + + /* Read oob area if needed */ + if (oobbuf) { + thisooblen = oobsize - oobcolumn; + thisooblen = min_t(int, thisooblen, ooblen - oobread); + + if (ops->mode == MTD_OOB_AUTO) + onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen); + else + this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen); + oobread += thisooblen; + oobbuf += thisooblen; + oobcolumn = 0; } - from += thislen; + /* See if we are done */ + read += thislen; + if (read == len) + break; + /* Set up for next read from bufferRAM */ + if (unlikely(boundary)) + this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2); + ONENAND_SET_NEXT_BUFFERRAM(this); buf += thislen; - } + thislen = min_t(int, writesize, len - read); + column = 0; - /* Deselect and wake up anyone waiting on the device */ - onenand_release_device(mtd); + /* Now wait for load */ + ret = this->wait(mtd, FL_READING); + onenand_update_bufferram(mtd, from, !ret); + if (ret == -EBADMSG) + ret = 0; + } /* * Return success, if no ECC failures, else -EBADMSG * fs driver will take care of that, because * retlen == desired len and result == -EBADMSG */ - *retlen = read; - return ret; + ops->retlen = read; + ops->oobretlen = oobread; + + if (ret) + return ret; + + if (mtd->ecc_stats.failed - stats.failed) + return -EBADMSG; + + return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; +} + +/** + * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band + * @param mtd MTD device structure + * @param from offset to read from + * @param ops oob operation description structure + * + * OneNAND read out-of-band data from the spare area + */ +static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + struct mtd_ecc_stats stats; + int read = 0, thislen, column, oobsize; + size_t len = ops->ooblen; + mtd_oob_mode_t mode = ops->mode; + u_char *buf = ops->oobbuf; + int ret = 0; + + from += ops->ooboffs; + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "onenand_read_oob_nolock: from = 0x%08x, len = %i\n", + (unsigned int) from, (int) len); + + /* Initialize return length value */ + ops->oobretlen = 0; + + if (mode == MTD_OOB_AUTO) + oobsize = this->ecclayout->oobavail; + else + oobsize = mtd->oobsize; + + column = from & (mtd->oobsize - 1); + + if (unlikely(column >= oobsize)) { + printk(KERN_ERR "onenand_read_oob_nolock: Attempted to start read outside oob\n"); + return -EINVAL; + } + + /* Do not allow reads past end of device */ + if (unlikely(from >= mtd->size || + column + len > ((mtd->size >> this->page_shift) - + (from >> this->page_shift)) * oobsize)) { + printk(KERN_ERR "onenand_read_oob_nolock: Attempted to read beyond end of device\n"); + return -EINVAL; + } + + stats = mtd->ecc_stats; + + while (read < len) { + thislen = oobsize - column; + thislen = min_t(int, thislen, len); + + this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize); + + onenand_update_bufferram(mtd, from, 0); + + ret = this->wait(mtd, FL_READING); + if (ret && ret != -EBADMSG) { + printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret); + break; + } + + if (mode == MTD_OOB_AUTO) + onenand_transfer_auto_oob(mtd, buf, column, thislen); + else + this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen); + + read += thislen; + + if (read == len) + break; + + buf += thislen; + + /* Read more? */ + if (read < len) { + /* Page size */ + from += mtd->writesize; + column = 0; + } + } + + ops->oobretlen = read; + + if (ret) + return ret; + + if (mtd->ecc_stats.failed - stats.failed) + return -EBADMSG; + + return 0; } /** @@ -618,38 +813,126 @@ static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) { - return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL); + struct mtd_oob_ops ops = { + .len = len, + .ooblen = 0, + .datbuf = buf, + .oobbuf = NULL, + }; + int ret; + + onenand_get_device(mtd, FL_READING); + ret = onenand_read_ops_nolock(mtd, from, &ops); + onenand_release_device(mtd); + + *retlen = ops.retlen; + return ret; } /** * onenand_read_oob - [MTD Interface] OneNAND read out-of-band * @param mtd MTD device structure * @param from offset to read from - * @param len number of bytes to read - * @param retlen pointer to variable to store the number of read bytes - * @param buf the databuffer to put data + * @param ops oob operations description structure * - * OneNAND read out-of-band data from the spare area + * OneNAND main and/or out-of-band */ -int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf) +int onenand_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + int ret; + + switch (ops->mode) { + case MTD_OOB_PLACE: + case MTD_OOB_AUTO: + break; + case MTD_OOB_RAW: + /* Not implemented yet */ + default: + return -EINVAL; + } + + onenand_get_device(mtd, FL_READING); + if (ops->datbuf) + ret = onenand_read_ops_nolock(mtd, from, ops); + else + ret = onenand_read_oob_nolock(mtd, from, ops); + onenand_release_device(mtd); + + return ret; +} + +/** + * onenand_bbt_wait - [DEFAULT] wait until the command is done + * @param mtd MTD device structure + * @param state state to select the max. timeout value + * + * Wait for command done. + */ +static int onenand_bbt_wait(struct mtd_info *mtd, int state) +{ + struct onenand_chip *this = mtd->priv; + unsigned int flags = ONENAND_INT_MASTER; + unsigned int interrupt; + unsigned int ctrl; + + while (1) { + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + if (interrupt & flags) + break; + } + + /* To get correct interrupt status in timeout case */ + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + + /* Initial bad block case: 0x2400 or 0x0400 */ + if (ctrl & ONENAND_CTRL_ERROR) { + printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl); + return ONENAND_BBT_READ_ERROR; + } + + if (interrupt & ONENAND_INT_READ) { + int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS); + if (ecc & ONENAND_ECC_2BIT_ALL) + return ONENAND_BBT_READ_ERROR; + } else { + printk(KERN_ERR "onenand_bbt_wait: read timeout!" + "ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt); + return ONENAND_BBT_READ_FATAL_ERROR; + } + + return 0; +} + +/** + * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan + * @param mtd MTD device structure + * @param from offset to read from + * @param ops oob operation description structure + * + * OneNAND read out-of-band data from the spare area for bbt scan + */ +int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) { struct onenand_chip *this = mtd->priv; int read = 0, thislen, column; int ret = 0; + size_t len = ops->ooblen; + u_char *buf = ops->oobbuf; - MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_read_oob: " - "from = 0x%08x, len = %i\n", - (unsigned int)from, (int)len); + MTDDEBUG(MTD_DEBUG_LEVEL3, + "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", + (unsigned int) from, len); - /* Initialize return length value */ - *retlen = 0; + /* Initialize return value */ + ops->oobretlen = 0; /* Do not allow reads past end of device */ if (unlikely((from + len) > mtd->size)) { - MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_read_oob: " - "Attempt read beyond end of device\n"); - return -EINVAL; + printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n"); + return ONENAND_BBT_READ_FATAL_ERROR; } /* Grab the lock and see if the device is available */ @@ -658,6 +941,7 @@ int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, column = from & (mtd->oobsize - 1); while (read < len) { + thislen = mtd->oobsize - column; thislen = min_t(int, thislen, len); @@ -665,27 +949,21 @@ int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, onenand_update_bufferram(mtd, from, 0); - ret = this->wait(mtd, FL_READING); - /* First copy data and check return value for ECC handling */ - - this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, - thislen); + ret = onenand_bbt_wait(mtd, FL_READING); + if (ret) + break; + this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen); read += thislen; if (read == len) break; - if (ret) { - MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_read_oob: read failed = %d\n", ret); - break; - } - buf += thislen; + /* Read more? */ if (read < len) { - /* Page size */ - from += mtd->writesize; + /* Update Page size */ + from += this->writesize; column = 0; } } @@ -693,224 +971,425 @@ int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, /* Deselect and wake up anyone waiting on the device */ onenand_release_device(mtd); - *retlen = read; + ops->oobretlen = read; return ret; } + #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE /** - * onenand_verify_page - [GENERIC] verify the chip contents after a write - * @param mtd MTD device structure - * @param buf the databuffer to verify - * - * Check DataRAM area directly + * onenand_verify_oob - [GENERIC] verify the oob contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param to offset to read from */ -static int onenand_verify_page(struct mtd_info *mtd, u_char * buf, - loff_t addr) +static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to) { struct onenand_chip *this = mtd->priv; - void __iomem *dataram0, *dataram1; + u_char *oob_buf = this->oob_buf; + int status, i; + + this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize); + onenand_update_bufferram(mtd, to, 0); + status = this->wait(mtd, FL_READING); + if (status) + return status; + + this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize); + for (i = 0; i < mtd->oobsize; i++) + if (buf[i] != 0xFF && buf[i] != oob_buf[i]) + return -EBADMSG; + + return 0; +} + +/** + * onenand_verify - [GENERIC] verify the chip contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param addr offset to read from + * @param len number of bytes to read and compare + */ +static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *dataram; int ret = 0; + int thislen, column; - this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize); + while (len != 0) { + thislen = min_t(int, this->writesize, len); + column = addr & (this->writesize - 1); + if (column + thislen > this->writesize) + thislen = this->writesize - column; - ret = this->wait(mtd, FL_READING); - if (ret) - return ret; + this->command(mtd, ONENAND_CMD_READ, addr, this->writesize); - onenand_update_bufferram(mtd, addr, 1); + onenand_update_bufferram(mtd, addr, 0); - /* Check, if the two dataram areas are same */ - dataram0 = this->base + ONENAND_DATARAM; - dataram1 = dataram0 + mtd->writesize; + ret = this->wait(mtd, FL_READING); + if (ret) + return ret; - if (memcmp(dataram0, dataram1, mtd->writesize)) - return -EBADMSG; + onenand_update_bufferram(mtd, addr, 1); + + dataram = this->base + ONENAND_DATARAM; + dataram += onenand_bufferram_offset(mtd, ONENAND_DATARAM); + + if (memcmp(buf, dataram + column, thislen)) + return -EBADMSG; + + len -= thislen; + buf += thislen; + addr += thislen; + } return 0; } #else -#define onenand_verify_page(...) (0) +#define onenand_verify(...) (0) +#define onenand_verify_oob(...) (0) #endif #define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0) /** - * onenand_write_ecc - [MTD Interface] OneNAND write with ECC - * @param mtd MTD device structure - * @param to offset to write to - * @param len number of bytes to write - * @param retlen pointer to variable to store the number of written bytes - * @param buf the data to write - * @param eccbuf filesystem supplied oob data buffer - * @param oobsel oob selection structure + * onenand_fill_auto_oob - [Internal] oob auto-placement transfer + * @param mtd MTD device structure + * @param oob_buf oob buffer + * @param buf source address + * @param column oob offset to write to + * @param thislen oob length to write + */ +static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf, + const u_char *buf, int column, int thislen) +{ + struct onenand_chip *this = mtd->priv; + struct nand_oobfree *free; + int writecol = column; + int writeend = column + thislen; + int lastgap = 0; + unsigned int i; + + free = this->ecclayout->oobfree; + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + if (writecol >= lastgap) + writecol += free->offset - lastgap; + if (writeend >= lastgap) + writeend += free->offset - lastgap; + lastgap = free->offset + free->length; + } + free = this->ecclayout->oobfree; + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + int free_end = free->offset + free->length; + if (free->offset < writeend && free_end > writecol) { + int st = max_t(int,free->offset,writecol); + int ed = min_t(int,free_end,writeend); + int n = ed - st; + memcpy(oob_buf + st, buf, n); + buf += n; + } else if (column == 0) + break; + } + return 0; +} + +/** + * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band + * @param mtd MTD device structure + * @param to offset to write to + * @param ops oob operation description structure * - * OneNAND write with ECC + * Write main and/or oob with ECC */ -static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf, - u_char * eccbuf, struct nand_oobinfo *oobsel) +static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) { struct onenand_chip *this = mtd->priv; - int written = 0; + int written = 0, column, thislen, subpage; + int oobwritten = 0, oobcolumn, thisooblen, oobsize; + size_t len = ops->len; + size_t ooblen = ops->ooblen; + const u_char *buf = ops->datbuf; + const u_char *oob = ops->oobbuf; + u_char *oobbuf; int ret = 0; - MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_write_ecc: " - "to = 0x%08x, len = %i\n", - (unsigned int)to, (int)len); + MTDDEBUG(MTD_DEBUG_LEVEL3, + "onenand_write_ops_nolock: to = 0x%08x, len = %i\n", + (unsigned int) to, (int) len); /* Initialize retlen, in case of early exit */ - *retlen = 0; + ops->retlen = 0; + ops->oobretlen = 0; /* Do not allow writes past end of device */ if (unlikely((to + len) > mtd->size)) { - MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_ecc: " - "Attempt write to past end of device\n"); + printk(KERN_ERR "onenand_write_ops_nolock: Attempt write to past end of device\n"); return -EINVAL; } /* Reject writes, which are not page aligned */ - if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) { - MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_ecc: " - "Attempt to write not page aligned data\n"); + if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) { + printk(KERN_ERR "onenand_write_ops_nolock: Attempt to write not page aligned data\n"); return -EINVAL; } - /* Grab the lock and see if the device is available */ - onenand_get_device(mtd, FL_WRITING); + if (ops->mode == MTD_OOB_AUTO) + oobsize = this->ecclayout->oobavail; + else + oobsize = mtd->oobsize; + + oobcolumn = to & (mtd->oobsize - 1); + + column = to & (mtd->writesize - 1); /* Loop until all data write */ while (written < len) { - int thislen = min_t(int, mtd->writesize, len - written); + u_char *wbuf = (u_char *) buf; - this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->writesize); + thislen = min_t(int, mtd->writesize - column, len - written); + thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten); - this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen); - this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, - mtd->oobsize); + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen); - this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize); + /* Partial page write */ + subpage = thislen < mtd->writesize; + if (subpage) { + memset(this->page_buf, 0xff, mtd->writesize); + memcpy(this->page_buf + column, buf, thislen); + wbuf = this->page_buf; + } + + this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize); + + if (oob) { + oobbuf = this->oob_buf; - onenand_update_bufferram(mtd, to, 1); + /* We send data to spare ram with oobsize + * * to prevent byte access */ + memset(oobbuf, 0xff, mtd->oobsize); + if (ops->mode == MTD_OOB_AUTO) + onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen); + else + memcpy(oobbuf + oobcolumn, oob, thisooblen); + + oobwritten += thisooblen; + oob += thisooblen; + oobcolumn = 0; + } else + oobbuf = (u_char *) ffchars; + + this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); + + this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize); ret = this->wait(mtd, FL_WRITING); + + /* In partial page write we don't update bufferram */ + onenand_update_bufferram(mtd, to, !ret && !subpage); + if (ONENAND_IS_2PLANE(this)) { + ONENAND_SET_BUFFERRAM1(this); + onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage); + } + if (ret) { - MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_write_ecc: write filaed %d\n", ret); + printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret); break; } - written += thislen; - /* Only check verify write turn on */ - ret = onenand_verify_page(mtd, (u_char *) buf, to); + ret = onenand_verify(mtd, buf, to, thislen); if (ret) { - MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_write_ecc: verify failed %d\n", ret); + printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret); break; } + written += thislen; + if (written == len) break; + column = 0; to += thislen; buf += thislen; } - /* Deselect and wake up anyone waiting on the device */ - onenand_release_device(mtd); - - *retlen = written; + ops->retlen = written; return ret; } /** - * onenand_write - [MTD Interface] compability function for onenand_write_ecc - * @param mtd MTD device structure - * @param to offset to write to - * @param len number of bytes to write - * @param retlen pointer to variable to store the number of written bytes - * @param buf the data to write - * - * This function simply calls onenand_write_ecc - * with oob buffer and oobsel = NULL - */ -int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf) -{ - return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL); -} - -/** - * onenand_write_oob - [MTD Interface] OneNAND write out-of-band - * @param mtd MTD device structure - * @param to offset to write to - * @param len number of bytes to write - * @param retlen pointer to variable to store the number of written bytes - * @param buf the data to write + * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * @param mode operation mode * * OneNAND write out-of-band */ -int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf) +static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) { struct onenand_chip *this = mtd->priv; - int column, status; + int column, ret = 0, oobsize; int written = 0; + u_char *oobbuf; + size_t len = ops->ooblen; + const u_char *buf = ops->oobbuf; + mtd_oob_mode_t mode = ops->mode; - MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_write_oob: " - "to = 0x%08x, len = %i\n", - (unsigned int)to, (int)len); + to += ops->ooboffs; + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "onenand_write_oob_nolock: to = 0x%08x, len = %i\n", + (unsigned int) to, (int) len); /* Initialize retlen, in case of early exit */ - *retlen = 0; + ops->oobretlen = 0; - /* Do not allow writes past end of device */ - if (unlikely((to + len) > mtd->size)) { - MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_oob: " - "Attempt write to past end of device\n"); + if (mode == MTD_OOB_AUTO) + oobsize = this->ecclayout->oobavail; + else + oobsize = mtd->oobsize; + + column = to & (mtd->oobsize - 1); + + if (unlikely(column >= oobsize)) { + printk(KERN_ERR "onenand_write_oob_nolock: Attempted to start write outside oob\n"); return -EINVAL; } - /* Grab the lock and see if the device is available */ - onenand_get_device(mtd, FL_WRITING); + /* For compatibility with NAND: Do not allow write past end of page */ + if (unlikely(column + len > oobsize)) { + printk(KERN_ERR "onenand_write_oob_nolock: " + "Attempt to write past end of page\n"); + return -EINVAL; + } + + /* Do not allow reads past end of device */ + if (unlikely(to >= mtd->size || + column + len > ((mtd->size >> this->page_shift) - + (to >> this->page_shift)) * oobsize)) { + printk(KERN_ERR "onenand_write_oob_nolock: Attempted to write past end of device\n"); + return -EINVAL; + } + + oobbuf = this->oob_buf; /* Loop until all data write */ while (written < len) { - int thislen = min_t(int, mtd->oobsize, len - written); - - column = to & (mtd->oobsize - 1); + int thislen = min_t(int, oobsize, len - written); this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize); - this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, - mtd->oobsize); - this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column, - thislen); + /* We send data to spare ram with oobsize + * to prevent byte access */ + memset(oobbuf, 0xff, mtd->oobsize); + if (mode == MTD_OOB_AUTO) + onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen); + else + memcpy(oobbuf + column, buf, thislen); + this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); onenand_update_bufferram(mtd, to, 0); + if (ONENAND_IS_2PLANE(this)) { + ONENAND_SET_BUFFERRAM1(this); + onenand_update_bufferram(mtd, to + this->writesize, 0); + } - status = this->wait(mtd, FL_WRITING); - if (status) + ret = this->wait(mtd, FL_WRITING); + if (ret) { + printk(KERN_ERR "onenand_write_oob_nolock: write failed %d\n", ret); break; + } + + ret = onenand_verify_oob(mtd, oobbuf, to); + if (ret) { + printk(KERN_ERR "onenand_write_oob_nolock: verify failed %d\n", ret); + break; + } written += thislen; if (written == len) break; - to += thislen; + to += mtd->writesize; buf += thislen; + column = 0; } - /* Deselect and wake up anyone waiting on the device */ + ops->oobretlen = written; + + return ret; +} + +/** + * onenand_write - [MTD Interface] compability function for onenand_write_ecc + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * Write with ECC + */ +int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf) +{ + struct mtd_oob_ops ops = { + .len = len, + .ooblen = 0, + .datbuf = (u_char *) buf, + .oobbuf = NULL, + }; + int ret; + + onenand_get_device(mtd, FL_WRITING); + ret = onenand_write_ops_nolock(mtd, to, &ops); onenand_release_device(mtd); - *retlen = written; + *retlen = ops.retlen; + return ret; +} + +/** + * onenand_write_oob - [MTD Interface] OneNAND write out-of-band + * @param mtd MTD device structure + * @param to offset to write to + * @param ops oob operation description structure + * + * OneNAND write main and/or out-of-band + */ +int onenand_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + int ret; + + switch (ops->mode) { + case MTD_OOB_PLACE: + case MTD_OOB_AUTO: + break; + case MTD_OOB_RAW: + /* Not implemented yet */ + default: + return -EINVAL; + } + + onenand_get_device(mtd, FL_WRITING); + if (ops->datbuf) + ret = onenand_write_ops_nolock(mtd, to, ops); + else + ret = onenand_write_oob_nolock(mtd, to, ops); + onenand_release_device(mtd); + + return ret; - return 0; } /** @@ -947,29 +1426,30 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) int len; int ret = 0; - MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", - (unsigned int)instr->addr, (unsigned int)instr->len); + MTDDEBUG (MTD_DEBUG_LEVEL3, + "onenand_erase: start = 0x%08x, len = %i\n", + (unsigned int)instr->addr, (unsigned int)ins tr->len); block_size = (1 << this->erase_shift); /* Start address must align on block boundary */ if (unlikely(instr->addr & (block_size - 1))) { MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_erase: Unaligned address\n"); + "onenand_erase: Unaligned address\n"); return -EINVAL; } /* Length must align on block boundary */ if (unlikely(instr->len & (block_size - 1))) { MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_erase: Length not block aligned\n"); + "onenand_erase: Length not block aligned\n"); return -EINVAL; } /* Do not allow erase past end of device */ if (unlikely((instr->len + instr->addr) > mtd->size)) { MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_erase: Erase past end of device\n"); + "onenand_erase: Erase past end of device\n"); return -EINVAL; } @@ -1277,6 +1757,8 @@ static int onenand_probe(struct mtd_info *mtd) this->page_shift = ffs(mtd->writesize) - 1; this->ppb_shift = (this->erase_shift - this->page_shift); this->page_mask = (mtd->erasesize / mtd->writesize) - 1; + /* It's real page size */ + this->writesize = mtd->writesize; /* REVIST: Multichip handling */ @@ -1346,6 +1828,28 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) this->read_bufferram = onenand_sync_read_bufferram; } + /* Allocate buffers, if necessary */ + if (!this->page_buf) { + this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL); + if (!this->page_buf) { + printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n"); + return -ENOMEM; + } + this->options |= ONENAND_PAGEBUF_ALLOC; + } + if (!this->oob_buf) { + this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL); + if (!this->oob_buf) { + printk(KERN_ERR "onenand_scan: Can't allocate oob_buf\n"); + if (this->options & ONENAND_PAGEBUF_ALLOC) { + this->options &= ~ONENAND_PAGEBUF_ALLOC; + kfree(this->page_buf); + } + return -ENOMEM; + } + this->options |= ONENAND_OOBBUF_ALLOC; + } + onenand_unlock(mtd, 0, mtd->size); return onenand_default_bbt(mtd); diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c index d13d277..dde11ae 100644 --- a/drivers/mtd/onenand/onenand_bbt.c +++ b/drivers/mtd/onenand/onenand_bbt.c @@ -68,6 +68,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf, int startblock; loff_t from; size_t readlen, ooblen; + struct mtd_oob_ops ops; printk(KERN_INFO "Scanning device for bad blocks\n"); @@ -85,25 +86,26 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf, startblock = 0; from = 0; + ops.mode = MTD_OOB_PLACE; + ops.ooblen = readlen; + ops.oobbuf = buf; + ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0; + for (i = startblock; i < numblocks;) { int ret; for (j = 0; j < len; j++) { - size_t retlen; - /* No need to read pages fully, * just read required OOB bytes */ - ret = onenand_read_oob(mtd, + ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + - bd->offs, readlen, &retlen, - &buf[0]); + bd->offs, &ops); - if (ret && ret != -EAGAIN) { - printk("ret = %d\n", ret); - return ret; - } + /* If it is a initial bad block, just ignore it */ + if (ret == ONENAND_BBT_READ_FATAL_ERROR) + return -EIO; - if (check_short_pattern + if (ret || check_short_pattern (&buf[j * scanlen], scanlen, mtd->writesize, bd)) { bbm->bbt[i >> 3] |= 0x03 << (i & 0x6); printk(KERN_WARNING |