summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/clk/clk_rk3288.c6
-rw-r--r--drivers/core/uclass.c20
-rw-r--r--drivers/crypto/fsl/fsl_rsa.c1
-rw-r--r--drivers/i2c/Kconfig7
-rw-r--r--drivers/i2c/fsl_i2c.c9
-rw-r--r--drivers/i2c/i2c-uclass.c14
-rw-r--r--drivers/i2c/mvtwsi.c777
-rw-r--r--drivers/i2c/omap24xx_i2c.c407
-rw-r--r--drivers/mmc/Kconfig6
-rw-r--r--drivers/mmc/Makefile1
-rw-r--r--drivers/mmc/rockchip_sdhci.c93
-rw-r--r--drivers/net/fm/Makefile1
-rw-r--r--drivers/net/fm/ls1046.c123
-rw-r--r--drivers/pinctrl/Kconfig14
-rw-r--r--drivers/pinctrl/rockchip/Makefile4
-rw-r--r--drivers/usb/gadget/dwc2_udc_otg.c22
-rw-r--r--drivers/usb/gadget/dwc2_udc_otg_regs.h6
-rw-r--r--drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c3
-rw-r--r--drivers/usb/phy/Makefile1
-rw-r--r--drivers/usb/phy/rockchip_usb2_phy.c107
-rw-r--r--drivers/video/rockchip/rk_vop.c2
21 files changed, 1250 insertions, 374 deletions
diff --git a/drivers/clk/clk_rk3288.c b/drivers/clk/clk_rk3288.c
index 679f010..e00feb0 100644
--- a/drivers/clk/clk_rk3288.c
+++ b/drivers/clk/clk_rk3288.c
@@ -47,7 +47,7 @@ enum {
OUTPUT_MAX_HZ = 2200U * 1000000,
OUTPUT_MIN_HZ = 27500000,
FREF_MAX_HZ = 2200U * 1000000,
- FREF_MIN_HZ = 269 * 1000000,
+ FREF_MIN_HZ = 269 * 1000,
};
enum {
@@ -145,7 +145,7 @@ void *rockchip_get_cru(void)
struct udevice *dev;
int ret;
- ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+ ret = rockchip_get_clk(&dev);
if (ret)
return ERR_PTR(ret);
@@ -447,7 +447,7 @@ static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf)
}
#endif
-void rkclk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf)
+void rk3288_clk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf)
{
/* pll enter slow-mode */
rk_clrsetreg(&cru->cru_mode_con,
diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c
index 1141ce1..de602ae 100644
--- a/drivers/core/uclass.c
+++ b/drivers/core/uclass.c
@@ -311,6 +311,26 @@ static int uclass_find_device_by_phandle(enum uclass_id id,
}
#endif
+int uclass_get_device_by_driver(enum uclass_id id,
+ const struct driver *find_drv,
+ struct udevice **devp)
+{
+ struct udevice *dev;
+ struct uclass *uc;
+ int ret;
+
+ ret = uclass_get(id, &uc);
+ if (ret)
+ return ret;
+
+ list_for_each_entry(dev, &uc->dev_head, uclass_node) {
+ if (dev->driver == find_drv)
+ return uclass_get_device_tail(dev, 0, devp);
+ }
+
+ return -ENODEV;
+}
+
int uclass_get_device_tail(struct udevice *dev, int ret,
struct udevice **devp)
{
diff --git a/drivers/crypto/fsl/fsl_rsa.c b/drivers/crypto/fsl/fsl_rsa.c
index cf1c4c1..5471504 100644
--- a/drivers/crypto/fsl/fsl_rsa.c
+++ b/drivers/crypto/fsl/fsl_rsa.c
@@ -53,6 +53,7 @@ U_BOOT_DRIVER(fsl_rsa_mod_exp) = {
.name = "fsl_rsa_mod_exp",
.id = UCLASS_MOD_EXP,
.ops = &fsl_mod_exp_ops,
+ .flags = DM_FLAG_PRE_RELOC,
};
U_BOOT_DEVICE(fsl_rsa) = {
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 6e22bba..b3e8405 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -154,6 +154,13 @@ config SYS_I2C_UNIPHIER_F
Support for UniPhier FIFO-builtin I2C controller driver.
This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
+config SYS_I2C_MVTWSI
+ bool "Marvell I2C driver"
+ depends on DM_I2C
+ help
+ Support for Marvell I2C controllers as used on the orion5x and
+ kirkwood SoC families.
+
source "drivers/i2c/muxes/Kconfig"
endmenu
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index b8cc647..407c4a7 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -583,12 +583,11 @@ static int fsl_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
static int fsl_i2c_ofdata_to_platdata(struct udevice *bus)
{
struct fsl_i2c_dev *dev = dev_get_priv(bus);
- u64 reg;
- u32 addr, size;
+ fdt_addr_t addr;
+ fdt_size_t size;
- reg = fdtdec_get_addr(gd->fdt_blob, bus->of_offset, "reg");
- addr = reg >> 32;
- size = reg & 0xFFFFFFFF;
+ addr = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, bus->of_offset,
+ "reg", 0, &size);
dev->base = map_sysmem(CONFIG_SYS_IMMR + addr, size);
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index 50b99ea..20b30ff 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -467,6 +467,7 @@ int i2c_deblock(struct udevice *bus)
return ops->deblock(bus);
}
+#if CONFIG_IS_ENABLED(OF_CONTROL)
int i2c_chip_ofdata_to_platdata(const void *blob, int node,
struct dm_i2c_chip *chip)
{
@@ -482,31 +483,44 @@ int i2c_chip_ofdata_to_platdata(const void *blob, int node,
return 0;
}
+#endif
static int i2c_post_probe(struct udevice *dev)
{
+#if CONFIG_IS_ENABLED(OF_CONTROL)
struct dm_i2c_bus *i2c = dev_get_uclass_priv(dev);
i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
"clock-frequency", 100000);
return dm_i2c_set_bus_speed(dev, i2c->speed_hz);
+#else
+ return 0;
+#endif
}
static int i2c_post_bind(struct udevice *dev)
{
+#if CONFIG_IS_ENABLED(OF_CONTROL)
/* Scan the bus for devices */
return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+#else
+ return 0;
+#endif
}
static int i2c_child_post_bind(struct udevice *dev)
{
+#if CONFIG_IS_ENABLED(OF_CONTROL)
struct dm_i2c_chip *plat = dev_get_parent_platdata(dev);
if (dev->of_offset == -1)
return 0;
return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, plat);
+#else
+ return 0;
+#endif
}
UCLASS_DRIVER(i2c) = {
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index bf44432..ab7481a 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -12,12 +12,19 @@
#include <i2c.h>
#include <asm/errno.h>
#include <asm/io.h>
+#include <linux/compat.h>
+#ifdef CONFIG_DM_I2C
+#include <dm.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
/*
- * include a file that will provide CONFIG_I2C_MVTWSI_BASE*
- * and possibly other settings
+ * Include a file that will provide CONFIG_I2C_MVTWSI_BASE*, and possibly other
+ * settings
*/
+#ifndef CONFIG_DM_I2C
#if defined(CONFIG_ORION5X)
#include <asm/arch/orion5x.h>
#elif (defined(CONFIG_KIRKWOOD) || defined(CONFIG_ARCH_MVEBU))
@@ -27,6 +34,7 @@
#else
#error Driver mvtwsi not supported by SoC or board
#endif
+#endif /* CONFIG_DM_I2C */
/*
* TWSI register structure
@@ -51,8 +59,8 @@ struct mvtwsi_registers {
u32 data;
u32 control;
union {
- u32 status; /* when reading */
- u32 baudrate; /* when writing */
+ u32 status; /* When reading */
+ u32 baudrate; /* When writing */
};
u32 xtnd_slave_addr;
u32 reserved[2];
@@ -61,20 +69,43 @@ struct mvtwsi_registers {
#endif
+#ifdef CONFIG_DM_I2C
+struct mvtwsi_i2c_dev {
+ /* TWSI Register base for the device */
+ struct mvtwsi_registers *base;
+ /* Number of the device (determined from cell-index property) */
+ int index;
+ /* The I2C slave address for the device */
+ u8 slaveadd;
+ /* The configured I2C speed in Hz */
+ uint speed;
+ /* The current length of a clock period (depending on speed) */
+ uint tick;
+};
+#endif /* CONFIG_DM_I2C */
+
/*
- * Control register fields
+ * enum mvtwsi_ctrl_register_fields - Bit masks for flags in the control
+ * register
*/
-
-#define MVTWSI_CONTROL_ACK 0x00000004
-#define MVTWSI_CONTROL_IFLG 0x00000008
-#define MVTWSI_CONTROL_STOP 0x00000010
-#define MVTWSI_CONTROL_START 0x00000020
-#define MVTWSI_CONTROL_TWSIEN 0x00000040
-#define MVTWSI_CONTROL_INTEN 0x00000080
+enum mvtwsi_ctrl_register_fields {
+ /* Acknowledge bit */
+ MVTWSI_CONTROL_ACK = 0x00000004,
+ /* Interrupt flag */
+ MVTWSI_CONTROL_IFLG = 0x00000008,
+ /* Stop bit */
+ MVTWSI_CONTROL_STOP = 0x00000010,
+ /* Start bit */
+ MVTWSI_CONTROL_START = 0x00000020,
+ /* I2C enable */
+ MVTWSI_CONTROL_TWSIEN = 0x00000040,
+ /* Interrupt enable */
+ MVTWSI_CONTROL_INTEN = 0x00000080,
+};
/*
- * On sun6i and newer IFLG is a write-clear bit which is cleared by writing 1,
- * on other platforms it is a normal r/w bit which is cleared by writing 0.
+ * On sun6i and newer, IFLG is a write-clear bit, which is cleared by writing 1;
+ * on other platforms, it is a normal r/w bit, which is cleared by writing 0.
*/
#ifdef CONFIG_SUNXI_GEN_SUN6I
@@ -84,53 +115,95 @@ struct mvtwsi_registers {
#endif
/*
- * Status register values -- only those expected in normal master
- * operation on non-10-bit-address devices; whatever status we don't
- * expect in nominal conditions (bus errors, arbitration losses,
- * missing ACKs...) we just pass back to the caller as an error
+ * enum mvstwsi_status_values - Possible values of I2C controller's status
+ * register
+ *
+ * Only those statuses expected in normal master operation on
+ * non-10-bit-address devices are specified.
+ *
+ * Every status that's unexpected during normal operation (bus errors,
+ * arbitration losses, missing ACKs...) is passed back to the caller as an error
* code.
*/
+enum mvstwsi_status_values {
+ /* START condition transmitted */
+ MVTWSI_STATUS_START = 0x08,
+ /* Repeated START condition transmitted */
+ MVTWSI_STATUS_REPEATED_START = 0x10,
+ /* Address + write bit transmitted, ACK received */
+ MVTWSI_STATUS_ADDR_W_ACK = 0x18,
+ /* Data transmitted, ACK received */
+ MVTWSI_STATUS_DATA_W_ACK = 0x28,
+ /* Address + read bit transmitted, ACK received */
+ MVTWSI_STATUS_ADDR_R_ACK = 0x40,
+ /* Address + read bit transmitted, ACK not received */
+ MVTWSI_STATUS_ADDR_R_NAK = 0x48,
+ /* Data received, ACK transmitted */
+ MVTWSI_STATUS_DATA_R_ACK = 0x50,
+ /* Data received, ACK not transmitted */
+ MVTWSI_STATUS_DATA_R_NAK = 0x58,
+ /* No relevant status */
+ MVTWSI_STATUS_IDLE = 0xF8,
+};
-#define MVTWSI_STATUS_START 0x08
-#define MVTWSI_STATUS_REPEATED_START 0x10
-#define MVTWSI_STATUS_ADDR_W_ACK 0x18
-#define MVTWSI_STATUS_DATA_W_ACK 0x28
-#define MVTWSI_STATUS_ADDR_R_ACK 0x40
-#define MVTWSI_STATUS_ADDR_R_NAK 0x48
-#define MVTWSI_STATUS_DATA_R_ACK 0x50
-#define MVTWSI_STATUS_DATA_R_NAK 0x58
-#define MVTWSI_STATUS_IDLE 0xF8
+/*
+ * enum mvstwsi_ack_flags - Determine whether a read byte should be
+ * acknowledged or not.
+ */
+enum mvtwsi_ack_flags {
+ /* Send NAK after received byte */
+ MVTWSI_READ_NAK = 0,
+ /* Send ACK after received byte */
+ MVTWSI_READ_ACK = 1,
+};
/*
- * MVTWSI controller base
+ * calc_tick() - Calculate the duration of a clock cycle from the I2C speed
+ *
+ * @speed: The speed in Hz to calculate the clock cycle duration for.
+ * @return The duration of a clock cycle in ns.
*/
+inline uint calc_tick(uint speed)
+{
+ /* One tick = the duration of a period at the specified speed in ns (we
+ * add 100 ns to be on the safe side) */
+ return (1000000000u / speed) + 100;
+}
+#ifndef CONFIG_DM_I2C
+
+/*
+ * twsi_get_base() - Get controller register base for specified adapter
+ *
+ * @adap: Adapter to get the register base for.
+ * @return Register base for the specified adapter.
+ */
static struct mvtwsi_registers *twsi_get_base(struct i2c_adapter *adap)
{
switch (adap->hwadapnr) {
#ifdef CONFIG_I2C_MVTWSI_BASE0
case 0:
- return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE0;
+ return (struct mvtwsi_registers *)CONFIG_I2C_MVTWSI_BASE0;
#endif
#ifdef CONFIG_I2C_MVTWSI_BASE1
case 1:
- return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE1;
+ return (struct mvtwsi_registers *)CONFIG_I2C_MVTWSI_BASE1;
#endif
#ifdef CONFIG_I2C_MVTWSI_BASE2
case 2:
- return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE2;
+ return (struct mvtwsi_registers *)CONFIG_I2C_MVTWSI_BASE2;
#endif
#ifdef CONFIG_I2C_MVTWSI_BASE3
case 3:
- return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE3;
+ return (struct mvtwsi_registers *)CONFIG_I2C_MVTWSI_BASE3;
#endif
#ifdef CONFIG_I2C_MVTWSI_BASE4
case 4:
- return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE4;
+ return (struct mvtwsi_registers *)CONFIG_I2C_MVTWSI_BASE4;
#endif
#ifdef CONFIG_I2C_MVTWSI_BASE5
case 5:
- return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE5;
+ return (struct mvtwsi_registers *)CONFIG_I2C_MVTWSI_BASE5;
#endif
default:
printf("Missing mvtwsi controller %d base\n", adap->hwadapnr);
@@ -139,30 +212,48 @@ static struct mvtwsi_registers *twsi_get_base(struct i2c_adapter *adap)
return NULL;
}
+#endif
/*
- * Returned statuses are 0 for success and nonzero otherwise.
- * Currently, cmd_i2c and cmd_eeprom do not interpret an error status.
- * Thus to ease debugging, the return status contains some debug info:
- * - bits 31..24 are error class: 1 is timeout, 2 is 'status mismatch'.
- * - bits 23..16 are the last value of the control register.
- * - bits 15..8 are the last value of the status register.
- * - bits 7..0 are the expected value of the status register.
+ * enum mvtwsi_error_class - types of I2C errors
*/
+enum mvtwsi_error_class {
+ /* The controller returned a different status than expected */
+ MVTWSI_ERROR_WRONG_STATUS = 0x01,
+ /* The controller timed out */
+ MVTWSI_ERROR_TIMEOUT = 0x02,
+};
-#define MVTWSI_ERROR_WRONG_STATUS 0x01
-#define MVTWSI_ERROR_TIMEOUT 0x02
-
-#define MVTWSI_ERROR(ec, lc, ls, es) (((ec << 24) & 0xFF000000) | \
- ((lc << 16) & 0x00FF0000) | ((ls<<8) & 0x0000FF00) | (es & 0xFF))
+/*
+ * mvtwsi_error() - Build I2C return code from error information
+ *
+ * For debugging purposes, this function packs some information of an occurred
+ * error into a return code. These error codes are returned from I2C API
+ * functions (i2c_{read,write}, dm_i2c_{read,write}, etc.).
+ *
+ * @ec: The error class of the error (enum mvtwsi_error_class).
+ * @lc: The last value of the control register.
+ * @ls: The last value of the status register.
+ * @es: The expected value of the status register.
+ * @return The generated error code.
+ */
+inline uint mvtwsi_error(uint ec, uint lc, uint ls, uint es)
+{
+ return ((ec << 24) & 0xFF000000)
+ | ((lc << 16) & 0x00FF0000)
+ | ((ls << 8) & 0x0000FF00)
+ | (es & 0xFF);
+}
/*
- * Wait for IFLG to raise, or return 'timeout'; then if status is as expected,
- * return 0 (ok) or return 'wrong status'.
+ * twsi_wait() - Wait for I2C bus interrupt flag and check status, or time out.
+ *
+ * @return Zero if status is as expected, or a non-zero code if either a time
+ * out occurred, or the status was not the expected one.
*/
-static int twsi_wait(struct i2c_adapter *adap, int expected_status)
+static int twsi_wait(struct mvtwsi_registers *twsi, int expected_status,
+ uint tick)
{
- struct mvtwsi_registers *twsi = twsi_get_base(adap);
int control, status;
int timeout = 1000;
@@ -173,105 +264,140 @@ static int twsi_wait(struct i2c_adapter *adap, int expected_status)
if (status == expected_status)
return 0;
else
- return MVTWSI_ERROR(
+ return mvtwsi_error(
MVTWSI_ERROR_WRONG_STATUS,
control, status, expected_status);
}
- udelay(10); /* one clock cycle at 100 kHz */
+ ndelay(tick); /* One clock cycle */
} while (timeout--);
status = readl(&twsi->status);
- return MVTWSI_ERROR(
- MVTWSI_ERROR_TIMEOUT, control, status, expected_status);
+ return mvtwsi_error(MVTWSI_ERROR_TIMEOUT, control, status,
+ expected_status);
}
/*
- * Assert the START condition, either in a single I2C transaction
- * or inside back-to-back ones (repeated starts).
+ * twsi_start() - Assert a START condition on the bus.
+ *
+ * This function is used in both single I2C transactions and inside
+ * back-to-back transactions (repeated starts).
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @expected_status: The I2C bus status expected to be asserted after the
+ * operation completion.
+ * @tick: The duration of a clock cycle at the current I2C speed.
+ * @return Zero if status is as expected, or a non-zero code if either a time
+ * out occurred or the status was not the expected one.
*/
-static int twsi_start(struct i2c_adapter *adap, int expected_status, u8 *flags)
+static int twsi_start(struct mvtwsi_registers *twsi, int expected_status,
+ uint tick)
{
- struct mvtwsi_registers *twsi = twsi_get_base(adap);
-
- /* globally set TWSIEN in case it was not */
- *flags |= MVTWSI_CONTROL_TWSIEN;
- /* assert START */
- writel(*flags | MVTWSI_CONTROL_START |
- MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control);
- /* wait for controller to process START */
- return twsi_wait(adap, expected_status);
+ /* Assert START */
+ writel(MVTWSI_CONTROL_TWSIEN | MVTWSI_CONTROL_START |
+ MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control);
+ /* Wait for controller to process START */
+ return twsi_wait(twsi, expected_status, tick);
}
/*
- * Send a byte (i2c address or data).
+ * twsi_send() - Send a byte on the I2C bus.
+ *
+ * The byte may be part of an address byte or data.
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @byte: The byte to send.
+ * @expected_status: The I2C bus status expected to be asserted after the
+ * operation completion.
+ * @tick: The duration of a clock cycle at the current I2C speed.
+ * @return Zero if status is as expected, or a non-zero code if either a time
+ * out occurred or the status was not the expected one.
*/
-static int twsi_send(struct i2c_adapter *adap, u8 byte, int expected_status,
- u8 *flags)
+static int twsi_send(struct mvtwsi_registers *twsi, u8 byte,
+ int expected_status, uint tick)
{
- struct mvtwsi_registers *twsi = twsi_get_base(adap);
-
- /* put byte in data register for sending */
+ /* Write byte to data register for sending */
writel(byte, &twsi->data);
- /* clear any pending interrupt -- that'll cause sending */
- writel(*flags | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control);
- /* wait for controller to receive byte and check ACK */
- return twsi_wait(adap, expected_status);
+ /* Clear any pending interrupt -- that will cause sending */
+ writel(MVTWSI_CONTROL_TWSIEN | MVTWSI_CONTROL_CLEAR_IFLG,
+ &twsi->control);
+ /* Wait for controller to receive byte, and check ACK */
+ return twsi_wait(twsi, expected_status, tick);
}
/*
- * Receive a byte.
- * Global mvtwsi_control_flags variable says if we should ack or nak.
+ * twsi_recv() - Receive a byte on the I2C bus.
+ *
+ * The static variable mvtwsi_control_flags controls whether we ack or nak.
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @byte: The byte to send.
+ * @ack_flag: Flag that determines whether the received byte should
+ * be acknowledged by the controller or not (sent ACK/NAK).
+ * @tick: The duration of a clock cycle at the current I2C speed.
+ * @return Zero if status is as expected, or a non-zero code if either a time
+ * out occurred or the status was not the expected one.
*/
-static int twsi_recv(struct i2c_adapter *adap, u8 *byte, u8 *flags)
+static int twsi_recv(struct mvtwsi_registers *twsi, u8 *byte, int ack_flag,
+ uint tick)
{
- struct mvtwsi_registers *twsi = twsi_get_base(adap);
- int expected_status, status;
-
- /* compute expected status based on ACK bit in global control flags */
- if (*flags & MVTWSI_CONTROL_ACK)
- expected_status = MVTWSI_STATUS_DATA_R_ACK;
- else
- expected_status = MVTWSI_STATUS_DATA_R_NAK;
- /* acknowledge *previous state* and launch receive */
- writel(*flags | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control);
- /* wait for controller to receive byte and assert ACK or NAK */
- status = twsi_wait(adap, expected_status);
- /* if we did receive expected byte then store it */
+ int expected_status, status, control;
+
+ /* Compute expected status based on passed ACK flag */
+ expected_status = ack_flag ? MVTWSI_STATUS_DATA_R_ACK :
+ MVTWSI_STATUS_DATA_R_NAK;
+ /* Acknowledge *previous state*, and launch receive */
+ control = MVTWSI_CONTROL_TWSIEN;
+ control |= ack_flag == MVTWSI_READ_ACK ? MVTWSI_CONTROL_ACK : 0;
+ writel(control | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control);
+ /* Wait for controller to receive byte, and assert ACK or NAK */
+ status = twsi_wait(twsi, expected_status, tick);
+ /* If we did receive the expected byte, store it */
if (status == 0)
*byte = readl(&twsi->data);
- /* return status */
return status;
}
/*
- * Assert the STOP condition.
- * This is also used to force the bus back in idle (SDA=SCL=1).
+ * twsi_stop() - Assert a STOP condition on the bus.
+ *
+ * This function is also used to force the bus back to idle state (SDA =
+ * SCL = 1).
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @tick: The duration of a clock cycle at the current I2C speed.
+ * @return Zero if the operation succeeded, or a non-zero code if a time out
+ * occurred.
*/
-static int twsi_stop(struct i2c_adapter *adap, int status)
+static int twsi_stop(struct mvtwsi_registers *twsi, uint tick)
{
- struct mvtwsi_registers *twsi = twsi_get_base(adap);
int control, stop_status;
+ int status = 0;
int timeout = 1000;
- /* assert STOP */
+ /* Assert STOP */
control = MVTWSI_CONTROL_TWSIEN | MVTWSI_CONTROL_STOP;
writel(control | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control);
- /* wait for IDLE; IFLG won't rise so twsi_wait() is no use. */
+ /* Wait for IDLE; IFLG won't rise, so we can't use twsi_wait() */
do {
stop_status = readl(&twsi->status);
if (stop_status == MVTWSI_STATUS_IDLE)
break;
- udelay(10); /* one clock cycle at 100 kHz */
+ ndelay(tick); /* One clock cycle */
} while (timeout--);
control = readl(&twsi->control);
if (stop_status != MVTWSI_STATUS_IDLE)
- if (status == 0)
- status = MVTWSI_ERROR(
- MVTWSI_ERROR_TIMEOUT,
- control, status, MVTWSI_STATUS_IDLE);
+ status = mvtwsi_error(MVTWSI_ERROR_TIMEOUT,
+ control, status, MVTWSI_STATUS_IDLE);
return status;
}
-static unsigned int twsi_calc_freq(const int n, const int m)
+/*
+ * twsi_calc_freq() - Compute I2C frequency depending on m and n parameters.
+ *
+ * @n: Parameter 'n' for the frequency calculation algorithm.
+ * @m: Parameter 'm' for the frequency calculation algorithm.
+ * @return The I2C frequency corresponding to the passed m and n parameters.
+ */
+static uint twsi_calc_freq(const int n, const int m)
{
#ifdef CONFIG_SUNXI
return CONFIG_SYS_TCLK / (10 * (m + 1) * (1 << n));
@@ -281,176 +407,303 @@ static unsigned int twsi_calc_freq(const int n, const int m)
}
/*
- * Reset controller.
- * Controller reset also resets the baud rate and slave address, so
- * they must be re-established afterwards.
+ * twsi_reset() - Reset the I2C controller.
+ *
+ * Resetting the controller also resets the baud rate and slave address, hence
+ * they must be re-established after the reset.
+ *
+ * @twsi: The MVTWSI register structure to use.
*/
-static void twsi_reset(struct i2c_adapter *adap)
+static void twsi_reset(struct mvtwsi_registers *twsi)
{
- struct mvtwsi_registers *twsi = twsi_get_base(adap);
-
- /* reset controller */
+ /* Reset controller */
writel(0, &twsi->soft_reset);
- /* wait 2 ms -- this is what the Marvell LSP does */
+ /* Wait 2 ms -- this is what the Marvell LSP does */
udelay(20000);
}
/*
- * I2C init called by cmd_i2c when doing 'i2c reset'.
- * Sets baud to the highest possible value not exceeding requested one.
+ * __twsi_i2c_set_bus_speed() - Set the speed of the I2C controller.
+ *
+ * This function sets baud rate to the highest possible value that does not
+ * exceed the requested rate.
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @requested_speed: The desired frequency the controller should run at
+ * in Hz.
+ * @return The actual frequency the controller was configured to.
*/
-static unsigned int twsi_i2c_set_bus_speed(struct i2c_adapter *adap,
- unsigned int requested_speed)
+static uint __twsi_i2c_set_bus_speed(struct mvtwsi_registers *twsi,
+ uint requested_speed)
{
- struct mvtwsi_registers *twsi = twsi_get_base(adap);
- unsigned int tmp_speed, highest_speed, n, m;
- unsigned int baud = 0x44; /* baudrate at controller reset */
+ uint tmp_speed, highest_speed, n, m;
+ uint baud = 0x44; /* Baud rate after controller reset */
- /* use actual speed to collect progressively higher values */
highest_speed = 0;
- /* compute m, n setting for highest speed not above requested speed */
+ /* Successively try m, n combinations, and use the combination
+ * resulting in the largest speed that's not above the requested
+ * speed */
for (n = 0; n < 8; n++) {
for (m = 0; m < 16; m++) {
tmp_speed = twsi_calc_freq(n, m);
- if ((tmp_speed <= requested_speed)
- && (tmp_speed > highest_speed)) {
+ if ((tmp_speed <= requested_speed) &&
+ (tmp_speed > highest_speed)) {
highest_speed = tmp_speed;
baud = (m << 3) | n;
}
}
}
writel(baud, &twsi->baudrate);
- return 0;
+
+ /* Wait for controller for one tick */
+#ifdef CONFIG_DM_I2C
+ ndelay(calc_tick(highest_speed));
+#else
+ ndelay(10000);
+#endif
+ return highest_speed;
}
-static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
+/*
+ * __twsi_i2c_init() - Initialize the I2C controller.
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @speed: The initial frequency the controller should run at
+ * in Hz.
+ * @slaveadd: The I2C address to be set for the I2C master.
+ * @actual_speed: A output parameter that receives the actual frequency
+ * in Hz the controller was set to by the function.
+ * @return Zero if the operation succeeded, or a non-zero code if a time out
+ * occurred.
+ */
+static void __twsi_i2c_init(struct mvtwsi_registers *twsi, int speed,
+ int slaveadd, uint *actual_speed)
{
- struct mvtwsi_registers *twsi = twsi_get_base(adap);
-
- /* reset controller */
- twsi_reset(adap);
- /* set speed */
- twsi_i2c_set_bus_speed(adap, speed);
- /* set slave address even though we don't use it */
+ /* Reset controller */
+ twsi_reset(twsi);
+ /* Set speed */
+ *actual_speed = __twsi_i2c_set_bus_speed(twsi, speed);
+ /* Set slave address; even though we don't use it */
writel(slaveadd, &twsi->slave_address);
writel(0, &twsi->xtnd_slave_addr);
- /* assert STOP but don't care for the result */
- (void) twsi_stop(adap, 0);
+ /* Assert STOP, but don't care for the result */
+#ifdef CONFIG_DM_I2C
+ (void) twsi_stop(twsi, calc_tick(*actual_speed));
+#else
+ (void) twsi_stop(twsi, 10000);
+#endif
}
/*
- * Begin I2C transaction with expected start status, at given address.
- * Common to i2c_probe, i2c_read and i2c_write.
- * Expected address status will derive from direction bit (bit 0) in addr.
+ * i2c_begin() - Start a I2C transaction.
+ *
+ * Begin a I2C transaction with a given expected start status and chip address.
+ * A START is asserted, and the address byte is sent to the I2C controller. The
+ * expected address status will be derived from the direction bit (bit 0) of
+ * the address byte.
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @expected_start_status: The I2C status the controller is expected to
+ * assert after the address byte was sent.
+ * @addr: The address byte to be sent.
+ * @tick: The duration of a clock cycle at the current
+ * I2C speed.
+ * @return Zero if the operation succeeded, or a non-zero code if a time out or
+ * unexpected I2C status occurred.
*/
-static int i2c_begin(struct i2c_adapter *adap, int expected_start_status,
- u8 addr, u8 *flags)
+static int i2c_begin(struct mvtwsi_registers *twsi, int expected_start_status,
+ u8 addr, uint tick)
{
int status, expected_addr_status;
- /* compute expected address status from direction bit in addr */
- if (addr & 1) /* reading */
+ /* Compute the expected address status from the direction bit in
+ * the address byte */
+ if (addr & 1) /* Reading */
expected_addr_status = MVTWSI_STATUS_ADDR_R_ACK;
- else /* writing */
+ else /* Writing */
expected_addr_status = MVTWSI_STATUS_ADDR_W_ACK;
- /* assert START */
- status = twsi_start(adap, expected_start_status, flags);
- /* send out the address if the start went well */
+ /* Assert START */
+ status = twsi_start(twsi, expected_start_status, tick);
+ /* Send out the address if the start went well */
if (status == 0)
- status = twsi_send(adap, addr, expected_addr_status,
- flags);
- /* return ok or status of first failure to caller */
+ status = twsi_send(twsi, addr, expected_addr_status, tick);
+ /* Return 0, or the status of the first failure */
return status;
}
/*
- * I2C probe called by cmd_i2c when doing 'i2c probe'.
- * Begin read, nak data byte, end.
+ * __twsi_i2c_probe_chip() - Probe the given I2C chip address.
+ *
+ * This function begins a I2C read transaction, does a dummy read and NAKs; if
+ * the procedure succeeds, the chip is considered to be present.
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @chip: The chip address to probe.
+ * @tick: The duration of a clock cycle at the current I2C speed.
+ * @return Zero if the operation succeeded, or a non-zero code if a time out or
+ * unexpected I2C status occurred.
*/
-static int twsi_i2c_probe(struct i2c_adapter *adap, uchar chip)
+static int __twsi_i2c_probe_chip(struct mvtwsi_registers *twsi, uchar chip,
+ uint tick)
{
u8 dummy_byte;
- u8 flags = 0;
int status;
- /* begin i2c read */
- status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1) | 1, &flags);
- /* dummy read was accepted: receive byte but NAK it. */
+ /* Begin i2c read */
+ status = i2c_begin(twsi, MVTWSI_STATUS_START, (chip << 1) | 1, tick);
+ /* Dummy read was accepted: receive byte, but NAK it. */
if (status == 0)
- status = twsi_recv(adap, &dummy_byte, &flags);
+ status = twsi_recv(twsi, &dummy_byte, MVTWSI_READ_NAK, tick);
/* Stop transaction */
- twsi_stop(adap, 0);
- /* return 0 or status of first failure */
+ twsi_stop(twsi, tick);
+ /* Return 0, or the status of the first failure */
return status;
}
/*
- * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c
- * Begin write, send address byte(s), begin read, receive data bytes, end.
- *
- * NOTE: some EEPROMS want a stop right before the second start, while
- * some will choke if it is there. Deciding which we should do is eeprom
- * stuff, not i2c, but at the moment the APIs won't let us put it in
- * cmd_eeprom, so we have to choose here, and for the moment that'll be
- * a repeated start without a preceding stop.
+ * __twsi_i2c_read() - Read data from a I2C chip.
+ *
+ * This function begins a I2C write transaction, and transmits the address
+ * bytes; then begins a I2C read transaction, and receives the data bytes.
+ *
+ * NOTE: Some devices want a stop right before the second start, while some
+ * will choke if it is there. Since deciding this is not yet supported in
+ * higher level APIs, we need to make a decision here, and for the moment that
+ * will be a repeated start without a preceding stop.
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @chip: The chip address to read from.
+ * @addr: The address bytes to send.
+ * @alen: The length of the address bytes in bytes.
+ * @data: The buffer to receive the data read from the chip (has to have
+ * a size of at least 'length' bytes).
+ * @length: The amount of data to be read from the chip in bytes.
+ * @tick: The duration of a clock cycle at the current I2C speed.
+ * @return Zero if the operation succeeded, or a non-zero code if a time out or
+ * unexpected I2C status occurred.
*/
-static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *data, int length)
+static int __twsi_i2c_read(struct mvtwsi_registers *twsi, uchar chip,
+ u8 *addr, int alen, uchar *data, int length,
+ uint tick)
{
- int status;
- u8 flags = 0;
-
- /* begin i2c write to send the address bytes */
- status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1), &flags);
- /* send addr bytes */
- while ((status == 0) && alen--)
- status = twsi_send(adap, addr >> (8*alen),
- MVTWSI_STATUS_DATA_W_ACK, &flags);
- /* begin i2c read to receive eeprom data bytes */
- if (status == 0)
- status = i2c_begin(adap, MVTWSI_STATUS_REPEATED_START,
- (chip << 1) | 1, &flags);
- /* prepare ACK if at least one byte must be received */
- if (length > 0)
- flags |= MVTWSI_CONTROL_ACK;
- /* now receive actual bytes */
- while ((status == 0) && length--) {
- /* reset NAK if we if no more to read now */
- if (length == 0)
- flags &= ~MVTWSI_CONTROL_ACK;
- /* read current byte */
- status = twsi_recv(adap, data++, &flags);
+ int status = 0;
+ int stop_status;
+ int expected_start = MVTWSI_STATUS_START;
+
+ if (alen > 0) {
+ /* Begin i2c write to send the address bytes */
+ status = i2c_begin(twsi, expected_start, (chip << 1), tick);
+ /* Send address bytes */
+ while ((status == 0) && alen--)
+ status = twsi_send(twsi, *(addr++),
+ MVTWSI_STATUS_DATA_W_ACK, tick);
+ /* Send repeated STARTs after the initial START */
+ expected_start = MVTWSI_STATUS_REPEATED_START;
}
+ /* Begin i2c read to receive data bytes */
+ if (status == 0)
+ status = i2c_begin(twsi, expected_start, (chip << 1) | 1, tick);
+ /* Receive actual data bytes; set NAK if we if we have nothing more to
+ * read */
+ while ((status == 0) && length--)
+ status = twsi_recv(twsi, data++,
+ length > 0 ?
+ MVTWSI_READ_ACK : MVTWSI_READ_NAK, tick);
/* Stop transaction */
- status = twsi_stop(adap, status);
- /* return 0 or status of first failure */
- return status;
+ stop_status = twsi_stop(twsi, tick);
+ /* Return 0, or the status of the first failure */
+ return status != 0 ? status : stop_status;
}
/*
- * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c
- * Begin write, send address byte(s), send data bytes, end.
+ * __twsi_i2c_write() - Send data to a I2C chip.
+ *
+ * This function begins a I2C write transaction, and transmits the address
+ * bytes; then begins a new I2C write transaction, and sends the data bytes.
+ *
+ * @twsi: The MVTWSI register structure to use.
+ * @chip: The chip address to read from.
+ * @addr: The address bytes to send.
+ * @alen: The length of the address bytes in bytes.
+ * @data: The buffer containing the data to be sent to the chip.
+ * @length: The length of data to be sent to the chip in bytes.
+ * @tick: The duration of a clock cycle at the current I2C speed.
+ * @return Zero if the operation succeeded, or a non-zero code if a time out or
+ * unexpected I2C status occurred.
*/
-static int twsi_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *data, int length)
+static int __twsi_i2c_write(struct mvtwsi_registers *twsi, uchar chip,
+ u8 *addr, int alen, uchar *data, int length,
+ uint tick)
{
- int status;
- u8 flags = 0;
-
- /* begin i2c write to send the eeprom adress bytes then data bytes */
- status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1), &flags);
- /* send addr bytes */
- while ((status == 0) && alen--)
- status = twsi_send(adap, addr >> (8*alen),
- MVTWSI_STATUS_DATA_W_ACK, &flags);
- /* send data bytes */
+ int status, stop_status;
+
+ /* Begin i2c write to send first the address bytes, then the
+ * data bytes */
+ status = i2c_begin(twsi, MVTWSI_STATUS_START, (chip << 1), tick);
+ /* Send address bytes */
+ while ((status == 0) && (alen-- > 0))
+ status = twsi_send(twsi, *(addr++), MVTWSI_STATUS_DATA_W_ACK,
+ tick);
+ /* Send data bytes */
while ((status == 0) && (length-- > 0))
- status = twsi_send(adap, *(data++), MVTWSI_STATUS_DATA_W_ACK,
- &flags);
+ status = twsi_send(twsi, *(data++), MVTWSI_STATUS_DATA_W_ACK,
+ tick);
/* Stop transaction */
- status = twsi_stop(adap, status);
- /* return 0 or status of first failure */
- return status;
+ stop_status = twsi_stop(twsi, tick);
+ /* Return 0, or the status of the first failure */
+ return status != 0 ? status : stop_status;
+}
+
+#ifndef CONFIG_DM_I2C
+static void twsi_i2c_init(struct i2c_adapter *adap, int speed,
+ int slaveadd)
+{
+ struct mvtwsi_registers *twsi = twsi_get_base(adap);
+ __twsi_i2c_init(twsi, speed, slaveadd, NULL);
+}
+
+static uint twsi_i2c_set_bus_speed(struct i2c_adapter *adap,
+ uint requested_speed)
+{
+ struct mvtwsi_registers *twsi = twsi_get_base(adap);
+ __twsi_i2c_set_bus_speed(twsi, requested_speed);
+ return 0;
+}
+
+static int twsi_i2c_probe(struct i2c_adapter *adap, uchar chip)
+{
+ struct mvtwsi_registers *twsi = twsi_get_base(adap);
+ return __twsi_i2c_probe_chip(twsi, chip, 10000);
+}
+
+static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *data, int length)
+{
+ struct mvtwsi_registers *twsi = twsi_get_base(adap);
+ u8 addr_bytes[4];
+
+ addr_bytes[0] = (addr >> 0) & 0xFF;
+ addr_bytes[1] = (addr >> 8) & 0xFF;
+ addr_bytes[2] = (addr >> 16) & 0xFF;
+ addr_bytes[3] = (addr >> 24) & 0xFF;
+
+ return __twsi_i2c_read(twsi, chip, addr_bytes, alen, data, length,
+ 10000);
+}
+
+static int twsi_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *data, int length)
+{
+ struct mvtwsi_registers *twsi = twsi_get_base(adap);
+ u8 addr_bytes[4];
+
+ addr_bytes[0] = (addr >> 0) & 0xFF;
+ addr_bytes[1] = (addr >> 8) & 0xFF;
+ addr_bytes[2] = (addr >> 16) & 0xFF;
+ addr_bytes[3] = (addr >> 24) & 0xFF;
+
+ return __twsi_i2c_write(twsi, chip, addr_bytes, alen, data, length,
+ 10000);
}
#ifdef CONFIG_I2C_MVTWSI_BASE0
@@ -494,3 +747,99 @@ U_BOOT_I2C_ADAP_COMPLETE(twsi5, twsi_i2c_init, twsi_i2c_probe,
CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 5)
#endif
+#else /* CONFIG_DM_I2C */
+
+static int mvtwsi_i2c_probe_chip(struct udevice *bus, u32 chip_addr,
+ u32 chip_flags)
+{
+ struct mvtwsi_i2c_dev *dev = dev_get_priv(bus);
+ return __twsi_i2c_probe_chip(dev->base, chip_addr, dev->tick);
+}
+
+static int mvtwsi_i2c_set_bus_speed(struct udevice *bus, uint speed)
+{
+ struct mvtwsi_i2c_dev *dev = dev_get_priv(bus);
+
+ dev->speed = __twsi_i2c_set_bus_speed(dev->base, speed);
+ dev->tick = calc_tick(dev->speed);
+
+ return 0;
+}
+
+static int mvtwsi_i2c_ofdata_to_platdata(struct udevice *bus)
+{
+ struct mvtwsi_i2c_dev *dev = dev_get_priv(bus);
+
+ dev->base = dev_get_addr_ptr(bus);
+
+ if (!dev->base)
+ return -ENOMEM;
+
+ dev->index = fdtdec_get_int(gd->fdt_blob, bus->of_offset,
+ "cell-index", -1);
+ dev->slaveadd = fdtdec_get_int(gd->fdt_blob, bus->of_offset,
+ "u-boot,i2c-slave-addr", 0x0);
+ dev->speed = fdtdec_get_int(gd->fdt_blob, bus->of_offset,
+ "clock-frequency", 100000);
+ return 0;
+}
+
+static int mvtwsi_i2c_probe(struct udevice *bus)
+{
+ struct mvtwsi_i2c_dev *dev = dev_get_priv(bus);
+ uint actual_speed;
+
+ __twsi_i2c_init(dev->base, dev->speed, dev->slaveadd, &actual_speed);
+ dev->speed = actual_speed;
+ dev->tick = calc_tick(dev->speed);
+ return 0;
+}
+
+static int mvtwsi_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
+{
+ struct mvtwsi_i2c_dev *dev = dev_get_priv(bus);
+ struct i2c_msg *dmsg, *omsg, dummy;
+
+ memset(&dummy, 0, sizeof(struct i2c_msg));
+
+ /* We expect either two messages (one with an offset and one with the
+ * actual data) or one message (just data or offset/data combined) */
+ if (nmsgs > 2 || nmsgs == 0) {
+ debug("%s: Only one or two messages are supported.", __func__);
+ return -1;
+ }
+
+ omsg = nmsgs == 1 ? &dummy : msg;
+ dmsg = nmsgs == 1 ? msg : msg + 1;
+
+ if (dmsg->flags & I2C_M_RD)
+ return __twsi_i2c_read(dev->base, dmsg->addr, omsg->buf,
+ omsg->len, dmsg->buf, dmsg->len,
+ dev->tick);
+ else
+ return __twsi_i2c_write(dev->base, dmsg->addr, omsg->buf,
+ omsg->len, dmsg->buf, dmsg->len,
+ dev->tick);
+}
+
+static const struct dm_i2c_ops mvtwsi_i2c_ops = {
+ .xfer = mvtwsi_i2c_xfer,
+ .probe_chip = mvtwsi_i2c_probe_chip,
+ .set_bus_speed = mvtwsi_i2c_set_bus_speed,
+};
+
+static const struct udevice_id mvtwsi_i2c_ids[] = {
+ { .compatible = "marvell,mv64xxx-i2c", },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(i2c_mvtwsi) = {
+ .name = "i2c_mvtwsi",
+ .id = UCLASS_I2C,
+ .of_match = mvtwsi_i2c_ids,
+ .probe = mvtwsi_i2c_probe,
+ .ofdata_to_platdata = mvtwsi_i2c_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct mvtwsi_i2c_dev),
+ .ops = &mvtwsi_i2c_ops,
+};
+#endif /* CONFIG_DM_I2C */
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index a7f3fb4..0006343 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -39,6 +39,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <i2c.h>
#include <asm/arch/i2c.h>
@@ -53,10 +54,14 @@ DECLARE_GLOBAL_DATA_PTR;
/* Absolutely safe for status update at 100 kHz I2C: */
#define I2C_WAIT 200
-static int wait_for_bb(struct i2c_adapter *adap);
-static struct i2c *omap24_get_base(struct i2c_adapter *adap);
-static u16 wait_for_event(struct i2c_adapter *adap);
-static void flush_fifo(struct i2c_adapter *adap);
+struct omap_i2c {
+ struct udevice *clk;
+ struct i2c *regs;
+ unsigned int speed;
+ int waitdelay;
+ int clk_id;
+};
+
static int omap24_i2c_findpsc(u32 *pscl, u32 *psch, uint speed)
{
unsigned int sampleclk, prescaler;
@@ -90,9 +95,96 @@ static int omap24_i2c_findpsc(u32 *pscl, u32 *psch, uint speed)
}
return -1;
}
-static uint omap24_i2c_setspeed(struct i2c_adapter *adap, uint speed)
+
+/*
+ * Wait for the bus to be free by checking the Bus Busy (BB)
+ * bit to become clear
+ */
+static int wait_for_bb(struct i2c *i2c_base, int waitdelay)
+{
+ int timeout = I2C_TIMEOUT;
+ u16 stat;
+
+ writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+ while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
+#else
+ /* Read RAW status */
+ while ((stat = readw(&i2c_base->irqstatus_raw) &
+ I2C_STAT_BB) && timeout--) {
+#endif
+ writew(stat, &i2c_base->stat);
+ udelay(waitdelay);
+ }
+
+ if (timeout <= 0) {
+ printf("Timed out in wait_for_bb: status=%04x\n",
+ stat);
+ return 1;
+ }
+ writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
+ return 0;
+}
+
+/*
+ * Wait for the I2C controller to complete current action
+ * and update status
+ */
+static u16 wait_for_event(struct i2c *i2c_base, int waitdelay)
+{
+ u16 status;
+ int timeout = I2C_TIMEOUT;
+
+ do {
+ udelay(waitdelay);
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+ status = readw(&i2c_base->stat);
+#else
+ /* Read RAW status */
+ status = readw(&i2c_base->irqstatus_raw);
+#endif
+ } while (!(status &
+ (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
+ I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
+ I2C_STAT_AL)) && timeout--);
+
+ if (timeout <= 0) {
+ printf("Timed out in wait_for_event: status=%04x\n",
+ status);
+ /*
+ * If status is still 0 here, probably the bus pads have
+ * not been configured for I2C, and/or pull-ups are missing.
+ */
+ printf("Check if pads/pull-ups of bus are properly configured\n");
+ writew(0xFFFF, &i2c_base->stat);
+ status = 0;
+ }
+
+ return status;
+}
+
+static void flush_fifo(struct i2c *i2c_base)
+{
+ u16 stat;
+
+ /*
+ * note: if you try and read data when its not there or ready
+ * you get a bus error
+ */
+ while (1) {
+ stat = readw(&i2c_base->stat);
+ if (stat == I2C_STAT_RRDY) {
+ readb(&i2c_base->data);
+ writew(I2C_STAT_RRDY, &i2c_base->stat);
+ udelay(1000);
+ } else
+ break;
+ }
+}
+
+static int __omap24_i2c_setspeed(struct i2c *i2c_base, uint speed,
+ int *waitdelay)
{
- struct i2c *i2c_base = omap24_get_base(adap);
int psc, fsscll = 0, fssclh = 0;
int hsscll = 0, hssclh = 0;
u32 scll = 0, sclh = 0;
@@ -142,8 +234,7 @@ static uint omap24_i2c_setspeed(struct i2c_adapter *adap, uint speed)
}
}
- adap->speed = speed;
- adap->waitdelay = (10000000 / speed) * 2; /* wait for 20 clkperiods */
+ *waitdelay = (10000000 / speed) * 2; /* wait for 20 clkperiods */
writew(0, &i2c_base->con);
writew(psc, &i2c_base->psc);
writew(scll, &i2c_base->scll);
@@ -154,9 +245,8 @@ static uint omap24_i2c_setspeed(struct i2c_adapter *adap, uint speed)
return 0;
}
-static void omap24_i2c_deblock(struct i2c_adapter *adap)
+static void omap24_i2c_deblock(struct i2c *i2c_base)
{
- struct i2c *i2c_base = omap24_get_base(adap);
int i;
u16 systest;
u16 orgsystest;
@@ -200,9 +290,9 @@ static void omap24_i2c_deblock(struct i2c_adapter *adap)
writew(orgsystest, &i2c_base->systest);
}
-static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
+static void __omap24_i2c_init(struct i2c *i2c_base, int speed, int slaveadd,
+ int *waitdelay)
{
- struct i2c *i2c_base = omap24_get_base(adap);
int timeout = I2C_TIMEOUT;
int deblock = 1;
@@ -224,7 +314,7 @@ retry:
udelay(1000);
}
- if (0 != omap24_i2c_setspeed(adap, speed)) {
+ if (0 != __omap24_i2c_setspeed(i2c_base, speed, waitdelay)) {
printf("ERROR: failed to setup I2C bus-speed!\n");
return;
}
@@ -241,45 +331,24 @@ retry:
I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
#endif
udelay(1000);
- flush_fifo(adap);
+ flush_fifo(i2c_base);
writew(0xFFFF, &i2c_base->stat);
/* Handle possible failed I2C state */
- if (wait_for_bb(adap))
+ if (wait_for_bb(i2c_base, *waitdelay))
if (deblock == 1) {
- omap24_i2c_deblock(adap);
+ omap24_i2c_deblock(i2c_base);
deblock = 0;
goto retry;
}
}
-static void flush_fifo(struct i2c_adapter *adap)
-{
- struct i2c *i2c_base = omap24_get_base(adap);
- u16 stat;
-
- /*
- * note: if you try and read data when its not there or ready
- * you get a bus error
- */
- while (1) {
- stat = readw(&i2c_base->stat);
- if (stat == I2C_STAT_RRDY) {
- readb(&i2c_base->data);
- writew(I2C_STAT_RRDY, &i2c_base->stat);
- udelay(1000);
- } else
- break;
- }
-}
-
/*
* i2c_probe: Use write access. Allows to identify addresses that are
* write-only (like the config register of dual-port EEPROMs)
*/
-static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
+static int __omap24_i2c_probe(struct i2c *i2c_base, int waitdelay, uchar chip)
{
- struct i2c *i2c_base = omap24_get_base(adap);
u16 status;
int res = 1; /* default = fail */
@@ -287,7 +356,7 @@ static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
return res;
/* Wait until bus is free */
- if (wait_for_bb(adap))
+ if (wait_for_bb(i2c_base, waitdelay))
return res;
/* No data transfer, slave addr only */
@@ -296,7 +365,7 @@ static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
I2C_CON_STP, &i2c_base->con);
- status = wait_for_event(adap);
+ status = wait_for_event(i2c_base, waitdelay);
if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
/*
@@ -306,8 +375,8 @@ static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
* following 'if' section:
*/
if (status == I2C_STAT_XRDY)
- printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
- adap->hwadapnr, status);
+ printf("i2c_probe: pads on bus probably not configured (status=0x%x)\n",
+ status);
goto pr_exit;
}
@@ -315,7 +384,7 @@ static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
/* Check for ACK (!NAK) */
if (!(status & I2C_STAT_NACK)) {
res = 0; /* Device found */
- udelay(adap->waitdelay);/* Required by AM335X in SPL */
+ udelay(waitdelay);/* Required by AM335X in SPL */
/* Abort transfer (force idle state) */
writew(I2C_CON_MST | I2C_CON_TRX, &i2c_base->con); /* Reset */
udelay(1000);
@@ -323,7 +392,7 @@ static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
I2C_CON_STP, &i2c_base->con); /* STP */
}
pr_exit:
- flush_fifo(adap);
+ flush_fifo(i2c_base);
writew(0xFFFF, &i2c_base->stat);
return res;
}
@@ -341,10 +410,9 @@ pr_exit:
* or that do not need a register address at all (such as some clock
* distributors).
*/
-static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *buffer, int len)
+static int __omap24_i2c_read(struct i2c *i2c_base, int waitdelay, uchar chip,
+ uint addr, int alen, uchar *buffer, int len)
{
- struct i2c *i2c_base = omap24_get_base(adap);
int i2c_error = 0;
u16 status;
@@ -389,7 +457,7 @@ static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
#endif
/* Wait until bus not busy */
- if (wait_for_bb(adap))
+ if (wait_for_bb(i2c_base, waitdelay))
return 1;
/* Zero, one or two bytes reg address (offset) */
@@ -410,12 +478,12 @@ static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
#endif
/* Send register offset */
while (1) {
- status = wait_for_event(adap);
+ status = wait_for_event(i2c_base, waitdelay);
/* Try to identify bus that is not padconf'd for I2C */
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
- printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
- adap->hwadapnr, status);
+ printf("i2c_read (addr phase): pads on bus probably not configured (status=0x%x)\n",
+ status);
goto rd_exit;
}
if (status == 0 || (status & I2C_STAT_NACK)) {
@@ -450,7 +518,7 @@ static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
/* Receive data */
while (1) {
- status = wait_for_event(adap);
+ status = wait_for_event(i2c_base, waitdelay);
/*
* Try to identify bus that is not padconf'd for I2C. This
* state could be left over from previous transactions if
@@ -458,8 +526,8 @@ static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
*/
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
- printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
- adap->hwadapnr, status);
+ printf("i2c_read (data phase): pads on bus probably not configured (status=0x%x)\n",
+ status);
goto rd_exit;
}
if (status == 0 || (status & I2C_STAT_NACK)) {
@@ -477,16 +545,15 @@ static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
}
rd_exit:
- flush_fifo(adap);
+ flush_fifo(i2c_base);
writew(0xFFFF, &i2c_base->stat);
return i2c_error;
}
/* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
-static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *buffer, int len)
+static int __omap24_i2c_write(struct i2c *i2c_base, int waitdelay, uchar chip,
+ uint addr, int alen, uchar *buffer, int len)
{
- struct i2c *i2c_base = omap24_get_base(adap);
int i;
u16 status;
int i2c_error = 0;
@@ -536,7 +603,7 @@ static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
#endif
/* Wait until bus not busy */
- if (wait_for_bb(adap))
+ if (wait_for_bb(i2c_base, waitdelay))
return 1;
/* Start address phase - will write regoffset + len bytes data */
@@ -549,12 +616,12 @@ static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
while (alen) {
/* Must write reg offset (one or two bytes) */
- status = wait_for_event(adap);
+ status = wait_for_event(i2c_base, waitdelay);
/* Try to identify bus that is not padconf'd for I2C */
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
- printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
- adap->hwadapnr, status);
+ printf("i2c_write: pads on bus probably not configured (status=0x%x)\n",
+ status);
goto wr_exit;
}
if (status == 0 || (status & I2C_STAT_NACK)) {
@@ -576,7 +643,7 @@ static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
}
/* Address phase is over, now write data */
for (i = 0; i < len; i++) {
- status = wait_for_event(adap);
+ status = wait_for_event(i2c_base, waitdelay);
if (status == 0 || (status & I2C_STAT_NACK)) {
i2c_error = 1;
printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
@@ -598,87 +665,22 @@ static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
* transferred on the bus.
*/
do {
- status = wait_for_event(adap);
+ status = wait_for_event(i2c_base, waitdelay);
} while (!(status & I2C_STAT_ARDY) && timeout--);
if (timeout <= 0)
printf("i2c_write: timed out writig last byte!\n");
wr_exit:
- flush_fifo(adap);
+ flush_fifo(i2c_base);
writew(0xFFFF, &i2c_base->stat);
return i2c_error;
}
+#ifndef CONFIG_DM_I2C
/*
- * Wait for the bus to be free by checking the Bus Busy (BB)
- * bit to become clear
- */
-static int wait_for_bb(struct i2c_adapter *adap)
-{
- struct i2c *i2c_base = omap24_get_base(adap);
- int timeout = I2C_TIMEOUT;
- u16 stat;
-
- writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
- while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
-#else
- /* Read RAW status */
- while ((stat = readw(&i2c_base->irqstatus_raw) &
- I2C_STAT_BB) && timeout--) {
-#endif
- writew(stat, &i2c_base->stat);
- udelay(adap->waitdelay);
- }
-
- if (timeout <= 0) {
- printf("Timed out in wait_for_bb: status=%04x\n",
- stat);
- return 1;
- }
- writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
- return 0;
-}
-
-/*
- * Wait for the I2C controller to complete current action
- * and update status
+ * The legacy I2C functions. These need to get removed once
+ * all users of this driver are converted to DM.
*/
-static u16 wait_for_event(struct i2c_adapter *adap)
-{
- struct i2c *i2c_base = omap24_get_base(adap);
- u16 status;
- int timeout = I2C_TIMEOUT;
-
- do {
- udelay(adap->waitdelay);
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
- status = readw(&i2c_base->stat);
-#else
- /* Read RAW status */
- status = readw(&i2c_base->irqstatus_raw);
-#endif
- } while (!(status &
- (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
- I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
- I2C_STAT_AL)) && timeout--);
-
- if (timeout <= 0) {
- printf("Timed out in wait_for_event: status=%04x\n",
- status);
- /*
- * If status is still 0 here, probably the bus pads have
- * not been configured for I2C, and/or pull-ups are missing.
- */
- printf("Check if pads/pull-ups of bus %d are properly configured\n",
- adap->hwadapnr);
- writew(0xFFFF, &i2c_base->stat);
- status = 0;
- }
-
- return status;
-}
-
static struct i2c *omap24_get_base(struct i2c_adapter *adap)
{
switch (adap->hwadapnr) {
@@ -710,6 +712,56 @@ static struct i2c *omap24_get_base(struct i2c_adapter *adap)
return NULL;
}
+
+static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
+{
+ struct i2c *i2c_base = omap24_get_base(adap);
+
+ return __omap24_i2c_read(i2c_base, adap->waitdelay, chip, addr,
+ alen, buffer, len);
+}
+
+
+static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
+{
+ struct i2c *i2c_base = omap24_get_base(adap);
+
+ return __omap24_i2c_write(i2c_base, adap->waitdelay, chip, addr,
+ alen, buffer, len);
+}
+
+static uint omap24_i2c_setspeed(struct i2c_adapter *adap, uint speed)
+{
+ struct i2c *i2c_base = omap24_get_base(adap);
+ int ret;
+
+ ret = __omap24_i2c_setspeed(i2c_base, speed, &adap->waitdelay);
+ if (ret) {
+ error("%s: set i2c speed failed\n", __func__);
+ return ret;
+ }
+
+ adap->speed = speed;
+
+ return 0;
+}
+
+static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
+{
+ struct i2c *i2c_base = omap24_get_base(adap);
+
+ return __omap24_i2c_init(i2c_base, speed, slaveadd, &adap->waitdelay);
+}
+
+static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
+{
+ struct i2c *i2c_base = omap24_get_base(adap);
+
+ return __omap24_i2c_probe(i2c_base, adap->waitdelay, chip);
+}
+
#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED1)
#define CONFIG_SYS_OMAP24_I2C_SPEED1 CONFIG_SYS_OMAP24_I2C_SPEED
#endif
@@ -769,3 +821,92 @@ U_BOOT_I2C_ADAP_COMPLETE(omap24_4, omap24_i2c_init, omap24_i2c_probe,
#endif
#endif
#endif
+
+#else /* CONFIG_DM_I2C */
+
+static int omap_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
+{
+ struct omap_i2c *priv = dev_get_priv(bus);
+ int ret;
+
+ debug("i2c_xfer: %d messages\n", nmsgs);
+ for (; nmsgs > 0; nmsgs--, msg++) {
+ debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+ if (msg->flags & I2C_M_RD) {
+ ret = __omap24_i2c_read(priv->regs, priv->waitdelay,
+ msg->addr, 0, 0, msg->buf,
+ msg->len);
+ } else {
+ ret = __omap24_i2c_write(priv->regs, priv->waitdelay,
+ msg->addr, 0, 0, msg->buf,
+ msg->len);
+ }
+ if (ret) {
+ debug("i2c_write: error sending\n");
+ return -EREMOTEIO;
+ }
+ }
+
+ return 0;
+}
+
+static int omap_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+ struct omap_i2c *priv = dev_get_priv(bus);
+
+ priv->speed = speed;
+
+ return __omap24_i2c_setspeed(priv->regs, speed, &priv->waitdelay);
+}
+
+static int omap_i2c_probe_chip(struct udevice *bus, uint chip_addr,
+ uint chip_flags)
+{
+ struct omap_i2c *priv = dev_get_priv(bus);
+
+ return __omap24_i2c_probe(priv->regs, priv->waitdelay, chip_addr);
+}
+
+static int omap_i2c_probe(struct udevice *bus)
+{
+ struct omap_i2c *priv = dev_get_priv(bus);
+
+ __omap24_i2c_init(priv->regs, priv->speed, 0, &priv->waitdelay);
+
+ return 0;
+}
+
+static int omap_i2c_ofdata_to_platdata(struct udevice *bus)
+{
+ struct omap_i2c *priv = dev_get_priv(bus);
+
+ priv->regs = map_physmem(dev_get_addr(bus), sizeof(void *),
+ MAP_NOCACHE);
+ priv->speed = CONFIG_SYS_OMAP24_I2C_SPEED;
+
+ return 0;
+}
+
+static const struct dm_i2c_ops omap_i2c_ops = {
+ .xfer = omap_i2c_xfer,
+ .probe_chip = omap_i2c_probe_chip,
+ .set_bus_speed = omap_i2c_set_bus_speed,
+};
+
+static const struct udevice_id omap_i2c_ids[] = {
+ { .compatible = "ti,omap4-i2c" },
+ { }
+};
+
+U_BOOT_DRIVER(i2c_omap) = {
+ .name = "i2c_omap",
+ .id = UCLASS_I2C,
+ .of_match = omap_i2c_ids,
+ .ofdata_to_platdata = omap_i2c_ofdata_to_platdata,
+ .probe = omap_i2c_probe,
+ .priv_auto_alloc_size = sizeof(struct omap_i2c),
+ .ops = &omap_i2c_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+
+#endif /* CONFIG_DM_I2C */
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index e0adb9b..dc8f2b6 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -61,6 +61,12 @@ config ZYNQ_SDHCI
help
Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+config ROCKCHIP_SDHCI
+ bool "Arasan SDHCI controller for Rockchip support"
+ depends on DM_MMC && BLK && DM_MMC_OPS
+ help
+ Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
+
config MMC_UNIPHIER
bool "UniPhier SD/MMC Host Controller support"
depends on ARCH_UNIPHIER
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index b44a12e..18351fb 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o
obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
obj-$(CONFIG_MMC_UNIPHIER) += uniphier-sd.o
obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
+obj-$(CONFIG_ROCKCHIP_SDHCI) += rockchip_sdhci.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c
new file mode 100644
index 0000000..023c29b
--- /dev/null
+++ b/drivers/mmc/rockchip_sdhci.c
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Rockchip SD Host Controller Interface
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+/* 400KHz is max freq for card ID etc. Use that as min */
+#define EMMC_MIN_FREQ 400000
+
+struct rockchip_sdhc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+struct rockchip_sdhc {
+ struct sdhci_host host;
+ void *base;
+};
+
+static int arasan_sdhci_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct rockchip_sdhc_plat *plat = dev_get_platdata(dev);
+ struct rockchip_sdhc *prv = dev_get_priv(dev);
+ struct sdhci_host *host = &prv->host;
+ int ret;
+ u32 caps;
+
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+ host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
+
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width,
+ caps, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ, EMMC_MIN_FREQ,
+ host->version, host->quirks, 0);
+
+ host->mmc = &plat->mmc;
+ if (ret)
+ return ret;
+ host->mmc->priv = &prv->host;
+ host->mmc->dev = dev;
+ upriv->mmc = host->mmc;
+
+ return sdhci_probe(dev);
+}
+
+static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
+{
+ struct sdhci_host *host = dev_get_priv(dev);
+
+ host->name = dev->name;
+ host->ioaddr = dev_get_addr_ptr(dev);
+
+ return 0;
+}
+
+static int rockchip_sdhci_bind(struct udevice *dev)
+{
+ struct rockchip_sdhc_plat *plat = dev_get_platdata(dev);
+ int ret;
+
+ ret = sdhci_bind(dev, &plat->mmc, &plat->cfg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct udevice_id arasan_sdhci_ids[] = {
+ { .compatible = "arasan,sdhci-5.1" },
+ { }
+};
+
+U_BOOT_DRIVER(arasan_sdhci_drv) = {
+ .name = "arasan_sdhci",
+ .id = UCLASS_MMC,
+ .of_match = arasan_sdhci_ids,
+ .ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
+ .ops = &sdhci_ops,
+ .bind = rockchip_sdhci_bind,
+ .probe = arasan_sdhci_probe,
+ .priv_auto_alloc_size = sizeof(struct rockchip_sdhc),
+ .platdata_auto_alloc_size = sizeof(struct rockchip_sdhc_plat),
+};
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 493cdc6..344fbe2 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -39,3 +39,4 @@ obj-$(CONFIG_PPC_T4080) += t4240.o
obj-$(CONFIG_PPC_B4420) += b4860.o
obj-$(CONFIG_PPC_B4860) += b4860.o
obj-$(CONFIG_LS1043A) += ls1043.o
+obj-$(CONFIG_LS1046A) += ls1046.o
diff --git a/drivers/net/fm/ls1046.c b/drivers/net/fm/ls1046.c
new file mode 100644
index 0000000..bf55554
--- /dev/null
+++ b/drivers/net/fm/ls1046.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+
+#define FSL_CHASSIS2_RCWSR13_EC1 0xe0000000 /* bits 416..418 */
+#define FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII 0x00000000
+#define FSL_CHASSIS2_RCWSR13_EC1_GPIO 0x20000000
+#define FSL_CHASSIS2_RCWSR13_EC1_FTM 0xa0000000
+#define FSL_CHASSIS2_RCWSR13_EC2 0x1c000000 /* bits 419..421 */
+#define FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII 0x00000000
+#define FSL_CHASSIS2_RCWSR13_EC2_GPIO 0x04000000
+#define FSL_CHASSIS2_RCWSR13_EC2_1588 0x08000000
+#define FSL_CHASSIS2_RCWSR13_EC2_FTM 0x14000000
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CHASSIS2_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CHASSIS2_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CHASSIS2_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CHASSIS2_DEVDISR2_DTSEC1_4,
+ [FM1_DTSEC5] = FSL_CHASSIS2_DEVDISR2_DTSEC1_5,
+ [FM1_DTSEC6] = FSL_CHASSIS2_DEVDISR2_DTSEC1_6,
+ [FM1_DTSEC9] = FSL_CHASSIS2_DEVDISR2_DTSEC1_9,
+ [FM1_DTSEC10] = FSL_CHASSIS2_DEVDISR2_DTSEC1_10,
+ [FM1_10GEC1] = FSL_CHASSIS2_DEVDISR2_10GEC1_1,
+ [FM1_10GEC2] = FSL_CHASSIS2_DEVDISR2_10GEC1_2,
+ [FM1_10GEC3] = FSL_CHASSIS2_DEVDISR2_10GEC1_3,
+ [FM1_10GEC4] = FSL_CHASSIS2_DEVDISR2_10GEC1_4,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1) && (is_serdes_configured(XFI_FM1_MAC9)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM1_DTSEC9) && (is_serdes_configured(XFI_FM1_MAC9)))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC2) && (is_serdes_configured(XFI_FM1_MAC10)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM1_DTSEC10) && (is_serdes_configured(XFI_FM1_MAC10)))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if (port == FM1_DTSEC3)
+ if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
+ FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII)
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if (port == FM1_DTSEC4)
+ if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
+ FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII)
+ return PHY_INTERFACE_MODE_RGMII;
+
+ /* handle SGMII, only MAC 2/5/6/9/10 available */
+ switch (port) {
+ case FM1_DTSEC2:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ case FM1_DTSEC9:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(SGMII_FM1_DTSEC2 + port - FM1_DTSEC2))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ break;
+ }
+
+ /* handle 2.5G SGMII, only MAC 5/9/10 available */
+ switch (port) {
+ case FM1_DTSEC5:
+ case FM1_DTSEC9:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(SGMII_2500_FM1_DTSEC5 +
+ port - FM1_DTSEC5))
+ return PHY_INTERFACE_MODE_SGMII_2500;
+ break;
+ default:
+ break;
+ }
+
+ /* handle QSGMII, only MAC 1/5/6/10 available */
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(QSGMII_FM1_A))
+ return PHY_INTERFACE_MODE_QSGMII;
+ break;
+ default:
+ break;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1785e3b..2972dba 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -123,21 +123,21 @@ config QCA953X_PINCTRL
both the GPIO definitions and pin control functions for each
available multiplex function.
-config ROCKCHIP_PINCTRL
- bool "Rockchip pin control driver"
+config ROCKCHIP_RK3036_PINCTRL
+ bool "Rockchip rk3036 pin control driver"
depends on DM
help
- Support pin multiplexing control on Rockchip SoCs. The driver is
+ Support pin multiplexing control on Rockchip rk3036 SoCs. The driver is
controlled by a device tree node which contains both the GPIO
definitions and pin control functions for each available multiplex
function.
-config ROCKCHIP_3036_PINCTRL
- bool "Rockchip rk3036 pin control driver"
+config ROCKCHIP_RK3288_PINCTRL
+ bool "Rockchip pin control driver"
depends on DM
help
- Support pin multiplexing control on Rockchip rk3036 SoCs. The driver is
- controlled by a device tree node which contains both the GPIO
+ Support pin multiplexing control on Rockchip rk3288 SoCs. The driver
+ is controlled by a device tree node which contains both the GPIO
definitions and pin control functions for each available multiplex
function.
diff --git a/drivers/pinctrl/rockchip/Makefile b/drivers/pinctrl/rockchip/Makefile
index 6fa7d00..64e9587 100644
--- a/drivers/pinctrl/rockchip/Makefile
+++ b/drivers/pinctrl/rockchip/Makefile
@@ -5,5 +5,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_ROCKCHIP_PINCTRL) += pinctrl_rk3288.o
-obj-$(CONFIG_ROCKCHIP_3036_PINCTRL) += pinctrl_rk3036.o
+obj-$(CONFIG_ROCKCHIP_RK3036_PINCTRL) += pinctrl_rk3036.o
+obj-$(CONFIG_ROCKCHIP_RK3288_PINCTRL) += pinctrl_rk3288.o
diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c
index a23278d..029927f 100644
--- a/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/drivers/usb/gadget/dwc2_udc_otg.c
@@ -403,6 +403,7 @@ static void reconfig_usbd(struct dwc2_udc *dev)
int i;
unsigned int uTemp = writel(CORE_SOFT_RESET, &reg->grstctl);
uint32_t dflt_gusbcfg;
+ uint32_t rx_fifo_sz, tx_fifo_sz, np_tx_fifo_sz;
debug("Reseting OTG controller\n");
@@ -467,18 +468,27 @@ static void reconfig_usbd(struct dwc2_udc *dev)
/* 10. Unmask device IN EP common interrupts*/
writel(DIEPMSK_INIT, &reg->diepmsk);
+ rx_fifo_sz = RX_FIFO_SIZE;
+ np_tx_fifo_sz = NPTX_FIFO_SIZE;
+ tx_fifo_sz = PTX_FIFO_SIZE;
+
+ if (dev->pdata->rx_fifo_sz)
+ rx_fifo_sz = dev->pdata->rx_fifo_sz;
+ if (dev->pdata->np_tx_fifo_sz)
+ np_tx_fifo_sz = dev->pdata->np_tx_fifo_sz;
+ if (dev->pdata->tx_fifo_sz)
+ tx_fifo_sz = dev->pdata->tx_fifo_sz;
+
/* 11. Set Rx FIFO Size (in 32-bit words) */
- writel(RX_FIFO_SIZE >> 2, &reg->grxfsiz);
+ writel(rx_fifo_sz, &reg->grxfsiz);
/* 12. Set Non Periodic Tx FIFO Size */
- writel((NPTX_FIFO_SIZE >> 2) << 16 | ((RX_FIFO_SIZE >> 2)) << 0,
+ writel((np_tx_fifo_sz << 16) | rx_fifo_sz,
&reg->gnptxfsiz);
for (i = 1; i < DWC2_MAX_HW_ENDPOINTS; i++)
- writel((PTX_FIFO_SIZE >> 2) << 16 |
- ((RX_FIFO_SIZE + NPTX_FIFO_SIZE +
- PTX_FIFO_SIZE*(i-1)) >> 2) << 0,
- &reg->dieptxf[i-1]);
+ writel((rx_fifo_sz + np_tx_fifo_sz + tx_fifo_sz*(i-1)) |
+ tx_fifo_sz << 16, &reg->dieptxf[i-1]);
/* Flush the RX FIFO */
writel(RX_FIFO_FLUSH, &reg->grstctl);
diff --git a/drivers/usb/gadget/dwc2_udc_otg_regs.h b/drivers/usb/gadget/dwc2_udc_otg_regs.h
index 78ec90e..c94396a 100644
--- a/drivers/usb/gadget/dwc2_udc_otg_regs.h
+++ b/drivers/usb/gadget/dwc2_udc_otg_regs.h
@@ -130,9 +130,9 @@ struct dwc2_usbotg_reg {
#define HIGH_SPEED_CONTROL_PKT_SIZE 64
#define HIGH_SPEED_BULK_PKT_SIZE 512
-#define RX_FIFO_SIZE (1024*4)
-#define NPTX_FIFO_SIZE (1024*4)
-#define PTX_FIFO_SIZE (1536*1)
+#define RX_FIFO_SIZE (1024)
+#define NPTX_FIFO_SIZE (1024)
+#define PTX_FIFO_SIZE (384)
#define DEPCTL_TXFNUM_0 (0x0<<22)
#define DEPCTL_TXFNUM_1 (0x1<<22)
diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
index 12f5c85..0d6d2fb 100644
--- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
+++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
@@ -110,6 +110,9 @@ static int setdma_rx(struct dwc2_ep *ep, struct dwc2_request *req)
ctrl = readl(&reg->out_endp[ep_num].doepctl);
+ invalidate_dcache_range((unsigned long) ep->dma_buf,
+ (unsigned long) ep->dma_buf + ep->len);
+
writel((unsigned int) ep->dma_buf, &reg->out_endp[ep_num].doepdma);
writel(DOEPT_SIZ_PKT_CNT(pktcnt) | DOEPT_SIZ_XFER_SIZE(length),
&reg->out_endp[ep_num].doeptsiz);
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 93d147e..4e548c2 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -7,3 +7,4 @@
obj-$(CONFIG_TWL4030_USB) += twl4030.o
obj-$(CONFIG_OMAP_USB_PHY) += omap_usb_phy.o
+obj-$(CONFIG_ROCKCHIP_USB2_PHY) += rockchip_usb2_phy.o
diff --git a/drivers/usb/phy/rockchip_usb2_phy.c b/drivers/usb/phy/rockchip_usb2_phy.c
new file mode 100644
index 0000000..1958478
--- /dev/null
+++ b/drivers/usb/phy/rockchip_usb2_phy.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <libfdt.h>
+
+#include "../gadget/dwc2_udc_otg_priv.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define BIT_WRITEABLE_SHIFT 16
+
+struct usb2phy_reg {
+ unsigned int offset;
+ unsigned int bitend;
+ unsigned int bitstart;
+ unsigned int disable;
+ unsigned int enable;
+};
+
+/**
+ * struct rockchip_usb2_phy_cfg: usb-phy port configuration
+ * @port_reset: usb otg per-port reset register
+ * @soft_con: software control usb otg register
+ * @suspend: phy suspend register
+ */
+struct rockchip_usb2_phy_cfg {
+ struct usb2phy_reg port_reset;
+ struct usb2phy_reg soft_con;
+ struct usb2phy_reg suspend;
+};
+
+struct rockchip_usb2_phy_dt_id {
+ char compatible[128];
+ const void *data;
+};
+
+static const struct rockchip_usb2_phy_cfg rk3288_pdata = {
+ .port_reset = {0x00, 12, 12, 0, 1},
+ .soft_con = {0x08, 2, 2, 0, 1},
+ .suspend = {0x0c, 5, 0, 0x01, 0x2A},
+};
+
+static struct rockchip_usb2_phy_dt_id rockchip_usb2_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata },
+ {}
+};
+
+static void property_enable(struct dwc2_plat_otg_data *pdata,
+ const struct usb2phy_reg *reg, bool en)
+{
+ unsigned int val, mask, tmp;
+
+ tmp = en ? reg->enable : reg->disable;
+ mask = GENMASK(reg->bitend, reg->bitstart);
+ val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+ writel(val, pdata->regs_phy + reg->offset);
+}
+
+
+void otg_phy_init(struct dwc2_udc *dev)
+{
+ struct dwc2_plat_otg_data *pdata = dev->pdata;
+ struct rockchip_usb2_phy_cfg *phy_cfg = NULL;
+ struct rockchip_usb2_phy_dt_id *of_id;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rockchip_usb2_phy_dt_ids); i++) {
+ of_id = &rockchip_usb2_phy_dt_ids[i];
+ if (fdt_node_check_compatible(gd->fdt_blob, pdata->phy_of_node,
+ of_id->compatible) == 0) {
+ phy_cfg = (struct rockchip_usb2_phy_cfg *)of_id->data;
+ break;
+ }
+ }
+ if (!phy_cfg) {
+ debug("Can't find device platform data\n");
+
+ hang();
+ return;
+ }
+ pdata->priv = phy_cfg;
+ /* disable software control */
+ property_enable(pdata, &phy_cfg->soft_con, false);
+
+ /* reset otg port */
+ property_enable(pdata, &phy_cfg->port_reset, true);
+ mdelay(1);
+ property_enable(pdata, &phy_cfg->port_reset, false);
+ udelay(1);
+}
+
+void otg_phy_off(struct dwc2_udc *dev)
+{
+ struct dwc2_plat_otg_data *pdata = dev->pdata;
+ struct rockchip_usb2_phy_cfg *phy_cfg = pdata->priv;
+
+ /* enable software control */
+ property_enable(pdata, &phy_cfg->soft_con, true);
+ /* enter suspend */
+ property_enable(pdata, &phy_cfg->suspend, true);
+}
diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
index cc26f19..c6d88d9 100644
--- a/drivers/video/rockchip/rk_vop.c
+++ b/drivers/video/rockchip/rk_vop.c
@@ -238,7 +238,7 @@ int rk_display_init(struct udevice *dev, ulong fbbase,
return ret;
}
- ret = uclass_get_device(UCLASS_CLK, 0, &dev_clk);
+ ret = rockchip_get_clk(&dev_clk);
if (!ret) {
clk.id = DCLK_VOP0 + remote_vop_id;
ret = clk_request(dev_clk, &clk);
generated by cgit v1.1 at 2024-07-25 06:31:09 +0000