diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpio/Kconfig | 22 | ||||
-rw-r--r-- | drivers/gpio/Makefile | 2 | ||||
-rw-r--r-- | drivers/gpio/pca953x_gpio.c | 351 |
3 files changed, 375 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 2b4624d..e6337c2 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -143,4 +143,26 @@ config ZYNQ_GPIO help Supports GPIO access on Zynq SoC. +config DM_PCA953X + bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" + depends on DM_GPIO + help + Say yes here to provide access to several register-oriented + SMBus I/O expanders, made mostly by NXP or TI. Compatible + models include: + + 4 bits: pca9536, pca9537 + + 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, + pca9556, pca9557, pca9574, tca6408, xra1202 + + 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, + tca6416 + + 24 bits: tca6424 + + 40 bits: pca9505, pca9698 + + Now, max 24 bits chips and PCA953X compatible chips are + supported endmenu diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 4f071c4..4b1f6b9 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_AXP_GPIO) += axp_gpio.o endif obj-$(CONFIG_DM_GPIO) += gpio-uclass.o +obj-$(CONFIG_DM_PCA953X) += pca953x_gpio.o + obj-$(CONFIG_AT91_GPIO) += at91_gpio.o obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o obj-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o diff --git a/drivers/gpio/pca953x_gpio.c b/drivers/gpio/pca953x_gpio.c new file mode 100644 index 0000000..987d10e --- /dev/null +++ b/drivers/gpio/pca953x_gpio.c @@ -0,0 +1,351 @@ +/* + * Take linux kernel driver drivers/gpio/gpio-pca953x.c for reference. + * + * Copyright (C) 2016 Peng Fan <van.freenix@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +/* + * Note: + * The driver's compatible table is borrowed from Linux Kernel, + * but now max supported gpio pins is 24 and only PCA953X_TYPE + * is supported. PCA957X_TYPE is not supported now. + * Also the Polarity Inversion feature is not supported now. + * + * TODO: + * 1. Support PCA957X_TYPE + * 2. Support max 40 gpio pins + * 3. Support Plolarity Inversion + */ + +#include <common.h> +#include <errno.h> +#include <dm.h> +#include <fdtdec.h> +#include <i2c.h> +#include <malloc.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <dt-bindings/gpio/gpio.h> + +#define PCA953X_INPUT 0 +#define PCA953X_OUTPUT 1 +#define PCA953X_INVERT 2 +#define PCA953X_DIRECTION 3 + +#define PCA_GPIO_MASK 0x00FF +#define PCA_INT 0x0100 +#define PCA953X_TYPE 0x1000 +#define PCA957X_TYPE 0x2000 +#define PCA_TYPE_MASK 0xF000 +#define PCA_CHIP_TYPE(x) ((x) & PCA_TYPE_MASK) + +enum { + PCA953X_DIRECTION_IN, + PCA953X_DIRECTION_OUT, +}; + +#define MAX_BANK 3 +#define BANK_SZ 8 + +DECLARE_GLOBAL_DATA_PTR; + +/* + * struct pca953x_info - Data for pca953x + * + * @dev: udevice structure for the device + * @addr: i2c slave address + * @invert: Polarity inversion or not + * @gpio_count: the number of gpio pins that the device supports + * @chip_type: indicate the chip type,PCA953X or PCA957X + * @bank_count: the number of banks that the device supports + * @reg_output: array to hold the value of output registers + * @reg_direction: array to hold the value of direction registers + */ +struct pca953x_info { + struct udevice *dev; + int addr; + int invert; + int gpio_count; + int chip_type; + int bank_count; + u8 reg_output[MAX_BANK]; + u8 reg_direction[MAX_BANK]; +}; + +static int pca953x_write_single(struct udevice *dev, int reg, u8 val, + int offset) +{ + struct pca953x_info *info = dev_get_platdata(dev); + int bank_shift = fls((info->gpio_count - 1) / BANK_SZ); + int off = offset / BANK_SZ; + int ret = 0; + + ret = dm_i2c_write(dev, (reg << bank_shift) + off, &val, 1); + if (ret) { + dev_err(dev, "%s error\n", __func__); + return ret; + } + + return 0; +} + +static int pca953x_read_single(struct udevice *dev, int reg, u8 *val, + int offset) +{ + struct pca953x_info *info = dev_get_platdata(dev); + int bank_shift = fls((info->gpio_count - 1) / BANK_SZ); + int off = offset / BANK_SZ; + int ret; + u8 byte; + + ret = dm_i2c_read(dev, (reg << bank_shift) + off, &byte, 1); + if (ret) { + dev_err(dev, "%s error\n", __func__); + return ret; + } + + *val = byte; + + return 0; +} + +static int pca953x_read_regs(struct udevice *dev, int reg, u8 *val) +{ + struct pca953x_info *info = dev_get_platdata(dev); + int ret = 0; + + if (info->gpio_count <= 8) { + ret = dm_i2c_read(dev, reg, val, 1); + } else if (info->gpio_count <= 16) { + ret = dm_i2c_read(dev, reg << 1, val, info->bank_count); + } else { + dev_err(dev, "Unsupported now\n"); + return -EINVAL; + } + + return ret; +} + +static int pca953x_is_output(struct udevice *dev, int offset) +{ + struct pca953x_info *info = dev_get_platdata(dev); + + int bank = offset / BANK_SZ; + int off = offset % BANK_SZ; + + /*0: output; 1: input */ + return !(info->reg_direction[bank] & (1 << off)); +} + +static int pca953x_get_value(struct udevice *dev, unsigned offset) +{ + int ret; + u8 val = 0; + + ret = pca953x_read_single(dev, PCA953X_INPUT, &val, offset); + if (ret) + return ret; + + return (val >> offset) & 0x1; +} + +static int pca953x_set_value(struct udevice *dev, unsigned offset, + int value) +{ + struct pca953x_info *info = dev_get_platdata(dev); + int bank = offset / BANK_SZ; + int off = offset % BANK_SZ; + u8 val; + int ret; + + if (value) + val = info->reg_output[bank] | (1 << off); + else + val = info->reg_output[bank] & ~(1 << off); + + ret = pca953x_write_single(dev, PCA953X_OUTPUT, val, offset); + if (ret) + return ret; + + info->reg_output[bank] = val; + + return 0; +} + +static int pca953x_set_direction(struct udevice *dev, unsigned offset, int dir) +{ + struct pca953x_info *info = dev_get_platdata(dev); + int bank = offset / BANK_SZ; + int off = offset % BANK_SZ; + u8 val; + int ret; + + if (dir == PCA953X_DIRECTION_IN) + val = info->reg_direction[bank] | (1 << off); + else + val = info->reg_direction[bank] & ~(1 << off); + + ret = pca953x_write_single(dev, PCA953X_DIRECTION, val, offset); + if (ret) + return ret; + + info->reg_direction[bank] = val; + + return 0; +} + +static int pca953x_direction_input(struct udevice *dev, unsigned offset) +{ + return pca953x_set_direction(dev, offset, PCA953X_DIRECTION_IN); +} + +static int pca953x_direction_output(struct udevice *dev, unsigned offset, + int value) +{ + /* Configure output value. */ + pca953x_set_value(dev, offset, value); + + /* Configure direction as output. */ + pca953x_set_direction(dev, offset, PCA953X_DIRECTION_OUT); + + return 0; +} + +static int pca953x_get_function(struct udevice *dev, unsigned offset) +{ + if (pca953x_is_output(dev, offset)) + return GPIOF_OUTPUT; + else + return GPIOF_INPUT; +} + +static int pca953x_xlate(struct udevice *dev, struct gpio_desc *desc, + struct fdtdec_phandle_args *args) +{ + desc->offset = args->args[0]; + desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0; + + return 0; +} + +static const struct dm_gpio_ops pca953x_ops = { + .direction_input = pca953x_direction_input, + .direction_output = pca953x_direction_output, + .get_value = pca953x_get_value, + .set_value = pca953x_set_value, + .get_function = pca953x_get_function, + .xlate = pca953x_xlate, +}; + +static int pca953x_probe(struct udevice *dev) +{ + struct pca953x_info *info = dev_get_platdata(dev); + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct dm_i2c_chip *chip = dev_get_parent_platdata(dev); + char name[32], *str; + int addr; + ulong driver_data; + int ret; + + if (!info) { + dev_err(dev, "platdata not ready\n"); + return -ENOMEM; + } + + if (!chip) { + dev_err(dev, "i2c not ready\n"); + return -ENODEV; + } + + addr = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", 0); + if (addr == 0) + return -ENODEV; + + info->addr = addr; + + driver_data = dev_get_driver_data(dev); + + info->gpio_count = driver_data & PCA_GPIO_MASK; + if (info->gpio_count > MAX_BANK * BANK_SZ) { + dev_err(dev, "Max support %d pins now\n", MAX_BANK * BANK_SZ); + return -EINVAL; + } + + info->chip_type = PCA_CHIP_TYPE(driver_data); + if (info->chip_type != PCA953X_TYPE) { + dev_err(dev, "Only support PCA953X chip type now.\n"); + return -EINVAL; + } + + info->bank_count = DIV_ROUND_UP(info->gpio_count, BANK_SZ); + + ret = pca953x_read_regs(dev, PCA953X_OUTPUT, info->reg_output); + if (ret) { + dev_err(dev, "Error reading output register\n"); + return ret; + } + + ret = pca953x_read_regs(dev, PCA953X_DIRECTION, info->reg_direction); + if (ret) { + dev_err(dev, "Error reading direction register\n"); + return ret; + } + + snprintf(name, sizeof(name), "gpio@%x_", info->addr); + str = strdup(name); + if (!str) + return -ENOMEM; + uc_priv->bank_name = str; + uc_priv->gpio_count = info->gpio_count; + + dev_dbg(dev, "%s is ready\n", str); + + return 0; +} + +#define OF_953X(__nrgpio, __int) (ulong)(__nrgpio | PCA953X_TYPE | __int) +#define OF_957X(__nrgpio, __int) (ulong)(__nrgpio | PCA957X_TYPE | __int) + +static const struct udevice_id pca953x_ids[] = { + { .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), }, + { .compatible = "nxp,pca9534", .data = OF_953X(8, PCA_INT), }, + { .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9536", .data = OF_953X(4, 0), }, + { .compatible = "nxp,pca9537", .data = OF_953X(4, PCA_INT), }, + { .compatible = "nxp,pca9538", .data = OF_953X(8, PCA_INT), }, + { .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9554", .data = OF_953X(8, PCA_INT), }, + { .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), }, + { .compatible = "nxp,pca9556", .data = OF_953X(8, 0), }, + { .compatible = "nxp,pca9557", .data = OF_953X(8, 0), }, + { .compatible = "nxp,pca9574", .data = OF_957X(8, PCA_INT), }, + { .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), }, + { .compatible = "nxp,pca9698", .data = OF_953X(40, 0), }, + + { .compatible = "maxim,max7310", .data = OF_953X(8, 0), }, + { .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), }, + { .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), }, + { .compatible = "maxim,max7315", .data = OF_953X(8, PCA_INT), }, + + { .compatible = "ti,pca6107", .data = OF_953X(8, PCA_INT), }, + { .compatible = "ti,tca6408", .data = OF_953X(8, PCA_INT), }, + { .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), }, + { .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), }, + + { .compatible = "onsemi,pca9654", .data = OF_953X(8, PCA_INT), }, + + { .compatible = "exar,xra1202", .data = OF_953X(8, 0), }, + { } +}; + +U_BOOT_DRIVER(pca953x) = { + .name = "pca953x", + .id = UCLASS_GPIO, + .ops = &pca953x_ops, + .probe = pca953x_probe, + .platdata_auto_alloc_size = sizeof(struct pca953x_info), + .of_match = pca953x_ids, +}; |