summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/crypto/fsl/jr.c6
-rw-r--r--drivers/mmc/fsl_esdhc.c253
-rw-r--r--drivers/net/fsl-mc/mc.c10
-rw-r--r--drivers/net/ldpaa_eth/Makefile1
-rw-r--r--drivers/net/vsc9953.c14
5 files changed, 235 insertions, 49 deletions
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index 3fc418a..8bc517d 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -545,12 +545,12 @@ int sec_init(void)
/*
* Modifying CAAM Read/Write Attributes
- * For LS2080A and LS2085A
+ * For LS2080A
* For AXI Write - Cacheable, Write Back, Write allocate
* For AXI Read - Cacheable, Read allocate
- * Only For LS2080a and LS2085a, to solve CAAM coherency issues
+ * Only For LS2080a, to solve CAAM coherency issues
*/
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0xb << MCFGR_AWCACHE_SHIFT);
mcr = (mcr & ~MCFGR_ARCACHE_MASK) | (0x6 << MCFGR_ARCACHE_SHIFT);
#else
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index ea5f4bf..3acf9e8 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -20,6 +20,8 @@
#include <fsl_esdhc.h>
#include <fdt_support.h>
#include <asm/io.h>
+#include <dm.h>
+#include <asm-generic/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -72,6 +74,30 @@ struct fsl_esdhc {
uint scr; /* eSDHC control register */
};
+/**
+ * struct fsl_esdhc_priv
+ *
+ * @esdhc_regs: registers of the sdhc controller
+ * @sdhc_clk: Current clk of the sdhc controller
+ * @bus_width: bus width, 1bit, 4bit or 8bit
+ * @cfg: mmc config
+ * @mmc: mmc
+ * Following is used when Driver Model is enabled for MMC
+ * @dev: pointer for the device
+ * @non_removable: 0: removable; 1: non-removable
+ * @cd_gpio: gpio for card detection
+ */
+struct fsl_esdhc_priv {
+ struct fsl_esdhc *esdhc_regs;
+ unsigned int sdhc_clk;
+ unsigned int bus_width;
+ struct mmc_config cfg;
+ struct mmc *mmc;
+ struct udevice *dev;
+ int non_removable;
+ struct gpio_desc cd_gpio;
+};
+
/* Return the XFERTYP flags for a given command and data packet */
static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
{
@@ -118,8 +144,8 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
static void
esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
{
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc_priv *priv = mmc->priv;
+ struct fsl_esdhc *regs = priv->esdhc_regs;
uint blocks;
char *buffer;
uint databuf;
@@ -180,8 +206,8 @@ esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
{
int timeout;
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc_priv *priv = mmc->priv;
+ struct fsl_esdhc *regs = priv->esdhc_regs;
#ifdef CONFIG_FSL_LAYERSCAPE
dma_addr_t addr;
#endif
@@ -312,8 +338,8 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
int err = 0;
uint xfertyp;
uint irqstat;
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc_priv *priv = mmc->priv;
+ struct fsl_esdhc *regs = priv->esdhc_regs;
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
@@ -482,9 +508,9 @@ out:
static void set_sysctl(struct mmc *mmc, uint clock)
{
int div, pre_div;
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
- int sdhc_clk = cfg->sdhc_clk;
+ struct fsl_esdhc_priv *priv = mmc->priv;
+ struct fsl_esdhc *regs = priv->esdhc_regs;
+ int sdhc_clk = priv->sdhc_clk;
uint clk;
if (clock < mmc->cfg->f_min)
@@ -527,8 +553,8 @@ static void set_sysctl(struct mmc *mmc, uint clock)
#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
static void esdhc_clock_control(struct mmc *mmc, bool enable)
{
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc_priv *priv = mmc->priv;
+ struct fsl_esdhc *regs = priv->esdhc_regs;
u32 value;
u32 time_out;
@@ -556,8 +582,8 @@ static void esdhc_clock_control(struct mmc *mmc, bool enable)
static void esdhc_set_ios(struct mmc *mmc)
{
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc_priv *priv = mmc->priv;
+ struct fsl_esdhc *regs = priv->esdhc_regs;
#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
/* Select to use peripheral clock */
@@ -580,8 +606,8 @@ static void esdhc_set_ios(struct mmc *mmc)
static int esdhc_init(struct mmc *mmc)
{
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc_priv *priv = mmc->priv;
+ struct fsl_esdhc *regs = priv->esdhc_regs;
int timeout = 1000;
/* Reset the entire host controller */
@@ -621,14 +647,23 @@ static int esdhc_init(struct mmc *mmc)
static int esdhc_getcd(struct mmc *mmc)
{
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc_priv *priv = mmc->priv;
+ struct fsl_esdhc *regs = priv->esdhc_regs;
int timeout = 1000;
#ifdef CONFIG_ESDHC_DETECT_QUIRK
if (CONFIG_ESDHC_DETECT_QUIRK)
return 1;
#endif
+
+#ifdef CONFIG_DM_MMC
+ if (priv->non_removable)
+ return 1;
+
+ if (dm_gpio_is_valid(&priv->cd_gpio))
+ return dm_gpio_get_value(&priv->cd_gpio);
+#endif
+
while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
udelay(1000);
@@ -656,16 +691,29 @@ static const struct mmc_ops esdhc_ops = {
.getcd = esdhc_getcd,
};
-int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
+static int fsl_esdhc_cfg_to_priv(struct fsl_esdhc_cfg *cfg,
+ struct fsl_esdhc_priv *priv)
+{
+ if (!cfg || !priv)
+ return -EINVAL;
+
+ priv->esdhc_regs = (struct fsl_esdhc *)(unsigned long)(cfg->esdhc_base);
+ priv->bus_width = cfg->max_bus_width;
+ priv->sdhc_clk = cfg->sdhc_clk;
+
+ return 0;
+};
+
+static int fsl_esdhc_init(struct fsl_esdhc_priv *priv)
{
struct fsl_esdhc *regs;
struct mmc *mmc;
u32 caps, voltage_caps;
- if (!cfg)
- return -1;
+ if (!priv)
+ return -EINVAL;
- regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ regs = priv->esdhc_regs;
/* First reset the eSDHC controller */
esdhc_reset(regs);
@@ -676,7 +724,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
#endif
writel(SDHCI_IRQ_EN_BITS, &regs->irqstaten);
- memset(&cfg->cfg, 0, sizeof(cfg->cfg));
+ memset(&priv->cfg, 0, sizeof(priv->cfg));
voltage_caps = 0;
caps = esdhc_read32(&regs->hostcapblt);
@@ -698,47 +746,83 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
if (caps & ESDHC_HOSTCAPBLT_VS33)
voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
- cfg->cfg.name = "FSL_SDHC";
- cfg->cfg.ops = &esdhc_ops;
+ priv->cfg.name = "FSL_SDHC";
+ priv->cfg.ops = &esdhc_ops;
#ifdef CONFIG_SYS_SD_VOLTAGE
- cfg->cfg.voltages = CONFIG_SYS_SD_VOLTAGE;
+ priv->cfg.voltages = CONFIG_SYS_SD_VOLTAGE;
#else
- cfg->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+ priv->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
#endif
- if ((cfg->cfg.voltages & voltage_caps) == 0) {
+ if ((priv->cfg.voltages & voltage_caps) == 0) {
printf("voltage not supported by controller\n");
return -1;
}
- cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
+ if (priv->bus_width == 8)
+ priv->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
+ else if (priv->bus_width == 4)
+ priv->cfg.host_caps = MMC_MODE_4BIT;
+
+ priv->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
#ifdef CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
- cfg->cfg.host_caps |= MMC_MODE_DDR_52MHz;
+ priv->cfg.host_caps |= MMC_MODE_DDR_52MHz;
#endif
- if (cfg->max_bus_width > 0) {
- if (cfg->max_bus_width < 8)
- cfg->cfg.host_caps &= ~MMC_MODE_8BIT;
- if (cfg->max_bus_width < 4)
- cfg->cfg.host_caps &= ~MMC_MODE_4BIT;
+ if (priv->bus_width > 0) {
+ if (priv->bus_width < 8)
+ priv->cfg.host_caps &= ~MMC_MODE_8BIT;
+ if (priv->bus_width < 4)
+ priv->cfg.host_caps &= ~MMC_MODE_4BIT;
}
if (caps & ESDHC_HOSTCAPBLT_HSS)
- cfg->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ priv->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK
if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK)
- cfg->cfg.host_caps &= ~MMC_MODE_8BIT;
+ priv->cfg.host_caps &= ~MMC_MODE_8BIT;
#endif
- cfg->cfg.f_min = 400000;
- cfg->cfg.f_max = min(cfg->sdhc_clk, (u32)52000000);
+ priv->cfg.f_min = 400000;
+ priv->cfg.f_max = min(priv->sdhc_clk, (u32)52000000);
- cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+ priv->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
- mmc = mmc_create(&cfg->cfg, cfg);
+ mmc = mmc_create(&priv->cfg, priv);
if (mmc == NULL)
return -1;
+ priv->mmc = mmc;
+
+ return 0;
+}
+
+int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
+{
+ struct fsl_esdhc_priv *priv;
+ int ret;
+
+ if (!cfg)
+ return -EINVAL;
+
+ priv = calloc(sizeof(struct fsl_esdhc_priv), 1);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = fsl_esdhc_cfg_to_priv(cfg, priv);
+ if (ret) {
+ debug("%s xlate failure\n", __func__);
+ free(priv);
+ return ret;
+ }
+
+ ret = fsl_esdhc_init(priv);
+ if (ret) {
+ debug("%s init failure\n", __func__);
+ free(priv);
+ return ret;
+ }
+
return 0;
}
@@ -819,3 +903,92 @@ void fdt_fixup_esdhc(void *blob, bd_t *bd)
4 + 1, 1);
}
#endif
+
+#ifdef CONFIG_DM_MMC
+#include <asm/arch/clock.h>
+static int fsl_esdhc_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+ const void *fdt = gd->fdt_blob;
+ int node = dev->of_offset;
+ fdt_addr_t addr;
+ unsigned int val;
+ int ret;
+
+ addr = dev_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->esdhc_regs = (struct fsl_esdhc *)addr;
+ priv->dev = dev;
+
+ val = fdtdec_get_int(fdt, node, "bus-width", -1);
+ if (val == 8)
+ priv->bus_width = 8;
+ else if (val == 4)
+ priv->bus_width = 4;
+ else
+ priv->bus_width = 1;
+
+ if (fdt_get_property(fdt, node, "non-removable", NULL)) {
+ priv->non_removable = 1;
+ } else {
+ priv->non_removable = 0;
+ gpio_request_by_name_nodev(fdt, node, "cd-gpios", 0,
+ &priv->cd_gpio, GPIOD_IS_IN);
+ }
+
+ /*
+ * TODO:
+ * Because lack of clk driver, if SDHC clk is not enabled,
+ * need to enable it first before this driver is invoked.
+ *
+ * we use MXC_ESDHC_CLK to get clk freq.
+ * If one would like to make this function work,
+ * the aliases should be provided in dts as this:
+ *
+ * aliases {
+ * mmc0 = &usdhc1;
+ * mmc1 = &usdhc2;
+ * mmc2 = &usdhc3;
+ * mmc3 = &usdhc4;
+ * };
+ * Then if your board only supports mmc2 and mmc3, but we can
+ * correctly get the seq as 2 and 3, then let mxc_get_clock
+ * work as expected.
+ */
+ priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq);
+ if (priv->sdhc_clk <= 0) {
+ dev_err(dev, "Unable to get clk for %s\n", dev->name);
+ return -EINVAL;
+ }
+
+ ret = fsl_esdhc_init(priv);
+ if (ret) {
+ dev_err(dev, "fsl_esdhc_init failure\n");
+ return ret;
+ }
+
+ upriv->mmc = priv->mmc;
+
+ return 0;
+}
+
+static const struct udevice_id fsl_esdhc_ids[] = {
+ { .compatible = "fsl,imx6ul-usdhc", },
+ { .compatible = "fsl,imx6sx-usdhc", },
+ { .compatible = "fsl,imx6sl-usdhc", },
+ { .compatible = "fsl,imx6q-usdhc", },
+ { .compatible = "fsl,imx7d-usdhc", },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(fsl_esdhc) = {
+ .name = "fsl-esdhc-mmc",
+ .id = UCLASS_MMC,
+ .of_match = fsl_esdhc_ids,
+ .probe = fsl_esdhc_probe,
+ .priv_auto_alloc_size = sizeof(struct fsl_esdhc_priv),
+};
+#endif
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index d2b8b5c..1811b0f 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -356,6 +356,12 @@ static unsigned long get_mc_boot_timeout_ms(void)
}
#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+
+__weak bool soc_has_aiop(void)
+{
+ return false;
+}
+
static int load_mc_aiop_img(u64 aiop_fw_addr)
{
u64 mc_ram_addr = mc_get_dram_addr();
@@ -363,6 +369,9 @@ static int load_mc_aiop_img(u64 aiop_fw_addr)
void *aiop_img;
#endif
+ /* Check if AIOP is available */
+ if (!soc_has_aiop())
+ return -ENODEV;
/*
* Load the MC AIOP image in the MC private DRAM block:
*/
@@ -1235,6 +1244,7 @@ static int do_fsl_mc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
aiop_fw_addr = simple_strtoull(argv[3], NULL,
16);
+ /* if SoC doesn't have AIOP, err = -ENODEV */
err = load_mc_aiop_img(aiop_fw_addr);
if (!err)
printf("fsl-mc: AIOP FW applied\n");
diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile
index 74c4916..5587aa6 100644
--- a/drivers/net/ldpaa_eth/Makefile
+++ b/drivers/net/ldpaa_eth/Makefile
@@ -7,4 +7,3 @@
obj-y += ldpaa_wriop.o
obj-y += ldpaa_eth.o
obj-$(CONFIG_LS2080A) += ls2080a.o
-obj-$(CONFIG_LS2085A) += ls2080a.o
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
index 44afe14..2388438 100644
--- a/drivers/net/vsc9953.c
+++ b/drivers/net/vsc9953.c
@@ -335,7 +335,7 @@ static int vsc9953_port_vlan_pvid_get(int port_nr, int *pvid)
struct vsc9953_analyzer *l2ana_reg;
/* Administrative down */
- if (vsc9953_l2sw.port[port_nr].enabled) {
+ if (!vsc9953_l2sw.port[port_nr].enabled) {
printf("Port %d is administrative down\n", port_nr);
return -1;
}
@@ -2525,6 +2525,9 @@ void vsc9953_init(bd_t *bis)
if (vsc9953_port_init(i))
printf("Failed to initialize l2switch port %d\n", i);
+ if (!vsc9953_l2sw.port[i].enabled)
+ continue;
+
/* Enable VSC9953 GMII Ports Port ID 0 - 7 */
if (VSC9953_INTERNAL_PORT_CHECK(i)) {
out_le32(&l2ana_reg->pfc[i].pfc_cfg,
@@ -2537,6 +2540,11 @@ void vsc9953_init(bd_t *bis)
out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
VSC9953_MAC_FC_CFG);
}
+
+ l2dev_gmii_reg = (struct vsc9953_dev_gmii *)
+ (VSC9953_OFFSET + VSC9953_DEV_GMII_OFFSET +
+ T1040_SWITCH_GMII_DEV_OFFSET * i);
+
out_le32(&l2dev_gmii_reg->port_mode.clock_cfg,
VSC9953_CLOCK_CFG);
out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg,
@@ -2559,10 +2567,6 @@ void vsc9953_init(bd_t *bis)
/* WAIT FOR 2 us*/
udelay(2);
- l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(
- (char *)l2dev_gmii_reg
- + T1040_SWITCH_GMII_DEV_OFFSET);
-
/* Initialize Lynx PHY Wrappers */
phy_addr = 0;
if (vsc9953_l2sw.port[i].enet_if ==
generated by cgit v1.1 at 2024-11-22 07:19:18 +0000