summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/vsc9953.c349
1 files changed, 165 insertions, 184 deletions
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
index 59e0fab..bf53535 100644
--- a/drivers/net/vsc9953.c
+++ b/drivers/net/vsc9953.c
@@ -14,6 +14,7 @@
#include <errno.h>
#include <malloc.h>
#include <vsc9953.h>
+#include <ethsw.h>
static struct vsc9953_info vsc9953_l2sw = {
.port[0] = VSC9953_PORT_INFO_INITIALIZER(0),
@@ -405,6 +406,165 @@ static void vsc9953_port_all_vlan_egress_untagged_set(
vsc9953_port_vlan_egr_untag_set(i, mode);
}
+#ifdef CONFIG_CMD_ETHSW
+
+/* Enable/disable status of a VSC9953 port */
+static void vsc9953_port_status_set(int port_no, u8 enabled)
+{
+ struct vsc9953_qsys_reg *l2qsys_reg;
+
+ /* Administrative down */
+ if (!vsc9953_l2sw.port[port_no].enabled)
+ return;
+
+ l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
+ VSC9953_QSYS_OFFSET);
+
+ if (enabled)
+ setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
+ VSC9953_PORT_ENA);
+ else
+ clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
+ VSC9953_PORT_ENA);
+}
+
+/* Start autonegotiation for a VSC9953 PHY */
+static void vsc9953_phy_autoneg(int port_no)
+{
+ if (!vsc9953_l2sw.port[port_no].phydev)
+ return;
+
+ if (vsc9953_l2sw.port[port_no].phydev->drv->startup(
+ vsc9953_l2sw.port[port_no].phydev))
+ printf("Failed to start PHY for port %d\n", port_no);
+}
+
+/* Print a VSC9953 port's configuration */
+static void vsc9953_port_config_show(int port_no)
+{
+ int speed;
+ int duplex;
+ int link;
+ u8 enabled;
+ u32 val;
+ struct vsc9953_qsys_reg *l2qsys_reg;
+
+ l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
+ VSC9953_QSYS_OFFSET);
+
+ val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]);
+ enabled = vsc9953_l2sw.port[port_no].enabled &&
+ (val & VSC9953_PORT_ENA);
+
+ /* internal ports (8 and 9) are fixed */
+ if (VSC9953_INTERNAL_PORT_CHECK(port_no)) {
+ link = 1;
+ speed = SPEED_2500;
+ duplex = DUPLEX_FULL;
+ } else {
+ if (vsc9953_l2sw.port[port_no].phydev) {
+ link = vsc9953_l2sw.port[port_no].phydev->link;
+ speed = vsc9953_l2sw.port[port_no].phydev->speed;
+ duplex = vsc9953_l2sw.port[port_no].phydev->duplex;
+ } else {
+ link = -1;
+ speed = -1;
+ duplex = -1;
+ }
+ }
+
+ printf("%8d ", port_no);
+ printf("%8s ", enabled == 1 ? "enabled" : "disabled");
+ printf("%8s ", link == 1 ? "up" : "down");
+
+ switch (speed) {
+ case SPEED_10:
+ printf("%8d ", 10);
+ break;
+ case SPEED_100:
+ printf("%8d ", 100);
+ break;
+ case SPEED_1000:
+ printf("%8d ", 1000);
+ break;
+ case SPEED_2500:
+ printf("%8d ", 2500);
+ break;
+ case SPEED_10000:
+ printf("%8d ", 10000);
+ break;
+ default:
+ printf("%8s ", "-");
+ }
+
+ printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half");
+}
+
+static int vsc9953_port_status_key_func(struct ethsw_command_def *parsed_cmd)
+{
+ int i;
+ u8 enabled;
+
+ /* Last keyword should tell us if we should enable/disable the port */
+ if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] ==
+ ethsw_id_enable)
+ enabled = 1;
+ else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] ==
+ ethsw_id_disable)
+ enabled = 0;
+ else
+ return CMD_RET_USAGE;
+
+ if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) {
+ if (!VSC9953_PORT_CHECK(parsed_cmd->port)) {
+ printf("Invalid port number: %d\n", parsed_cmd->port);
+ return CMD_RET_FAILURE;
+ }
+ vsc9953_port_status_set(parsed_cmd->port, enabled);
+ } else {
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_port_status_set(i, enabled);
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+static int vsc9953_port_config_key_func(struct ethsw_command_def *parsed_cmd)
+{
+ int i;
+
+ if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) {
+ if (!VSC9953_PORT_CHECK(parsed_cmd->port)) {
+ printf("Invalid port number: %d\n", parsed_cmd->port);
+ return CMD_RET_FAILURE;
+ }
+ vsc9953_phy_autoneg(parsed_cmd->port);
+ printf("%8s %8s %8s %8s %8s\n",
+ "Port", "Status", "Link", "Speed",
+ "Duplex");
+ vsc9953_port_config_show(parsed_cmd->port);
+
+ } else {
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_phy_autoneg(i);
+ printf("%8s %8s %8s %8s %8s\n",
+ "Port", "Status", "Link", "Speed", "Duplex");
+ for (i = 0; i < VSC9953_MAX_PORTS; i++)
+ vsc9953_port_config_show(i);
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+static struct ethsw_command_func vsc9953_cmd_func = {
+ .ethsw_name = "L2 Switch VSC9953",
+ .port_enable = &vsc9953_port_status_key_func,
+ .port_disable = &vsc9953_port_status_key_func,
+ .port_show = &vsc9953_port_config_key_func,
+};
+
+#endif /* CONFIG_CMD_ETHSW */
+
/*****************************************************************************
At startup, the default configuration would be:
- HW learning enabled on all ports; (HW default)
@@ -563,190 +723,11 @@ void vsc9953_init(bd_t *bis)
vsc9953_default_configuration();
+#ifdef CONFIG_CMD_ETHSW
+ if (ethsw_define_functions(&vsc9953_cmd_func) < 0)
+ debug("Unable to use \"ethsw\" commands\n");
+#endif
+
printf("VSC9953 L2 switch initialized\n");
return;
}
-
-#ifdef CONFIG_VSC9953_CMD
-/* Enable/disable status of a VSC9953 port */
-static void vsc9953_port_status_set(int port_no, u8 enabled)
-{
- struct vsc9953_qsys_reg *l2qsys_reg;
-
- /* Administrative down */
- if (!vsc9953_l2sw.port[port_no].enabled)
- return;
-
- l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
- VSC9953_QSYS_OFFSET);
-
- if (enabled)
- setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
- VSC9953_PORT_ENA);
- else
- clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
- VSC9953_PORT_ENA);
-}
-
-/* Set all VSC9953 ports' status */
-static void vsc9953_port_all_status_set(u8 enabled)
-{
- int i;
-
- for (i = 0; i < VSC9953_MAX_PORTS; i++)
- vsc9953_port_status_set(i, enabled);
-}
-
-/* Start autonegotiation for a VSC9953 PHY */
-static void vsc9953_phy_autoneg(int port_no)
-{
- if (!vsc9953_l2sw.port[port_no].phydev)
- return;
-
- if (vsc9953_l2sw.port[port_no].phydev->drv->startup(
- vsc9953_l2sw.port[port_no].phydev))
- printf("Failed to start PHY for port %d\n", port_no);
-}
-
-/* Start autonegotiation for all VSC9953 PHYs */
-static void vsc9953_phy_all_autoneg(void)
-{
- int i;
-
- for (i = 0; i < VSC9953_MAX_PORTS; i++)
- vsc9953_phy_autoneg(i);
-}
-
-/* Print a VSC9953 port's configuration */
-static void vsc9953_port_config_show(int port_no)
-{
- int speed;
- int duplex;
- int link;
- u8 enabled;
- u32 val;
- struct vsc9953_qsys_reg *l2qsys_reg;
-
- l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
- VSC9953_QSYS_OFFSET);
-
- val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]);
- enabled = vsc9953_l2sw.port[port_no].enabled &&
- (val & VSC9953_PORT_ENA);
-
- /* internal ports (8 and 9) are fixed */
- if (VSC9953_INTERNAL_PORT_CHECK(port_no)) {
- link = 1;
- speed = SPEED_2500;
- duplex = DUPLEX_FULL;
- } else {
- if (vsc9953_l2sw.port[port_no].phydev) {
- link = vsc9953_l2sw.port[port_no].phydev->link;
- speed = vsc9953_l2sw.port[port_no].phydev->speed;
- duplex = vsc9953_l2sw.port[port_no].phydev->duplex;
- } else {
- link = -1;
- speed = -1;
- duplex = -1;
- }
- }
-
- printf("%8d ", port_no);
- printf("%8s ", enabled == 1 ? "enabled" : "disabled");
- printf("%8s ", link == 1 ? "up" : "down");
-
- switch (speed) {
- case SPEED_10:
- printf("%8d ", 10);
- break;
- case SPEED_100:
- printf("%8d ", 100);
- break;
- case SPEED_1000:
- printf("%8d ", 1000);
- break;
- case SPEED_2500:
- printf("%8d ", 2500);
- break;
- case SPEED_10000:
- printf("%8d ", 10000);
- break;
- default:
- printf("%8s ", "-");
- }
-
- printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half");
-}
-
-/* Print VSC9953 ports' configuration */
-static void vsc9953_port_all_config_show(void)
-{
- int i;
-
- for (i = 0; i < VSC9953_MAX_PORTS; i++)
- vsc9953_port_config_show(i);
-}
-
-/* function to interpret commands starting with "ethsw " */
-static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- u8 enable;
- u32 port;
-
- if (argc < 4)
- return -1;
-
- if (strcmp(argv[1], "port"))
- return -1;
-
- if (!strcmp(argv[3], "show")) {
- if (!strcmp(argv[2], "all")) {
- vsc9953_phy_all_autoneg();
- printf("%8s %8s %8s %8s %8s\n",
- "Port", "Status", "Link", "Speed",
- "Duplex");
- vsc9953_port_all_config_show();
- return 0;
- } else {
- port = simple_strtoul(argv[2], NULL, 10);
- if (!VSC9953_PORT_CHECK(port))
- return -1;
- vsc9953_phy_autoneg(port);
- printf("%8s %8s %8s %8s %8s\n",
- "Port", "Status", "Link", "Speed",
- "Duplex");
- vsc9953_port_config_show(port);
- return 0;
- }
- } else if (!strcmp(argv[3], "enable")) {
- enable = 1;
- } else if (!strcmp(argv[3], "disable")) {
- enable = 0;
- } else {
- return -1;
- }
-
- if (!strcmp(argv[2], "all")) {
- vsc9953_port_all_status_set(enable);
- return 0;
- } else {
- port = simple_strtoul(argv[2], NULL, 10);
- if (!VSC9953_PORT_CHECK(port))
- return -1;
- vsc9953_port_status_set(port, enable);
- return 0;
- }
-
- return -1;
-}
-
-U_BOOT_CMD(ethsw, 5, 0, do_ethsw,
- "vsc9953 l2 switch commands",
- "port <port_no> enable|disable\n"
- " - enable/disable an l2 switch port\n"
- " port_no=0..9; use \"all\" for all ports\n"
- "ethsw port <port_no> show\n"
- " - show an l2 switch port's configuration\n"
- " port_no=0..9; use \"all\" for all ports\n"
-);
-#endif /* CONFIG_VSC9953_CMD */
generated by cgit v1.1 at 2024-12-26 02:29:26 +0000