diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/omap24xx_i2c.c | 78 |
1 files changed, 42 insertions, 36 deletions
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index d176b5d..35201c3 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -218,7 +218,7 @@ read_exit: static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) { int i2c_error = 0; - u16 status, stat; + u16 status; /* wait until bus not busy */ wait_for_bb (); @@ -231,49 +231,55 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP, &i2c_base->con); - /* wait until state change */ - status = wait_for_pin (); - - if (status & I2C_STAT_XRDY) { -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ - defined(CONFIG_OMAP44XX) - /* send out 1 byte */ - writeb (regoffset, &i2c_base->data); - writew (I2C_STAT_XRDY, &i2c_base->stat); - - status = wait_for_pin (); - if ((status & I2C_STAT_XRDY)) { - /* send out next 1 byte */ - writeb (value, &i2c_base->data); - writew (I2C_STAT_XRDY, &i2c_base->stat); - } else { + while (1) { + status = wait_for_pin(); + if (status == 0 || status & I2C_STAT_NACK) { i2c_error = 1; + goto write_exit; } + if (status & I2C_STAT_XRDY) { +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) + /* send register offset */ + writeb(regoffset, &i2c_base->data); + writew(I2C_STAT_XRDY, &i2c_base->stat); + + while (1) { + status = wait_for_pin(); + if (status == 0 || status & I2C_STAT_NACK) { + i2c_error = 1; + goto write_exit; + } + if (status & I2C_STAT_XRDY) { + /* send data */ + writeb(value, &i2c_base->data); + writew(I2C_STAT_XRDY, &i2c_base->stat); + } + if (status & I2C_STAT_ARDY) { + writew(I2C_STAT_ARDY, &i2c_base->stat); + break; + } + } + break; #else - /* send out two bytes */ - writew ((value << 8) + regoffset, &i2c_base->data); + /* send out two bytes */ + writew((value << 8) + regoffset, &i2c_base->data); + writew(I2C_STAT_XRDY, &i2c_base->stat); #endif - /* must have enough delay to allow BB bit to go low */ - udelay (50000); - if (readw (&i2c_base->stat) & I2C_STAT_NACK) { - i2c_error = 1; } - } else { - i2c_error = 1; + if (status & I2C_STAT_ARDY) { + writew(I2C_STAT_ARDY, &i2c_base->stat); + break; + } } - if (!i2c_error) { - int eout = 200; + wait_for_bb(); - writew (I2C_CON_EN, &i2c_base->con); - while ((stat = readw (&i2c_base->stat)) || (readw (&i2c_base->con) & I2C_CON_MST)) { - udelay (1000); - /* have to read to clear intrrupt */ - writew (0xFFFF, &i2c_base->stat); - if(--eout == 0) /* better leave with error than hang */ - break; - } - } + status = readw(&i2c_base->stat); + if (status & I2C_STAT_NACK) + i2c_error = 1; + +write_exit: flush_fifo(); writew (0xFFFF, &i2c_base->stat); writew (0, &i2c_base->cnt); |