diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/omap24xx_i2c.c | 17 | ||||
| -rw-r--r-- | drivers/i2c/omap24xx_i2c.h | 166 |
2 files changed, 180 insertions, 3 deletions
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index ff18991..3256133 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -25,6 +25,8 @@ #include <asm/arch/i2c.h> #include <asm/io.h> +#include "omap24xx_i2c.h" + static void wait_for_bb (void); static u16 wait_for_pin (void); static void flush_fifo(void); @@ -176,7 +178,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) status = wait_for_pin (); if (status & I2C_STAT_RRDY) { -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) *value = readb (&i2c_base->data); #else *value = readw (&i2c_base->data); @@ -221,7 +224,8 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) status = wait_for_pin (); if (status & I2C_STAT_XRDY) { -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) /* send out 1 byte */ writeb (regoffset, &i2c_base->data); writew (I2C_STAT_XRDY, &i2c_base->stat); @@ -274,7 +278,8 @@ static void flush_fifo(void) while(1){ stat = readw(&i2c_base->stat); if(stat == I2C_STAT_RRDY){ -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) readb(&i2c_base->data); #else readw(&i2c_base->data); @@ -435,3 +440,9 @@ int i2c_set_bus_num(unsigned int bus) return 0; } + +int i2c_get_bus_num(void) +{ + return (int) current_bus; +} + diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h new file mode 100644 index 0000000..92a3416 --- /dev/null +++ b/drivers/i2c/omap24xx_i2c.h @@ -0,0 +1,166 @@ +/* + * (C) Copyright 2004-2010 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_I2C_H_ +#define _OMAP24XX_I2C_H_ + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_GC_IE (1 << 5) +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_GC (1 << 5) +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ + +/* I2C Buffer Configuration Register (I2C_BUF): */ + +#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ +#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 15) /* I2C module enable */ +#define I2C_CON_BE (1 << 14) /* Big endian mode */ +#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */ + /* (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ + +/* I2C System Test Register (I2C_SYSTEST): */ + +#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ +#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode, on brkpoint) */ +#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ +#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ +#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ +#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ +#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ +#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ + +#define I2C_SCLL_SCLL 0 +#define I2C_SCLL_SCLL_M 0xFF +#define I2C_SCLL_HSSCLL 8 +#define I2C_SCLH_HSSCLL_M 0xFF +#define I2C_SCLH_SCLH 0 +#define I2C_SCLH_SCLH_M 0xFF +#define I2C_SCLH_HSSCLH 8 +#define I2C_SCLH_HSSCLH_M 0xFF + +#define OMAP_I2C_STANDARD 100000 +#define OMAP_I2C_FAST_MODE 400000 +#define OMAP_I2C_HIGH_SPEED 3400000 + +#define SYSTEM_CLOCK_12 12000000 +#define SYSTEM_CLOCK_13 13000000 +#define SYSTEM_CLOCK_192 19200000 +#define SYSTEM_CLOCK_96 96000000 + +/* Use the reference value of 96MHz if not explicitly set by the board */ +#ifndef I2C_IP_CLK +#define I2C_IP_CLK SYSTEM_CLOCK_96 +#endif + +/* + * The reference minimum clock for high speed is 19.2MHz. + * The linux 2.6.30 kernel uses this value. + * The reference minimum clock for fast mode is 9.6MHz + * The reference minimum clock for standard mode is 4MHz + * In TRM, the value of 12MHz is used. + */ +#ifndef I2C_INTERNAL_SAMPLING_CLK +#define I2C_INTERNAL_SAMPLING_CLK 19200000 +#endif + +/* + * The equation for the low and high time is + * tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed + * thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed + * + * If the duty cycle is 50% + * + * tlow = scll + scll_trim = sampling clock / (2 * speed) + * thigh = sclh + sclh_trim = sampling clock / (2 * speed) + * + * In TRM + * scll_trim = 7 + * sclh_trim = 5 + * + * The linux 2.6.30 kernel uses + * scll_trim = 6 + * sclh_trim = 6 + * + * These are the trim values for standard and fast speed + */ +#ifndef I2C_FASTSPEED_SCLL_TRIM +#define I2C_FASTSPEED_SCLL_TRIM 6 +#endif +#ifndef I2C_FASTSPEED_SCLH_TRIM +#define I2C_FASTSPEED_SCLH_TRIM 6 +#endif + +/* These are the trim values for high speed */ +#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM +#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM +#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM +#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM +#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM +#endif + +#define I2C_PSC_MAX 0x0f +#define I2C_PSC_MIN 0x00 + +#endif /* _OMAP24XX_I2C_H_ */ |