summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/nand/omap_gpmc.c33
1 files changed, 16 insertions, 17 deletions
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 89e8b1c..99b9cef 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -30,7 +30,6 @@
#include <nand.h>
static uint8_t cs;
-static struct gpmc *gpmc_base = (struct gpmc *)GPMC_BASE;
static struct nand_ecclayout hw_nand_oob = GPMC_NAND_HW_ECC_LAYOUT;
/*
@@ -48,13 +47,13 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd,
*/
switch (ctrl) {
case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
- this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_cmd;
+ this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
break;
case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
- this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_adr;
+ this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_adr;
break;
case NAND_CTRL_CHANGE | NAND_NCE:
- this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_dat;
+ this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
break;
}
@@ -74,8 +73,8 @@ static void omap_hwecc_init(struct nand_chip *chip)
* Init ECC Control Register
* Clear all ECC | Enable Reg1
*/
- writel(ECCCLEAR | ECCRESULTREG1, &gpmc_base->ecc_control);
- writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, &gpmc_base->ecc_size_config);
+ writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
+ writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, &gpmc_cfg->ecc_size_config);
}
/*
@@ -178,7 +177,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
u_int32_t val;
/* Start Reading from HW ECC1_Result = 0x200 */
- val = readl(&gpmc_base->ecc1_result);
+ val = readl(&gpmc_cfg->ecc1_result);
ecc_code[0] = val & 0xFF;
ecc_code[1] = (val >> 16) & 0xFF;
@@ -188,7 +187,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
* Stop reading anymore ECC vals and clear old results
* enable will be called if more reads are required
*/
- writel(0x000, &gpmc_base->ecc_config);
+ writel(0x000, &gpmc_cfg->ecc_config);
return 0;
}
@@ -207,7 +206,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
case NAND_ECC_READ:
case NAND_ECC_WRITE:
/* Clear the ecc result registers, select ecc reg as 1 */
- writel(ECCCLEAR | ECCRESULTREG1, &gpmc_base->ecc_control);
+ writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
/*
* Size 0 = 0xFF, Size1 is 0xFF - both are 512 bytes
@@ -215,9 +214,9 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
* we just have a single ECC engine for all CS
*/
writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL,
- &gpmc_base->ecc_size_config);
+ &gpmc_cfg->ecc_size_config);
val = (dev_width << 7) | (cs << 1) | (0x1);
- writel(val, &gpmc_base->ecc_config);
+ writel(val, &gpmc_cfg->ecc_config);
break;
default:
printf("Error: Unrecognized Mode[%d]!\n", mode);
@@ -311,7 +310,7 @@ int board_nand_init(struct nand_chip *nand)
*/
while (cs < GPMC_MAX_CS) {
/* Check if NAND type is set */
- if ((readl(&gpmc_base->cs[cs].config1) & 0xC00) == 0x800) {
+ if ((readl(&gpmc_cfg->cs[cs].config1) & 0xC00) == 0x800) {
/* Found it!! */
break;
}
@@ -323,18 +322,18 @@ int board_nand_init(struct nand_chip *nand)
return -ENODEV;
}
- gpmc_config = readl(&gpmc_base->config);
+ gpmc_config = readl(&gpmc_cfg->config);
/* Disable Write protect */
gpmc_config |= 0x10;
- writel(gpmc_config, &gpmc_base->config);
+ writel(gpmc_config, &gpmc_cfg->config);
- nand->IO_ADDR_R = (void __iomem *)&gpmc_base->cs[cs].nand_dat;
- nand->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_cmd;
+ nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
+ nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
nand->cmd_ctrl = omap_nand_hwcontrol;
nand->options = NAND_NO_PADDING | NAND_CACHEPRG | NAND_NO_AUTOINCR;
/* If we are 16 bit dev, our gpmc config tells us that */
- if ((readl(&gpmc_base->cs[cs].config1) & 0x3000) == 0x1000)
+ if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
nand->options |= NAND_BUSWIDTH_16;
nand->chip_delay = 100;